I really appreciate this video, I live in California & am doing research to find a building method that will be a good option for me after losing my home to a wildfire. This was really helpful, thanks!
So sorry Dr. Juko for the tragedy. I'm also doing research on various building technologies and sharing what I learn on this channel. I'm glad the video was of help to you.
For outer was plastering, cladding solves that problem on ground floor walls and wallmaster on top floor walls. In my view , EPS savings come in the form of savings from pilferage by fundis, stones are an easy target for that, you only have cement and sand to watch over. They also give you savings in terms of time, which is money. For a commercial building, which means earlier occupancy and consequently faster realization of ROI.
Great sir.Fluent,audible,clear.They need columns at appropriate designed areas.Ringbeams and reinforcement for suspended floors.A friend was undertaking a one storey project with EPS but had no columns,ringbeams,irregular reinforcement on upper first floor,poor staircase,was very devastating and irritating to the eye.But you have brought out best.
Exactly Brian. EPS isn't meant as a replacement to proper building design and construction. The building procedures must be followed to ensure safe structures. Thanks for your remarks!
@@PropertyNoma Pluss: Don't get me wrong: The video is great as a introduction to the system. But in order to be up to standards in USA, there are actually 2 standards. One ICC code for Federal and one California standard which is much stringent. There is only one manufacturer which cover both standards. The wires mesh are 2.5 mm not 2.3, the cross wire is 3.00 mm not 2,5 mm the the mesh is 50 mm X 50 mm not 100 X 100 or even 100 X 50 mm , the distance between EPS slab and the mesh is 1 inch not a couple of mm. The structural integrity is much different. Even the EPS or GPS material density is different. " The right material for the right country"
Thank you for sharing. How much would it cost to build a simple 3 bedroom bungalow? How durable is it? Is it easy for robbers or natural disasters to destroy it?
Hello. Can I use PES for roof deck slab? Can it carry water tank if reinforced with steel underneath the area that will carry additional weight? Thank you!
Hi Rickomba, it's in my plans as I'm trying to look for unpainted EPS structures. Finding them is a challenge but I know they exist. I'll publish a video once I discover one.
What if while you are assembling the panel and before you shotcrete it rains and the steal matting gets rust, would it affect the panel's integrity in bearing load/strength ?
Hi Hamir, it's best to choose an EPS panel that has galvanized steel mesh. Galvanization adds a layer of zinc that reduces the rate of rusting of steel. Most EPS companies use galvanized steel for the mesh but it's always better to confirm first. If the steel mesh rusts during installation, then it can impact the structural integrity of the structure. Storing the panels in a dry area is a good preventive measure.
That is the reason for Galvanized wire mesh or "special order" stainless steel/ There are also solutions which you spray which instantly dissolve the rust before concrete application.
More reinforcement bars and higher strength concrete can be added to the panels to add more structural strength. The panels can be designed to suit specific climate conditions. A structural engineer will provide you with a suitable design depending on where you live.
Can you speak to the functionality of EPS floor panels for house that is being raised off the ground on pilings? Can you use the EPS floor panels for the main floor if it is off the ground? Thanks for making this video. I learned a lot.
You will need to create a troff/ tray from your existing floor or create one on the top of the pilons. then you pour 3 to 4 inch of shot-create (3 sacks sand 1 sack of Portland cement). Immediately float a 3d-eps panel and vibrate it until the wires sunk and the eps float on top of cement. Install your 17 inch rebar on the ends for connection of walls also for the interior walls. From that point , regular 3d-EPS construction. Pour 4 inch of the same combination sand and cement, Make sure the pillions are design to support the weight,
I've seen example where the regular wall panels were used on a roof slab and placed on a metal beam system, you can add a 7 cm concrete layer for more safety if needed. But I haven't tried it yet
Av a few questions, can one build a 5 storey residential building with the EPS panels only without concrete pillars of steel bars, like upper floor slabs entirely built with EPS panels, and how easy is it to cut out a door or drill holes on the wall later on in future if one needs to do some modifications like add an extra window
From the research I've done, you can do a 4-storey building with EPS panels. But you can go higher if you include beams and pillars. The structural engineer can advise you on your project. Modifications can be done in future using concrete drilling and cutting machines. It's not easy to cut through concrete but it is possible.
