How to Install Bed Rail Hardware
HTML-код
- Опубликовано: 2 июн 2024
- To start comparing quotes and simplify insurance buying, check out Policygenius: policygenius.com/3x3. Thanks to Policygenius for sponsoring this video!
Huge thanks to Woodcraft for sponsoring this video, you can find everything you need to build a bed here -
(Keep scrolling for individual links to items I used in this video)
For more details, check out my website - www.3x3custom.com/
We are back in production for the 6-in-1 Router Jig! Should be a few weeks until we start the pre-sale... sign up to be notified when we have them back in stock here - www.3x3custom.com/store/6-in-...
____
WOODCRAFT LINKS
Bed Rail Fasteners:
bit.ly/BedRailFastener
Center Finding Ruler:
bit.ly/12inchCenterFindingRule
1/2" Cutting Length Pattern Bit:
bit.ly/HalfInchCLPatternBit
Double-Sided Tape:
bit.ly/BestDoubleSidedTapeEver
DeWalt Trim Router:
bit.ly/DeWaltCompactRouter
Straight Drill Guide:
bit.ly/DrillBlock
Flush Cutting Saw:
bit.ly/KugihkiSaw
Self-Centering Hinge Bits:
bit.ly/VixBits
Tablesaw:
bit.ly/Sawstop1
Chisels:
bit.ly/WoodriverChisels
AMAZON (affiliate) LINKS
Push Stick:
amzn.to/3hOrESf
Dust Port for DeWalt Router:
amzn.to/3THI2B9
3/16" Spiral Bit:
amzn.to/3gd7ilc
____
My Amazon Store - amzn.to/2uRpplb
_____
My Recording Equipment
Camera:
amzn.to/3r3HAC0
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :)
00:00 Introduction
00:10 Making the Template
02:31 Router Bits and Other Tips
04:04 Cutting Main Mortise on Headboard/Footboard
04:44 Policygenius
06:17 Cutting Main Mortise on Side Rails
09:05 Cutting Inner Mortises for Hooks on Headboard/Footboard
12:36 Making Clearance for Bumps on Side Rails
13:21 End Grain Problem Solved!
14:03 Screwing in Hardware
14:45 Test Fit #1
15:21 Quick Overview of all Steps
15:46 Test Fit #2
16:58 Outro - Хобби
To start comparing quotes and simplify insurance buying, check out Policygenius: policygenius.com/3x3. Thanks to Policygenius for sponsoring this video!
Thanks for this Tamar. It's one of those things that my wife would say, "Why is it taking you so long to nail in some brackets!" You have demonstrated how getting things right and repeatable takes thought, preparation and practice.
Hahaha! Patience is key too 👍
I've told my mother this and so has my stepdad. Now if only she'd get it.
You are a natural-born teacher/instructor/mentor. There are so many different levels of help, from ways of approaching problem solving with jigs to adding extra space for the hardware when you use your router. I continue to learn so much more from you than what is mentioned on your RUclips titles. Thank you!
That’s really awesome to hear ☺️
I've been agonizing over this install the past few days, especially cutting the mortises into the rails on the end grain. After failing with chisels and a router plane, I resigned myself to the router, which is the tool I'm least confident with. Your process for building the jig, accounting for the recess for the hooks, etc. make this feel so much more accessible. It really is confidence inspiring. Thank you for the detail and for sharing your expertise. Now my boy is finally going to get his 'big boy bed'!
Awesome. Just practice on a piece of scrap and you’ll be fine!
Another example of why your videos are at the top level of the best RUclips videos out there. Not just an instructional vid about how to do something, but all the little tips and tricks for how to get things right. There are very very few content creators today who can match your instructional expertise. I really can't emphasize that enough! From leaving the template on while chiseling out the corners, to how to transfer the lines into the template opening, to showing why you need to mortise the hardware a little deeper than flush so you get the required fit.
There are a LOT of RUclips creators (some very popular ones) who should watch your videos to see how it's done. You are a born teacher.
