Thanks for watching! Things will start getting back to normal the second week of October. I know there have been fewer, less elaborate videos, and that's because we have three really big things going on in the background. I can't wait to show you!
The RAM phone hoder comes with a ball mount, made from metal, that locks with the handlebars of the bicycle or a motorcycle. I use it on my bike and my motorbike and is amazing. The manufacturer says that it should hold the phone to up to 250km/h with the extra rubber spider. I took my phone holder on my trail bike and up to 90km/h with my motorbike and it held flawlesly. Those zipties were doomed from first second.
RAM mounts are the best. I've crashed on a 450lb motorcycle after getting slammed by a pick up truck in the freeway at 60mph, flipped in the air, slid for a decent amount, and the phone stayed on the mount without even budging (and obviously no damage to the phone). I've crashed few more times in both dirt and street and the phone always stays attached.
@@dinosoarskill17 you rode about 35-40 miles going at least 115mph? That's pretty impressive ... No way could I get away with that in NJ ... Not many places you can even do that here without passing 4-5 cop cars ... Where do you ride?
I could actually use a couple gripsters and keep them in my SUV. I'm always leaning my bikes up against the car by the handlebars and they always seem to wander and my bike falls. The magnet could keep it in place against the metal vehicle panels!
Now make pants out of that material!! If a car comes within two feet of you you'll be glued to the car lol unless it's carbun fibber. Walking through a hardware store and those pants be trying to steal everything.
If you're referring to the documentary, it was indefinitely postponed because of the pandemic. A lot of other garages were being featured, and so we'll need to wait around! Our shop will probably look a lot different by the time it comes out.
I actually do see a valid application for the gripster. Owning a mountain bike in an apartment means it just hangs out in the living room propped up against the wall. The more I did this I started to realize dirt smudges on the wall. That thing would keep my wall clean and looks better than the rag I throw over the grip currently. 🤷🏾♂️👍
seth at the begining of this year: im becoming more smart and taking less risks cos im getting older also seth: is runnung with an incredibly hot peice of metal
One of the main reasons I like seths reviews is that he tells us his honest review unlike other people they just say good things about the product because they want people to buy it
@@bustoms dude you realize tv shows buy people out and make them change for the worse, they can change there whole attitude and restrict certin things they can say, or make them show off tons of sponsors and cram ads down our throats, we don't want that we want this Seth so I'm not being selfish I'm being honest
How about you share love with each other, without stupid materialism bullshit that leaves you only with expectations? Share a couple of shots of clear water, fruits from aunties garden and a few smiles packed in honesty? And all those pixelles eyed photos you all uploud to your brain memory, patiently waiting for old age to delete.
There's supposed to be a rubber thing around the handle-bar on the X-grip! If it hold my phone on my motorcycle without moving in 200km/h on a naked sportbike, it should work on a bicycle - correctly installed that is!
I would v.upset if someone trialled my product but missed an entire part out... Sure, we might not read the instructions sometimes... But leaving out a part of the product seems unfair to me.
Also there should be a rubber strap that you pull over the corners of your phone to hold it in place. I had one of these ram mounts on my klr650 and went offroading often, my phone never once fell out. Ram mounts are great...given installed and used right..
Saudade By your logic, every scientist on the planet is a Karen, because they want a fair and consistent test. I guess the name Karen has basically lost it's original meaning now.
Joe Callister id be upset if I bought a phone mount that required me to zip tie around a random rubber strip as the intended mounting method. That's janky diy level product design and not at all what anyone should expect from an off the shelf product from a serious company.
@Croomrider97 absolutely. I use the one reviewed here on a motorcycle and have never pitched a phone. Skip the zip ties. They have u-shaped metal shackle bolts that will not loosen. For as much as I like them it’s a bit much for a MTB. I’d probably go Quadlock before ever using a Ram on MTB.
@@jeremyprovonsil7886 you're comparing apples to oranges bruh. Do you do jumps with motorcycles?? This is a mountain bike channel, and it reviews everything in its domain, nobody cares how well it works for a different application because it's failure in this one is apparent
@Unstable Sociopath {4:20} I'm just playing but seriously. When it's 90F and the UV is 10 you want as much water as you can carry on an afternoon. I would never discourage anyone from drinking more water.
