Missing is the retrieval of time from the GPS to set the RTC clock. The satellite has a more accurate time and could set itself each time it is launched. Well done!
hi, do you need a Sim card to make it work or you can simply buy this components without buying a sim? I don't understand if this is able to track a device which contained this or not. Is it necessary to buy a SIM800L??? thank you
thank you for the video, i just got one of these. how did you connect the external receiver to the main sensor board ? do you just push the end of the wire that is attached to the external receiver into the round socket on the main board ?
Hi logMaker360. I would like to ask if this module can be used under canopy which is under the oil palm plantation area? how accurate it can be?. Thank you
Sorry I can't help you with this one. Every envirment is different. You need to test it yourself. All I can say is that it comparable with an cellphone gps.
Hey Carlos, its gives the exact coordinates through, and much more information. It is preprogrammed. Look at this video probelly there is also altutude in there. Read the manual;)
Is het mogelijk om deze gps module te gebruiken met arduino die verboden is met android smart tv box? Ik begrijp niet zo goed hoe ik het op mijn android apparaat moet programmeren. Alvast bedankt. Mvg
Hi Can u tell me is it possible to improve my accuracy by using 2 GPS module NEO - 6 M (comparing information)? I mean in Arduino or create app in Delphi XE8 or C#, or any other methodes?
Great video Thanks a lot. I have an issue , in my GY-NEO6MV2 the LED flashes(red) only once guess it's not getting a fix because i should get the LED (green) as yours. I read some where that the on board battery needs to be charged which takes around 1-2 hours. is that correct?
Is it me, or is your diagram wrong...you said in the video you need the 4.7K resistor on RX...green wire...but in your figure, green is connected to Analog 3...which you are calling TX. The audio makes more sense than the diagram (i.e. I would understand why you want to limit the current going into RX...). Nice video nonetheless.
Good explanation.........But It is showing that the code is no longer available when I clicked on that link you had attached in the description....Can you please upload an another link through which I can get the code??
Muy buen video. aunque dificil de traducir, me gustaria saber que implementos uso aparte del arduino y el modulo GPS ya que por mas que intento no logro entender.
zou het mogelijk zijn om deze code te veranderen zo dat je ook de snelheid kan loggen. ik wil hem op de quad racer zetten om de snelheid te meten.groet uit de stad ;-)
Hey Arjun, Text files are very low in memory I think on a 2 GB file you can store information like this for weeks. And you can scale the memory size. There are SD cards with 128 GB out there
If you're gonna use a CSV file you might as well make a csv file from the start... Why generate some other file and then have to convert it later? dataFile = SD.open("gpsLOG.csv", FILE_WRITE); if (dataFile) { dataFile.println(String(lat,6)+","+String(lon,6)+","+String(now.hour())+":"String(now.minute())+":"+String(now.second())); dataFile.close(); // print to the serial port too: Serial.println("data stored"); }
yes! but my idea is different. i would like to use my phone as transmitter and GPS module as receiver for my project. then i can operate from any where. now 'Lloyd AC' having this kind of options.
for good ether behavior Yes. Read this... www.thethingsnetwork.org/forum/t/limitations-data-rate-packet-size-30-seconds-uplink-and-10-messages-downlink-per-day-fair-access-policy/1300
Anti car theft could be good. Just send the position every 5 min or so? When there is lora signal it should me enough. But it's something else then gps tracking you did in this video.
Bro you really need the gy-neo6mv2, functions used are specific to this module. www.bitsandparts.eu/documentation/151/TinyGPSPlus.zip you can see full examples of the code here, hope this helps dude.
www.bitsandparts.eu/documentation/151/TinyGPSPlus.zip I think this is it, inside the zip file are also folders to example code blocks. Sorry for the late response mate :D
EXXXXXCELENT ! THANK YOU =]
Missing is the retrieval of time from the GPS to set the RTC clock. The satellite has a more accurate time and could set itself each time it is launched. Well done!
Bedankt, deze video was erg behulpzaam mijn vriend.☺😷👍
can u help me a bit? why the output said that RTC is not running and also card failed or not present? what should i do?
hi, do you need a Sim card to make it work or you can simply buy this components without buying a sim?
I don't understand if this is able to track a device which contained this or not.
Is it necessary to buy a SIM800L???
thank you
thank you for the video, i just got one of these. how did you connect the external receiver to the main sensor board ? do you just push the end of the wire that is attached to the external receiver into the round socket on the main board ?
You mean the atenna? Thats a coax connector be careful with that. Yes you can press it on top op it.
The schematic TX=4 and RX =3 , in the sketch 3 and 2 ?!
Ok, I see that you included this question in the code :) THANKS
By using this device ,can we deploye the data to the database at real time
Hi logMaker360. I would like to ask if this module can be used under canopy which is under the oil palm plantation area? how accurate it can be?. Thank you
Sorry I can't help you with this one. Every envirment is different. You need to test it yourself. All I can say is that it comparable with an cellphone gps.
Hi, i have some questions, do you know how much error it has in meters? and, does it gives you the heigh?
Hey Carlos, its gives the exact coordinates through, and much more information. It is preprogrammed. Look at this video probelly there is also altutude in there. Read the manual;)
Is het mogelijk om deze gps module te gebruiken met arduino die verboden is met android smart tv box? Ik begrijp niet zo goed hoe ik het op mijn android apparaat moet programmeren.
Alvast bedankt.
Mvg
please wich simulator do yo use for simulation ? i've use 123D circuits but i didn't find GY-NEO6MV2
Fritzing
Hi
Can u tell me is it possible to improve my accuracy by using 2 GPS module NEO - 6 M (comparing information)?
I mean in Arduino or create app in Delphi XE8 or C#, or any other methodes?