@@PropertyNoma I've contacted several manufacturers in this field and they said the EPS is not load bearing so you can't use it to hold slab or multi stories!! I don't know how stable you building will be in your case
@@mohamadjouma . The VGA panel manufacturer in Mexico built a 7 story high Ramada Inn hotel , no pillars , which went true a 7.0 Righter scale. NOT A SCRATCH and that was made with a mesh only 3 mm from the EPS therefore much less concrete.
Heavy reliance on concrete to achieve strength (expensive). EPS panels can cost more after plastering when compared to conventional materials. Requires a contractor who specializes in EPS panels (difficult to find, more expensive). EPS panels may not be available in your area. These are some of the disadvantages I can think of.
This is usually determined during the design stage of construction. Roofs mostly carry live loads, e.g rain or wind with a factor of safety included. Once the loads are determined, the thickness of concrete plaster can be determined for the EPS panels.
it look shaky n shady. also not many have experence. how long it last or workers do they know how to do it? mwenda bole hufika so better to use stones and brigs.even if it take 1 year bora mtu akue safe sio porojo ya copy copy how things is done in the foreingn countrys. vijanaa tunataka kazi so heri mjengo we work in quarre or load the stones in de lorry and digging sand n break kokotos and dif fondation.
EPS = Concrete + steel mesh, which are capable of withholding to a certain degree such kind of forces. It depends with the concrete strength you'll use.
Hi Oluoch, when I was doing my research, I found out that it would cost Ksh 400-600,000 for a 3 bedroom house. So for a one bedroom house, it's much lower than that estimate. For accurate quotations, please contact the EPS manufacturers. Links are in the description.
@@PropertyNoma Hi, and between the 3 companies you have mentioned towards the end of your presentation who would you advice is the most economical to work with and still maintain that quality touch?
@@davemwas1874 The best approach is to request a quotation from all 3 companies and see the most economical. In terms of quality, they're pretty much the same because EPS panels are pre-engineered construction materials
I don't have any sites. I'm a part time content creator focusing on the real estate niche. I'm doing the research and sharing what I discover on the channel
I really appreciate this video, I live in California & am doing research to find a building method that will be a good option for me after losing my home to a wildfire. This was really helpful, thanks!
So sorry Dr. Juko for the tragedy. I'm also doing research on various building technologies and sharing what I learn on this channel. I'm glad the video was of help to you.
I built my house with EPS panels in Baja California. The best decision ever for my family and I.
The insulative value is amazing also. We spend very little on cooling and heating
@@sethhack899 what company did you use? We have Strata International in Phoenix, Az that does eps with concrete.
Check out Alrine house built in south India recently. Video is on RUclips.
Awesome video! Our future is bright 🙌🌞
Thanks!
We are planning to construct our house with epc technology... what is your suggestions
Do you have a multiple floor building I could bench mark on.
For outer was plastering, cladding solves that problem on ground floor walls and wallmaster on top floor walls. In my view , EPS savings come in the form of savings from pilferage by fundis, stones are an easy target for that, you only have cement and sand to watch over.
They also give you savings in terms of time, which is money. For a commercial building, which means earlier occupancy and consequently faster realization of ROI.
i think you have a very good idea
❤
Great sir.Fluent,audible,clear.They need columns at appropriate designed areas.Ringbeams and reinforcement for suspended floors.A friend was undertaking a one storey project with EPS but had no columns,ringbeams,irregular reinforcement on upper first floor,poor staircase,was very devastating and irritating to the eye.But you have brought out best.
Exactly Brian. EPS isn't meant as a replacement to proper building design and construction. The building procedures must be followed to ensure safe structures. Thanks for your remarks!
@@PropertyNoma Pluss: Don't get me wrong: The video is great as a introduction to the system. But in order to be up to standards in USA, there are actually 2 standards. One ICC code for Federal and one California standard which is much stringent. There is only one manufacturer which cover both standards. The wires mesh are 2.5 mm not 2.3, the cross wire is 3.00 mm not 2,5 mm the the mesh is 50 mm X 50 mm not 100 X 100 or even 100 X 50 mm , the distance between EPS slab and the mesh is 1 inch not a couple of mm. The structural integrity is much different. Even the EPS or GPS material density is different.
