Yours is without a doubt THE BEST review of this radio on RUclips. I had the question in my head if I can set the throttle to auto center for GPS Heli's without opening the radio and you are the only person that answers that question. Good job, I have been watching your reviews for a while and I am a new subscriber, thank you for your content!
Thanks buddy and welcome to my Channel. I do my best to provide good info to people and of course, if anything i did not cover in this review or you have questions, feel free to contact me.
@@alishanmao No, that's the point, you covered EVERYTHING! After watching this, I decided to get this exact model, I was not sure if I should get the 4 in 1 or the ELRS and this video helped me to make the decision, the 4 in 1! I can always get the ELRS modual later! Nop, great job, I am looking forward to your video on how to set it up with the Flywing FW450 V3 Helicopter (my next purchase) I will be watching your channel bro!
@@andrewvautour1795 Thank you for your reply. I will be doing a video on RadioMaster TX16S Mark 2 Max edition EdgeTx Radio. but concept and process is same. and you can easily understand how to setup your boxer after that.
@@alishanmao Excellent thank you. I am subscribed and getting all notifications so I will see it when it's up. Appreciate all your work, please don't ever stop :)
@@andrewvautour1795 planning to do a live show to teach how to program TX16s and boxer for FW450 v3 all flight modes using 2 switches. coming soon. even if you miss live show, you can always watch it later. Thanks for the sub :) welcome to channel
❤ The Shirt you are wearing. I should update my TX16S-Max to EdgeTX. lol By the way, RadioMaster said if you order the Gimbal upgrade with the original purchase of the Radio, the Warranty is not Void. Only if bought separately.
Hi bro. Amazing review Can you guide how i can bind flysky and frysky receivers with boxer? Ive TX16S and its pretty straightforward..is it same in boxer too where we select receiver type and bind?thanks
Sorry Ali I am the wrong side of 75 and I haven't got a clue on trying to send a video, but I have noticed if set up ATT on my other 450 2.5 it's flashing red as if no signal. Sorry I have tried thanks for the feedback.
Do you have a setup video on how to bind and setup this radio with Goosky S2. I have been having trouble finding good setup info. I have something wrong with my setup, and know I missed something. Flew mine yesterday, went backwards when I got up in the air. Landed but crashed a little and broke a few parts. :( It was off a little in the sim.. and shouldn't have tried to fly it. I'm guessing I need to join to access the video? Thanks!
RadioMaster Boxer 2.4G 16ch Hall Gimbals Transmitter Remote Control ELRS 4in1 CC2500 Support EDGETX Is that what i need to bind the volentex planes Ali cheers man
@@alishanmao the eachine ,volentex mini rc planes , Is it same procedure? Just that I am not familar with Radiomaster only spektrum , This will first time using this new radio :D
I’m still confused, I buy the boxer 4in1 version, will it bind to my elrs fpv drones without anything else? Or do I need to also buy the radiomaster micro module that plugs into the back?
yes if you buy 4-1, you have to buy ELRS module that will plug in the back. if you buy ELRS version radio and need 4-1, then you need to buy 4-1 module that will plug in the back.
I would very much appreciate a video showing how to setup a helicopter like the one you did previously for OpenTX on the TX16S. I tried doing it on my TX16S with EdgeTX and it's pretty close, but there some differences I'd like to have some help with.
Thanks for the very, in depth account of the Boxer. I have only just started to try FPV after a couple of years using DJI drones, flying VLOS. I have bought the Boxer and the Ranger Micro. How do I get the Ranger Micro to work with the Boxer please? I was advised to buy the Ranger Micro with an FPV Whoop connecting on ELRS. Thanks
one of the reasons i never happened to like ELRS is because their complexity of setup when you start with them. if you can finish the first steps right, still there are just too many updates to do on rx and tx often. but again this is how it goes. you have to have elrs configurator on your pc, then connect your elrs module to pc, run configurator, make sure to find your module model in the list and update the firmware, put in a pass phrase or name phrase that is a unique name so your elrs module will talk to your receivers only (Sigh!), then you power on the receiver, bind to module and upgrade recevier firmware over wifi (if your rx has wifi connectivity). after that your tx and rx are now use able. now you plug your module to the back of radio you power on the radio and choose external rx, with tbs crossfire protocol then you install your rx in your drone, bind and fly. if your drone already have rx. after binding you update firmware too (Sigh) and then you are able to fly. the initial setup has to be done right or else you will go bald due to headaches it will give you LOL. but if you do right, next steps just happen over wireless connection easily. I may just get into RC Airplanes or FPV airplanes once again and if i do, i will bring out my ELRS modules maybe. all the above does sound initimidating but when you start doing it, you will find the process goes very smooth. but its THE PROCESS to follow first time.
