15-22 Dodge Challenger Rear Pads & Rotors Replacement
HTML-код
- Опубликовано: 25 авг 2024
- For V6 non AWD single piston caliper cars (see fitment guide in link): amzn.to/468YkcY
For V6 Dual piston calipers, AWD, and some V8/R/T models (see fitment guide in link): www.amazon.com...
Front video: • 15-22 Dodge Challenger...
Jack Stands: amzn.to/3WalfiZ
Jack: amzn.to/3iZRxPL
Tire Iron: amzn.to/3V0sARy
Impact Gun that I use: amzn.to/3UQQNcP
Electric Ratchet I recommend (mine was discontinued): amzn.to/3Yl0HpS
Items I use regularly in these videos:
Main Camera (smartphone): amzn.to/36NioIv
Secondary Camera (action cam): amzn.to/3LknjQg
Laptop Computer: TBA
Computer Editing: TBA
Editing App: TBA
Phone Stand/Tripod: TBA
Micro SD Card: amzn.to/3tKheoV
As an Amazon Associate, I earn from qualifying purchases. 
Авто/Мото
Awesome vid! Just did my first brake and rotor job recently on my Honda Fit. The rear end uses disc brakes so I hope to tackle that sooner than later.
I had that yellow and green lock tight on my factory bolts too.the pedal reset info was very helpful preventing me from making a mistake.
I learned the hard way with the pedal part lol, years ago.
@@BuckeyeBallistics that wouldn't be lol for me...I would have pumped that bitch to the floor then be very upset with myself. Both your walk through videos on this where great thx for the help.
I like your videos. The brakes all look straight forward. I have done many brakes in the 40some years since I started working on cars at 13 yoa. I figure since these videos are available, why not check them out before you do your own, in case of anything 'Weird' with the model you are working on. Thankfully there isn't but Thanks for the video!
One suggestion. Try using rubber gloves while working on the car. It took me a while to get used to them but they really save your hands from drying out and your skin cracking! My hands started drying out from hand cleaners when I turned 50. It might save you from some painful cracks along your fingernails! In the winter time those cracks are Awful!
Ya'll Take Care and Happy Hotrodding on your Challenger! -John
Great video, thank you! I have to take her (2018 RT Plus Shaker 6 spd 4 piston Brembo) to the shop but I learned so much from watching you.
Dude. Life saver. Perfect video!
Thanks for the torque specs was lookin for that
👍 Thanks for actually watching enough of the video to find it instead of just asking like everyone else does. I tell them to go back and watch it again 😅
Question: Any reason why one brake caliper would be easy to press in but the other extremely hard?
Either the caliper is starting to fail, or the brake hose is. If you open the bleeder and then depress the piston (all the way) and it is hard at all to push in at any point, then it is the caliper. If it's easy with the bleeder open, then it is the hose. Regardless, it is one or the other. If you do this to check, you will need to properly bleed the brakes after (on that caliper).
@@BuckeyeBallisticsbleed all the calibers air likes to go up lines
How were those bracket bolts coming out of the rear. The fronts were a PIA. I am taking a few days break to heal my muscles before tackling the rear.
I don't recall, I would have mentioned it in the video. I don't think they were as bad...
Link for this brake kit?
Brake Motive for some reason has stopped selling brakes. I have used Detroit Axles products in the past satisfactorily: www.detroitaxle.com/parts/2019-dodge-challenger/brake_rotors-drums/?drive_type_name=AWD
🇺🇸🇺🇸