What kind of connectors does it use from the manufacturer for the hose? Is it a proprietary connection system, or is it a standard 1/4” quick connect fitting?
It's actually just a standard M22 threaded connection. So any pressure washer hose will work and if you want a quick connect just get an M22 to 1/4 inch quick connect.
It was a while ago but I'm pretty sure it's all just standard pressure washer fittings. M22 and 3/8" quick connect. Stuff you can get right at Home Depot.
@@luxurycardetailingthehamptons awesome thank you! Now I'm trying to figure out if I want to quick connect awesll from my water tank to the kranzle so I can just pop it off whenever I need to unpack my truck. Thanks for your response!
I run two Honda eu2200i generators hooked together and there is no struggle whatsoever on startup. I even leave them both on eco mode, so they're revved down. There's no issue when the Kranzle kicks on. Although I can't guarantee it, I don't see you having a problem with a 3500 watt generator. I ran it on a 15amp gfci circuits now a few times. I used to have a problem with my Ryobi with 15amp circuits. The Kranzle is no problem at all.
@@luxurycardetailingthehamptons the price now is 1,145. Price marked up. Have you tested a 1.1mm orifice on your foam canon?. Your foam canon has a pre installed 1.25mm. The amp draw on a 1.25mm is 11.4 amps which Matt tested it from OG. Could you test and show us the amp draw usiing a 1.1mm orifice on a foam canon with your kranzle 1622? . Thanks.
They are lovely and quiet. Mine is the UK spec HD K10 122 TS model. Totally loving it!
Are there any disadvantages to having the TS mechanically? Constant on/off type issues?
I haven't had any issues with the TS function so far.
Just got my 1322ts from OG LOVE IT
Nice!
Kranzle pressure washer ..pric.
Hey, how come ur using a 1.7mm orfice in the foam cannon? They usually come with 1.25mm nozzles
1.25 orfices*
What kind of connectors does it use from the manufacturer for the hose? Is it a proprietary connection system, or is it a standard 1/4” quick connect fitting?
It's actually just a standard M22 threaded connection. So any pressure washer hose will work and if you want a quick connect just get an M22 to 1/4 inch quick connect.
Nice! I just recieved my 1622ts. How did you get your mtm gun to mount onto the factory kranzle hose?
It was a while ago but I'm pretty sure it's all just standard pressure washer fittings. M22 and 3/8" quick connect. Stuff you can get right at Home Depot.
@@luxurycardetailingthehamptons awesome thank you! Now I'm trying to figure out if I want to quick connect awesll from my water tank to the kranzle so I can just pop it off whenever I need to unpack my truck. Thanks for your response!
Do you think it would have issues with a 3500 w inverter generator?
I run two Honda eu2200i generators hooked together and there is no struggle whatsoever on startup. I even leave them both on eco mode, so they're revved down. There's no issue when the Kranzle kicks on. Although I can't guarantee it, I don't see you having a problem with a 3500 watt generator. I ran it on a 15amp gfci circuits now a few times. I used to have a problem with my Ryobi with 15amp circuits. The Kranzle is no problem at all.
Hi, the k1622 is like a 7/122 or 10/122 in europe?
edit. When you say that is so quiet, then i thing it is a 7/122? how much rpm, 1400?
Not really familiar with the european models, but the specs are 1600 psi, 1.7 gpm, 1700 rpm, 1.6 kW, 110 volts and 14 amps.
Going on nozzle colour, a 7/122. The motor will be running on 60Hz hence the higher speed.
7/122 runs 1.85gpm on 1400rpm
does it work on just one of those generators?
Not consistently. It way over-revs just one EU2200 and sometimes it just trips the breaker and doesn't work at all
is conectec on water tank
So what’s the difference between the 1622 and the 1322?
The 1622 is 1600 psi @ 1.7 gpm and the 1322 is 1300 psi @ 2.1 gpm.
2020 1622 also has total start/stop. also 1622 requires 15 amps while the 1322 requires 20.
Where did you purchase this from?? And how much
I got it from Obsessed Garage and I believe it was $990+tax shipping included.
@@luxurycardetailingthehamptons the price now is 1,145. Price marked up. Have you tested a 1.1mm orifice on your foam canon?. Your foam canon has a pre installed 1.25mm. The amp draw on a 1.25mm is 11.4 amps which Matt tested it from OG. Could you test and show us the amp draw usiing a 1.1mm orifice on a foam canon with your kranzle 1622? . Thanks.
Nice
2100 watts sthil pressure washer .reqrd to gernetar pls hlep me