Installing Remote Control Switching System - Blackt Electrotech - 4 Lights & 1 Fan Unit
HTML-код
- Опубликовано: 7 янв 2018
- A brief demonstration on how to install Remote Control Switching System.
Purchase Link:
www.amazon.in/Blackt-Electrot... - Развлечения
In case of power gone and no inverter back up, do the device has memory? or all lights n fan will start after power comes.
Yes it has an internal memory to remember the last state. If the fan or the lights were on before the power went off they will remain on after the power is back. And if they were off they will remain off.
Viru Jadhav BM
@@syedfazu sir I'm from Hyderabad. I want to connect remote for my geyser in bathroom to control inside the bathroom. Please help me out with, is this helpful to fix to it.. share ur email please to contact u. Thank you 😊
@@srujanayadavalli9132 This Remote Control Switch has a load capacity of 1000W per point. Usually geysers have the load consumption of around 4000W which can't be operated by this Remote Switch. If you would like installation support other than that, my email address is syedfazu@gmail.com.
Amazingly well explained, brother. This cleared all my doubts. You should definitely make more such explainer videos - you're born for it :)
Thank you Sir.
I had some doubts regarding connections....now its clear. Thanks👍
Sirjee aapne bahut bahut achi prakarse hame samzaya. I am very happy to see your video in detail. Lot of thanks for sharing your knowledge.
Bahut dhanyavad sir. Really glad to know that you find my video helpful.
Excellently explained. Keep up the good work!
i am ordered and purchase your link. today iam install in my home. your guidence. pakka working . i dont know electrical. fitting. today iam learn. first thanks for you.
Wow. Really happy to know that you find it helpful and did the installation by yourself. Enjoy wireless switching!
YOUR COMMUNICATION SKILL IS VERY GOOD BRO
Beautiful video, well explained in every detail.
Thanks for sharing this video
On my best wishes for your future endeavours.
Take care and god bless you all,
Thank you very much sir for all the wonderful words. Do take very good care of yourself too.
This is a very helpful video. And thanks for make the video practically. it's very helpful for me.
Thanks bro. I am glad it helped.
Absolutely this is very useful video. And you very perfectly explained. Thank you bro
very good explanation and a lay man also can fix this unit with your help.
Thank you bro. I am glad it helps.
Boss you mentioned that some were it is neutral connection is it phase cut off or neutral.we should have to connect for switch phase wire no
Very nice presentation keep up the communication skills
Wonderful explained bro. Hats off👍👍👍
Very good 👍 keep it up
You mentioned somewhere in video "negative terminal of the switch". Apart from that, this Video is Awesome!
Yeah I agree dude. Sorry about that. It was unintentional.
It is phase wire ha
sir, can I get resistance details inside switch or diagram of circuit. Once when 1 capacitor was burnt, I replaced and it worked fine.Again something is wrong and I doubt that it may be resistor. But unable to know its capacity as the color on resistor is not clear .please help me
Good stuff. Thanks!
Excellent nice work. Best demo
Very well made video, bro.... Extremely useful.... Keep making many such videos.... 👍👍👍👍👍
Glad it helped bro. Thanks for the inspiring words.
Good explanation 👌
super . now i am understand. proper guidence. thank you brother. now i can install in my home. no one electrician. i can do that
Thanks bro. Glad it helped.
How much price
How much price
Good explanation for wiring diy
Good presentation
Thanks bhau khup chan
Switches do not have phase and neutral together, one is input and the other is output to the unit.
Firstly, I would like to thank you for correcting me. My sole intention of making this video and uploading on RUclips was to be helpful to others who would like to do the installation by themselves. I do accept that I might not have used the right terminology throughout the video as I am somebody who do not belong to electrical background. Everything that I learned regarding this was self taught. Again I really appreciate your inputs in correcting me.
Thanks brother . Instead of light bulb can I use it to switch on/off TV ?
You can use it to operate a TV if its power cable is internally connected to the switch board. If that is not the case usually a TV is connected to a socket through a plug. Connect one of the wires from the unit to the load point of the switch of the socket and you can operate any device/appliance connected to the socket including your TV. I recently used this method to operate my Mosquito Repellent in my room.