Really so awesome to hear. ☺️☺️
Really nice approach to the mythical “teaching moment.”
All these jigs and tricks (the dowel on end grain) that you come up with. It's like your brain is wired differently than mine. I just can't see myself coming up with these things. Thank God for RUclips and channels like yours.
Haha. I originally thought I would route out a larger area and glue in a block with the grain oriented in the correct direction. But that didn’t seem easy enough… so I kept thinking… 😂 You can also glue 3 dowels on the inside face of the piece in line with the screws. But that requires more measuring and laying them out correctly.
I swear you're one of the only makers left that actually make and don't just push products and their channel. Thankyou
👍👍👍
The dowel so as not to screw components bearing heavy loads over long distances was genius. I'm very appreciative to have learned so much from you and other YTers. Truly a wealth of knowledge that would be nearly impossible to come by through practice alone. Thanks for another great vid!
Quick follow up question though, just in case you see this, if there was the 1/32 gap in hardware, how come BOTH sides needed to be adjusted slightly deeper? Clearly it worked, and that shows the necessity of practice first, but I would have expected you to only drop the depth on the 'female' mating side. Am I missing smthn? Knowledge is always appreciated but I'm also shocked you ever find time to even read these comments!
I admire the fact that you have all your fingers, that no portions are missing, and nor are there any visible scars on your hands or arms. Plus, your videos are extremely informative with just about the right amount of detail. Although it escapes me how you have time to breathe while explaining things.
This is incredibly well thought out. I appreciate you taking the time to show us rookies some of the smaller details.
Glad you appreciate it!
Couldn't agree more with you @Tim
Tamar, its great to see you in your new shop...without a winter coat on even! Thanks for Sharing!
So happy I don’t have to wear a winter coat anymore!
This time of year i used to compare who’s shop seems to be the coldest…you almost always won. But now that you have your new shop, I think the Igloo Award will come my way 🥶. Love your videos, keep ‘em coming!
Very glad to not be the recipient of that award this year.
Great explaining the difference in just the smallest amount of extra wood vs i little bit of less.... Well done Tamar
I've decided why I love her videos so much, it's her voice! Her words are so well assembled intelligent wise and well I don't know exactly why but I LOVE listening to her.
Great tutorial as usual. You do so much to educate woodworkers like me, I kind of feel guilty watching your vids for free. If you ever do a Patreon set up, be sure to let us know. Thanks for posting and thumbs up!
Haha! That’s what the ads are for 😉
only 11 seconds in and I know it's gonna be another great Tamar video. "First thing you need to do is make a jig..." You are so great at sharing your thought process. Thanks!
Haha! Jigs are the answer to everything 😂
Using your mom super powers to think ahead about the fitted sheets!! Great idea and another awesome build. Thanks for sharing!
☺️☺️
Your videos make me feel like I can make anything and that I should make myself my king's size bed but my lack of tools and work bench say otherwise.
One of my first projects was a bed! You can do it!
That dowel trick on the under-side is pure gold. Love your videos!
Glad you like them!
Thanks, Tamar. I'm making a bed for my 2nd granddaughter, so haven't done this since the last one reached 2 yrs old and needed a bed. Good tip on making the mortises deeper than the thickness of the hardware!
You are so welcome! Must be nice to build for the grandkids ☺️
Simply... "Outstanding instructions and presentation!"
Thank you for a unique video explaining this process with lots of helpful detail. It shows the extraordinary time and care a woodworker often invests in exacting tasks. So many RUclips videos show people just breezing through their projects--but this is not reality! I just finished my first bed project, and had trouble getting the depth of the rail hardware mortises just right with a router and jig. I gave up and did final adjustments with a router plane and hand chisel. Congrats on your beautiful bed and thanks again Tamar--you are a wonderful teacher!
