How to Replace Alternator 2007-2012 Nissan Altima
HTML-код
- Опубликовано: 12 сен 2024
- Buy Now!
New Alternator from 1AAuto.com 1aau.to/ia/1AEA...
This video shows you how to install a new alternator from TRQ on your 2007-2012 Nissan Altima. The alternator in your vehicle powers the battery and electrical system while the engine is running. If your alternator is failing, you may wind up with a constantly draining battery.
This process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima
Tools you will need:
• 10mm Wrench 1aau.to/oWy/1AX...
• 10mm Socket 1aau.to/obcR/1A...
• 12mm Socket 1aau.to/obwL/1A...
• 13mm Socket 1aau.to/obwL/1A...
• 14mm Socket 1aau.to/obwL/1A...
• Trim Tool Set 1aau.to/oac8/1A...
• Ratchet 1aau.to/obCD/1A...
• Torque Wrench 1aau.to/oaGh/1A...
• Gloves 1aau.to/oaas/1A...
• Safety Glasses 1aau.to/o3E/1AX...
• 5mm Hex Socket
• 5mm Hex Wrench
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
The most important part is the belt tensioner. SmH
What kind of informative video is this? Like everyone else has said, how could you ignore the step of how to remove the serpentine belt?
Decent video except not properly showing belt tensioner/removal/replacement of serpentine belt. It does not happen that easily!
I also prefer getting the OEM alternator rebuilt at a local shop if possible, as a far better alternative to buying an unknown quality rebuilt.
Correction: You can take the alternator off yourself easily by removing top bolt and rotating down. the belt will come off without damage. But putting the belt back on is more difficult. That requires one person below with tensioner and belt already on top, or 2 better yet people: One below on tensioner and one above making sure the belt is on correctly. Either way, someone has to be on the tensioner below (14mm box wrench only, sockets won't fit its too thin). The longer the wrench the better, you will have to apply pressure from below and its tight. I purchased a very thin Craftsman tensioner tool (fits sockets) won't fit on tensioner. The frame to tensioner bolt access on pulley, its very narrow, will only fit an 14mm open end wrench or preferably a box wrench! Again you won't be able to get a socket on this plus a wrench into the socket!
This is helpful. Thanks! Just replaced my alternator on my Altima. Removal is the hardest part, belt is not too bad, just annoying.
Best how to do video there is only suggestion I would add is showing how to release the tension from the tensioner but that’s super easy to locate and can also easily RUclips another video of where to locate the tensioner and how to release the tension other than that 10/10 video 👍🏽
Any tips of getting that alternator belt out fast, should I just loosen the tensioner ?
Love the video what's the easiest way to remove the belt off the alternator
How come you don’t have a video for 3.5 alternator replacement?????
how do you loosen the belt, is it a spring tentioner or bolt one? tttrying to help my sister while at work
Awesome video! Didn't take as long as I thought it would.
thanks for skipping the entire 1st part were you have to loosen the tensioner to get the belt off dmb asssss
He had problems with the belt that was probably embarrassing so he didn’t upload it. I’m going through the same thing right now.
The video was helpful but we all missed the part about replacing the belt .
So there is an idler as in all vehicles today that is in a really tight place below just to the left almost center a 14 mil bolt
Note it is in a very tight spot for guys with big hands
Thanks for the video
+Ritchie Hall Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ
So do you need to use a jack stand for this change out?
How do you take the tension off belt
Thanks for this video. Help me out a lot.
+Silverado Scott Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ
The mechanic changed the alternator for me and the next day AC doesn’t work ? Do you have any suggestions what to check ?
Yea no belt remover coverage made it look easy😂
Bruh why u didnt show the belt temsiomer smmh
Why does it look like my alternator is at about a 5 degree angle. I haven't taken off old one yet.
Why don't people post motor size on the title or anywhere
Bro thanks for helping 😊me!!
The belt tension? Wow car won't start because belt 😂
Is 1k usd for this repair accurate? I am curious how much you should of charged for this specific job. Perhaps they charged me an extra 500$ because of the rust.
Interesting how this was a 10 minute video and these mechanics you take your car tell you to leave it over night. Tsk tsk tsk 🙂↔️
Great video
Will this work for the 3.5 liter engine as well?
I was going to ask no belt tensioner. But I see in the comments that people are already asking about this. SMH
Tnx
How much cost alternator cost alternator for 2017nissan pathfinder
+@user-iu6qo7ni8l Please review part number ALA90119 to ensure this is the alternator you need.
Did even tear ur gloves I bussing gloves left in right wat type gloves u got