No, Pioneer DEH-S5250BT does not work with parking sensors. I recommend the Pioneer SPH-C10BT. You can learn more about it here: ruclips.net/video/_ISxPmindi4/видео.html You can find more information on Pioneer's web site here: SPH-C10BT - Pioneer You can find more videos on Pioneer's RUclips Channel here: pioneerelectronics - RUclips
Hello. Just bought the SPH -10BT. I maybe confused or didn’t do something correctly, but my phone doesn’t come out 3 sections on my phone like on the video. My radio does have the latest update. Could be my phone? What it is that I’m doing wrong?
Is it possible to play music through USB without connecting smart phone ( only plugging USB drive). Bcoz sometimes it happen that battery is very low or dont want to connect smart phone.
Yes, it's possible, though without using the phone, it's more difficult to navigate folders and songs. You can find more How To videos about Pioneer SPH-10BT in this Pioneer You Tube playlist: ruclips.net/video/N6Lfcnjyboo/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
Here is a How To video from Pioneer showing phone cradle operation: ruclips.net/video/2X0_WyTEMp0/видео.html Please be sure to have the latest firmware installed on your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Are you saying there is a low pass filter built into The receiver for the rear speaker channels? So i could in theory connect small subwoofer speakers directly to the headunit without a power amplifier?
Yes. That's correct. Nearly every modern Pioneer in-dash receiver, SPH-10BT included, is capable of operating a small subwoofer on the in-dash receiver's rear channel. Don't expect to pound nails through concrete with this small subwoofer. It won't. However if you want to operate a 4 ohm or one 2 ohm, 8 inch subwoofer from the rear channel it will work well. You can find the installation manual for Pioneer SPH-10BT here: www.pioneerelectronics.com/StaticFiles/Manuals/Car/SPH-10BT_InstallationManual021919.pdf Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more How To videos about Pioneer SPH-10BT here: ruclips.net/video/-bF3uzzaT30/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
It it only Rear left speakers thats play 4ohm subwoofer on sub/sub setting. Or is the right speakers also playing sub or fullrange? The instruction manual is not very clear on this
If you want to run a subwoofer in your vehicle, for best performance, I recommend to use a self powered subwoofer, or a subwoofer paired with an external amplifier. Pioneer offers many to choose from including the TS-WX1210AH seen here: ruclips.net/video/cI9SfaPFenA/видео.html or the GM-D8701 seen here: ruclips.net/video/-Uq25Goo0sU/видео.html paired with the TS-A3002d4 seen here: ruclips.net/video/AfxYsYFnzes/видео.html It is possible to run a small subwoofer directly from the rear speaker outputs on the in-dash receiver. However, I recommend no larger than 8 inch subwoofer seen here: ruclips.net/video/WkbRBGtW9yM/видео.html If you try to use a larger than an 8 inch sub you may be disappointed with the performance simply because the in-dash receiver's internal amplifier does not have enough power output to effectively operate a large subwoofer. In the initial Speaker/PO setup you can choose the Sub/Sub option. If this case you can run a 4 ohm subwoofer on either the rear right or rear left channel with no issues. You can run one 4 ohm subwoofer on the right and one 4 ohm subwoofer on the left at the same time. No problem. Please don't expect huge output. You won't get it. This changes when using 2 ohms. It's also possible to run 1 subwoofer wired at 2 ohms ( or 2 subwoofers each with 4 ohm impedance wired in parallel representing a 2 ohm circuit ) on the right rear channel, and leave nothing connected to the rear left channel Simply terminate the left rear channel properly so no wires or metal come into contact with the bare wires. This is explained in the installation manual on page 3, numbers 18 and 19. You can download the installation manual here: www.pioneerelectronics.com/StaticFiles/Manuals/Car/SPH-10BT_InstallationManual021919.pdf You can learn more about wiring your Pioneer in-dash receiver in this How To video from Pioneer: ruclips.net/video/-bF3uzzaT30/видео.html You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
@@pioneerelectronics Thank you very much 🙂 I just want to run two small 5.2 inches bass not a real sub. i want them to play only low sub output It was not clear to me if both could play bass but they Can and thats great.👍🏻
As of 2020 February the Pioneer SPH-10BT does not support a back up camera. It does work with rear parking sensors seen here: ruclips.net/video/_ISxPmindi4/видео.html You can find a Pioneer Playlist of videos about SPH-10BT here: ruclips.net/video/wgvHfVus7Xw/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
Hi. I'm using the R/SW RCA outputs for an amplified underseat subwoofer and L RCA outputs for an other amplifier for front speakers. The Full/Sub is the correct setting or an other? Thanks
To clarify, please be more specific with your question. I think you have it correct, but maybe made a typo in your question with "L RCA outputs" ? For a setup with front speakers and a subwoofer, I recommend to use the receiver's FRONT RCA outputs both Right and Left to send signal to the amplifier operating the front speakers. Additionally, I recommend to use the in-dash receiver's Rear/SW RCA outputs, both Right and Left to operate the under seat subwoofer. In the receiver's SP/PO setup menu , I recommend to use the Ful/SUB setting. This will give you a subwoofer control from the in-dash receiver. You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Please note: The Pioneer SPH-10BT is designed from the ground up to operate with a smart phone used as a remote control to operate the receiver. While it is possible to operate some functions of the AM/FM Tuner and USB music playback, without a smartphone connected for control, it becomes difficult to use without a phone. I strongly recommend to use the Pioneer SPH-10BT with a smartphone to control the receiver. If you are considering buying a new in-dash receiver, but don't always have a smartphone with your, a more traditional in-dash receiver may be a better choice for your particular application. Please consider the Pioneer MVH-S720BHS seen here: ruclips.net/video/FBck5BfCnXE/видео.html You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
