Really nice build I have been searching the net as to what type I want to build. I like yours Best. I thought I like that guy when you gave the finger to your anvil. I have been in search For a good one for years. Not paying these CRAZY prices. I,m using a huge steel block from A scrap yard. I subscribed & thank you my friend.
Super cooler Hobel! Respekt! Bin auch gerade dabei mir einen zu bauen, kannst du mir sagen, wie das Teil heißt, was du mit Passfeder am Motor befestigt hast? Vielen Dank!
Looks great, wish you would have included some measurements and materials list, but Oh well, I guess I'll just have to come up with my own. Thanks for the video, wish you would have talk more though. 🖖😎
Can you write the exact dimensions of the central pillar and the impact mechanism? Thank you. Tek sad vidim u komentarima da si naš rodjače pa ako ti nije teško da mi napišeš dimenzije ovog čekića, jer hoću da napravim isti,naravno ako te ne mrzi?
Welding on a tire rim with rubber mounted can start a pyrolysis reaction and is a quick way to the emergency room or morgue, I'd highly advice against that for anyone watching this video.
Yep make sure you have tire deflated valve core removed. A good friends dad was welding on a wheel back when I was pretty young and it blew up and killed him be safe out there people
Pyrolysis is the reaction that happens when you apply heat to a material without oxygen. Or in more technical terms thermal decomposition of materials at elevated temperatures in an inert atmosphere. Which of course does not apply here. This does applies (in large) for making charcoal for example. What can and WILL happen is the expansion of air inside the tire due to the increased temperature combined with localized weakening of rubber. It's not just best to remove the valve, it's better to remove the entire tire to prevent accidentally weakening your tire. High pressure blowouts are pretty dangerous, especially when you are welding up close. Serious injury or even death may occur. But then again, the same applies for everything you see on the internet. USE YOUR BRAINS!!!!! DO.NOT.COPY.WITHOUT.THINKING.!!!
OHSA Section 25: Pyrolysis is a thermochemical decomposition of organic material which can occur at elevated temperatures in the absence of oxygen. This decomposition process only requires the presence of rubber and heat. When heat is applied to the tire or to tire components, hydrocarbon vapours are released inside the tire. As the vapours are released, the air pressure and temperature within the tire increase dramatically. These vapours are highly flammable. If the flammable vapour inside the tire makes contact with oxygen at a temperature in excess of 400 degrees Celsius, auto-ignition can occur, resulting in an explosion. Once the decomposition process begins, it is irreversible. There is no visual indication that the decomposition process is taking place. Depending on the particular circumstances, an explosion may occur immediately, within minutes or several hours after the exposure to the heat source. In many instances, an explosion can cause the tire and/or wheel components to be thrown great distances, resulting in severe worker injuries and/or fatalities as well as significant property damage.
@@ferrumchnop6617 I can't fault you for quoting OSHA, but chemically speaking that's bullshit since most tires are filled with regular oxygen rich air. Not to mention the rest of the explanation. Good enough for a regular OSHA warning, but scientifically incorrect all over. but let's just stick to "it's dangerous"
I would of used lead instead of concrete for adding weight and noise reduction. Lead really absorbs so much better than crete. But I guess cost is another factor that must be considered. Nice work fella too. VF
@@diyguru1 Shame you live far from me. I would of just given you the lead. Oh well, maybe next time. Keep up the builds for us all to see on RUclips. VF
@@joeysanchez5926 That is how I got lot of lead ingots for free. Not really sure one can call it free as cleaning and melting was time consuming and challenging too.
Što jače stisnem pedalu (znači jače pritisnem motor na kotač) to čekić brže udara i samim time je i jači udarac. Težina čekića je 20 Kg i ne može on toliko jako udariti da mi nekontrolirano stanji materijal.
@@diyguru1 hvala na odgovoru. Nenad mi je skrenuo pažnju na Vaš rad kada smo pričali o izradi noževa. Svi alati izgledaju super tim više što su izrađeni diy,a koliko vidim krajnji rezultat je vrhunski. Puno volje i ljubavi je tu uloženo. 👍
What are the dimensions of the upright with the wheel attached? I would guess based on the video somewhere in the neighborhood of 6 inch by 6 inch by 80 inch (15 x 15 x 200 cm)?
Fantastic job. How tall is the post that holds the tire and how tall is the anvil (bottom post). This has been the best power hammer build on RUclips. Yours is the only one I have seen that you can actually build from watching you build it..Hope to see more builds from you.. I am going to check out the knife build on your channel next.
Awesome build. Going to make one soon. I like the tire idea. I'm going to use an old solid forklift wheel for mine I think. And figure out a way to give it adjustment in the hammer lengths by doing a swap for moving the flywheel pin location. Not sure yet. Question: How much did you spend in steel for this build?
For all those wanting measurements. Here is a link for a rock crusher. It is not as refined as this power hammer. It can be adapted. No insult intended to the builder of this power hammer as it is a very nice build. I’m thinking a treadmill motor and controller for a hammer mill. Including the emergency stop ruclips.net/video/yKnTT9XtkdM/видео.html
Just a quick question. Is there a brake, or do you even need one on a light hammer like this? I'm going to be building a larger version of this type of hammer, and I'm planning a brake on mine.
good evening. My name is Javier, I find your design very interesting. You could provide closer measurements to make a piece like the one you presented. greetings from Mexico
My house has 5 floors. My workshop is in the basement. I have a good concrete foundation. There are no cracks. If you have a weak surface, the floor may crack because the vibrations are quite strong.
![1920s Power Hammer [Restoration] (Part 2)](http://i.ytimg.com/vi/xflVNifjPwc/mqdefault.jpg)
![1920s Power Hammer [Restoration] (Part 2)](/img/tr.png)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Me and my brother have been building a spare tire hammer your video is awesome step by step how to
Thanks. One of the better Versions. Much appreciated
Tnx.
Epic build!!! You did an amazing job building it... that knife at end also absolutely amazing!!! I really want to build one myself
Tnx
Один из элегантный ших молотов.👏👏👍🤝🔥👏👏👏👏👏🍹
Really nice build I have been searching the net as to what type I want to build. I like yours
Best. I thought I like that guy when you gave the finger to your anvil. I have been in search
For a good one for years. Not paying these CRAZY prices. I,m using a huge steel block from
A scrap yard. I subscribed & thank you my friend.
Tnx.
Wonderful video non need for words very easy to understand .
Thank you for sharing. Sir
Tnx
Good job on the hammer and beautiful end product, man it turned out nice! I enjoyed the video!
Missing a brake to stop wheel from tuning when foot pedal is released ?
Good job. Congratulations your idea help lots. Of people to understan the principle.
Do you have plans for this? i would love to build this for my blacksmith workshop
total cool, alles was du baust ist absolut klasse
Best diy I have seen so far thanks for sharing.
Tnx
Nice looking power hammer. Can you share a material list?
A "Velha Bigorna" merece respeito. Você ainda vai precisar dela.
The "Old Anvil" deserves respect. You will still need it.
I’m kidding, I still love my old anvil.
@@diyguru1 That's right! 😄👍
کارت عالیه ، آفرین .
amazing bro ! and really nice job with that knife
Super cooler Hobel! Respekt! Bin auch gerade dabei mir einen zu bauen, kannst du mir sagen, wie das Teil heißt, was du mit Passfeder am Motor befestigt hast? Vielen Dank!
Best diy men ever
Very slick. Beautiful job on the knife.
Where you get the face shield with the ear muffs? Good ideas on how simple things can be changed to useful tool. One trailer axle is now.....
Good job bro.thanks for video
Great job. Thank you 😊
Nice clean lines and simple build thanks for sharing
Great job done! However, the efficiency of the hammer can be increased by about 30 more%
¡Salud!
Excelente trabajo.
Gracias por compartirlo.
Ooohhh!!!! tyre!!! THAT's the secret.... Thank you for your video :)
;)
very useful thank you so much
Tnx
Great Man and genius,
Thank you Guru (teacher)
You Sir are a God amongst men!
Tnx.
Looks great, wish you would have included some measurements and materials list, but Oh well, I guess I'll just have to come up with my own. Thanks for the video, wish you would have talk more though. 🖖😎
I didn't work on any blueprint. I got the measurements on the go depending on the material I had.
Where did you buy the polyamide pa6? I'm having trouble finding some.
www.ebay.com/itm/182424141530?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D2%26asc%3D20201210111314%26meid%3Dcabb5679bb8e45f5a14312e72175cc39%26pid%3D101195%26rk%3D4%26rkt%3D9%26sd%3D142247924404%26itm%3D182424141530%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv9PairwiseUnbiasedWebWithSearchFilterPromotion%26brand%3DMarkenlos&_trksid=p2047675.c101195.m1851&amdata=cksum%3A182424141530cabb5679bb8e45f5a14312e72175cc39%7Cenc%3AAQAGAAABIIdETpqicceSh%252FKWJul4qzvh3awpeBWOdLwnXBUPPxZMq80bvqVEsVYR%252BRfAVPlcLPCbFYX3rfWrtIvfmKt%252B3sa21e0%252BFnhHxm0U%252FgVg%252BR8w%252Fw1qFK7CbBjC3fT3nxRrDEc%252FZzJriN%252B5mX%252FOWs6%252F5Ph%252BLJIwS1Lrjbjqo5s8gErmaouyXxHC6iECPHFqTtK9eBU5ky1plzaFtRJx1ZokuwxGNZxaJ4%252Fw3Oq3Toemk1FgXA7HNLp8IagQXE%252FWt2A0r8hUrVpQDV680vxZ7K5f5qoex9FS0mTLSNzVhxBb8GWloahXYKcuYkPeu2cjpzw89wuG%252BmeW8VJg9rreR4MzRbCyNGL0gEqOd8g9VTWiyWS23lmKbFB0CM3wp1xZZE80fQ%253D%253D%7Campid%3APL_CLK%7Cclp%3A2047675
Nice ! Very impressive
How much gym power rack axel is out of center?
Sorry. I did not understand the question.
Perfekcija... Samo naprijed 👍👍👍
Hvala.
Great build! I like this style
Great machine and it works....... Come winter do you need to change to a winter tire ? ? ?
:)
Great job man, it makes me want to give it a go...
where did you get the drive wheel that is on the motor. i found a 4 inch
It is custom made. A friend has a lathe. I gave him the measurements
Great... If you need work, let me know?
Can you write the exact dimensions of the central pillar and the impact mechanism? Thank you.
Tek sad vidim u komentarima da si naš rodjače pa ako ti nije teško da mi napišeš dimenzije ovog čekića, jer hoću da napravim isti,naravno ako te ne mrzi?
Sve sam radio iz glave i kako sam imao materijala tako da nemam točne mjere. Prvo sam napravio škare, a sve ostalo na temelju toga.
Kewl hammer and build, subscribed :)
Grate video
Always bevel the material when it's thick otherwise it won't be a structural weld
Welding on a tire rim with rubber mounted can start a pyrolysis reaction and is a quick way to the emergency room or morgue, I'd highly advice against that for anyone watching this video.
Yep make sure you have tire deflated valve core removed. A good friends dad was welding on a wheel back when I was pretty young and it blew up and killed him be safe out there people
Pyrolysis is the reaction that happens when you apply heat to a material without oxygen. Or in more technical terms thermal decomposition of materials at elevated temperatures in an inert atmosphere. Which of course does not apply here. This does applies (in large) for making charcoal for example.
What can and WILL happen is the expansion of air inside the tire due to the increased temperature combined with localized weakening of rubber. It's not just best to remove the valve, it's better to remove the entire tire to prevent accidentally weakening your tire. High pressure blowouts are pretty dangerous, especially when you are welding up close. Serious injury or even death may occur.
But then again, the same applies for everything you see on the internet. USE YOUR BRAINS!!!!! DO.NOT.COPY.WITHOUT.THINKING.!!!
OHSA Section 25: Pyrolysis is a thermochemical decomposition of organic material which can occur at elevated temperatures in the absence of oxygen. This decomposition process only requires the presence of rubber and heat. When heat is applied to the tire or to tire components, hydrocarbon vapours are released inside the tire. As the vapours are released, the air pressure and temperature within the tire increase dramatically. These vapours are highly flammable. If the flammable vapour inside the tire makes contact with oxygen at a temperature in excess of 400 degrees Celsius, auto-ignition can occur, resulting in an explosion.
Once the decomposition process begins, it is irreversible. There is no visual indication that the decomposition process is taking place. Depending on the particular circumstances, an explosion may occur immediately, within minutes or several hours after the exposure to the heat source. In many instances, an explosion can cause the tire and/or wheel components to be thrown great distances, resulting in severe worker injuries and/or fatalities as well as significant property damage.
@@ferrumchnop6617 I can't fault you for quoting OSHA, but chemically speaking that's bullshit since most tires are filled with regular oxygen rich air.
Not to mention the rest of the explanation. Good enough for a regular OSHA warning, but scientifically incorrect all over.
but let's just stick to "it's dangerous"
OHSA and OSHA are two different things. Key word to the reaction being vapors. I understand what you were trying to say though.
Sir can you tell me what is motor rpm and motor PH ?
How to buy the engine..or what name of engine that
Great Build! What size motor is that? HP, RPM, Voltage, etc...
jump to 6:47 and click play
I would of used lead instead of concrete for adding weight and noise reduction. Lead really absorbs so much better than crete. But I guess cost is another factor that must be considered. Nice work fella too. VF
I totally agree with you. But the price of lead would cost about 120USD, and concrete would cost me 18USD.
@@diyguru1 Shame you live far from me. I would of just given you the lead. Oh well, maybe next time. Keep up the builds for us all to see on RUclips. VF
@@diyguru1 Amen to that fella for sure.
What about lead from tire weights. We used to throw buckets full of old weights at the tire shop I worked at.
@@joeysanchez5926 That is how I got lot of lead ingots for free. Not really sure one can call it free as cleaning and melting was time consuming and challenging too.
Bonito trabajo maestro.. Profabor me daría cuanto de hp tiene el motor.. O que motor recomienda..y de cuantos hp
This motor is 550w (0.7HP). It's an old pressdrill engine. A stronger engine would be even better.
calidad mi amigo saludos desde el salvador
I am curious shouldn't u let the concrete set good before welding that cap on for any expansion that may occur or contraction
Of course. I welded the cover the second day after the concrete had hardened.
@@diyguru1 oh ok I couldn't tell because of the time lapse just curious thank you and really cool set up
Na koji način regulirate hod i kako odredite da u konačnici neće udariti prejako te previše istanjiti matrijal koji obrađujete?!
Što jače stisnem pedalu (znači jače pritisnem motor na kotač) to čekić brže udara i samim time je i jači udarac. Težina čekića je 20 Kg i ne može on toliko jako udariti da mi nekontrolirano stanji materijal.
@@diyguru1 hvala na odgovoru. Nenad mi je skrenuo pažnju na Vaš rad kada smo pričali o izradi noževa. Svi alati izgledaju super tim više što su izrađeni diy,a koliko vidim krajnji rezultat je vrhunski. Puno volje i ljubavi je tu uloženo.
👍
Is this machine all or nothing? Does it have a clutch like effect or not?
The harder the pedal is pressed, the faster the hammer strikes.
Very nice work, do you by any chance sell building plans of it?
Unfortunately I don't have a draft. It's all in my head.
Do you have a parts list?
Do you sell plans for this power hammer.
One of the best DIY hammers I have seen . (:
Unfortunately I have no plan. I worked out of my head.
What are the dimensions of the upright with the wheel attached? I would guess based on the video somewhere in the neighborhood of 6 inch by 6 inch by 80 inch (15 x 15 x 200 cm)?
Tako je. 6x6x80 inch (15x15x200cm), a debljina je 0,2 inch (0,5cm).
So...is your next project a power rack add on?? Or...?
ruclips.net/video/ac0QGTz0g7s/видео.html
Fantastic job. How tall is the post that holds the tire and how tall is the anvil (bottom post). This has been the best power hammer build on RUclips. Yours is the only one I have seen that you can actually build from watching you build it..Hope to see more builds from you.. I am going to check out the knife build on your channel next.
Sorry for the late reply. The pillar is 2.3 m or 7.6 ft high.
Congrats
do you even lift bro?
Is this a paper knife?
Which HP power motor use in ?
6:52
Awesome build. Going to make one soon. I like the tire idea. I'm going to use an old solid forklift wheel for mine I think. And figure out a way to give it adjustment in the hammer lengths by doing a swap for moving the flywheel pin location. Not sure yet.
Question: How much did you spend in steel for this build?
Thank you. The whole machine weighs approx. 250 kg
chulada de maquina
Beautiful
Muito bom e muito didático também. Parabéns.
Tnx
For all those wanting measurements. Here is a link for a rock crusher. It is not as refined as this power hammer. It can be adapted.
No insult intended to the builder of this power hammer as it is a very nice build.
I’m thinking a treadmill motor and controller for a hammer mill. Including the emergency stop
ruclips.net/video/yKnTT9XtkdM/видео.html
Excellent job!
What's the name of that song? 17 minutes wasn't enough, I need more
Unfortunately I don’t remember the name of the song, but I downloaded it here. studio.ruclips.net/channel/UCe5x4qPs1ee3FDioUZtUTKwmusic
tnx bro.more diy home gym please 😘
Tnx. My next project is a power rack add-on
@@diyguru1 lever arms next pls :) thank for your videos
Meus parabéns amigo
Just a quick question. Is there a brake, or do you even need one on a light hammer like this? I'm going to be building a larger version of this type of hammer, and I'm planning a brake on mine.
I don’t have a brake and I don’t think it’s needed. After releasing the pedal, the anvil strikes once more and stops.
Muito bom mesmo pretendo compra uma
Nice work man
Think make some like your
What kind of motor is that at 14:15?
It's an engine from an old drill press. 0.7 HP (550Watt)
@@diyguru1 danke!
What did you fill your anvil stand “post” with?
Also concrete
Hey from st lucia need one desperate how much?
Verry creative piece of equipment.
What do you mean by 52,00 USD is it $52.00 or you want to mean $5,200.00
$ 52. I had the engine from an old pressdrill and it is not included in this price
byowty machin 👍👍👍👍
good evening. My name is Javier, I find your design very interesting. You could provide closer measurements to make a piece like the one you presented. greetings from Mexico
I don't have a draft. I worked from the material that I had, and I was determined measures on the fly.
Stuff like this is not an exact science. You take what you have on hand, copy the concepts the best you can, and tweak it as you go.
Wonder what his next project is going to be? 🤔
You are very creative :) If you want, you can make DIY dip bars for your squat rack like rogue or something like that, but cheaper :)
waste of time and money, get a job on a ranch or iron work and get paid to work out
Gut gemacht!
I sure wouldn’t mind getting a material list and measurements.
I don't mind.
could I get the same materials list and measurements? Montana USA
great video and a great power hammer
harleyman59873@blackfoot.net
@@diyguru1 may i have them also? Greetings from Uzbekistan
fair.uz@mail.ru
Do you have any new projects upсoming?
Probably making gym weights
Pls. Send a plan
Unfortunately, I did everything without a blueprint
Wie komme ich an die Bauzeichnung?
Leider habe ich keinen Entwurf. Ich habe mit Materialien gearbeitet, die ich hatte.
Ich übersetze aus dem Kroatischen mit Google Übersetzer.
What HP was the motor you used?
It's an engine from the Drill Press. 0.5 HP
Hi i am iranian and i enjoy this video but i cannot download pdf plan beacuse in iran we cannot have c cart please help me thanks
I don't have a PDF plan. If you mean a link it is an Internet site where the transmission ratio calculation is done.
Why do knives fascinate some people?
AC/DC ............bravo majstore!!!
:)
inspiring me..
Has any cracking appeared on your floor? Is the floor reinforced in any way?
My house has 5 floors. My workshop is in the basement. I have a good concrete foundation. There are no cracks. If you have a weak surface, the floor may crack because the vibrations are quite strong.
Do you sell the blueprints?
Unfortunately I don't have a blueprint. It's all in my head.
@@diyguru1 how much would you charge to make me one?
That is not my profession. It's my hobby.
@@diyguru1 okay thank you anyway
👏👏👏👏👏
Mistrz !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!...
Please tell pipe thikness
6mm
Sir which motor use in the machine tell the capacity pls
It's an engine from an old drill press. 0.7 HP (550Watt)
Thank u sir I'm from India I really to this it's very useful for me 👍👍👍👍
Your video gave me some idea's, a little SLOWER and some measurements should have been nice.
Koliko košta ova alatka
To sam za sebe radio. Materijal koji sam kupio me koštao cca 50 Eura. Kotač od stare auto prikolice, motor od stare stupne bušilice.