Man, I got back to riding because of your videos 5 years ago. Watching your channel feels like hanging out with an old buddy. PS; you should do a voiceover like in the good old days
Not to be mean but I think it was a bad pr decision to change it to been peak. If you see his view count before his changed his name it averages over a million. After he changed his name the videos views are averaging under 500k
I remember subcribing to you 5 years ago when i saw 7 bike tricks video and you had like 50000 subscribers and i can't believe this chanel has grown this much since... Love your work just keep going
He posted a video saying the channels were merging. He also has been on vacation with his wife. It makes sense to me that he did a bpe style vid this week. I am certain he will do the editing and voiceovers for the next build and ride videos.
i quite like the gripster. Makes sense having it on when you're storing the bike in the house and don't want to stain your walls when you lean your bike against the wall. would totally get it.
The Squatch is pretty cool. I've always used my blanket that I use on the tailgate just hung over the two doors open. The magnets and the bag are a nice touch....especially since I finally broke down and bought a real tailgate pad.
@@mag-padmagnetictoolholder3284 The very strong *magnet* , won't affect the *magnetic* storage in your phone, gps, or bike computer? Yer right...................
@@schwuzi Thank you for making me look this up. Flash mem *is* affected by magnetic fields/magnets, but is "resistant" to static magnetic fields. IE: The damage is done by induced current rather than (de)magatising something that should(n't) be. Anyway, a sufficiently strong magnetic field will wreck anything electronic. Remember the force is ElectroMagnetism.
The magnetic pad is genius. I could use that for everything. From working on motorcycle, to holding bits for carving, holding a few nails or screws when hanging or tacking pictures, building birdhouse etc. Just looked they are like 50 bucks. No lower priced Chinese knock offs or imitators. If they cut there price in half and were more aggressive with there marketing, everyone would have one.
@@rupedog I found some fabric that was the same material and same dimensions on Amazon plus a couple 1in magnets and a cheap travel bag and it came out as $39.97 before shipping.
@@Russell.Grayson I use a large, thin microfiber sports towel (paid less than €10 for it and I often have one of those in my car anyway) plus two magnets (about €3 for both).
First Last I think trail heads is where it kinda shines. The magnet would work well in that situation. Just make sure it’s clean before sticking to your cars paint haha
RAM mount makes mounts that bolt onto your motorcycle handlebars that would work better. They also come with rubber bands for extra securement. I use that for my bicycle as well
Hey I actually need something like the gripster Am leaning my bike against the wall of my Appartement or basement cause it is the easiest way to store it The right grip already is kinda messed up Was thinking about taping a piece of foam to the wall or something like that but I’m probably gonna buy a gripster now Just to let you know I dig that invention and will also use it
Ram mounts are amazing!!! I own multiple motorcycle from dirt bike, street and even dual sport. I habe never felt a more secure phone mount especially for the galaxy plus series.
I’ve been watching your channel for the last 3ish years and never really have made comment. But, it just hit me... You’re DOUG FUNNY from that old Disney/Nickelodeon show DOUG. How you present yourself and your voice is spot on. Makes me enjoy your channel even more. FYI, this is a compliment from me and nothing else.
I've had the "Squatchco" since 2019. Really like the product.... However, BEWARE that if the "🧲" hits the ground accidently it will pick up pebbles and other debris. Then when you go put it on your car it WILL scratch it! Also, the 🧲 are not super strong so they will move or come off with some wind. 👀 Another option to look at is the "Orangemud" towel. Love this product. Very multi functional. ✌
Nope, US ounces are different than imperial ounces. Our ounces are based on the metric system. Quarts and liters are roughly equivalent. a US Fluid Ounce is about 1/32 of a liter, or 29.5735 ml exactly. Now stop complaining about it. It's freaking simple to learn. Don't let this powers of 10 nonsense dull your brain.
Klaas US Customary is the superior system for daily life. Sorry if that bothers you. I mean, what kind of cultural relativist comes to another persons home and demands they accommodate your language and habits?