The Pioneer SPH-C19BT is designed to be operated by using the Pioneer Smart Sync App on your iPhone or Android based phone. Please be sure to install the latest firmware for our Pioneer SPH-C19BT. You can find it here: pioneer-india.in/buy/car-entertainment-car-stereos-usb-players/sph-c19bt/ Here is a video explaining FM/AM tuner operation when using the Pioneer Smart Sync App and a similar receiver: ruclips.net/video/wuV0LIVxFes/видео.html You can find a full playlist of How To videos from Pioneer about SPH-10BT here: ruclips.net/video/vjeZ34q0nvA/видео.html and you can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
I recommend using the Initial Setting SP-PO Mode "REAR/SUB.W" This makes the rear RCA outputs Subwoofer Outputs and it keeps the Rear Speaker level outputs as full range speaker outputs. Use the Rear RCA outputs from the in-dash receiver to send the signal to the subwoofer under the seat. You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Hi I have hooked it up to my steering wheel control, but the buttons doesn't do the correct thing, there are 3 buttons that changes mode, and the volume button on my steering wheel doesn't do anything. it does beep tho, everytime i presss it. Is there a way to remap the buttons? thanks
There are no settings to change the commands of the steering wheel controls on the Pioneer SPH-10BT. In most applications, mapping steering wheel controls is done when you program the 3rd party steering wheel control adapter to work with your particular vehicle. I recommend to contact the steering wheel control adapter manufacturer for more information about mapping buttons to the receiver. You can find a full playlist of How To videos from Pioneer about SPH-10BT here: ruclips.net/video/wgvHfVus7Xw/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Please check the Fader and Balance control on the Pioneer DEH-S1000UB. You can see it here: ruclips.net/video/XXOWoQLwyag/видео.html The Balance control is for Right to Left. The Fader control is for Front to Rear. I recommend Fader control set to 0 and Balance Control set to 0. If this does not correct the issue please check the wiring from the in-dash receiver to the speakers. You can find more information about wiring your Pioneer DEH-S1000UB here: ruclips.net/video/kR2MO2kwFug/видео.html You can find more videos about Pioneer DEH-S1000UB in this Pioneer Playlist: ruclips.net/video/YNniqyTm-TE/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
Deckard! I have a coup!e of questions on the parking sensors and the sph-bt10 in general: Can I really not paint the sensors? I'm not really happy about having 4 black circles on my iron grey metallic rear bumper. I see there are loads of painted sensors available on eBay with various paint finishes. Is it really going to affect the sensors that much with a couple of layers of primer and paint? What happens if one of the sensors fails? Can I replace the sensor with another after market item? The sensors that Pioneer provides, seem to use a common 2 pin connector that every other sensor uses. Do you know if these would work? I notice the Pioneer Smart sync app recently had an update in Feb 2021. Am I right in thinking that it now can use Google assistant and Siri and not just Alexa as was previously only possible? I'm a bit worried about this 'purple/white' wire that needs connecting that isn't mentioned in the manual that comes for the Pioneer dear parking sensors. Apparently, without this connection, the Sph-10bt will not work properly with the sensors. Will this purple/white wire be long enough to reach from the receiver to the back of my saloon vehicle's reversing brake wires in order to make the connection, or will I have to solder on another wire to extend the length? Do you think an amendment needs to be made to the manual, to mention this previously, undisclosed information about the purple/white wire maybe? I only heard about this from searching on the internet and finding out from others who had this issue. Lastly, do you know what other features we have in store for the smartsync app and the Sph-10bt in general? Thanks!👍
You can apply what we call a “skim coat“ to the sensors. These are aluminum sensors, as all ultrasonic parking sensors are. A skim coat simply means a very thin coat which will approximate the color of your bumper. You can also sand off the color that they come with and just have raw aluminum sensors. I do that for certain vehicles.
As of 2019 September, no camera option is available for the Pioneer SPH-10BT. Parking sensors are available with the Pioneer ND-PS1. You can see it here: ruclips.net/video/_ISxPmindi4/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more How To videos about Pioneer SPH-10BT in this Pioneer You Tube Playlist: ruclips.net/video/N6Lfcnjyboo/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
Yes, you can use a wireless remote control with the Pioneer SPH-10BT. I recommend Pioneer part QXE1044. Pioneer's Authorized Parts Distributor in the US is PACParts. You can find them here: www.pacparts.com/part.cfm?part_no=QXE1044&mfg=Pioneer Of course using the Pioneer Smart Sync App on your phone to control the SPH-10BT receiver is an important part of the system. You can see it here: ruclips.net/video/pmu5ClsfWgk/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
How to save the audio setting? Is that autosave if I turn off the power? Because, my sph10bt is auto reset if I turn off the power and car. FYI I didn't use the sync app, I just make an audio setting on the head unit.