Can you plz let me know how to connect a 2 way switch to it...plz help
For a 2 way switch system I would prefer to install in the switch board which has the most number of switches so that I could optimally make use of all the wires in the wireless unit for different loads. For the operations using the remote, one has to make sure that a point is switched off in the manual switch boards in the 2 way switch system.
Thanks brother
Noise problem fan speed mein hai ya nahi
Easy installation it took me around just under 5 minutes to install! But the one i bought was a cheap product, remote IR sensor not very strong for some light, orelse it's great! But for a trial I just bought the cheap one, will buy the good ones next time! Very goid explanation! But one problem is when light goes off, and comes back the phase line that was connected to the one light switch, turns on! 🤔🤔 Any solution in that??
It has an internal memory to remember the last state. If the fan or the lights were on before the power went off they will remain on after the power is back. And if they were off they will remain off.
Very good
very good
Thanks for the video...I have ordered one from Amazon..just wanted to know as I have 2 two way switches..so how does the connection work?..please reply...thanks
For a 2 way switch system I would prefer to install in the switch board which has the most number of switches so that I could optimally make use of all the wires for different loads in the wireless unit. For the operations using the remote, one has to make sure that a point is switched off in the manual switch boards in the 2 way switch system.
Thanks Syed...
You are most welcome Abhi.
I have purchased this same product for about
Rs. 950/ from Amazon a year ago, it is working properly, I don't know about other product quality,
Here why I am showing my existence is that it has one problem with 2 way switch, if your power supply is from this switch board and output is from other switch board than it will not work, in that case, you will have to change your wiring that is give your input supply from the other switch board and connect your device that is your light or fan in the middle point of 2 way switch in this switch board in which you are connecting your wireless device, and connect this wireless device wire in the same middle point of 2 way switch in the output point from where it goes to your light or fan, this is how it will work in 2 way switch, hope I have clear some ones doubt if it works in 2 way switch or not.
If you connect your device in the manner I have tried to explain it will work properly, otherwise it will not work, in the beginning I had this problem but when I changed my wiring it started working properly.
thank u well made video dear
You are welcome!
Thank you sir
You are welcome sir.
Very good NJAN ORDER CHEYITHU
When switch on in manual after that swith of it in remote any problem?
It doesn't work. If you turn the switch on in manual then you have to turn the switch off in manual only. Similarly for the remote. This is demonstrated in the video as well close to the end.
Assalamualaikum
I just want to know, how this will work in case inverter installed houses. Inverters will take al least of 2 seconds of delay is that report controlling unit has any memory unit to operate
Wa alaykum salaam. Yes it does have an internal memory to remember the last state of load points.
Oh got it, thank you
And one more thing your video is very practical, and you have explained very clearly about the installation even about the drill bits😁😁 thanks for your video
Thank you very much for the kind words bro. I'm glad it helped.
After the connection, can we On/Off the switches directly if the sensor/device get damaged?
Sure we can use the physical switches if the sensor unit is damaged. This is in fact one of the advantages of this system.
@@syedfazuThank you, Can you please suggest me a well performed device which can control 2 fan with regulators and 4 lights.
@@abhijitp1kvrkl There's another one for 8 lights and 2 fans. Link below:
www.amazon.in/Blackt-Electrotech-Wireless-Remote-Control/dp/B01KMEB8XQ
super bro
Super..👍👍
Bro, How to handle if a fan and light alone has inverter connection.
If only a fan and a light is connected to an inverter, then only the fan and the light would remain on after the main power goes off. Connections remain the same for all the loads.
Nice video
Thankyou sir...
You are welcome Sir!
good keep it up bro
Good video
Can we add a smart switch to the this setup and add the flexibility of alexa too?
Well this is actually a very cool idea. I have never used a Smart Switch. If it has terminals then we can definitely connect it to one of the points of the Remote Switch. Not sure if we can operate the lights/fan using Alexa.
Could you please send me link where we can get smart switches.
Bro is it work in 2 way switch connection..? If it works plz tell me the connection...
For a 2 way switch system I would prefer to install in the switch board which has the most number of switches so that I could optimally make use of all the wires in the wireless unit for different loads. Connections remain the same as shown in the video. For the operations using the remote, one has to make sure that a point is switched off in both the manual switch boards in the 2 way switch system.