Next week on Berm Peak: "Welcome back to Berm Peak! Where today we're gonna be doing something a little different. But sort of the same? I have here 200 cows and we're gonna brand every single one of them with the Berm Peak branding iron. And.... I'm gonna do it while riding my mountain bike!"
I've been using The imprint grips for years now and I really Love them, The only downside to them is that you have to be carefull about putting your bike in the sun. When I go camping in France, I have to put my bike in my tent Because the hot sun will make the grips so hot that They will go back to their original form, like When you shape them, and Then you have to do the whole molding process again.
![Ice On My Teeth - ATEEZ エイティーズ 에이티즈 [Music Bank] | KBS WORLD TV 241115](http://i.ytimg.com/vi/c-n92OgbbwA/mqdefault.jpg)
Thanks for watching! Things will start getting back to normal the second week of October. I know there have been fewer, less elaborate videos, and that's because we have three really big things going on in the background. I can't wait to show you!
What happened to the express channel it seems to be kinda dead?
Berm Peak still great vids hope the other stuff is good stuff
Baby bike hacks?!?!?!?!
are you going to review the Gopro hero 9?
Seth is gunna have a baby Seth confirmed
Mom: Don’t run with scissors
Seth:
*runs with a human melting stick*
I was thinking that.....
@@thomasmcfadden7013 You made it, didn't you?
Hahaha
Why not just take the plank of wood off and take it to the fire ring?
I would burn that mark on my wifes bum!
The RAM phone hoder comes with a ball mount, made from metal, that locks with the handlebars of the bicycle or a motorcycle. I use it on my bike and my motorbike and is amazing. The manufacturer says that it should hold the phone to up to 250km/h with the extra rubber spider. I took my phone holder on my trail bike and up to 90km/h with my motorbike and it held flawlesly. Those zipties were doomed from first second.
RAM let my phone fly off the bike at 220km/h on my MT07
Wouldnt use it when driving faster than 190km/h
I have a 3D printed quadlock style mount on my CBR and I rode doing 115-170mph for about 15 minutes and it held up.
RAM mounts are the best. I've crashed on a 450lb motorcycle after getting slammed by a pick up truck in the freeway at 60mph, flipped in the air, slid for a decent amount, and the phone stayed on the mount without even budging (and obviously no damage to the phone). I've crashed few more times in both dirt and street and the phone always stays attached.
Has to be flawless though, cause your $900 phone breaks just once and it's useless ... I have it on my Yamaha. It's great.
@@dinosoarskill17 you rode about 35-40 miles going at least 115mph? That's pretty impressive ... No way could I get away with that in NJ ... Not many places you can even do that here without passing 4-5 cop cars ... Where do you ride?
Seth has been an inspiration to me, he got me into mountain biking and whenever someone asks about it, I always suggest Seth's channel
Seth got me into creating a YT channel
same
Kind of the same here
Same man😢
BACKYARD MTB, aah the shameless promotion
The Mag Pad was the best product and probably the only one I’d buy
James Adventures and Bike Not for 49 dollars. You could put any magnet in your pocket for the same effect.
Clearly you didn’t see the end with the branding iron...
cheap shower curtain with strong magnets from the dollar store
Did any one else realize that the gripster was supposed to be a magnet?
@@notskeppy638 My guess is it can be a magnet or a grippy rubber thing. Still not sure how well it would work tho
the pocket magnet is so cool and seeing a review that is better then expected is always great
that thing can be used by so many professions . im a chef and i want 3 lol
Welcome to another episode of Berm Peak, where Seth now slaps tools against his thigh
@@anythinganeverythingclips who says "I'm underrated" 💀
I’m convinced that the product is fake and their just sticking to his balls of steel
@@gavinwinram7811 lmao thats another way to put it lol
Hahahahha
@@anythinganeverythingclips just stop advertising your channel in comment sections, noone will actually care
I could actually use a couple gripsters and keep them in my SUV. I'm always leaning my bikes up against the car by the handlebars and they always seem to wander and my bike falls. The magnet could keep it in place against the metal vehicle panels!
Seth, we need an update on Lisa, and how she has progressed!