" The right material for the right country"
Hi there good day,how can be layout or install to slab.what mean how to secured it in both edges of the beam.do you have video for my concern..thanks
I don't have an installation video yet but you can watch this video to learn more about the floor EPS panel: ruclips.net/video/p4xiuMJlgG4/видео.html
Great video! Very relevant, concise, covers the bases. I like your strategy. Shoot vids nyingi. This will fly!
Thanks, it means a lot. Yes, I'll keep publishing more and more videos
Thank you for sharing. How much would it cost to build a simple 3 bedroom bungalow? How durable is it? Is it easy for robbers or natural disasters to destroy it?
Eps panels get their strength from concrete. Once concrete hardens, it's difficult to get through it.
Very helpful, might be good to offer an opinion on the insulation qualities vs others.
This is M2 Panel sir? Its available here in the Philippines. Its been used here for more than 30 years now
Thanks for the information Gabriel.
Hello. Can I use PES for roof deck slab? Can it carry water tank if reinforced with steel underneath the area that will carry additional weight?
Thank you!
Yes it can as long as its designed by your structural engineer
@@PropertyNoma Many thanks for your response sir!
This was amazing information thanks
even as a content creator you should be able to share contacts for interested persons
educative... i have been following eps building technology for quite a while now but it isnt popular in my country now.
Thanks for the information Peter
where are you located sir? We are starting this technology in several countries in Africa
You mentioned in video that on shotcreate doing concrete first, what is ratio of concrete and what size you use aggregate
Typically 4 of sand and 1 of cement but it is best to consult with your EPS supplier
Would the house be generally cooler when using EPS compared to using concrete hollowblocks?
You could say that theoretically but I haven't come across a study comparing the two materials in thermal tests
@@PropertyNoma With 3D-GPS we can get R 62.
Hey Nick, Would you be able to do a video of finished structures using the EPS technology.
Hi Rickomba, it's in my plans as I'm trying to look for unpainted EPS structures. Finding them is a challenge but I know they exist. I'll publish a video once I discover one.
@@PropertyNoma Liaise with cimax. They have a catalogue of buildings they have done using eps.
They also act as good Thermal insulators and reduce outdoor noise
Yes, those are some of the benefits of expanded polystyrene
What are the machines do we need to do plaster using shotcreet.
A shotcrete gun
@@PropertyNoma Do you have any idea? Where can we get?
@@MadAboutConstruction I don't really know. Maybe if you're in Kenya you can check from CMax Kenya.
What if while you are assembling the panel and before you shotcrete it rains and the steal matting gets rust, would it affect the panel's integrity in bearing load/strength ?
Hi Hamir, it's best to choose an EPS panel that has galvanized steel mesh. Galvanization adds a layer of zinc that reduces the rate of rusting of steel. Most EPS companies use galvanized steel for the mesh but it's always better to confirm first.
If the steel mesh rusts during installation, then it can impact the structural integrity of the structure. Storing the panels in a dry area is a good preventive measure.
If rust will show in wire mesh, spay with a rust inhibitor which transform the rust in to primer.
That is the reason for Galvanized wire mesh or "special order" stainless steel/ There are also solutions which you spray which instantly dissolve the rust before concrete application.
Polystyrene is burns very easily..how is EPS any different..is it a fire hazard?
The EPS material is self-extinguishing. In addition, the concrete cover that is plastered onto the EPS panels provides the fire resistance required.
What about storms, such as hurricanes?
More reinforcement bars and higher strength concrete can be added to the panels to add more structural strength. The panels can be designed to suit specific climate conditions. A structural engineer will provide you with a suitable design depending on where you live.
great videos. what software is this you use to present the videos?
Videoscribe
@@PropertyNoma thanks . Will contact you when I construct my house using eps for documentation
@@Ryan-pq8nf Alright
Great video man thanks.
Glad you liked it!
It's useful bro,thanks
What if i decide to do a renovation in future like knocking out a wall what happens?
If it's a load bearing wall, you'll have to do some consultations first with your architect before doing any demolition
hi can one use the traditional bricks on the outside and use the eps for partioning
Yes it is possible but you should consult earlier with your architect to get your idea incorporated into your house design
Can you speak to the functionality of EPS floor panels for house that is being raised off the ground on pilings? Can you use the EPS floor panels for the main floor if it is off the ground? Thanks for making this video. I learned a lot.
