ALL GOOD BANTER GUYS GLAD YOU (may) GET THE WELSH HUMOUR, keep up the good work and keep me Laughing as I go through my treatment in hospital Peace&Love from Wales UK x
Just clicked in without looking who posted it, heard him say “I’m photogromer” and kind of lost it haha, didn’t realize I was watching to someone I was already subbed to 😂
sometimes a normal things looks turns like unnormal in treating those things like automotive mechanics, thus race tuned setup were I've never tried that before in my life whether from my amateur specs were already to be tries with my own analytical studies
Whatsup man. Love the channel. I have a question. I just bought a 2018 grom and I’m loving ittttt. The only problem is I’m hearing a tiny bit of ticking from the engine ? Is this normal? I might bring it back to the dealership
If it’s brand new that’d be alarming. Depending on how much you want to check on your own but you can take the following steps. Check the oil level. Adjust the valves. Take off the top valve cover and insure it’s pumping oil when the bike is running. Break down the top end and replace the piston and cylinder jug. If it’s used it could have been wheelies or ran without enough oil which causes the piston to rub against the cylinder and that’s where you get the tick or knocking sound. But if it’s brand new it could just be the valves need adjusting.
Photogromer sounds like I’m bringing it back to the dealership lol. Is it bad to ride the bike until then ? Gotta wait for my dad to get back from vaca to put it on his truck bed
It is more durable (better metal quality) - so will last longer/more consistent high Quality JAPAN bearings machining ect.. The crankshaft mod is for more stability (more strengthening bottom end wise).
@@Photogromer thanks for answer, I did a mistake and took out wrong bolt for oilchange, then the spring come out, after I started it again it was just like it jumped over 1 teeth, can it do that easy like that? I took all appart and inside and can now just move it easy with my finger, I am used to cars where the tentioner are much tighter. So it just made me wondering if I did something wrong 😊
If it looks like mine in the video I guess it’s okay. Maybe the tensioner chain stretched out? It’s hard to say without putting hands on it but I’d just compare what looks like the slack in my video and others to yours. Make tensioner arm is rotated down to the chain and start her up. If everything sounds good you should be ok.
@@Photogromer Thanks again. I will try again tomorrow, its a brand new bike so all should be tight, maybe me who just messed it up, us it the TD- center's first or secound mark on flywheel I shoul use for set the timing chain again? Sorry to bother you. 😊 this was las question 😊🛵 by the way you got some cool videos, I live in Thai but are Norwegian, so it's an Wave 110i I work on, but its just 100% same system 🛵👍
I was about to say why didn't you lube it up then I realized... Oh shit I'm a dumbass the fucking oil goes in there haha.
ALL GOOD BANTER GUYS GLAD YOU (may) GET THE WELSH HUMOUR, keep up the good work and keep me Laughing as I go through my treatment in hospital Peace&Love from Wales UK x
Just clicked in without looking who posted it, heard him say “I’m photogromer” and kind of lost it haha, didn’t realize I was watching to someone I was already subbed to 😂
thank you
Can't wait to see it start up and get fine tuned
Your content is very good.
Brazil passed by here.
#Brazil
Good stuff, thanks guys!
#TeamSnap #TeamPatreon great episode guys can't wait to see this project finished!
sometimes a normal things looks turns like unnormal in treating those things like automotive mechanics,
thus race tuned setup were I've never tried that before in my life whether from my amateur specs were already to be tries with my own analytical studies
nice video 👍🏻 cheers from germany 🍻
If the oil plunger what you said people mistakenly take out thinking it’s the oil will it matter on putting it back in with spring ? On 6:53
Nice grom
The white cap.. mine won’t go in all the way just rest on it.. should I force it in?
Did you guys forget to put the needle bearing on the crankshaft that fits into the back of the flywheel?
Whatsup man. Love the channel. I have a question. I just bought a 2018 grom and I’m loving ittttt. The only problem is I’m hearing a tiny bit of ticking from the engine ? Is this normal? I might bring it back to the dealership
If it’s brand new that’d be alarming. Depending on how much you want to check on your own but you can take the following steps. Check the oil level. Adjust the valves. Take off the top valve cover and insure it’s pumping oil when the bike is running. Break down the top end and replace the piston and cylinder jug. If it’s used it could have been wheelies or ran without enough oil which causes the piston to rub against the cylinder and that’s where you get the tick or knocking sound. But if it’s brand new it could just be the valves need adjusting.
Photogromer sounds like I’m bringing it back to the dealership lol. Is it bad to ride the bike until then ? Gotta wait for my dad to get back from vaca to put it on his truck bed
I mean it’ll just get worst if it’s one of the above. Shrugs. Not going to explode just do more damage
When does the new video come out for fifth gear and the crank??
What does the upgraded cam tensioner do performance wise?
It is more durable (better metal quality) - so will last longer/more consistent high Quality JAPAN bearings machining ect.. The crankshaft mod is for more stability (more strengthening bottom end wise).
Would the timing mark move when you remove the flywheel?
I feel my tentioner is a bit loose, not much pressure on it with that spring, is that normal?
Did you check the tensioner bolt on the bottom of the engine case next to the oil drain plug to make sure it wasn't loose?
@@Photogromer thanks for answer, I did a mistake and took out wrong bolt for oilchange, then the spring come out, after I started it again it was just like it jumped over 1 teeth, can it do that easy like that? I took all appart and inside and can now just move it easy with my finger, I am used to cars where the tentioner are much tighter. So it just made me wondering if I did something wrong 😊
If it looks like mine in the video I guess it’s okay. Maybe the tensioner chain stretched out? It’s hard to say without putting hands on it but I’d just compare what looks like the slack in my video and others to yours. Make tensioner arm is rotated down to the chain and start her up. If everything sounds good you should be ok.
@@Photogromer Thanks again. I will try again tomorrow, its a brand new bike so all should be tight, maybe me who just messed it up, us it the TD- center's first or secound mark on flywheel I shoul use for set the timing chain again? Sorry to bother you. 😊 this was las question 😊🛵 by the way you got some cool videos, I live in Thai but are Norwegian, so it's an Wave 110i I work on, but its just 100% same system 🛵👍
are you going to be selling those stock to not tshirts?
Maybe looking into patches, I'd like to do some garage style mechanic shirts
nice mic distortion:D
Lol the viagra commercial!!!
Can you put the Mic a bit away from your Head please?
Hi
Hey
If you guys could shake the camera around some more while filming I'll be able to fully throw up
Groovy Shoos wahhhhhhhhh
koso tension makes to much noise
why did i got an ad for viagra on your thumbnail ?
do you guys play PubG on xbox? Im bibibosh so look me up. ill accept and ps, im aussie ;)
username bibibosh ... xbox
i also play fortnite ... so add me on xbox - bibibosh .....
Take that gun and throw it as far away from photogromer does he even own a torque wrench???
Apparently you didn’t watch this episode
The hell is an "ugah dugah" anyway?
Hi