Most likely called it quits and got out of the sport 🤷♂️
Thats a very old series but i think shes doing well and probably hitting jumps by now
@@adamharith911 yeah thats why we need that
@Supfingo 95 a girl who seth introduced into montainbiking
That magnet blew me away!!! Who knew such a small magnet could hold so much
Thanks Nathan!
Also the fact that it was so bendable was crazy!
I’d ruin pants for sure with a dirty tool but I love the concept.
Mag-Pad Magnetic Tool Holder very cool little invention. I’ll pick some of them up for sure.
Now make pants out of that material!!
If a car comes within two feet of you you'll be glued to the car lol unless it's carbun fibber.
Walking through a hardware store and those pants be trying to steal everything.
Next time Seth uploads, we’re going to see a bunch of tools attached to the outside of his pocket😂
LOL
That or he'll be stuck up against a car, crotch first! 😂😂
Everything including himself will have a berm peak brand mark
On point ahha he loves it ahha
i would cry of laughter if this happened
Dang, that pocket magnet pad costs more than I expected. I would've instantly bought one at $25 or less
When is the Netflix show coming
Haaken Dohse something a Little different but kinda the same the Movie
If you're referring to the documentary, it was indefinitely postponed because of the pandemic. A lot of other garages were being featured, and so we'll need to wait around! Our shop will probably look a lot different by the time it comes out.
Yes
Reality tv
Berm Peak so a documentary was planned all along?!?! I have been waiting for sooooooo long
9:43 that scene in LOTR the two towers, if you know you know
I actually do see a valid application for the gripster. Owning a mountain bike in an apartment means it just hangs out in the living room propped up against the wall. The more I did this I started to realize dirt smudges on the wall. That thing would keep my wall clean and looks better than the rag I throw over the grip currently. 🤷🏾♂️👍
That is actually very fair
seth at the begining of this year: im becoming more smart and taking less risks cos im getting older
also seth: is runnung with an incredibly hot peice of metal
I was looking for a comment about this, it’s almost as bad as running with scissors in elementary school
At least the magnet pad wasn't in his pocket at the same time
aaron lmao true
5:17 Sounds like the Sam Pilgrim American skater guy. 😂 “That’s craaazy maaan!” 😂
YES SOO GOOD
I always thought it was an Australian impersonation.
Chemistry, Films, and More Epic, this is epic!
Was looking forward to this comment!
One of the main reasons I like seths reviews is that he tells us his honest review unlike other people they just say good things about the product because they want people to buy it
yeah cause he wasnt sponsered by any
Seth Don't ever sell out or let someone make this a tv show, I don't want this channel to change at all
Don't be selfish he can do whatever he wants
@@anythinganeverythingclips lmao your comment is hella cringe and you're not even close to 5k anyways
@@anythinganeverythingclips Stop.
it has changed a lot over the years though
@@bustoms dude you realize tv shows buy people out and make them change for the worse, they can change there whole attitude and restrict certin things they can say, or make them show off tons of sponsors and cram ads down our throats, we don't want that we want this Seth so I'm not being selfish I'm being honest
That magnet thingy is actually really nice, I can'r wait to see Seth walking around the shop with a bunch of levers hanging from his trousers
This is what I like about this guy. Company send their product to review and you don't sugarcoat them. Nice!
This looks like what a mountain biker would get for Christmas from his family who has no idea what to get him. 🤣
How about you share love with each other, without stupid materialism bullshit that leaves you only with expectations?
Share a couple of shots of clear water, fruits from aunties garden and a few smiles packed in honesty?
And all those pixelles eyed photos you all uploud to your brain memory, patiently waiting for old age to delete.
@@FirefighterBobby ....woah just take it easy man
@@SWFBrickbox Pay me to stop!
@@FirefighterBobby 10 bucks
@@aarongetkin7865 No, I only want Yannis, Middleton & DiVincenzio... you keep the rest.
Seth the Piece of rubber that was included with the ram mount was for extra grip for the zip ties ??
Yeah, tbh he kinda failed the ram mount installation.