I have such mixed feelings about editing everything down… on the one hand, turning a 2 week project into 20 minutes inspires people to try it themselves. On the other hand, people get discouraged when they think it’s taking them longer than it “should”. So I try my best to include as many obstacles as I can so that latter doesn’t happen…
Hi Tamar,
This was interesting to watch since I made the beds (just like a maid!) for Amana Furniture Shop for twenty years. Our design used a 1-3/8" by 2-5/8" by 7-1/2" mortised block and a 3/4" by 7-1/2" tenoned rail. Beds were made usually one at a time with end blocks made in small runs. I found the fastest and most accurate way of letting in the hardware (just like you used) was to do most of the cuts on an overall pin router and finishing up with a hand chisel and a small router plane. A tapered drill bit was used for the screws.
Thanks for the video!
I so much miss you in your old shop and cranking out videos. Making jigs, using less quality power tools, etc. More content please! Thanks
I don’t. I’m enjoying my time with my family.
I always appreciate how thorough your tutorials are!
Awesome to hear
Thanks for the full dive on this process. An adjustable jig for the hardware would be a nice upgrade.
Glad you liked it. Double sided tape makes it adjustable enough ☺️
That trick at 13:50 was very nice. Thanks.
Clearly explain step 🪜 by step 🪜 instruction no loud 🔊 music and noise in the background 💡🔥💯😎
Glad you appreciate it!
Great video! Great how you show the importance of the depth! At 14:50 I would have been cursing like a sailor :)
Haha. That’s why we practice on scrap!
Thanks Tamar, I am collecting parts to build my first project, one of which is a bed. I saw these brackets in the store and could not ligure out how something so loose and wobbly could hold a bed together. Now it makes perfect sense. I love your videos and the jigs you build are great. I've purchased several of you kits and many other recommended products. Keep going. You're not only informative but fun to watch.
Because I am not there watching I can’t tell if you are a genius woodworker, or you just make every possible mistake and then you share with us. Out of the 400 plus woodworking channels I subscribe to as far as thoroughness goes your at the top of the list. And from what I have seen you are also the jig queen. Happy Holidays
Haha. I just learn by making mistakes and then I share everything as I go 🤷🏻♀️😂
I’m just waiting to get that special email so I can get your 6-in-1 base plate. I’ve literally checked the website everyday!
Very helpful. Thank you for the thorough instructions 😊
You're back!!! So happy to see another video!😀
More to come!
Great tutorial on installing the bed hardware Tamar! Thanks for taking the time to show the steps and explain the reasoning behind installing the pieces below flush. You do such an excellent job in all your video's. Would love to see you have your own TV show about woodworking on PBS or a DIY channel. Happy Thanksgiving to you and your family. Best wishes for a wonderful holiday season!
Thank you for showing us this. Also, can't wait for the jig to show up.
You are such a terrific person and wonderful instructor. Thank you for all of the work you put into your channel!
Your process descriptions are fantastic. Thank you 🙏
Glad you like it!
Great video Tamar as always. You are the best woodworker-woman! Thank you for your hard work to educate us!❤
Some 40 years ago I tackled a bed as my first major woodworking project. I used this type of hardware and discovered each of the obstacles you describe one by one. Later, the bed fell apart because of the screwing into endgrain problem you explained so well. I repaired it using threaded inserts with bolts instead of screws. I still sleep on the bed every night and it's still rock solid. Thanks for a really great explanation of how I should have done that job as well as a trip down memory lane.
Mistakes are a great way to learn! As long as no one get hurt… ha
Amazing work and a brilliant tip of adding the dowel to strengthen the grip of the end grain screws!
Glad you like it!
I just finished installing 3 sets of these on a project (not a bed but the same hardware) and your information is spot on. After doing several test cuts I got the same rock solid fit you described. Nice job.
Happy new year😊
Tamar, so glad to see you posting videos again - we have missed you while you were moving. This is a really good video for explaining the why's and how's of using project specific hardware. such a simple solution to what could be a major problem during the final install of the bed. Thanks for showing the wrong way before showing the right way - that visual really drives home the point you were making.
Looking forward to more of your projects.
Glad you appreciate it! When I first started using this hardware it was surprising to me that I had to route deeper so figured that was key info ppl would like as well.
