You can use the radius to the outside diameter... for example OD is 200 radius is 100 obviously.. you need your PCD to be on 80 so you just need to substact 20 of the OD.. I'm presuming you are talking about parts being made on a lathe etc..
Where did the 160 come from. It can't just appear How do you find pcd on a blank space with a Dia of 200 and inner 100 and hole Dia 3 and number of holes 6. How can you tell how far away from the outer diameter to place the 1st hole?
MechTechStation yeah..that is what i m asking..if R is not given then it is not poosible to calculate H.. You can not decide the position of PCD or holes arbitrary. am I correct and clear.?
Video is good but music is too disturbing and irrelevant. Can you please advise how to calculate distance between corner to corner of two adjacent nuts on the PCD???
If you want to calculate the distance bet. Corners of a nut then its always 2D, here D is diameter of bolt, this you can simply see from any mechanical engg. drawing book, all calculations for nut, bolt and rivets is given.
While the information was very good and I'm sure informative, I was not able to follow along. No disrespect but that music or noise whatever it was, was far too distracting for me, just an FYI. I would love to hear you talk through everything and explain. Makes for a much more valuable archive in my opinion
Joe West I m glad to hear you, i ll try to have another video with my voice. And And if you have any topic, pls let me know, i ll gather out info and research and will make video for that. keep learning.
If you remember me please send me a link if you ever make that video I'm new to Machining I'm trying to duplicate an adapter plate on my leg to fit a 4 jaw Chuck I also have a small Mill in a rotary cable but I'm not about to use transfer punches to figure out where are these both holes are supposed to go to match the existing adapter I just don't know enough to know the proper way to do it thank you
mahesh gaikwad lets take same pcd.. =160mm no of holes =3 H = sin@ x PCD @ = angle btw two / 2 @ = 120*/2 = 60* so, H = sin60* x 160 = 0.8660 x 160 =138.56 mm
Super Vedio Sir
Excuse me, do you have any method to find how many holes a steel plate should carry?
Yes u r a genius
Thanks.
How to find the chordal distance? With 6 total number of holes and BCD is 4?
Pipe ko 90 degree main bend banane ke liye Kitni Marking karna Padege kya aap bata sakte ho
I can explain, but before, give me detail about pipe, or Pipe drawing.
Super
Super thank you sir
Awesome Thanks.
Thanx
how do you find the PCD when you don't have a center-point to go off from?
You can use the radius to the outside diameter... for example OD is 200 radius is 100 obviously.. you need your PCD to be on 80 so you just need to substact 20 of the OD..
I'm presuming you are talking about parts being made on a lathe etc..
Where did the 160 come from. It can't just appear
How do you find pcd on a blank space with a Dia of 200 and inner 100 and hole Dia 3 and number of holes 6.
How can you tell how far away from the outer diameter to place the 1st hole?
what exactly are flange rolls? For classification for Customs purposes only
for connecting two hose pipe., mostly water pipe,
a sealing made of rubber is also putted in between flanges for preveting from.leakage.
Excellent sir nice video
how to know the pcd without knowing the value of R.?
Only no of hole is given and nothing else,
Because... PCD lies within ths Holes.
MechTechStation yeah..that is what i m asking..if R is not given then it is not poosible to calculate H..
You can not decide the position of PCD or holes arbitrary.
am I correct and clear.?
see in the formula PCD= H* sin/n. where n is the no. of holes here, H & PCD both are unknown which is not possible to get from single equation.
Dear sir,... because H is related,
You can see here... for PCD
ruclips.net/video/gRp22_Rn0Vo/видео.html
@@RajanKumar-xc8pm exactly what I was wondering. Where did the 160mm come from.
Great
please share the p.c.d calculation excel file
No puedo sacarlo con la calculadora construction master pro model 4065 ayuda..
Can I make a 12 hole at 30 degree angle with centre to expand more heat to surrounding
very nice...
excellent
it helped me a lot
THANK YOU , I LOVED TO SHARE.
GIVE ME SOME SUGGESTION FOR MORE INTERESTING TOPIC OR MAKING VIDEOS.
John Perez drive.google.com/file/d/0B4eRrlxX1yTSNWRkWUIxZDNQX1k/view?usp=drivesdk
John Perez ruclips.net/video/gRp22_Rn0Vo/видео.html
Thank you sir
can u please tell the following
if the outer dia is 100mm
inner is 50mm
hole dia 10mm
number of holes 4
how can i find the PCD?
yes, i m making a video on that. sorry for late replying.
Ammad Anis ruclips.net/video/gRp22_Rn0Vo/видео.html
Ammad Anis ruclips.net/video/gRp22_Rn0Vo/видео.html
Video is good but music is too disturbing and irrelevant. Can you please advise how to calculate distance between corner to corner of two adjacent nuts on the PCD???
If you want to calculate the distance bet. Corners of a nut then its always 2D, here D is diameter of bolt, this you can simply see from any mechanical engg. drawing book, all calculations for nut, bolt and rivets is given.
50mm diameter me 3hol kese kre
50÷3
Make a video how to find a tapper angel and distance
Right angle triangle?
Or just look up the chord length in the Machinery's Handbook chart...
Very Nice
It's not a Excel file link, it's a apk link?
i ll give you... drop your email
خیلی خوب
Excel formula me distance between hole not working
How you are finding the pcd. I want to know the pcd.
JUST WAIT TWO DAYS, IN MY NEXT VIDEO...I AM ABOUT TO ADD THAT CONTENT THERE,
i ll share the " Rule " and all the info in my next videos, just this in two days
ruclips.net/video/gRp22_Rn0Vo/видео.html
xzcabhishek drive.google.com/file/d/0B4eRrlxX1yTSNWRkWUIxZDNQX1k/view?usp=drivesdk
xzcabhishek ruclips.net/video/gRp22_Rn0Vo/видео.html
To anyone that is thinking about downloading the link DONT because you will get a calendar virus on your phone so do not do it !!!!!!!
really? i will fix it, i dont want to give any touble.
While the information was very good and I'm sure informative, I was not able to follow along. No disrespect but that music or noise whatever it was, was far too distracting for me, just an FYI. I would love to hear you talk through everything and explain. Makes for a much more valuable archive in my opinion
Joe West
I m glad to hear you, i ll try to have another video with my voice. And
And if you have any topic, pls let me know, i ll gather out info and research and will make video for that.
keep learning.
If you remember me please send me a link if you ever make that video I'm new to Machining I'm trying to duplicate an adapter plate on my leg to fit a 4 jaw Chuck I also have a small Mill in a rotary cable but I'm not about to use transfer punches to figure out where are these both holes are supposed to go to match the existing adapter I just don't know enough to know the proper way to do it thank you
Thank you very much 😀
Hindi me bnaoge to jyada view milega, aur jisko English nhi aata usko bhut gussa asta h, jaise mere ko,
good video i do work in tool room its help me sir i want to same method for three bolt circle plz upload video for that
mahesh gaikwad
lets take same pcd.. =160mm
no of holes =3
H = sin@ x PCD
@ = angle btw two / 2
@ = 120*/2 = 60*
so, H = sin60* x 160
= 0.8660 x 160 =138.56 mm
mahesh gaikwad
download the excel sheet from there you can calculate your valus just putting the pcd and no of holes. simple
mahesh gaikwad drive.google.com/file/d/0B4eRrlxX1yTSNWRkWUIxZDNQX1k/view?usp=drivesdk
mahesh gaikwad ruclips.net/video/gRp22_Rn0Vo/видео.html
thank you sir
Annoying background score
Pagal background music ky diya
great but didnt enjoy the music though
Annoying music