If the system resets each time your turn off the car, you may have the in-dash receiver wired incorrectly. Please focus on the Red Wire and the Yellow Wire. Do Not connect red and yellow together. Red is for ignition. Yellow is for constant power for memory functions like radio station presets and audio settings. You can learn more about wiring your Pioneer in-dash receiver here: ruclips.net/video/-bF3uzzaT30/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos about Pioneer SPH-10BT here: ruclips.net/video/wgvHfVus7Xw/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
@@deckerdotto6035 I exchanged red and yellow wires. The audio settings can be saved. But why can't bluetooth pairing be saved? Always have to re-pair after turning off the power and the engine. Is there any solution? Thank you very much
Please be sure to install the latest firmware update for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads Please be sure your phone is not connected to another Bluetooth device like a headset or portable speaker. This can block this in-dash receiver from connecting to the phone. I recommend to press the microprocessor reset button on the in-dash receiver. You can find the microprocessor reset button on Pioneer SPH-10BT behind the detachable face near the center of the receiver. You'll need a paperclip or some other small point to press the microprocessor reset button. Next I recommend to delete the phone from the in-dash receiver's Bluetooth memory and to delete the in-dash receiver from the phone's Bluetooth memory and to start the pairing process from the beginning.
I have a problem activating the reverse sensors, the device sends me a message that says "no data" and I can't do more. can you support me with this error please
Please be more specific with your question. What is the model number of your Pioneer in-dash receiver? What is the model number of the parking sensors? Do you have the parking sensor control box plugged directly into the back of the in-dash receiver?
Ive got a problem everything worked for few months and now it doesnt start the aplication i can connect but aplication doesnt start and the lights doesnt turn on the ones supposed to at the bottom on this device
Please be sure you have the latest firmware installed for your Pioneer SPH-10BT. You can find it here; www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads If you have the Pioneer SPH-10BT I recommend this. 1. Delete all phones from the in-dash receivers Bluetooth memory. You can see it here: ruclips.net/video/drZ3Uphj26M/видео.html 2. Press the in-dash receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer SPH-10BT behind the detachable face near the center of the receiver. 3. Delete the in-dash receiver from the phone's Bluetooth Memory. 4. Delete the Pioneer Smart Sync App from the phone. 5. Download and install a fresh copy of the Pioneer Smart Sync App from the App store. 6. Restart the phone. 7 Begin the phone pairing process from the beginning. You can see it here: ruclips.net/video/pmu5ClsfWgk/видео.html You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
As of 2020 January, Pioneer Smart Sync works with Google Maps, Waze, YANDEX, Here Wego, INRIX, Sygic, and iOS Maps. Other navigation apps may be added at a later time. You can find more videos about Pioneer SPH-10BT here: ruclips.net/video/_ISxPmindi4/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
I have connected the ND PS1 parking sensors but I have the "no Data" error when the reverse gear is not inserted and it locks everything. Do I also have to connect the "Revers gear" cable? Where is it?
I recommend to connect the "reverse gear signal input" wire. It's the purple with white stripe on the back of the Pioneer SPH-10BT. You can learn more about the Purple/White wire in this video: ruclips.net/video/-bF3uzzaT30/видео.html Purple/White tells the in-dash receiver the vehicle is in it's reverse gear and this will automatically open the backup sensor window on the Pioneer Smart Sync App and it will automatically close this window when the vehicle is taken out of reverse. Please be sure to update your Pioneer SPH-10BT to the latest firmware. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos about Pioneer SPH-10BT here: ruclips.net/video/vjeZ34q0nvA/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
I recommend to connect the "reverse gear signal input" wire. It's the violet with white stripe on the back of the Pioneer SPH-10BT. You can learn more about the voilet/White wire in this video: ruclips.net/video/-bF3uzzaT30/видео.html violet/White tells the in-dash receiver the vehicle is in it's reverse gear and this will automatically open the backup sensor window on the Pioneer Smart Sync App and it will automatically close this window when the vehicle is taken out of reverse. One common place to connect this wire is the vehicle's Backup Lamp terminal. Please be sure to update your Pioneer SPH-10BT to the latest firmware. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos about Pioneer SPH-10BT here: ruclips.net/video/vjeZ34q0nvA/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
The Pioneer ND-PS1 parking sensor requires a wired connection to the Pioneer SPH-10BT. You can see the connection type in this Pioneer unboxing video: ruclips.net/video/_ISxPmindi4/видео.html You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
@@deckerdotto6035 I'm trying to connect the nd ps1 and in the radio there's a cable with a tag "reverse gear signal input" do you know where I have to connect that cable? Thank you
The Violet wire with White stripe labeled as Reverse Gear Signal Input let's the in-dash receiver know if the vehicle is in it's reverse gear or not. This automatically opens and closes the Parking Sensor window on the Pioneer Smart Sync app. The wire is commonly connected to the vehicle's Back Up Lamp. You can learn more about wiring your Pioneer receiver in this video: ruclips.net/video/-bF3uzzaT30/видео.html It's important to set up the Reverse Gear setting on the SPH-10BT properly to work with your vehicle. You can learn more about it here: ruclips.net/video/drZ3Uphj26M/видео.html You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
@@deckerdotto6035 So I need to connect this violet and white cable to the reverse lamp cable (in the back of the vehicle) just like the one that gives power to the ND-PS1 control box?
