Man that good looking little truck, I may have to get one of these! Great video and I am glad he didn't get stuck on the big sand hill, that may have been hard for him to get out of!! Merry Christmas 🎄
Hallo Matteo ! einfach mal DANKE für die super tollen Video's von Dir !! Hilft so manchem zur Kaufentscheidung ... Habe mich nun auch entschieden , für ein weiteres Projekt ;-) danke nochmals und e Guts Nöis !! Grüessli Thomy
Could you recommend a longer steering shaft and longer rear axle shaft for this Red FMS K10 (or Glacier)? Maybe a full compatible axle set. I want to make the car wider, with the tires out of the body. Here in Brazil there is no hobbyshop.
Another nice video, Matteo. 👍😊 The suspension articulation looks very scale accurate, especially for such a tiny truck. Have you made any modifications?
It was a bit difficult, you have to take off the body, to do this you have to remove some tiny screws and parts, not easy to put them back later! Needs a little patience! 😊
Hi mat. Ik this isnt the video but what receiver+ transmitter, servo, and battery did u use for your tamiya cc01 isuzu. I just got it and im not sure on what electronics
with something like this you have everything you need for a good price: www.carson-modelsport.com/carson_de/kategorien/carson-zubehoer/fernsteueranlagen/rc-reflex-pro-3-elektro-set-500500091-de.html
The driver doesn't seem to know the difference between crossing a stream and following a stream. lol Nonetheless a great truck and nice footage. Looks really scale.
I had to remove the body and open it up. It is a bit tricky. Had to remove some parts with the very thin screws, but finally it worked. Did not remove them completely, just a little to make it possible to insert the driver.
Matteo is a very dutiful driver, even in the wilderness he uses the turn signals! 😂😂
Vorbildlich ! 😂😂😂
👏
Funny
That is one good looking scale truck, nice run.
Now that's what I call an Adventure!👍🏾
🙏👍
Happy Holidays☃️😁👍
Same to you!
Nice Matteo!
You must have the camper special suspension, regular 1/2 ton Chevy p/u would never handle such a load😎
Happy holidays!
Looks like it is the camper edition Chevy
Nice, always like the scale, story based RC vids. Subscribing.
your productions are always inspiring! Thanks👍👍👍
Thanks a lot! I appreciate that! 🙏😊
I like how the wood magically was loaded :)
You need a better radio too !
We miss you, dude
Very nice! The good thing is that the bed is empty like in a real truck 💪🚀🔥 Chevy looks great🙂👍
Q bonita camioneta. Estoy próximo a comprarme uno
Nice video and his work too.
It's cutie long and narrow style , the run is also good.
Thanks and happy new year to Japan! 👍😊
Really good looking truck 👍
Man that good looking little truck, I may have to get one of these! Great video and I am glad he didn't get stuck on the big sand hill, that may have been hard for him to get out of!! Merry Christmas 🎄
That looks awesome!! Merry Christmas!
Happy new year Steve! 😊
Beautiful video Matteo! My son's name is also Matteo
Very nice cutie! I have the Toyota FJ Cruiser and I love it! Merry xmas!
vraiment super bien comme vidéos comme d'habitude, un petit bonjours du centre de la France 👏👏👌
Merci beaucoup! 👍😊
Hallo Matteo ! einfach mal DANKE für die super tollen Video's von Dir !! Hilft so manchem zur Kaufentscheidung ... Habe mich nun auch entschieden , für ein weiteres Projekt ;-)
danke nochmals und e Guts Nöis !!
Grüessli Thomy
Hoi Thomy, vielen Dank! Solche Kommentare freuen mich und motivieren mich sehr! Der au alles Gueti im neue Johr! 👍😊
Could you recommend a longer steering shaft and longer rear axle shaft for this Red FMS K10 (or Glacier)? Maybe a full compatible axle set. I want to make the car wider, with the tires out of the body. Here in Brazil there is no hobbyshop.