Hi Alex, no I can not. I have no experience with that.
I want to be able to make each pass darker and darker.. to show how many times I've been on a certain street..
I need the library files without library it's not working
Great video Thanks a lot. I have an issue , in my GY-NEO6MV2 the LED flashes(red) only once guess it's not getting a fix because i should get the LED (green) as yours. I read some where that the on board battery needs to be charged which takes around 1-2 hours. is that correct?
hello! Did you solve it?
Yes, It just needed the clear open sky for few minutes .
Is it me, or is your diagram wrong...you said in the video you need the 4.7K resistor on RX...green wire...but in your figure, green is connected to Analog 3...which you are calling TX. The audio makes more sense than the diagram (i.e. I would understand why you want to limit the current going into RX...). Nice video nonetheless.
Good explanation.........But It is showing that the code is no longer available when I clicked on that link you had attached in the description....Can you please upload an another link through which I can get the code??
Just checked it in google chrome browser and it still works
Muy buen video. aunque dificil de traducir, me gustaria saber que implementos uso aparte del arduino y el modulo GPS ya que por mas que intento no logro entender.
zou het mogelijk zijn om deze code te veranderen zo dat je ook de snelheid kan loggen. ik wil hem op de quad racer zetten om de snelheid te meten.groet uit de stad ;-)
natuurlijk kan dat in de code. Dat is gewoon wiskunde. Je ziet dat bijvoorbeeld op een tom tom.
WOULDN'T THE SD CARD RUN OUT OF SPACE AFTER SOME TIME OF OPERATING
Hey Arjun,
Text files are very low in memory I think on a 2 GB file you can store information like this for weeks. And you can scale the memory size. There are SD cards with 128 GB out there
I'm getting a "double" negative on the longitude. such as: -80.-788157 Any help is greatly appreciated!
can this use as car tracking theft system?
Awesome thank you, but my tiny GPS module is not working. red led is not on while power up please give me solution
i cant find the source code in the given link.can you give me the link please?
create.arduino.cc/editor/LogMaker360/89ad9ca8-73a4-4b5e-94e5-b361937812da/preview
Thank you man!!!!
You were real helpful :D
If you're gonna use a CSV file you might as well make a csv file from the start... Why generate some other file and then have to convert it later?
dataFile = SD.open("gpsLOG.csv", FILE_WRITE);
if (dataFile) {
dataFile.println(String(lat,6)+","+String(lon,6)+","+String(now.hour())+":"String(now.minute())+":"+String(now.second()));
dataFile.close();
// print to the serial port too:
Serial.println("data stored");
}
can we operate this with mobile phone... plz reply
Why would you, all smartphones have there own gps??
yes! but my idea is different. i would like to use my phone as transmitter and GPS module as receiver for my project. then i can operate from any where. now 'Lloyd AC' having this kind of options.
Hi, it might me a cool thing to send the data
of the GPS to the all things network with lora?
Yes but we can not send unlimed LoRa messages ):
what do you mean by that? Is there a limit on how many messages you can send using LoRa?
for good ether behavior Yes. Read this...
www.thethingsnetwork.org/forum/t/limitations-data-rate-packet-size-30-seconds-uplink-and-10-messages-downlink-per-day-fair-access-policy/1300
Anti car theft could be good. Just send the position every 5 min or so? When there is lora signal it should me enough. But it's something else then gps tracking you did in this video.
Thanks, inspiring post. I used this for my own, modified project.
My pleasur Wim, do you share your project somewhere online?
Not yet
Today I posted an Instructable of my project. In the intro I added a link to this video. www.instructables.com/id/GPS-Logger-Arduino-OLed-SD/
The green light is not blinking so what can I do?
You have not a gps fix. Do it at the window or outside house.
i used ublox NEO-M8N-0-10...
it not work :(
i need your help..thanks
Bro you really need the gy-neo6mv2, functions used are specific to this module. www.bitsandparts.eu/documentation/151/TinyGPSPlus.zip you can see full examples of the code here, hope this helps dude.
how to download libraries for this gps module
give me the link for libraries
www.bitsandparts.eu/documentation/151/TinyGPSPlus.zip I think this is it, inside the zip file are also folders to example code blocks. Sorry for the late response mate :D
Notice that the baud rate might need to be adjusted to get a good serial connection.
can this work in area whre no internet n mobile network are found
Sure you collect your data without any connection. Afterwards you put them in google maps.
hello i made it and work very well .thanks very mach
Lekker man
Sir can you combine it into the gsm modul? Please
yes
Dank voor de video
I can use this Gps module with mi RPI 3? i'll use in my carPc. tHANK'S!
Yes this works for rasberian as well
thanks! And I would like to do another question: This Gps module is better than Gps mobile phones?
you probely can filter more data with this one. but most gps in smartphones are good.
can you please give the code for using neo 6m gps module with raspberry pi 3 running raspbian jessie
Thanks teacher !Can you please give the code for using neo 6m gps module with raspberry pi 3 running raspbian ?
Which arduino is this???
Its an arduino uno with GY-NEO gps and a sd shield
Great video! thanks for sharing!
Can i use arduino nano
Yes, that will work as well, have that one set up in my car, works the same as a regular arduino!
@@marijndegen ok thank you
Nice video there , Can it be possible for you to make another video on how to send the GPS data to a sever real time?
very useful, thx bro
Great - thank you!
Led of my gps is not blinking
Hello, have u found the solution? Im currently encountering this problem
@@madnoajiq6958 unfortunately bro I haven't. That time I decided to redesign my project and excluded my gps coz its not working
battery? are you serious? this is super capacitor
Cool thanks
Bro just revealed his location
Right 7 years ago🙂
hoi dit is echt goed :)
thank you ((;
GY-NEO6MV2