There is a setting for Display Off on the SPH-10BT or in the Smart Sync App. You need to switch it off. With the receiver switched on, go into the System Settings and scroll to DISP OFF. Switch this to N. This can also be done in the Smart Sync App when it's connected to the receiver. Settings Display Off, set to No. You can find a full playlist of How To videos from Pioneer about SPH-10BT here: ruclips.net/video/N6Lfcnjyboo/видео.html Please be sure to have the latest firmware installed for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
The Pioneer SPH-10BT internal amplifier is the same as nearly every other modern Pioneer receiver 50w x 4. You can find more videos about Pioneer SPH-10BT in this playlist: ruclips.net/video/vjeZ34q0nvA/видео.html You can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
Please be more specific with your question. It's normal operation for the receiver to shut down when you press and hold the SRC button. You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
@@pioneerelectronics thanks for the answer! But sadly, at 00:30 you press and hold Source and it doesnt turn off. Mine does completely turn black, pressing Source a second time it turns on again.
@@yiggawhat If you have the Pioneer Smart Sync app installed on your phone, and operating, what you are describing is normal operation for the receiver. The message that appears in the video states to download the app and connect it to the receiver. If you have done this, you should not see the message at 0:30 seconds. This video was made in 2019 with an earlier version of the receiver firmware. The message that appears with the latest firmware may be different. Be sure to update your Pioneer SPH-10BT to the latest firmware. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads
If your clock and radio stations reset each time you start your vehicle your in-dash receiver may have an improper connection for the Yellow Wire. The Yellow Wire must have constant power from the vehicle. The Red Wire is for accessory. Do not connect the Red Wire and Yellow Wire together. Please take a look at this video for more information on wiring your Pioneer in-dash receiver: ruclips.net/video/-bF3uzzaT30/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find a full playlist of How To videos about Pioneer SPH-10BT here: ruclips.net/video/JbAC2R4GkjQ/видео.html and you can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
What is the model number of your Pioneer in-dash receiver? In what vehicle is the product installed? In what country are you operating the product? What are you trying to do with it? You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
@@pioneerelectronics hello its imthe sph 10bt its in a bmw e36 in austalia My trouble is i turn of the car and on again and my iphone bluetooth seting when i press conect tells me to forget this device and reconnect it again why is this
Please clarify, do you have the Australian version of the receiver, SPH-C10BT? Or do you have the North American version of the receiver SPH-10BT and you are using it in Australia? If the receiver resets each time you start the vehicle, the receiver may be installed incorrectly. Please focus on the receiver's Yellow Wire. The Yellow Wire operates the receivers clock and needs to have constant power from the vehicle, even when the vehicle is switched off. Do not connect Yellow and Red together. You can learn more about wiring your Pioneer receiver in this video: ruclips.net/video/-bF3uzzaT30/видео.html Please be sure your receiver has the latest firmware installed. If you have the Australian SPH-C10BT You can find it here: www.pioneer.com.au/shop/car/sph-c10bt/ I recommend to press the receivers microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button behind the detachable face near the center of the receiver. After you press the microprocessor reset button, I recommend to delete all phones from the in-dash receiver's Bluetooth Memory. You can see it here: ruclips.net/video/drZ3Uphj26M/видео.html Next delete the in-dash receiver from the phone's Bluetooth Memory. Next, restart the phone. After the phone restarts, I recommend to delete the Pioneer Smart Sync App from your phone, and then download and install a fresh copy of the app. Next begin the phone pairing process from the beginning. You can see it here: ruclips.net/video/pmu5ClsfWgk/видео.html You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Is there parking sensor in DEH-S5250bt model?
No, Pioneer DEH-S5250BT does not work with parking sensors. I recommend the Pioneer SPH-C10BT. You can learn more about it here: ruclips.net/video/_ISxPmindi4/видео.html You can find more information on Pioneer's web site here: SPH-C10BT - Pioneer You can find more videos on Pioneer's RUclips Channel here: pioneerelectronics - RUclips
Thanks for this video ,
You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Hello. Just bought the SPH -10BT. I maybe confused or didn’t do something correctly, but my phone doesn’t come out 3 sections on my phone like on the video. My radio does have the latest update. Could be my phone? What it is that I’m doing wrong?