Sorry, I can't.
This was great!! Very nice ride along.
Thanks! Glad you enjoyed it! 👍😊
Great video, FMS did a great job on this one.
Thanks! Yes, they did! 😊👍
Das ist ja wieder einmal ein schönes Video, tolle Aufnahmen und das Auto ist klasse. Vielen Dank
Immer wieder gerne! Danke fürs schöne Feedback!
Hi Matteo ,
Mal wieder ein sehr schönes Video von dir. Mach weiter so und frohe 🎄 🎅🏻
Gruß Mark
Another nice video, Matteo. 👍😊 The suspension articulation looks very scale accurate, especially for such a tiny truck. Have you made any modifications?
Thanks! No, everything is stock. 👍😊
Very nice !! But it's a pity that there are no headlights and turn signals at the rear !! 😀
Yes, We agree!
@@Matteomeier Perhaps it will come later 😀
Rc mal nützlich!
Mit soviel Holz kommt man gut durch den Winter.
Danke! 👍🔥🔥🔥🔥🔥🔥🔥🔥😂
nice and cool
Ur stuff is awesome,
Glad you like it! 👍
What a lovely video!
Thanks Del! 👍😊
Nice video merry Xmas
awesome, i have the fms toyota land cruiser, how did you put that driver inside?
It was a bit difficult, you have to take off the body, to do this you have to remove some tiny screws and parts, not easy to put them back later! Needs a little patience! 😊
@@Matteomeier omg, seems tricky... but ill do my best, thanks for the tip man.
Hi mat. Ik this isnt the video but what receiver+ transmitter, servo, and battery did u use for your tamiya cc01 isuzu. I just got it and im not sure on what electronics
with something like this you have everything you need for a good price: www.carson-modelsport.com/carson_de/kategorien/carson-zubehoer/fernsteueranlagen/rc-reflex-pro-3-elektro-set-500500091-de.html
Da werden kleine Steine plötzlich groß... Aber geniales Video! Hätte auch noch Holz zum transportieren........
Danke Rolf! 👍😅
The driver doesn't seem to know the difference between crossing a stream and following a stream. lol Nonetheless a great truck and nice footage. Looks really scale.
😂 Yes, he's a novice driver... 👍
Can I drive in water or snow or any kind of weather? Would love if u can drive it in water and make a vid about it
You can see it in this video, I drive in a bit water. I would not recommend to go deeper.
Hi !
Nice vidéo👍
Where you find the pilote on this rc?
Thanks !
It's from Schleich, a German toy manufacturer. www.schleich-s.com/en/US/
Any plans to review the Vanquish Phoenix, Matteo?
Yes, I ordered it two months ago but still waiting for it....
@@Matteomeier same here. Ordered mine on Nov 29th....
How did you make 18 scale size pieces of wood and those hooks how did you get those to be 1/18 scale?
I have searched for it
Dope! I love it!! What are the scale dimensions on the figure inside?
The figure is about 1:18 scale. It's from Schleich www.schleich-s.com/en/GB/
Nice video, its a smart looking truck, but would be even nicer in 1/10th
I agree! 😅
Very nice video
🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
Thanks! 🙏
Is this triple A battery like kyosho 4x4 4runner or dangerous 2 s lipo with bad charger included?
I thought the doors didn’t open on this one how’d yah get the driver in? I wanna do the same
I had to remove the body and open it up. It is a bit tricky. Had to remove some parts with the very thin screws, but finally it worked. Did not remove them completely, just a little to make it possible to insert the driver.
Amazing bro 😍😍😍
Thank you so much 😀
FMS Rule De Skies!
Ahahhhahahahaha!
Live Axels looks legit,
Or is it Matts Trickory
❤ likeeeee
Is it waterproof?
I would say only water resistant.
Cool video, you have to subscribe right away
👍 Thanks!
404. Big Like