Sir iski yellow wire Ko kya switch ke nutaal me lagana h kya
Yellow wire ko switch ke load mein lagana hai. Video mein galti se mene switch ka neutral keh diya tha. Switch mein ek phase hota hai aur doosra load.
Wow... Really gd
tq
What if i have only two lights in my room, ? Can i leave the rest of the 2 yellow wires without connecting ??
Yes you can leave the other unused wires blank. It works perfectly.
Can i use one yellow wire for exhaust fan .....pls tell me
Sure you can. You can connect the yellow wire to any load upto 1000 Watts.
@@syedfazu if there is a inverter connection in board will this work
Can i increase the yellow or blue wire length......will it work
I don't see any issues in extending the wire length. Should work.
My regulator stops working what should i do
Nice
well good idea. how much , where is this
Ye mobile se cantrol ho Sakta hai kya? mere paas redmi ka mobile hai.usme mi remote inbuilt app hai.please reply!
Sorry bro. Yeh wala unit mobile se control nahi hoga. Sirf remote se hi hoga. However I guess there are other units in the market which can be controlled by mobiles. Though not very widely used now a days but we might see such products in the future very commonly used. In fact I would love to have one such. Do a bit of Google search and you might find one which suits you well.
ho jaega mobile se.. ek bar iske remote ki pairing krni padegi bas mi remote app mai
Great
Is it working with two way stitches
For a 2 way switch system I would prefer to install in the switch board which has the most number of switches so that I could optimally make use of all the wires in the wireless unit for different loads. Connections remain the same as shown in the video. For the operations using the remote, one has to make sure that a point is switched off in both the manual switch boards in the 2 way switch system.
Can we use this for water motor and water cooler sir....
Be very careful with Water pumps. Look at the wattage on the specifications. It should be less than 1000 Watts. It should work fine with Water cooler as most of them are under 1000 Watts. Just to be on the safe side, check out for this too.
Sir what is the range of remote?
According to the product description, it's 42 feet.
nice
I need this remote control device so how to purchase the device
Please refer to the link below:
www.amazon.in/Blackt-Electrotech-Wireless-Control-Regulation/dp/B00K72A498/ref=sr_1_12?s=kitchen&ie=UTF8&qid=1519078816&sr=1-12&keywords=Blackt+electrotech
Your awesome
good job bro
Nice bro
aur santosh bhai
Sir Can I use 4(6wat) light in one chanel
The load capacity for one switch point is 1000W. For four 6W lights bulbs the load is 6X4=24W. So you can definitely use them in one switch point. But when you are operating the switches all the four light bulbs with go on and off at the same time in one go.
thank u sir
What cost of this unit and where will we purchase any online link is there
Hello. Please refer to the description of the video for the purchase link.
hello sir
i have an doubt
please clear it
my 4 way controller has 4 button for 4 application
but the total wire is 7
2 for ac input and output
4 is for negative end of witch of which we have to do
and the last one????????????????????
please explain it sir
please
Last one is for the fan. You may still use it to connect to any appliance without using the regulator in the remote.
@@syedfazu no sir
my 4 way controller is for inly 4 device
and have 4 button
@@syedfazu please tell me
@@syedfazu ye h
www.amazon.in/Sisah-Digital-Remote-Control-Wireless/dp/B0746MZRJT/ref=sr_1_1?keywords=4+way+controller&qid=1564044052&s=gateway&sr=8-1
@@syedfazu please reply sir
please
Bro can we use this for led lights
Sure you can.
How much cost in the remote control set.
Please refer to the description of this video for the purchase link.
What is the price of this
Hindi Boone me warm aata kya
How to purchase the unit and cost
Please refer to the link below:
www.amazon.in/Blackt-Electrotech-Wireless-Control-Regulation/dp/B00K72A498/ref=sr_1_12?s=kitchen&ie=UTF8&qid=1519078816&sr=1-12&keywords=Blackt+electrotech
Wat if i would order this product
Then it will get delivered at your home.
dear how can im tack the remote
Please find the purchase link in the description.
The device is good but it should also have an ontoff switch as the remote never runs and if light, fan is to be tied, the electrician can lock the device till arrival.
Super An
price?
hello brother any other videos for yours.