Is it possible to play music through USB without connecting smart phone ( only plugging USB drive). Bcoz sometimes it happen that battery is very low or dont want to connect smart phone.
Yes, it's possible, though without using the phone, it's more difficult to navigate folders and songs. You can find more How To videos about Pioneer SPH-10BT in this Pioneer You Tube playlist: ruclips.net/video/N6Lfcnjyboo/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
I just want to know why my cradle won’t open.
Here is a How To video from Pioneer showing phone cradle operation: ruclips.net/video/2X0_WyTEMp0/видео.html Please be sure to have the latest firmware installed on your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Are you saying there is a low pass filter built into The receiver for the rear speaker channels? So i could in theory connect small subwoofer speakers directly to the headunit without a power amplifier?
Yes. That's correct. Nearly every modern Pioneer in-dash receiver, SPH-10BT included, is capable of operating a small subwoofer on the in-dash receiver's rear channel. Don't expect to pound nails through concrete with this small subwoofer. It won't. However if you want to operate a 4 ohm or one 2 ohm, 8 inch subwoofer from the rear channel it will work well. You can find the installation manual for Pioneer SPH-10BT here: www.pioneerelectronics.com/StaticFiles/Manuals/Car/SPH-10BT_InstallationManual021919.pdf Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more How To videos about Pioneer SPH-10BT here: ruclips.net/video/-bF3uzzaT30/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
It it only Rear left speakers thats play 4ohm subwoofer on sub/sub setting.
Or is the right speakers also playing sub or fullrange?
The instruction manual is not very clear on this
If you want to run a subwoofer in your vehicle, for best performance, I recommend to use a self powered subwoofer, or a subwoofer paired with an external amplifier. Pioneer offers many to choose from including the TS-WX1210AH seen here: ruclips.net/video/cI9SfaPFenA/видео.html or the GM-D8701 seen here: ruclips.net/video/-Uq25Goo0sU/видео.html paired with the TS-A3002d4 seen here: ruclips.net/video/AfxYsYFnzes/видео.html
It is possible to run a small subwoofer directly from the rear speaker outputs on the in-dash receiver. However, I recommend no larger than 8 inch subwoofer seen here: ruclips.net/video/WkbRBGtW9yM/видео.html
If you try to use a larger than an 8 inch sub you may be disappointed with the performance simply because the in-dash receiver's internal amplifier does not have enough power output to effectively operate a large subwoofer.
In the initial Speaker/PO setup you can choose the Sub/Sub option. If this case you can run a 4 ohm subwoofer on either the rear right or rear left channel with no issues. You can run one 4 ohm subwoofer on the right and one 4 ohm subwoofer on the left at the same time. No problem. Please don't expect huge output. You won't get it.
This changes when using 2 ohms.
It's also possible to run 1 subwoofer wired at 2 ohms ( or 2 subwoofers each with 4 ohm impedance wired in parallel representing a 2 ohm circuit ) on the right rear channel, and leave nothing connected to the rear left channel
Simply terminate the left rear channel properly so no wires or metal come into contact with the bare wires.
This is explained in the installation manual on page 3, numbers 18 and 19.
You can download the installation manual here: www.pioneerelectronics.com/StaticFiles/Manuals/Car/SPH-10BT_InstallationManual021919.pdf
You can learn more about wiring your Pioneer in-dash receiver in this How To video from Pioneer: ruclips.net/video/-bF3uzzaT30/видео.html
You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
@@pioneerelectronics
Thank you very much 🙂
I just want to run two small 5.2 inches bass not a real sub.
i want them to play only low sub output
It was not clear to me if both could play bass but they Can and thats great.👍🏻
Is it possible to install rear view camera ?
As of 2020 February the Pioneer SPH-10BT does not support a back up camera. It does work with rear parking sensors seen here: ruclips.net/video/_ISxPmindi4/видео.html You can find a Pioneer Playlist of videos about SPH-10BT here: ruclips.net/video/wgvHfVus7Xw/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
Hi. I'm using the R/SW RCA outputs for an amplified underseat subwoofer and L RCA outputs for an other amplifier for front speakers. The Full/Sub is the correct setting or an other? Thanks
To clarify, please be more specific with your question. I think you have it correct, but maybe made a typo in your question with "L RCA outputs" ? For a setup with front speakers and a subwoofer, I recommend to use the receiver's FRONT RCA outputs both Right and Left to send signal to the amplifier operating the front speakers. Additionally, I recommend to use the in-dash receiver's Rear/SW RCA outputs, both Right and Left to operate the under seat subwoofer. In the receiver's SP/PO setup menu , I recommend to use the Ful/SUB setting. This will give you a subwoofer control from the in-dash receiver. You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Will it be possible to use just FM radio w/out smartphone?
