@@allenwilhelm7799With soldering iron itself the contact area between fret and iron is fraction of the area while using soldering tin. Imagine round tip of iron and round fret touching, the area is extremely small. The area is crucial for heat transfer, that is the reason of car radiator or CPU heatsink shapes, they are made to have the biggest possible area of contact with air to which they transfer the heat. The tin covers much bigger area of soldering iron tip and the fret and acts as heat conductor. It has the same purpose as thermal paste used between CPU and heatsink. In practice you can heat the fret few times faster this way. This way you also can avoid overheating the fretboard wood, because it shortens the process. Overheating the fretboard may cause problems with fretboard finish (it can be lacquered, finished with oil or so), melting the binding if you have one, in extreme case it can also melt the glue used to fix the fretboard to the neck. On maple fretboards you can also burn or discolour the wood if you heat it for long time.
Si fa prima così:- togli i tasti-pulisci bene le scanalature-metti pasta di legno negli alloggiamenti-poi una leggera scartavetratura - e infine passi olio di limone x lucidarla e abbassi il capotasto....fine-
what finish is being applied and are you sanding it on or using a cloth? Is that epoxy glue, polyurethane, oil or what?
Beautiful work! Is that your own bass, or do you work on other people’s instrument?
Di luar jendela terang kayak siang tapi ada suara jangkrik. Seru juga bang :)
impecable ! un abrazo -!
Please diferents links for tools and wood for fret , finish glue and after oil or others ?
Hampa skalii yahhh wkwk
Workshopnya di daerah mana om?
Berapa ya budgetnya om? Mau juga nih
Kayak main biola ms wkwkwk
The soldering iron is there to heat up the glue and make it easier to pull out, there is no reason to actually put solder on the fret lmao
There is a reason, soldering tin makes heat transfer much faster as the contact area gets much bigger with it, try it yourself. LMAO
Heat doesn’t transfer in wood. You put a soder on the wood, you will burn it. Heat on the frets transfers to the glue without burning the wood…….lmao
Bang kalo boleh tau plus minus nya fretlees apa ya ?
Just if you like it or not. I guess you can get more precise intonation, if you play perfectly. It also has a cool sound
lagi nyari jangkrik nya nih
Pakai flatwound mas Andri?
Hope so, round wounds will chew up a fingerboard.
I can understand why heat is being applied to the frets. Why is Solder (hopefully pronounced the American way) being applied?
Heat transfer...but I wouldn’t do it. Too much work for not much return...unless you have a really stubborn fret.
@@dive7733but why use actual solder rather than just moving the hot soldering iron across the frets?
@@allenwilhelm7799With soldering iron itself the contact area between fret and iron is fraction of the area while using soldering tin. Imagine round tip of iron and round fret touching, the area is extremely small. The area is crucial for heat transfer, that is the reason of car radiator or CPU heatsink shapes, they are made to have the biggest possible area of contact with air to which they transfer the heat. The tin covers much bigger area of soldering iron tip and the fret and acts as heat conductor. It has the same purpose as thermal paste used between CPU and heatsink. In practice you can heat the fret few times faster this way. This way you also can avoid overheating the fretboard wood, because it shortens the process. Overheating the fretboard may cause problems with fretboard finish (it can be lacquered, finished with oil or so), melting the binding if you have one, in extreme case it can also melt the glue used to fix the fretboard to the neck. On maple fretboards you can also burn or discolour the wood if you heat it for long time.
Ini yang sebenarnya,
Kalau orang lagi kerja,jangan diajakin ngomong.
Ntar kena lempar,
Hehehehe...
Si fa prima così:- togli i tasti-pulisci bene le scanalature-metti pasta di legno negli alloggiamenti-poi una leggera
scartavetratura - e infine passi olio di limone x lucidarla e abbassi il capotasto....fine-
Meglio pezzettini di legno come la video chè pasta di legno, veramente.
I wouldn’t use wood putty...but it’s an option.
Ngomong dong bang
Bunyinya aneh🤣
mungkin kuping anda masih minim pengalaman ✌️
@@bassboisgarage8932 iyah suhu
Baik kisanak