Hello brother. There are other videos in my channel but I assume you are particularly looking for any electronics / electrical devices installation videos. Presently, this is the only installation video I have but I might come up with another one very soon. Just keep checking my channel or subscribe to my channel and hit the bell icon so that you will be notified as soon as I upload a new video.
Assalamualaikum Bhai Jaan kya ye two way jesa kaam Karey ga bhai please jaldi reply do mere ghar ka kaam chalo hai
Wa alaykum salaam. Sorry bhai yeh wala 2 way jaisa kaam nahi karega. Ya toh remote se operate karna hoga ya toh switch board se. Dono ek saath kaam nahi karte. 2 way jaise use karna ho toh modular wireless switch lene chahiye.
konsa website me milega
Amazon par. Please check the description for the purchase link.
Super bro
p.naveen kumar g
An Indian by far who could speak such clear and understandable English.
Wow!!! Thanks brother. I'm sure I'm not the only one.
Mera Two switch hai
A device accept hoga
Yes hoga. Aapko is device ke sirf two hi wires use karne hoge switch ke liye. Baki ke wires khali rakhna hoga.
I need this remote control prise
Please refer to the link below:
www.amazon.in/Blackt-Electrotech-Wireless-Control-Regulation/dp/B00K72A498/ref=sr_1_12?s=kitchen&ie=UTF8&qid=1519078816&sr=1-12&keywords=Blackt+electrotech
two way switch me kase instal kare
For a 2 way switch system I would prefer to install in the switch board which has the most number of switches so that I could optimally make use of all the wires in the wireless unit for different loads.
For the operations using the remote, one has to make sure that a point is switched off in the manual switch boards in the 2 way switch system.
Bro sent photos after installed plz
It's available in ap
It's available on Amazon. Link in the description.
Instead of Drilling holes in Modular Plates, Could've used Modular cord outlet.
How much rupees remote control sir please tell me
Please find the purchase link in the description.
What is the cost of the unit
Please refer to the link below:
www.amazon.in/Blackt-Electrotech-Wireless-Control-Regulation/dp/B00K72A498/ref=sr_1_12?s=kitchen&ie=UTF8&qid=1519078816&sr=1-12&keywords=Blackt+electrotech
I have purchased this same product for about
Rs. 950/ from Amazon a year ago, it is working properly, I don't know about other product quality,
Here why I am showing my existence is that it has one problem with 2 way switch, if your power supply is from this switch board and output is from other switch board than it will not work, in that case, you will have to change your wiring that is give your input supply from the other switch board and connect your device that is your light or fan in the middle point of 2 way switch in this switch board in which you are connecting your wireless device, and connect this wireless device wire in the same middle point of 2 way switch in the output point from where it goes to your light or fan, this is how it will work in 2 way switch, hope I have clear some ones doubt if it works in 2 way switch or not.
If you connect your device in the manner I have tried to explain it will work properly, otherwise it will not work, in the beginning I had this problem but when I changed my wiring it started working properly.
Hi
Drill machine link plz
www.amazon.in/gp/product/B00ICIKMSM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
thx
What about two way fan switch
Two way is altogether a different story bro. Not sure about it.
I bought it, and connected it to only light points. I am confused about two way fan connection...
remote range ?
The product description says 42 feet.
very good मुझे इस इलेक्ट्रॉनिक का परचेस लिंक चाहिए
Thanks. Please refer to the link below.
www.amazon.in/Blackt-Electrotech-Wireless-Control-Regulation/dp/B00K72A498/ref=sr_1_12?s=kitchen&ie=UTF8&qid=1519078816&sr=1-12&keywords=Blackt+electrotech
Hindi me batyae
Sir इसका लोकल मार्किट में कीमत क्या है......4 wire का...
What is name and Price of this device
Please refer to the description of the video for the purchase link.
Price of this ?
Please refer to the link below:
www.amazon.in/Blackt-Electrotech-Wireless-Control-Regulation/dp/B00K72A498/ref=sr_1_12?s=kitchen&ie=UTF8&qid=1519078816&sr=1-12&keywords=Blackt+electrotech
a switch connection doesn't have any neutral point upper 1 also a phase and the lower connection also a phase bro
One is phase and the other is load. That was an error in the video. I have already acknowledged it in my previous comments.