Please note: The Pioneer SPH-10BT is designed from the ground up to operate with a smart phone used as a remote control to operate the receiver. While it is possible to operate some functions of the AM/FM Tuner and USB music playback, without a smartphone connected for control, it becomes difficult to use without a phone. I strongly recommend to use the Pioneer SPH-10BT with a smartphone to control the receiver. If you are considering buying a new in-dash receiver, but don't always have a smartphone with your, a more traditional in-dash receiver may be a better choice for your particular application. Please consider the Pioneer MVH-S720BHS seen here: ruclips.net/video/FBck5BfCnXE/видео.html You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Sir/madam,
how to input the "100.3" in FM seek manually for the SPH-C19BT
The Pioneer SPH-C19BT is designed to be operated by using the Pioneer Smart Sync App on your iPhone or Android based phone. Please be sure to install the latest firmware for our Pioneer SPH-C19BT. You can find it here: pioneer-india.in/buy/car-entertainment-car-stereos-usb-players/sph-c19bt/ Here is a video explaining FM/AM tuner operation when using the Pioneer Smart Sync App and a similar receiver: ruclips.net/video/wuV0LIVxFes/видео.html You can find a full playlist of How To videos from Pioneer about SPH-10BT here: ruclips.net/video/vjeZ34q0nvA/видео.html and you can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
I have installed a underseat subwoofer which has class d amp in it using rca ....so which setting should I set
I recommend using the Initial Setting SP-PO Mode "REAR/SUB.W" This makes the rear RCA outputs Subwoofer Outputs and it keeps the Rear Speaker level outputs as full range speaker outputs. Use the Rear RCA outputs from the in-dash receiver to send the signal to the subwoofer under the seat. You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Hi
I have hooked it up to my steering wheel control, but the buttons doesn't do the correct thing, there are 3 buttons that changes mode, and the volume button on my steering wheel doesn't do anything. it does beep tho, everytime i presss it. Is there a way to remap the buttons?
thanks
There are no settings to change the commands of the steering wheel controls on the Pioneer SPH-10BT. In most applications, mapping steering wheel controls is done when you program the 3rd party steering wheel control adapter to work with your particular vehicle. I recommend to contact the steering wheel control adapter manufacturer for more information about mapping buttons to the receiver. You can find a full playlist of How To videos from Pioneer about SPH-10BT here: ruclips.net/video/wgvHfVus7Xw/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Hi
I'm using DEH-S1000UB but only left side front and rear speakers out puts are coming. please tell me the settings for all 4 speakers output
Please check the Fader and Balance control on the Pioneer DEH-S1000UB. You can see it here: ruclips.net/video/XXOWoQLwyag/видео.html The Balance control is for Right to Left. The Fader control is for Front to Rear. I recommend Fader control set to 0 and Balance Control set to 0. If this does not correct the issue please check the wiring from the in-dash receiver to the speakers. You can find more information about wiring your Pioneer DEH-S1000UB here: ruclips.net/video/kR2MO2kwFug/видео.html You can find more videos about Pioneer DEH-S1000UB in this Pioneer Playlist: ruclips.net/video/YNniqyTm-TE/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
Deckard!
I have a coup!e of questions on the parking sensors and the sph-bt10 in general:
Can I really not paint the sensors? I'm not really happy about having 4 black circles on my iron grey metallic rear bumper. I see there are loads of painted sensors available on eBay with various paint finishes. Is it really going to affect the sensors that much with a couple of layers of primer and paint?
What happens if one of the sensors fails? Can I replace the sensor with another after market item? The sensors that Pioneer provides, seem to use a common 2 pin connector that every other sensor uses. Do you know if these would work?
I notice the Pioneer Smart sync app recently had an update in Feb 2021. Am I right in thinking that it now can use Google assistant and Siri and not just Alexa as was previously only possible?
I'm a bit worried about this 'purple/white' wire that needs connecting that isn't mentioned in the manual that comes for the Pioneer dear parking sensors. Apparently, without this connection, the Sph-10bt will not work properly with the sensors. Will this purple/white wire be long enough to reach from the receiver to the back of my saloon vehicle's reversing brake wires in order to make the connection, or will I have to solder on another wire to extend the length?
Do you think an amendment needs to be made to the manual, to mention this previously, undisclosed information about the purple/white wire maybe? I only heard about this from searching on the internet and finding out from others who had this issue.
Lastly, do you know what other features we have in store for the smartsync app and the Sph-10bt in general?
Thanks!👍
You can apply what we call a “skim coat“ to the sensors. These are aluminum sensors, as all ultrasonic parking sensors are. A skim coat simply means a very thin coat which will approximate the color of your bumper. You can also sand off the color that they come with and just have raw aluminum sensors. I do that for certain vehicles.
Can I connect to reserve parking camera to show it on my phone?
As of 2019 September, no camera option is available for the Pioneer SPH-10BT. Parking sensors are available with the Pioneer ND-PS1. You can see it here: ruclips.net/video/_ISxPmindi4/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more How To videos about Pioneer SPH-10BT in this Pioneer You Tube Playlist: ruclips.net/video/N6Lfcnjyboo/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
Hello
Is it possible to add a remote control to the SPH-10BT ?