Just getting ready to build my first bed frame. Perfect timing...Thank You so much. Bill.
Awesome. Good luck!
Great project! Thanks for sharing with the community!
Thanks for watching!
Excellent video. Honestly, you have provided some of the best instructional videos I have ever seen.
Thank you for all your great videos. Have a joy filled holidays. This guy makes incredible jigs just like you do. A little gift for you.
👍👍
We.miss...you.
Happy new year 💐
Merry Christmas Tamar!
Excellent tip. I would not have thought of driving the dowel up in for strength.
Tamar, thank you for all the tips within this video! Especially the dovel to avoid screwing into end-grain.
Glad you liked it!
Happy New Year
Thank you for all your videos. They are informative and have great tips for a beginner. Keep up the fabulous work. 😊
Glad you like them!
I really like your collection of tools! Most of my tools are old and now I'm thinking I'd like to modernize and upgrade. It must have taken you a long time to get such an awesome collection of tools.
Thank you! I needed this. I will make a bed for myself and this is the best way to do it.
Good luck! I love this hardware
Tamar this is awesome. Thanks. Explaining the tiny details makes a lot of difference from knowing how to do it and knowing how to perfectly do it.
Glad you liked it!
Lots more to this than I thought- thank you for this excellent video.
Glad you liked it!
They must make a table apron attachment like this too, you could literally still things flat packed. You could sell a base kit that works with hardwood tops from Home Depot to save on shipping.
Finally you arrive, thanks for sharing, great idea 💡👍🤠💯
Glad you like it!
Another excellent instructional video!! Thanks for the detailed instructions and wishing you continued success.
Glad you liked it!
I've used these same hardware sets on all the beds I've built over the years. Tamar is dead on correct with these. Never had one fail. And, to be honest, never had the screws going into end grain be a problem either. I do like your solution for that possibility though (the dowel). I have also accidentally made the mortises a hair too deep before, and just used some sliced up business cards as shims under the hardware to resolve that. And again, with zero issues in the long run.
Awesome info Tamar!!!! 😊
Great video. Shows how it can take a goods bit of time to do a “simple” task. Takes additional time to install the dowels so the screws can properly connect through end grain. And I like how you care about your camera, making sure it was ok. LOL
Such a great video! Exactly what I was hoping to see. Thanks!
Glad it was helpful!
Impressive how you get the best splicing with this this little big tip. Thanks for this great information 🙂
Glad you found it informative!
Thanks for sharing those tips and the make!
Glad you liked it!
Thanks very much. Fantastic tutorial as usual. The dowels are a top level pro idea. First time I've ever seen them to be honest.
Glad you liked it. It’s an old trick…
I have never tried this, but was told to make the one inset the same depth as the two pieces put together. Thanks for making this video. It’s great.
I think that would be too deep… glad it was helpful!
Great video! I just talked about your juice groove jig in my latest video. No I need to make it lol. Thanks for your content!
Excellent presentation
Thanks. Glad you think so
Hello!
I just found your channel and I really liked it, you explain everything and you make it look easy!
Thank you for sharing your knowledge!
I will subscribe right away!!
👍
You are so welcome!
Freaking love your set-up. What a beautiful upgrade. Go Tamar!
Thanks!!
That's awesome. Thanks for making this video.
Glad you liked it!
This style of hardware is so much more work but worth it in my opinion and sooooo satisfying when you get the fit right.
Yes! Super strong! Worth it for sure
This was so helpful. Thank you
Glad it was helpful!
Another example of good use of jigs. A few years back I was rebuilding an antique (short) bed in Italy. I used similar hardware that I brought over from Lee Valley. When I opened the package I saw that the hardware came from Italy, but I have never been able to source it there!
Woodcraft for the win!
great information and very well explained
Glad you think so
Excellent! Thanks.
Hi Tamar,
Your tip with the dowel is great, I would never have thought of it. Ultimately, this is a simple but strong solution.
Thank you for sharing this with us.