I have the ram bicycle mount on my motorcycle and love it. But yea literally just needs the little rubber piece and it would be fine
Or any of the other million mounts that ram offers. I've got the U bolt on my motorcycle and have 0 problems with it
this is true, but that would not have stopped the mount from snapping apart.
@@calebgarcia9440 true but the mount didn't snap until after it fell down due to lack of grip for the zip ties
There's supposed to be a rubber thing around the handle-bar on the X-grip!
If it hold my phone on my motorcycle without moving in 200km/h on a naked sportbike, it should work on a bicycle - correctly installed that is!
im guessing youre the person who invented it
Bro a bike Handlebar is just a certain shape..
Mountain Bikes usually have a shrinked Handlebar in the end, which makes them slidy
Dude mtb is WAY rougher thank a sport bike.
There was no rubber pad with the one he had.
@@gooseberryjam1683 he legit mentioned it while unboxing are you kidding me 🤦♂️
The rubber was supposed to go under where the zip ties were on the phone mount. So it wouldn’t slip down the bar
Yes, at 2:32 so, he needs to redo this...
I would v.upset if someone trialled my product but missed an entire part out... Sure, we might not read the instructions sometimes... But leaving out a part of the product seems unfair to me.
Also there should be a rubber strap that you pull over the corners of your phone to hold it in place. I had one of these ram mounts on my klr650 and went offroading often, my phone never once fell out. Ram mounts are great...given installed and used right..
Saudade By your logic, every scientist on the planet is a Karen, because they want a fair and consistent test. I guess the name Karen has basically lost it's original meaning now.
Joe Callister id be upset if I bought a phone mount that required me to zip tie around a random rubber strip as the intended mounting method. That's janky diy level product design and not at all what anyone should expect from an off the shelf product from a serious company.
I love how he’s so honest
MJBriggs why do u have a photo of seth
Yeeguayo 47 y don’t u
MJBriggs Bruh that’s creepy
Yash Veer no Seth is our lord and we must praise him
That profile pic had me rolling
The reviews are all amazing but stuff like that subtle zoom on the spider web is the icing on the cake that makes your channel so great.
I really like this kind of content
yeah but i miss the times when it was more like him recording sound and video in the back like back at berm creak uk
Top tier RUclips content
👊
The ram mount they make for motorcycles is fantastic! One of the best I’ve seen and used.
@Croomrider97 absolutely. I use the one reviewed here on a motorcycle and have never pitched a phone. Skip the zip ties. They have u-shaped metal shackle bolts that will not loosen. For as much as I like them it’s a bit much for a MTB. I’d probably go Quadlock before ever using a Ram on MTB.
@@jeremyprovonsil7886 you're comparing apples to oranges bruh. Do you do jumps with motorcycles?? This is a mountain bike channel, and it reviews everything in its domain, nobody cares how well it works for a different application because it's failure in this one is apparent
@@obxurv maybe he does jumps you never know
Seth where u at hope everything’s all good can’t wait for the new vid
8:40
“Did we just find a good product”
“Ooh”
Mason B hahaha
"That's enough to really go out in get in trouble"
*laughs in drinking a 2 liter camelbak every ride*
Yep, 3 litre here...u need 1l per hr on average when riding
Rupert Wenn yup, if I’m going on a really long one I’ll fill my 3L bladder and easily drink it and maybe only pee once uf at all
@@rupedog That's exactly what i need on hot days, but when it's cold just 500ml do the job for an hour of more
Unstable Sociopath {4:20} i drink all day but i mean i live in in a hot arid climate with steep techy climbs
@Unstable Sociopath {4:20} I'm just playing but seriously. When it's 90F and the UV is 10 you want as much water as you can carry on an afternoon. I would never discourage anyone from drinking more water.
This channel is the reason I started mountain biking and it is the best thing to do ever
Seth: Criticizes products
People: OOO MY PRODUCT NEXT
Me: I like this
6:24 the gripster is for stopping dirty grips scuffing the walls in your house.
Lol
And scuffing off your bar tape on drops
ahhhhh alright then. Privileged garage people don't get it.
I think you can also use them to protect the cockpit when you turn it upside down, there is a gap on the sides for the handle bar...