You will need to create a troff/ tray from your existing floor or create one on the top of the pilons. then you pour 3 to 4 inch of shot-create (3 sacks sand 1 sack of Portland cement). Immediately float a 3d-eps panel and vibrate it until the wires sunk and the eps float on top of cement. Install your 17 inch rebar on the ends for connection of walls also for the interior walls. From that point , regular 3d-EPS construction. Pour 4 inch of the same combination sand and cement, Make sure the pillions are design to support the weight,
I've seen example where the regular wall panels were used on a roof slab and placed on a metal beam system, you can add a 7 cm concrete layer for more safety if needed. But I haven't tried it yet
@@georgesararu9945Where are you situated. Looking for a EPS builder in Cape Town
Thanks
What is the cost using the same to build a perimeter wall of a plot of 135ft by 65ft?
Last time a check was $6.00 per square feet.
Av a few questions, can one build a 5 storey residential building with the EPS panels only without concrete pillars of steel bars, like upper floor slabs entirely built with EPS panels, and how easy is it to cut out a door or drill holes on the wall later on in future if one needs to do some modifications like add an extra window
From the research I've done, you can do a 4-storey building with EPS panels. But you can go higher if you include beams and pillars. The structural engineer can advise you on your project. Modifications can be done in future using concrete drilling and cutting machines. It's not easy to cut through concrete but it is possible.
@@PropertyNoma cool, thank you, this is a great video, will watch more of your videos, very enlightening
@@PropertyNoma I've contacted several manufacturers in this field and they said the EPS is not load bearing so you can't use it to hold slab or multi stories!! I don't know how stable you building will be in your case
@@mohamadjouma . The VGA panel manufacturer in Mexico built a 7 story high Ramada Inn hotel , no pillars , which went true a 7.0 Righter scale. NOT A SCRATCH and that was made with a mesh only 3 mm from the EPS therefore much less concrete.
@@mohamadjouma You'll need load bearing supports - beams, columns and the foundation.
Fire is the problem.. better go with traditional.
You compare a 3 hour fire rating material with a conventional ,,,no fire rating" and get to ..."better go conventional". ...You lost me somewhere!
What are the disadvantages?
Heavy reliance on concrete to achieve strength (expensive). EPS panels can cost more after plastering when compared to conventional materials. Requires a contractor who specializes in EPS panels (difficult to find, more expensive). EPS panels may not be available in your area.
These are some of the disadvantages I can think of.
What is load bearing capacity of roof ?
This is usually determined during the design stage of construction. Roofs mostly carry live loads, e.g rain or wind with a factor of safety included. Once the loads are determined, the thickness of concrete plaster can be determined for the EPS panels.
it look shaky n shady. also not many have experence. how long it last or workers do they know how to do it? mwenda bole hufika so better to use stones and brigs.even if it take 1 year bora mtu akue safe sio porojo ya copy copy how things is done in the foreingn countrys. vijanaa tunataka kazi so heri mjengo we work in quarre or load the stones in de lorry and digging sand n break kokotos and dif fondation.
EPS vs guns and sledge hammer?
EPS = Concrete + steel mesh, which are capable of withholding to a certain degree such kind of forces. It depends with the concrete strength you'll use.
how much can it cost to build a one bedroom house using this technology?
Hi Oluoch, when I was doing my research, I found out that it would cost Ksh 400-600,000 for a 3 bedroom house. So for a one bedroom house, it's much lower than that estimate. For accurate quotations, please contact the EPS manufacturers. Links are in the description.
@@PropertyNoma Hi, and between the 3 companies you have mentioned towards the end of your presentation who would you advice is the most economical to work with and still maintain that quality touch?
@@davemwas1874 The best approach is to request a quotation from all 3 companies and see the most economical. In terms of quality, they're pretty much the same because EPS panels are pre-engineered construction materials
@@PropertyNomawow thank you so much umeni save
Nonsense.. my friend used then in 2014..Lol.. poor results and expensive.. don't try...
A panel should cost 2k
Not 5k..6k
Can I have your contacts I want to visit your sites
I don't have any sites. I'm a part time content creator focusing on the real estate niche. I'm doing the research and sharing what I discover on the channel
@@PropertyNoma how can we talk?