Yes, you can use a wireless remote control with the Pioneer SPH-10BT. I recommend Pioneer part QXE1044. Pioneer's Authorized Parts Distributor in the US is PACParts. You can find them here: www.pacparts.com/part.cfm?part_no=QXE1044&mfg=Pioneer Of course using the Pioneer Smart Sync App on your phone to control the SPH-10BT receiver is an important part of the system. You can see it here: ruclips.net/video/pmu5ClsfWgk/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
How to save the audio setting? Is that autosave if I turn off the power? Because, my sph10bt is auto reset if I turn off the power and car. FYI I didn't use the sync app, I just make an audio setting on the head unit.
If the system resets each time your turn off the car, you may have the in-dash receiver wired incorrectly. Please focus on the Red Wire and the Yellow Wire. Do Not connect red and yellow together. Red is for ignition. Yellow is for constant power for memory functions like radio station presets and audio settings. You can learn more about wiring your Pioneer in-dash receiver here: ruclips.net/video/-bF3uzzaT30/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos about Pioneer SPH-10BT here: ruclips.net/video/wgvHfVus7Xw/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
@@deckerdotto6035 I exchanged red and yellow wires. The audio settings can be saved. But why can't bluetooth pairing be saved? Always have to re-pair after turning off the power and the engine.
Is there any solution?
Thank you very much
Please be sure to install the latest firmware update for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads Please be sure your phone is not connected to another Bluetooth device like a headset or portable speaker. This can block this in-dash receiver from connecting to the phone. I recommend to press the microprocessor reset button on the in-dash receiver. You can find the microprocessor reset button on Pioneer SPH-10BT behind the detachable face near the center of the receiver. You'll need a paperclip or some other small point to press the microprocessor reset button. Next I recommend to delete the phone from the in-dash receiver's Bluetooth memory and to delete the in-dash receiver from the phone's Bluetooth memory and to start the pairing process from the beginning.
I have a problem activating the reverse sensors, the device sends me a message that says "no data" and I can't do more. can you support me with this error please
Please be more specific with your question. What is the model number of your Pioneer in-dash receiver? What is the model number of the parking sensors? Do you have the parking sensor control box plugged directly into the back of the in-dash receiver?
Ive got a problem everything worked for few months and now it doesnt start the aplication i can connect but aplication doesnt start and the lights doesnt turn on the ones supposed to at the bottom on this device
Please be sure you have the latest firmware installed for your Pioneer SPH-10BT. You can find it here; www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads If you have the Pioneer SPH-10BT I recommend this. 1. Delete all phones from the in-dash receivers Bluetooth memory. You can see it here: ruclips.net/video/drZ3Uphj26M/видео.html 2. Press the in-dash receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer SPH-10BT behind the detachable face near the center of the receiver. 3. Delete the in-dash receiver from the phone's Bluetooth Memory. 4. Delete the Pioneer Smart Sync App from the phone. 5. Download and install a fresh copy of the Pioneer Smart Sync App from the App store. 6. Restart the phone. 7 Begin the phone pairing process from the beginning. You can see it here: ruclips.net/video/pmu5ClsfWgk/видео.html You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Is this compatible with my TomTom maps app or is it limited to Google and Waze ?
As of 2020 January, Pioneer Smart Sync works with Google Maps, Waze, YANDEX, Here Wego, INRIX, Sygic, and iOS Maps. Other navigation apps may be added at a later time. You can find more videos about Pioneer SPH-10BT here: ruclips.net/video/_ISxPmindi4/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
I have connected the ND PS1 parking sensors but I have the "no Data" error when the reverse gear is not inserted and it locks everything. Do I also have to connect the "Revers gear" cable? Where is it?
I recommend to connect the "reverse gear signal input" wire. It's the purple with white stripe on the back of the Pioneer SPH-10BT. You can learn more about the Purple/White wire in this video: ruclips.net/video/-bF3uzzaT30/видео.html Purple/White tells the in-dash receiver the vehicle is in it's reverse gear and this will automatically open the backup sensor window on the Pioneer Smart Sync App and it will automatically close this window when the vehicle is taken out of reverse. Please be sure to update your Pioneer SPH-10BT to the latest firmware. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos about Pioneer SPH-10BT here: ruclips.net/video/vjeZ34q0nvA/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
@@deckerdotto6035 bro help, i have the same problem, where connect this purple and white cable ??
I recommend to connect the "reverse gear signal input" wire. It's the violet with white stripe on the back of the Pioneer SPH-10BT. You can learn more about the voilet/White wire in this video: ruclips.net/video/-bF3uzzaT30/видео.html violet/White tells the in-dash receiver the vehicle is in it's reverse gear and this will automatically open the backup sensor window on the Pioneer Smart Sync App and it will automatically close this window when the vehicle is taken out of reverse. One common place to connect this wire is the vehicle's Backup Lamp terminal. Please be sure to update your Pioneer SPH-10BT to the latest firmware. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos about Pioneer SPH-10BT here: ruclips.net/video/vjeZ34q0nvA/видео.html and you can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
So to connect the parking sensor brain to the sph-10bt you need to do it with a wire or wireless ?