Ooohhhh....yep, Seth should RTFM on stuff
The gripster is a very good solution for me storing multiple downhill bikes in the passage of a small British house
today we are going to a little bit different, but kinda the same
never gets old
Matures like fine wine
Its tired
We haven't had a product bin video in as while!!
Gripster is supposed to stick to like a medal fence or sompthing magnetic
“Lets run through a forest with a hot branding iron in our hands!” That is a GREAT idea.
his parents never let him run with a hot iron as a kid, so he is checking it off the list.
Wow when he's actually visibly having fun with a product like the sponge magnet thing u can tell its a good one
@@anythinganeverythingclips lmao you're getting no where with that
That pant magnet was the funniest and one of the most amazing things I've seen in a while.
4:25 Seth you missed the perfect opportunity for an explosion 💥
Seth: Alright let's start a fire.
Everyone on the west coast: 😳
@Random Stuff In Oregon lmaoooo true
The pocket magnet thing is awesome. Actually solves a problem for me. Great innovation.
*seth talking about ounces of water”
Me, a non-American: is he gonna put weed in there?
😂😂😂😂😂😂
🤣🤣🤣
The funny thing is that he measured in ounces by weight, but liquid ounces is a different measurement. For this application it worked, though.
Also, I think he mixed fluid ounces with weight ounces (a factor of 2 ish depending on what you’re measuring..?!?) 🤦🏻 come on America
Metric system is the secret of the universe
Its always a good day with seths video. Finally products, like the good ol' days
Man, I got back to riding because of your videos 5 years ago. Watching your channel feels like hanging out with an old buddy. PS; you should do a voiceover like in the good old days
Dude, you can try to change your name, but you'll always be 'seth's bike hacks' to me
A little late
@@MrFitness94 True, also don't put it in your pocket with your phone in it lmao
Not to be mean but I think it was a bad pr decision to change it to been peak. If you see his view count before his changed his name it averages over a million. After he changed his name the videos views are averaging under 500k
@@RObert-ns3nx for sure, totally agree
@Robert Schumacher I miss Seth bike hacks. We should create a petition for him to change it back
5:18 sounded just like Sam Pilgrims American friend in his videos!! 😂🤣😂
Soooo true
I remember subcribing to you 5 years ago when i saw 7 bike tricks video and you had like 50000 subscribers and i can't believe this chanel has grown this much since... Love your work just keep going
Does anyone else notice how Seth says “water”
wodder
I love it!
Hey guys, Chris fix here !
It's a reference. If you know you know
Bryan Jude Fernandez yeah “hey guys Chris fix here”
Most people on the Delmarva peninsula prounce water, wooder
Seth dosnt seem that bothered when his phone falls out at all its almost like he expected it
He put it on wrong, ram mounts are amazing
@Aaron david also missed the rubber that goes in between to fit the bars
Seth, we love when you do product videos, I get so happy when I see a new one
Smaller bottle: 10.8 ounces = 32cl
Bigger bottle: 16 ounces = 47cl
Regular bottle: 27 ounces = 80cl
There you go my friends of proper units.
In that case, your missing a zero on each for ml 😋
Rupert Wenn they’re centilitres. 1 centilitre = 10ml, so just multiply by 10. 320ml, 470ml, and 800ml.
Rip voiceover in Seth’s videos
Yep
wait why
@@benarchie6024 for the past month, he hasn't been doing a voiceover for his videos. They also seem like all of them are being edited by curtis now
Jasper Feldschuh yes the old vids were🔥
He posted a video saying the channels were merging. He also has been on vacation with his wife. It makes sense to me that he did a bpe style vid this week. I am certain he will do the editing and voiceovers for the next build and ride videos.
i quite like the gripster. Makes sense having it on when you're storing the bike in the house and don't want to stain your walls when you lean your bike against the wall. would totally get it.
its 12 30 am in australia and i got a notification and had to watch this.
Broooo same
Notice how he's not in his garage... he might be remodeling it...
could be
He was in it when he was trying the pocket magnet
@@kyleo8175 yeah but they only showed the once side. Maybe on the other side of the garage they're doing something
@@ekatho. he showed a little bit of it when he was filling his coffee maker with water for the grips
4:55
The Squatch is pretty cool. I've always used my blanket that I use on the tailgate just hung over the two doors open. The magnets and the bag are a nice touch....especially since I finally broke down and bought a real tailgate pad.
