Cone development in AutoCAD

Поделиться
HTML-код
  • Опубликовано: 3 янв 2025

Комментарии •

  • @rajeev7280
    @rajeev7280 2 года назад +2

    Thanks you sir for useful information

    • @mcadengineer6638
      @mcadengineer6638  2 года назад +1

      Tq Stay tune with Mcad Engineer for more informative video..

  • @venkateshk1455
    @venkateshk1455 Год назад +1

    Thank you for the detailed video. 🙏

  • @isteyakkhan5527
    @isteyakkhan5527 2 года назад +1

    Very Nice Sir...

  • @tasadduqmajeed68
    @tasadduqmajeed68 2 года назад +1

    Excellent, Sir.

  • @MYTRADINGCO.
    @MYTRADINGCO. 10 месяцев назад

    thanks for sharing

  • @saikiranreddy930
    @saikiranreddy930 2 года назад +1

    Sir please start your classes as soon as possible... You teach in a very easy manner...

  • @karanveersingh-xf8hc
    @karanveersingh-xf8hc 2 года назад +1

    excelent brother

  • @natarajanvignesh5641
    @natarajanvignesh5641 2 года назад +1

    Dear sir,
    Thank you for your video for cone development.its very useful for everyone and your teaching skills . iam a mechanical engineer (fabrication engineer)
    Infuture post a video Regardsing transition piece cone development and double outlet cone etc.,
    We are waiting for your videos.

  • @adrianopittavino7833
    @adrianopittavino7833 3 месяца назад

    आपने मुझे बचा लिया, धन्यवाद

  • @adinisdelva2975
    @adinisdelva2975 2 года назад +1

    FELICIDADES!
    Aprendí mucho

  • @pvenkatesh7730
    @pvenkatesh7730 2 года назад +1

    Wow

  • @mechanicaldesigners5236
    @mechanicaldesigners5236 2 года назад +1

    Thank you so much❤😊

  • @rehanshaikh5312
    @rehanshaikh5312 6 месяцев назад

    Very nice

  • @Brandedyadav2322
    @Brandedyadav2322 Год назад +1

    Very clear information 🙂

  • @tanumoypal9149
    @tanumoypal9149 2 года назад +1

    Awesome sir ji.... please tell what dia to be considered during this calculation i.e. (mean dia or od or id) for fabricating this type of duct from a 10mm Thk. Plate....

    • @mcadengineer6638
      @mcadengineer6638  2 года назад +1

      Always consider means dia during fabrication for perfect fit

    • @tanumoypal9149
      @tanumoypal9149 2 года назад +1

      @@mcadengineer6638 Okay sir...A lot of thanks to you sir for your response..

  • @kitasuhill9667
    @kitasuhill9667 9 месяцев назад +2

    did you allow for additional material to join each end ?

  • @zahidhussain480
    @zahidhussain480 21 день назад

    In this thickess of plate considered

  • @hamisusani2069
    @hamisusani2069 Год назад +1

    This is a very good tutorial, could you please translate into English?

  • @valentinlishkov9540
    @valentinlishkov9540 Год назад +1

    We start creating a catalog with specialists

  • @karanveerdev994
    @karanveerdev994 2 года назад +3

    Dost aap ne galat line ko select Kia ha jab aap trim kar rhe the to galat line ko select kar liya
    Center Vali line ko select karna tha

  • @krunalsoni5744
    @krunalsoni5744 Год назад

    THK. MINUS KARENGE TOH ARC LENGTH CHANGE HOGA ...

  • @kamalkantdeshmukh448
    @kamalkantdeshmukh448 2 года назад +1

    How to join your class sir

    • @mcadengineer6638
      @mcadengineer6638  2 года назад +1

      Tq for ur response kamalkant
      Very soon I will start my class then I will be inform u

  • @_amartz._
    @_amartz._ Год назад

    Trim karne ke liye aapne center line se trim karna tha... Kuch galat hai video me?
    Please clear

  • @MizanurRahman-uz3bl
    @MizanurRahman-uz3bl Месяц назад

    59.18 degree kaisa aia

  • @rkkaruturi
    @rkkaruturi Месяц назад

    @ 4:17 point was not clear

  • @abdulmainuddin5520
    @abdulmainuddin5520 2 года назад +1

    L=12166 kaise Aya bataia

    • @mcadengineer6638
      @mcadengineer6638  2 года назад

      Cone ki line Ko extende Karo jab tak wo ek dusre Ko intersect nhi karte
      Then measure inclined length = 12166

  • @vairavanathanalagarsamy764
    @vairavanathanalagarsamy764 6 месяцев назад +1

    😢 it did not extract

  • @abdulmainuddin5520
    @abdulmainuddin5520 2 года назад +2

    Quickly tell me Like please

  • @razahusian1753
    @razahusian1753 Год назад

    5456 35 inchi

  • @krunalsoni5744
    @krunalsoni5744 Год назад

    BUT THK. NAHI MINUS KIYA ..

  • @valentinlishkov9540
    @valentinlishkov9540 Год назад

    )( look at me
    we accept orders