Willy from Belgium.
It’s an old trick. It’s not anything new. I think I saw it years ago in a chair design… it’s interesting what you learn when you stick your head under pieces of furniture 😂
@@3x3CustomTamar Thanks again, Willy.
Muchas gracias Tamar, un tutorial bien explicado para colocar los herrajes para una cama para que queden ajustados. Saludos desde Medellín, Colombia.
Very well done video! Stumbled on the 4-piece mortise jig in mdf. Takes glue very well. (Mine was for furnace floor vents - larger - and I used biscuits.) Your observations about considering bit length 👍. (I have a few unused bits as a result of too long.). The one thing I also “discovered” is that in routing a mortise on a large flat surface (like a floor), you can pop off the jig and use the mortise with the top-bearing bit to go deeper. (A real “duh” moment.)
Haha yup! Always stuff you learn as you go
Tamar, you are very astute when thinking about templates... the shape that you solved with two cuts of the table saw, which would have taken more time to do perforation, very clever
Glad you liked it!
Thanks. A bunch of technique that can be used in other applications.
Yeah! Totally!
Very sneaky sponsor ad. I appreciate you accommodating my at short attention span. ✌️🤟
Haha 🤘
Thanks for this video it helped out a lot.
Glad to hear it!
Gracias Gracias, saludos desde Argentina
Nice job Lady 👍
👍
Perfect
Perfect
Perfect
Y have solutions for everything
Thank you so much
So glad you liked it!
@@3x3CustomTamar thank you so much. I am very happy when you reply, because I know there are a lot of comments
Great video, thanks you so much for sharing. It will be very usefull for me
Glad it was helpful!
I just bought a new plunge router but still haven't used it. Great video as always. Thank you.👍👍
Ooh. Have fun with it!
Hi Tamar!! Its great!!!
Great video as always Tamar 🙂. Woodcraft should be linking your video on their bed bracket page. There are a couple of points that I discovered when using similar brackets - I got the 4" ones from Rockler.
1. The bed rails should be 1"+ thick. If you use the 3/4" boards commonly found at home centers *e.g. 1x6), you're left with only 1/16" on either side. I had always planned for 1"-1 1/6" for sufficient strength, but read this complaint in the review/comments section of the product page.
2. Since it's the mortise that gives the bracket strength and not the screws, I think it's better to offset the location of the bracket on the rail towards the bottom, leaving more meat at the top. In your case your bracket was about as long as your rail so couldn't have offset much.
I chopped my mortises with a chisel, and had this ridiculous setup where I clamped the rail vertically in my vise, and stood on a ladder to chop. :-D
Haha I considered standing on a ladder with a router… decided there was a better way 😂
Nicely done Tamar.👌
The deeper inlay of the receiver plate is an often miscalculated ordeal for many and the installation directions are usually terrible. 🙄😂🤣🤪
The end grain dowel is always a great tip.👍
One detail to add is when inserting the dowel, make sure the grain is crossing the thickness of the board. Some dowels are straight sawn and the grain goes right through the center.
I noticed your dowel grain was angled diagonally which solves that issue either way.
You look so happy working in your new warm space.🤙
Ha! I wish mine came with any installation directions. 😂
@@3x3CustomTamar I was going to mention that, but I figured you would.😂🤣😂🤣😂🤪
13:28 the dowel is an improvement, but in that situation I'd go for IKEA's solution of using a machine screw going into a threaded steel plug nut.
This is awesome!! I never would've thought about gluing a dowel in for those screws. Thank you so much for sharing! How the new shop? haha.
WOw. I just went through college. I need my Diploma Prof!
😂😂
ذكاء وإحترافية في غاية الجمال
Amazing demonstration, you truly are a natural. Regarding the hardware, it seems like a design defect to put it that close. I realize it will still be strong, but it really makes for some very tight tolerances when installing. It would have been much better to just move the slot and hook up 1/16 or an inch or so to allow more clearance.
It’s weird bc there are many brands and they all make them exactly like this