Me: puts phone in same pocket as magnet. “Well shoot”
It won't affect your credit cards or phone. Now if you have a pacemaker...that's another story...
Mag-Pad Magnetic Tool Holder 😅
@@mag-padmagnetictoolholder3284
The very strong *magnet* , won't affect the *magnetic* storage in your phone, gps, or bike computer?
Yer right...................
@@kevinshort3943 Magnetic storage? Dude phones use flash storage which is unaffected by magnets.
@@schwuzi
Thank you for making me look this up.
Flash mem *is* affected by magnetic fields/magnets, but is "resistant" to static magnetic fields.
IE: The damage is done by induced current rather than (de)magatising something that should(n't) be.
Anyway, a sufficiently strong magnetic field will wreck anything electronic.
Remember the force is ElectroMagnetism.
I finally figured out why Seths voice sounds familiar. He sounds similar to the Wonder Years narrator.
The magnetic pad is genius. I could use that for everything. From working on motorcycle, to holding bits for carving, holding a few nails or screws when hanging or tacking pictures, building birdhouse etc.
Just looked they are like 50 bucks. No lower priced Chinese knock offs or imitators. If they cut there price in half and were more aggressive with there marketing, everyone would have one.
The squatch screen would be perfect for my Honda Element
One of the best most practical vehicles!! Shame they quit making them!
Just get some material and a couple of magnets....not a product u need to buy pre made....
@@rupedog I found some fabric that was the same material and same dimensions on Amazon plus a couple 1in magnets and a cheap travel bag and it came out as $39.97 before shipping.
@@Russell.Grayson I use a large, thin microfiber sports towel (paid less than €10 for it and I often have one of those in my car anyway) plus two magnets (about €3 for both).
First product: So many waterbottles i have dropped and not been able to find, this is a BIG nope!
Is your bottle on the underside of your downtube
@@Fred_the_1996 nope, upper
You mean wutor
Mag pads are solid for tools. I use those on the inside lid of my tool boxes. I love them. Great product!
I could seriously use that “gripster” my bar ends are anodized metal and completely scratched up from leaning up against walls.
They would also be nice for leaning my bike against my truck without scratching or sliding.
First Last I think trail heads is where it kinda shines. The magnet would work well in that situation. Just make sure it’s clean before sticking to your cars paint haha
Bar ends...like bar horns...or end plugs u mean? If plugs, just by plastic.ones
@@rupedog The ODI grips have hard ends that will mess up paint even if they are platic.
@@rupedog They are Chromag Palmskin grips, Totally weird design.
5:16 hahaha, sounds exactly like Sam Pilgrim california neighbor
Haha so true!!!
„A little escape from this crazy world“ hell yeah, thanks for that Seth! You are great at that
7:01 woah seth 😂
Bro Fr I thought everyone was just gonna ignore that that shit was sus
😂
Oh yeah, finally ive been waiting for this a long time!
Seth, you need to do your own van build and go on a co trip with sampler. That would be dope footage.
asioe kiou he made a video about that
5:58 this would actually be useful if you live in an apartment or are renting when you don’t want to leave scuffs on the walls
This video is the perfect length for in between my zoom meetings
Andrew Albert I’m in between history and ELA
Same. I’m between Ap Ab calc and Ap Chem
Deceive ‘Till They Believe Sounds hard
Seth, I was surfing your RUclips channel. I enjoyed this episode. You had me laughing so hard. Thanks for your videos.
I love you’re channel!
And you’ve been a great inspiration to me. Soon I’ll be turning 13 and ready to have fun and ride hard.
POV: your here wondering why he has not posted
Yes
Ye lmao
Yessss!!
House.
RAM mount makes mounts that bolt onto your motorcycle handlebars that would work better. They also come with rubber bands for extra securement. I use that for my bicycle as well
Just introduced my little brother who’s one and a half he really likes the jumping lol
Cap
I was so worried that he was going to brand Oscar with the branding iron
Come here little buddy
for a moment I was thinking you were going to brand yourself with it Seth. awesome video. yeah, the mag pad looks like it's the best here.
Or brand the doggie.
Hey I actually need something like the gripster
Am leaning my bike against the wall of my Appartement or basement cause it is the easiest way to store it
The right grip already is kinda messed up
Was thinking about taping a piece of foam to the wall or something like that but I’m probably gonna buy a gripster now
Just to let you know I dig that invention and will also use it
Check if there are better solutions for a similar price first if you're gonna be buying something anyway
"BOOM BOOM BOOM", "I can't even criticize this project"😂😂😂😂😂
Seth! I loved this video, can you make part 2? I want more like this :)
only the OG's will remember when Bearm Peak was his second channel
.
@Cruze Gardipy only ogs will remember when he wasn't sponsored by diamondback and cursed in a lot of his videos.
Ram mounts are amazing!!! I own multiple motorcycle from dirt bike, street and even dual sport. I habe never felt a more secure phone mount especially for the galaxy plus series.
I’ve been watching your channel for the last 3ish years and never really have made comment. But, it just hit me... You’re DOUG FUNNY from that old Disney/Nickelodeon show DOUG. How you present yourself and your voice is spot on. Makes me enjoy your channel even more. FYI, this is a compliment from me and nothing else.
The sliding water bottle is so frickin sick
After being told all through childhood not to run with scissors, Seth decides to run carrying a red hot branding iron 😂👍
I've had the "Squatchco" since 2019. Really like the product.... However, BEWARE that if the "🧲" hits the ground accidently it will pick up pebbles and other debris. Then when you go put it on your car it WILL scratch it! Also, the 🧲 are not super strong so they will move or come off with some wind. 👀 Another option to look at is the "Orangemud" towel. Love this product. Very multi functional. ✌
Hey Seth just making sure you’re still alive man it’s been almost a week
He hurt himself
@@lifeofseanandharley4781 good job captain obvious
Petition to make a "Kind of the Same" T-Shirt
Sign below
Yers
The magnet that goes in your pocket is absolutely GENIUS
Ah, yes. The imperial measuring system, we meet again!
Nope, US ounces are different than imperial ounces. Our ounces are based on the metric system. Quarts and liters are roughly equivalent. a US Fluid Ounce is about 1/32 of a liter, or 29.5735 ml exactly. Now stop complaining about it. It's freaking simple to learn. Don't let this powers of 10 nonsense dull your brain.
@@Mostlyharmless1985 we got an American fanboy🤡
Klaas US Customary is the superior system for daily life. Sorry if that bothers you. I mean, what kind of cultural relativist comes to another persons home and demands they accommodate your language and habits?
@@Mostlyharmless1985 "US Customary is the superior system for daily life" HAHAHAHAHAHAHAHAHAHAHAHHAHAHAHA Oh man best joke today :D
@@Janduin45 Your name has dots in it. I don't think you are the judge for things being easy.
Next week on Berm Peak:
"Welcome back to Berm Peak! Where today we're gonna be doing something a little different. But sort of the same? I have here 200 cows and we're gonna brand every single one of them with the Berm Peak branding iron. And.... I'm gonna do it while riding my mountain bike!"
that or having that as a season pass to berm peak if he was psychotic😂
You actually made me laugh out loud. Good show. Seeing Seth doing that would really be something.
I've had great luck with Delta phone mounts. They mount where the stem cap is. Super sturdy.
8:35 what about the window 😂
It’s made so that they can’t see tour balls
Do you think my Carrera vengeance would be good for proper mountain biking like u do
Yes but it won’t last long, if you ride hard like Seth and me you won’t be able to go as fast
I've been using The imprint grips for years now and I really Love them, The only downside to them is that you have to be carefull about putting your bike in the sun. When I go camping in France, I have to put my bike in my tent Because the hot sun will make the grips so hot that They will go back to their original form, like When you shape them, and Then you have to do the whole molding process again.
This is worth skipping class for
I did the same thing
Yep
Worth it
Don’t look at me totally not watching during online class well I am but I finished my assignment and my class is doing nothing lol