@@alishanmao Thanks for your reply Ali. I did try to download the configurator onto my new, windows 11 laptop but windows will not allow me to install it. I have tried several times but, no luck. The Edge TX Companion has downloaded and I have backed up my SD Card but that is as far as I can go at the moment.
@@stevemartin2274 see thats the problem. these software are just too much issue. wish they made it the way it was before. buy a module, install it, bind it and use it. no need any configuration. but don't know why they made it just too complicated.
Thanks for you reply. I have managed to get the configurator installed on my laptop. It was being prevented before by the windows firewall. I will start having a look to see if l can work out how to get the firmware updated now and maybe get the module working with the boxer. 🤞
Hi Ali would you mind giving me some advice, I purchased a fly wing 450 2.5 helicopter from Motion rc on 17th of April, I have tried to get it to work with no success, so I bought one from China and there's no problem, on the other one, I have to reverse channel 1 to get the servos to work do you think it's the recver or the H1 controller I have tried the transmitter from the good one and its still the same, can you help please. 🙏
Man I know this is an old post but I'm trying to find a radio that does it all for my quads and planes....I want the max but it's only offered in a elrs so I was gonna get a 4in module but it's cheaper to get the 4in1 and buy a elrs module but not for the max version 😢 so I might get the colored boxer and get a 4in1 and get a elrs module so I can fly everything 😁 whats your thoughts alishanmao?
well, max version is just pimped up gimbals and colored parts. I suggest get standard version, 4-1, get an ELRS module later when you need it and those pimped up parts (later if you need them) i used the standard version and I loved it. it was absolutely no issues at all. now i am using TX16S Max edition and to be honest if you are not a pro competing pilot of some sort, the max editions are really just a matter of showing off lookie lookie ma i have a pimped up version. So get the standard: bit.ly/rmboxertx (use our link, commission we earn supports our channel) and use it. until unless you really think you need those pimped up parts. and upgrade is straight forward.
Think you are the only reviewer of Boxer to point out which screws adjust what for the gimbals. Thank you😊
i do my best to give all info to my viewers
Yours is without a doubt THE BEST review of this radio on RUclips. I had the question in my head if I can set the throttle to auto center for GPS Heli's without opening the radio and you are the only person that answers that question. Good job, I have been watching your reviews for a while and I am a new subscriber, thank you for your content!
Thanks buddy and welcome to my Channel. I do my best to provide good info to people and of course, if anything i did not cover in this review or you have questions, feel free to contact me.
@@alishanmao No, that's the point, you covered EVERYTHING! After watching this, I decided to get this exact model, I was not sure if I should get the 4 in 1 or the ELRS and this video helped me to make the decision, the 4 in 1! I can always get the ELRS modual later!
Nop, great job, I am looking forward to your video on how to set it up with the Flywing FW450 V3 Helicopter (my next purchase)
I will be watching your channel bro!
@@andrewvautour1795 Thank you for your reply. I will be doing a video on RadioMaster TX16S Mark 2 Max edition EdgeTx Radio. but concept and process is same. and you can easily understand how to setup your boxer after that.
@@alishanmao Excellent thank you. I am subscribed and getting all notifications so I will see it when it's up. Appreciate all your work, please don't ever stop :)
@@andrewvautour1795 planning to do a live show to teach how to program TX16s and boxer for FW450 v3 all flight modes using 2 switches. coming soon. even if you miss live show, you can always watch it later. Thanks for the sub :) welcome to channel
Well done Ali, very good and useful information about the Boxer TX! Thanks and best regards from Switzerland, Andy
Glad it was helpful! Thank you for watching. If you like join my supporters group: www.buymeacoffee.com/alishanmao
❤ The Shirt you are wearing.
I should update my TX16S-Max to EdgeTX. lol
By the way, RadioMaster said if you order the Gimbal upgrade with the original purchase of the Radio, the Warranty is not Void. Only if bought separately.
Thanks for the info! if they install it for you, of course its under warranty but if you install those later then its different story
Thank you Bro, I've just purchased the same radio and waiting for it to get delivered
Glad I could help. join my supporters group: www.buymeacoffee.com/alishanmao
I think this is a good radio for my old rc planes and my upcoming fpv drone. Great video! 👏🏻👏🏻👏🏻
Good choice! bit.ly/rmboxertx
get one now
Hi bro. Amazing review
Can you guide how i can bind flysky and frysky receivers with boxer?
Ive TX16S and its pretty straightforward..is it same in boxer too where we select receiver type and bind?thanks
i have posted one tutorial for binding FlySky Receivers to Tx16s. method is same. ruclips.net/video/JbTEYCi1W4M/видео.html
Thank you so much for this informative video 🙏🏻
My pleasure 😊
Long time since i see one of ur video great video
Welcome back!
Sorry Ali I am the wrong side of 75 and I haven't got a clue on trying to send a video, but I have noticed if set up ATT on my other 450 2.5 it's flashing red as if no signal. Sorry I have tried thanks for the feedback.
if its flashing red, you can take off in ATT mode.
Note: Have heard it is hard to set up a plane without a flight controller on the ELRS version? ( 4 in 1 is easy)
super easy as 123 if you use PWM ELRS receivers. if you need those receivers, i can link you up
Can you tell me how many airplane or drone models can be stored on the boxer?
Thanks
50 :)
@@alishanmao thank you!
Do you have the settings for the TX 16? Thanks Tom
@@tommya1605 hi settings for which model?
Quick question ⁉️⁉️⁉️ ... will my Xjt external module work with the radio Master boxer? Thinking if twitching from taranis qx7 to Radiomaster!
it should i believe. check the pins configuration carefully though
Good review Ali. I would like to know how to setup the Boxer Radio to operate the Fly Wing Bell 206 V3 Helicopter.
follow my older setup, process and steps are same
Can the 4 in 1 pair with radio link I think it’s called fhss or similar. Cheers
SFHSS can. FHSS not
Do you have a setup video on how to bind and setup this radio with Goosky S2. I have been having trouble finding good setup info. I have something wrong with my setup, and know I missed something. Flew mine yesterday, went backwards when I got up in the air. Landed but crashed a little and broke a few parts. :( It was off a little in the sim.. and shouldn't have tried to fly it. I'm guessing I need to join to access the video? Thanks!
Hi buddy here is the video for heli setup. ruclips.net/video/rrkrMgcIlWY/видео.html
RadioMaster Boxer 2.4G 16ch Hall Gimbals Transmitter Remote Control ELRS 4in1 CC2500 Support EDGETX Is that what i need to bind the volentex planes Ali cheers man
welcome
@@alishanmao can you do a bind tutorial plz Ali man for this Transmitter Boxer Much appreciated bro ! ^^
@@nevTk-oe9ud bind to which model?
@@alishanmao the eachine ,volentex mini rc planes , Is it same procedure? Just that I am not familar with Radiomaster only spektrum , This will first time using this new radio :D
I’m still confused, I buy the boxer 4in1 version, will it bind to my elrs fpv drones without anything else? Or do I need to also buy the radiomaster micro module that plugs into the back?
yes if you buy 4-1, you have to buy ELRS module that will plug in the back. if you buy ELRS version radio and need 4-1, then you need to buy 4-1 module that will plug in the back.
Will this bind to flysky recivers ??? Thanks
yes
@@alishanmao thanks bro 👍👍👍👍👍👍👍
I would very much appreciate a video showing how to setup a helicopter like the one you did previously for OpenTX on the TX16S. I tried doing it on my TX16S with EdgeTX and it's pretty close, but there some differences I'd like to have some help with.
Sure I will make a video on that topic. It's first on the list
Thanks for the very, in depth account of the Boxer. I have only just started to try FPV after a couple of years using DJI drones, flying VLOS. I have bought the Boxer and the Ranger Micro. How do I get the Ranger Micro to work with the Boxer please? I was advised to buy the Ranger Micro with an FPV Whoop connecting on ELRS. Thanks
one of the reasons i never happened to like ELRS is because their complexity of setup when you start with them. if you can finish the first steps right, still there are just too many updates to do on rx and tx often. but again this is how it goes.
you have to have elrs configurator on your pc, then connect your elrs module to pc, run configurator, make sure to find your module model in the list and update the firmware, put in a pass phrase or name phrase that is a unique name so your elrs module will talk to your receivers only (Sigh!), then you power on the receiver, bind to module and upgrade recevier firmware over wifi (if your rx has wifi connectivity). after that your tx and rx are now use able.
now you plug your module to the back of radio
you power on the radio and choose external rx, with tbs crossfire protocol
then you install your rx in your drone, bind and fly.
if your drone already have rx. after binding you update firmware too (Sigh) and then you are able to fly.
the initial setup has to be done right or else you will go bald due to headaches it will give you LOL. but if you do right, next steps just happen over wireless connection easily.
I may just get into RC Airplanes or FPV airplanes once again and if i do, i will bring out my ELRS modules maybe.
all the above does sound initimidating but when you start doing it, you will find the process goes very smooth. but its THE PROCESS to follow first time.
@@alishanmao Thanks for your reply Ali. I did try to download the configurator onto my new, windows 11 laptop but windows will not allow me to install it. I have tried several times but, no luck. The Edge TX Companion has downloaded and I have backed up my SD Card but that is as far as I can go at the moment.
@@stevemartin2274 see thats the problem. these software are just too much issue. wish they made it the way it was before. buy a module, install it, bind it and use it. no need any configuration. but don't know why they made it just too complicated.
Thanks for you reply. I have managed to get the configurator installed on my laptop. It was being prevented before by the windows firewall.
I will start having a look to see if l can work out how to get the firmware updated now and maybe get the module working with the boxer. 🤞
@@stevemartin2274 you are welcome, wish all goes well
Doss Boxer support DSXm and likes of Safe and etc for BNF planes ?
only basic probably, not all features
Hello my friend ,is the Radiomaster boxer cc2500 version going to connect with flysky rx's??
yes it has flysky
github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md#cc2500-rf-module
@@alishanmao thanks buddy ,but i decided to go with the 4in1 after all ,is it better than cc2500??
@@Elisrc. has more protocols i believe
@@alishanmao oh thanks 👍👍👍
Can I order cc2500 with ELRS module because I already have a flysky receiver.
yes i believe you can
Really
Hi Ali would you mind giving me some advice, I purchased a fly wing 450 2.5 helicopter from Motion rc on 17th of April, I have tried to get it to work with no success, so I bought one from China and there's no problem, on the other one, I have to reverse channel 1 to get the servos to work do you think it's the recver or the H1 controller I have tried the transmitter from the good one and its still the same, can you help please. 🙏
Well I can't say this way why first one doesn't work and what is the issue. Can you make a detailed video and link me to it
Thanks Ali I am going to try and buy you a coffee.
Why would put module if it's already 4 in 1 ?
yes if you have ELRS version, you need 4-1 module, if you have 4-1 version and you need elrs, then you can add ELRS module
@@alishanmao ok , so radiomaster tx12 MK2 can be a 4 in 1 capable ?
Man I know this is an old post but I'm trying to find a radio that does it all for my quads and planes....I want the max but it's only offered in a elrs so I was gonna get a 4in module but it's cheaper to get the 4in1 and buy a elrs module but not for the max version 😢 so I might get the colored boxer and get a 4in1 and get a elrs module so I can fly everything 😁 whats your thoughts alishanmao?
well, max version is just pimped up gimbals and colored parts. I suggest get standard version, 4-1, get an ELRS module later when you need it and those pimped up parts (later if you need them) i used the standard version and I loved it. it was absolutely no issues at all. now i am using TX16S Max edition and to be honest if you are not a pro competing pilot of some sort, the max editions are really just a matter of showing off lookie lookie ma i have a pimped up version. So get the standard: bit.ly/rmboxertx (use our link, commission we earn supports our channel) and use it. until unless you really think you need those pimped up parts. and upgrade is straight forward.
@alishanmao thanks alot for your help brother🙏🏼
@alishanmao also I wants to know if it is easy to bind spektrum planes with the 4in1 module? Sorry thanks again 😊
does it work with FrSky R-XSR
it should of course if you have 4-1
Thanks for sharing sir
Most welcome
If they had only given it a 212x64 screen instead of 128x64 this could have replaced the Taranis X9D.
very true :)
My rm almost started a fire. Never again!!!!! But I paid for mine.
really how?
IF YOU TURN IT ON WITHOUT THE ANTENNA YOU WILL KILL IT!
Answered my compatibility questions
Did it a few times. nothing happened. all worked well. just a hype
too big too eavy hate wheel controle with click
.. lol
i find it easy to program with wheel control
@@alishanmao jump to next line when click
@youmad3269well i just got the game pad style and size, all new RadioMaster Pocket Radio: bit.ly/rmpocketx
video review coming soon
Hi Sir, I intend to get myself a Boxer with the 4 in 1 module. My question: is it possible to bind Frsky v8fr-II and vd5m receiver to the Boxer? Thx
no. just d8 and d16 protocols