The Pioneer ND-PS1 parking sensor requires a wired connection to the Pioneer SPH-10BT. You can see the connection type in this Pioneer unboxing video: ruclips.net/video/_ISxPmindi4/видео.html You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
@@deckerdotto6035 I'm trying to connect the nd ps1 and in the radio there's a cable with a tag "reverse gear signal input" do you know where I have to connect that cable? Thank you
The Violet wire with White stripe labeled as Reverse Gear Signal Input let's the in-dash receiver know if the vehicle is in it's reverse gear or not. This automatically opens and closes the Parking Sensor window on the Pioneer Smart Sync app. The wire is commonly connected to the vehicle's Back Up Lamp. You can learn more about wiring your Pioneer receiver in this video: ruclips.net/video/-bF3uzzaT30/видео.html It's important to set up the Reverse Gear setting on the SPH-10BT properly to work with your vehicle. You can learn more about it here: ruclips.net/video/drZ3Uphj26M/видео.html You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
@@deckerdotto6035 thank you I managed to fix it !
@@deckerdotto6035 So I need to connect this violet and white cable to the reverse lamp cable (in the back of the vehicle) just like the one that gives power to the ND-PS1 control box?
How can I get the display on the stereo to stay on. It only stays on for a couple of seconds and then it says display off?
There is a setting for Display Off on the SPH-10BT or in the Smart Sync App. You need to switch it off. With the receiver switched on, go into the System Settings and scroll to DISP OFF. Switch this to N. This can also be done in the Smart Sync App when it's connected to the receiver. Settings Display Off, set to No. You can find a full playlist of How To videos from Pioneer about SPH-10BT here: ruclips.net/video/N6Lfcnjyboo/видео.html Please be sure to have the latest firmware installed for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
What is power rating of it? Is it 50w X 4?
The Pioneer SPH-10BT internal amplifier is the same as nearly every other modern Pioneer receiver 50w x 4. You can find more videos about Pioneer SPH-10BT in this playlist: ruclips.net/video/vjeZ34q0nvA/видео.html You can find more videos on Pioneer's You Tube Channel here: ruclips.net/user/pioneerelectronics
when i press and hold source off, it shuts down every time. What am i doing wrong?
Please be more specific with your question. It's normal operation for the receiver to shut down when you press and hold the SRC button.
You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
@@pioneerelectronics thanks for the answer!
But sadly, at 00:30 you press and hold Source and it doesnt turn off. Mine does completely turn black, pressing Source a second time it turns on again.
@@yiggawhat If you have the Pioneer Smart Sync app installed on your phone, and operating, what you are describing is normal operation for the receiver. The message that appears in the video states to download the app and connect it to the receiver. If you have done this, you should not see the message at 0:30 seconds.
This video was made in 2019 with an earlier version of the receiver firmware. The message that appears with the latest firmware may be different.
Be sure to update your Pioneer SPH-10BT to the latest firmware. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads
How do I install it so that I don’t have to reconnect manually every time I start up car?
If your clock and radio stations reset each time you start your vehicle your in-dash receiver may have an improper connection for the Yellow Wire. The Yellow Wire must have constant power from the vehicle. The Red Wire is for accessory. Do not connect the Red Wire and Yellow Wire together. Please take a look at this video for more information on wiring your Pioneer in-dash receiver: ruclips.net/video/-bF3uzzaT30/видео.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find a full playlist of How To videos about Pioneer SPH-10BT here: ruclips.net/video/JbAC2R4GkjQ/видео.html and you can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
Hello if you still answer to comments i have a question:)
What is the model number of your Pioneer in-dash receiver? In what vehicle is the product installed? In what country are you operating the product? What are you trying to do with it? You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics
@@pioneerelectronics hello its imthe sph 10bt its in a bmw e36 in austalia
My trouble is i turn of the car and on again and my iphone bluetooth seting when i press conect tells me to forget this device and reconnect it again why is this
Please clarify, do you have the Australian version of the receiver, SPH-C10BT? Or do you have the North American version of the receiver SPH-10BT and you are using it in Australia? If the receiver resets each time you start the vehicle, the receiver may be installed incorrectly. Please focus on the receiver's Yellow Wire. The Yellow Wire operates the receivers clock and needs to have constant power from the vehicle, even when the vehicle is switched off. Do not connect Yellow and Red together. You can learn more about wiring your Pioneer receiver in this video: ruclips.net/video/-bF3uzzaT30/видео.html Please be sure your receiver has the latest firmware installed. If you have the Australian SPH-C10BT You can find it here: www.pioneer.com.au/shop/car/sph-c10bt/
I recommend to press the receivers microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button behind the detachable face near the center of the receiver.
After you press the microprocessor reset button, I recommend to delete all phones from the in-dash receiver's Bluetooth Memory. You can see it here: ruclips.net/video/drZ3Uphj26M/видео.html
Next delete the in-dash receiver from the phone's Bluetooth Memory.
Next, restart the phone.
After the phone restarts, I recommend to delete the Pioneer Smart Sync App from your phone, and then download and install a fresh copy of the app. Next begin the phone pairing process from the beginning. You can see it here: ruclips.net/video/pmu5ClsfWgk/видео.html You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics