The shown point cloud is *not* the scanned object - the scanned object has its mouth closed, the point cloud has its mouth open. Also, the point cloud shown does not have points in layers as suggested by the time lapse, but the points concentrate radially in front of and behind the head, suggesting someone modeled it starting with a sphere primitive.
Cool build. I’m a bit disappointed that you didn’t credit the original build. If you could please link to my original video in the project description, I would appreciate it!
Nice project even tho the point clowd you've obtained at the end is not the one from the object you've scanned, can be a little deceiving because it looks like you can get some killer resolution while in reality you can't
Well made video and a neat idea, but the point cloud was clearly modeled from sphere primitives, not scanned (the ducks' bills don't even match). The disproportionate vertex density around the eyes and bill were an immediate giveaway as were the converging vertices toward the back of the head (exactly as a UV type sphere does). Not trying to expose you as a phony, but when you have over 100,000 views on your videos, you should probably make them more convincing before everyone in the comments starts calling you out.
En el scaneo el pato tiene el pico cerrado y en la toma de puntos el pato tiene el pico abierto, no es el mismo pato, salvo que la maquina tenga inteligencia artificial y detecte que el pato estaba hablando, estas publicaciones dejan mucho que desear y no le hacen bien al sitio.
Облако точек не соответствует реальному сканированию. Это видно невооружённым взглядом, облако построено из триангулярного файла 3D модели типа STL или подобного. Обман
J'aimerais bien le VRAI nuage de point, pas un faux qui en fait est une modélisation ou on ne voit que les points. Le vrai résultat doit plutôt représenter une patate un peu diforme
@@d_besson кринжу словил от того, как он глаза из наклеек отсканировал. Мог бы хотя б распечатать эту несчастную модель утки и сгладить слои, не палился бы так
Es una lastima que no muestre el verdadero resultado del escaneó, los modelos son diferentes y la nube de puntos no coincidente. Preferiría ver una nube de puntos mal hecha a que me quieren tomar el pelo
just a little question : beetween 5:15 and 5:30 when did you add the laser diode ? is it just for easier use of the scanner ( seeing what it is doing in realtime) or did you wire it directly in the distance module to get a narrower area for the measured dot in the point map ?
He is deceiving us. The one model he is scanning has mouth shut and the point cloud has mouth open because they are two different models. There is no way IR could get such detail. Atleast not yet.
Well Super Make Something has a point since this video was posted 9 months ago while Super Make Somethings video was posted 6 years ago. And all you do is pin his comment? You should put a credit on your descriptions. It does look like you pretty much copied his design to great detail. I'm going to subscribe to Super Make Something and not this channel. You should at least credit your sources properly.
I think this project is a sales exercise for jlcpcb - unlikely it works properly. No homing switch on z axis - the sensor shown is not that accurate. You would be better off with a laser line projector and a camera at an angle to determine the profile. Also, you'd need some sort of calibration object to set this up.
WOW!! Che risoluzione. Mi interessa l'idea ma la superfice deve essere più grande per il mio utilizzo. Motori p-p e riduttori. Ma al posto del sensore IR, perchè non hai messo il modulo HC-SR04? Schemi\collegamenti e codice? Grazie mille.
Hi. Totally excellent. I'm retired and live in a small rental house, and can't make one myself. How much would you charge to make one for me? Thank you.
Hello sir, first of all thank you for the video. Second, i want to ask you if I can use Infra Red Proximity Sensor instead of that shown right here. (It is a bit big in size) and i have a lot of them laying around
Hey there, I own 2 pouch packaging machine . They have serious problems with their controllers and are out of order. Their manufacturer consider them as obsolete. I am wondering if Arduino can take over the old PLC controller.
the sharp sensor's output is a voltage, so if sampled using an 8bit or 12bit analog-to-digital converter this gives you the resolution, but there's videos about that Sharp module that mention the need for software filtering of the data. more expensive sensors sometimes have a microcontroller on-board that do the filtering. else the noise/errors may swing larger than the 1/4096 or 1/256 resolution of the ADC
bonjour je voudrai savoir comment faire son pcb car j'aimerai reproduire votre diy pour voir ci jarrive car jaimerai testé d'en faire un mais je sais pas comment faire le meme pcb
Ничего крутого на самом деле. Проект у автора не удался, он показал не сканированную сетку, а сетку 3д-модели изначально нарисованной на компьютере. Думаю, получившаяся точность оказалась слишком низкой чтобы ею можно было похвастаться.
The shown point cloud is *not* the scanned object - the scanned object has its mouth closed, the point cloud has its mouth open.
Also, the point cloud shown does not have points in layers as suggested by the time lapse, but the points concentrate radially in front of and behind the head, suggesting someone modeled it starting with a sphere primitive.
Indeed! Nice catch!! :)
I was wondering how he nanaged to get details between the bec and the forehead which is in the shadow of the sensor.
lmfao
yeah... i caught that too.
Great observations but you missed the conclusion; Mr Innovative is a liar.
Cool build. I’m a bit disappointed that you didn’t credit the original build. If you could please link to my original video in the project description, I would appreciate it!
ruclips.net/video/-qeD2__yK4c/видео.html
I'm glad you released your project into the world, sorry someone had to grab it and copy it without attribution!
@@AndrewSink Thanks! Hopefully this message thread will help RUclips recommend that video to those watching this one at least! 🤞
Electronoobs also copied you lol
@@KindOfyeah Yea I saw that a while back. But at least he put a credit link in the video description.
Nice project even tho the point clowd you've obtained at the end is not the one from the object you've scanned, can be a little deceiving because it looks like you can get some killer resolution while in reality you can't
Well made video and a neat idea, but the point cloud was clearly modeled from sphere primitives, not scanned (the ducks' bills don't even match). The disproportionate vertex density around the eyes and bill were an immediate giveaway as were the converging vertices toward the back of the head (exactly as a UV type sphere does). Not trying to expose you as a phony, but when you have over 100,000 views on your videos, you should probably make them more convincing before everyone in the comments starts calling you out.
Это фейк
Сканировал утёнка с закрытым клювом
На 3d модели клюв открыт 😂🤣
Про клюв я не сообразил но вот сетка с разной плотностью сразу навела на мысль о том что это наебалово.
еще то, что он не умеет читать кириллицу, иначе он бы удалил ваш комментарий 🤣
О вобще не читает ничего
En el scaneo el pato tiene el pico cerrado y en la toma de puntos el pato tiene el pico abierto, no es el mismo pato, salvo que la maquina tenga inteligencia artificial y detecte que el pato estaba hablando, estas publicaciones dejan mucho que desear y no le hacen bien al sitio.
tenés razón, no me habia percatado de eso. ademas ya comentó el youtuber al que le robaron este proyecto.
Облако точек не соответствует реальному сканированию. Это видно невооружённым взглядом, облако построено из триангулярного файла 3D модели типа STL или подобного. Обман
У утки рот закрыт а у модельки отсканированной открыт 🤣🤣
нас нае*али, расходимся...
Это подделка. stl и облако точек полностью отличаются от отсканированной утки. Хорошо видно по клюву.
да и то что частота точек в области клюва и глаз отличается от всего остального тела
Когда Вас будут сканировать , у Вас тоже клюв будет открываться. 😊😊
Тоже так подумал
J'aimerais bien le VRAI nuage de point, pas un faux qui en fait est une modélisation ou on ne voit que les points. Le vrai résultat doit plutôt représenter une patate un peu diforme
c'est clair ! c'est pas du tout le même canard en plus
@@simonrobert3447 oh oui celui scanné à le bec fermé et le nuage de points à le bec ouvert 🐥
Looks the same as the 3d scanner from electronoobs
It is
бред! модель и скан отличаются
похоже на фейк
Нет скетча, и на модели клюв утки открыт, а на столе утка с закрытым клювом
@@BUPS.DELICIOUS там ещё точки на модели расположены не по тем плоскостям, в которых сканирование происходило
@@d_besson кринжу словил от того, как он глаза из наклеек отсканировал. Мог бы хотя б распечатать эту несчастную модель утки и сгладить слои, не палился бы так
@@d_besson он еще и пролайкал лол))
0.06 The yellow model in the middle has its mouth shut, but both Point Cloud and STL look different. How come?
Es una lastima que no muestre el verdadero resultado del escaneó, los modelos son diferentes y la nube de puntos no coincidente. Preferiría ver una nube de puntos mal hecha a que me quieren tomar el pelo
клюв открыт👎👎👎
Hello i've visited your web, but I can't see this proyect in there. Where could I see how you do it step by step, please?
Вам срут в глаза, а вы довольны.
Сравните утёнка и полученную 3D модель - они разные.
ИК датчик расстояния подключен на вход потенциометра👍
Object that's scanned and the poin cloud are different. 😂😂😂😂. And you want us to believe that you archived that resolution from that sensor and 😂😂😂
Бля, утка на столе и отсканированная - это 2 разные утки, зачем обманывать????!!!!
What happened to your duck's lip and eyes' position?
You fooled most of dumb people
nice trick you worth it xD
The focal distance of that sensor doesn't it disturb to make clear scan of parts?
I like the "Innovative" wire routing slots. Nice Job!
awwwhhh now I want to build this myself 😂😂
just a little question : beetween 5:15 and 5:30 when did you add the laser diode ? is it just for easier use of the scanner ( seeing what it is doing in realtime) or did you wire it directly in the distance module to get a narrower area for the measured dot in the point map ?
The Diode is to make even more Schmucks believe this is real, look at the scanned image and compate the heads...
That point cloud from that sensor? I believe it when I see the code and details on the sensor.
Does not look realistic
He is deceiving us. The one model he is scanning has mouth shut and the point cloud has mouth open because they are two different models. There is no way IR could get such detail. Atleast not yet.
Wait a minute... Those ducks don't match!🤨📸
Ducks are not same bro how is that possible 😂😂
La papera ha la bocca chiusa, dopo lo scanner ha la bocca aperta!
Well Super Make Something has a point since this video was posted 9 months ago while Super Make Somethings video was posted 6 years ago. And all you do is pin his comment? You should put a credit on your descriptions. It does look like you pretty much copied his design to great detail. I'm going to subscribe to Super Make Something and not this channel. You should at least credit your sources properly.
I think this project is a sales exercise for jlcpcb - unlikely it works properly. No homing switch on z axis - the sensor shown is not that accurate. You would be better off with a laser line projector and a camera at an angle to determine the profile. Also, you'd need some sort of calibration object to set this up.
Этот сканер имеет большую погрешность и ограничения в использовании, т.к. не сканирует предмет сверху.
Тоже подумал об этом - как он справится с углублением на спине утки?
Оказалось - очень просто.
У автора левая 3D модель совсем другой утки🤨
Awesome, good work mate.
PURPLE COLOR! Cool!
WOW!! Che risoluzione. Mi interessa l'idea ma la superfice deve essere più grande per il mio utilizzo. Motori p-p e riduttori. Ma al posto del sensore IR, perchè non hai messo il modulo HC-SR04? Schemi\collegamenti e codice? Grazie mille.
Hi. Totally excellent. I'm retired and live in a small rental house, and can't make one myself. How much would you charge to make one for me? Thank you.
The literal crap this thing would actually make, please don't pay and encourage his lies.
Simple and Perfect Project. Do you help me for Electronic and Arduino's software? Does Arduino need any libraries? I don't know this, thanks
No need library for basic things
Hello sir, first of all thank you for the video. Second, i want to ask you if I can use Infra Red Proximity Sensor instead of that shown right here. (It is a bit big in size) and i have a lot of them laying around
Reverse engineering 🔥
Out of box project 🙌🏻
Photogrametria - gives better result. May be berre turn up 2 cameras instead one IR distance metter?
Je suis très intéressé par votre projet. J’aimerais bien avoir les plans pour pouvoir en construire un. Merci beaucoup
D'ais que j'ai des nouvelle je vous le dit,j'ai demander pour la caméra. Je voudrait les plans aussi.
Great Project, thx for sharing! Do you know what could be the maximum resolution?
And you do not see that the ducks are different?
That’s amazing! Thanks for your sharing which has given me an inspiration!
That is an awesome project!
Awesome project, could you please share the necessary files?
Thanks
And where are the links to the diagrams, the details of what sizes. And so it is not interesting, maybe you did not collect it yourself.
Have you thought about making a microscope?
Where is the Code? This without the firmware is just useless. Anyone can spin a motor but for something like this the software is the essential part.
I need the name of the program you program the arduino with
This is very clever and compact. Well done!
Excellent
Hey there, I own 2 pouch packaging machine . They have serious problems with their controllers and are out of order. Their manufacturer consider them as obsolete. I am wondering if Arduino can take over the old PLC controller.
Wonderful
Are there any limits to the accuracy of detail from the sensor or is it only lmitited by sampling rate and min/max range?
the sharp sensor's output is a voltage, so if sampled using an 8bit or 12bit analog-to-digital converter this gives you the resolution, but there's videos about that Sharp module that mention the need for software filtering of the data. more expensive sensors sometimes have a microcontroller on-board that do the filtering. else the noise/errors may swing larger than the 1/4096 or 1/256 resolution of the ADC
Вообще это фигня не работает обратите внимание! На пластмассовую утку и то что он нарисовал. Они совсем разные!!!
ducks are not the same?
Is there a kit or are there plans and parts list?
What is point cloud software?
Yeah, he still never gave credit. I would go watch the orginal video than this one.
Loved your work! Can you please share the brd file of the PCB as well?
It is very professional 👍👍👍👍
May be - you open your scatch?
Thank you!
Why did U used Three 7805 voltage regulator ?
Awesome idea!
Hello I dont know wheter you answer on my question but I have one question whether motor about power 6V will ok to this project ?
Oui,c'est bien de montré, mais faut il trouver les pieces (la caméra par exemple).
Can you share the code and stl files?
That is so cool !!!
Awesome thanks for sharing 👍.
bonjour je voudrai savoir comment faire son pcb car j'aimerai reproduire votre diy pour voir ci jarrive car jaimerai testé d'en faire un mais je sais pas comment faire le meme pcb
That’s brilliant
Superb work 💪💛
💛💛
Это же круто,👍🏻 а теперь сделай сканер для больших объектов
Ничего крутого на самом деле. Проект у автора не удался, он показал не сканированную сетку, а сетку 3д-модели изначально нарисованной на компьютере. Думаю, получившаяся точность оказалась слишком низкой чтобы ею можно было похвастаться.
Amazing work
Hello. I can't find the project in the link you provided above!
are you try to use a xbox kinect v2? you think that can work like a better 3dscanner with that scanning machine? sorry for my english :(
Points cloud looks very suspicious. It could not be generated by this scanner.
Hola. Esta a la venta?
On trouve le capteur photo sur go tronique,pas cher.!
The BGM also nice 👍. What is the name of that music?
Original project can be found in ( ruclips.net/video/-qeD2__yK4c/видео.html )
Did you build a mini table saw?
ruclips.net/video/ny1kiYvyxmQ/видео.html
I would like know how it works more deeper. :'3
Do you add laser diode?
Fascinating!
No firmware No software information How does it work bro
Amazing
Wher a find sketch from Arduino?
Could you please share me for Arduino code?
Если скам выглядит, как скам, собран как скам, прошит как скам, то это (подумайте сами)
Wow perfect
What is the make of the table-top circular saw you are using?
ruclips.net/video/ny1kiYvyxmQ/видео.html
Only wow such a amazing
What software to use?
where can I get the code for ino sketch program..?
What no codes..??🤔
наебалово! =) У объекта сканирования клюв сомкнут, а на модели уже клюв открыт =)
Thank you Dear
Awesome project. Can I get pcb file of this project? Thanks in advance.
I just had the equipment for this