Complete Network Configuration | DTP, VTP, EtherChannel, OSPF, NAT, VPN, STP | All Protocols
HTML-код
- Опубликовано: 29 сен 2024
- Hello, Welcome to PM Networking...
My name is Praphul Mishra. I am a Network Security Engineer by profession and a Certified Cisco trainer by passion.
About this video:-
Complete Network Configuration | DTP, VTP, EtherChannel, OSPF, NAT, VPN, STP | All Protocols
CCNA Configuration Playlist:-
• Basic Network Configur...
CCNA Topics Wise Lecture:-
• CCNA Topic-Wise Course
Interview Questions and Answers:-
• Networking Questions w...
Cisco Basic Configuration:-
• CCNA (Routing Switchin...
BGP Series:-
• BGP-CCNP
Our Social links:-
RUclips:- / pmnetworking
Facebook:- / pm.netwoking
Instagram:- / pm.networking
Telegram:- t.me/p_m_netwo...
Whatsapp:- wa.me/918511826341
#ccna #newccna #cisco_certification #computer_networking #cisco_networking #ccna_routing_and_switching #ccna200_301 #network_engineer #cisco_routing_and_switching #pm_networking #ccna_exam #computer_network #computer_networking #network_engineer #ccna_full_course #ccna_certification #ccna_exam #cisco #ccnasallary #ccna_security #network_security #cisco_routers #cisco_switch #ccna_salary_package_in_india #ccna_2022 #new_ccna #ipv4 #ipv4 #osi_model
28:25 A tip: in the Taskbar options, if you select "Never" under the "Combine taskbar buttons", it'll show all windows as if they were tabs on a browser.
Thank You So Much
If ASA is implemented here, tutorial would have been even great .all in one 😊
Ohhh, yes
0:01 Topology overview
4:39 PCs configuration
7:54 Vlan
10:25 Trunking, DTP
12:16 VTP
15:21 Layer 3 Etherchannel
19:11 SVI
23:35 HSRP
31:49 switchport as routed port
33:30 R1 config and OSPF
40:48 PAT
46:10 Default route
48:19 basic configuration on remote site(OSPF & PAT)
53:56 VPN
1:00:00 sharing routes over tunnel
Thank you very much
@@PMNetworkingthats not all protocols
STP????
Spanning Tree Protocol@@kidchannel5796
Thank you so much sir for making very knowledgeable video. Which covers all configuration. I have seen many types of video on RUclips. But this video very helpful my all doubts clear how network work and rech internet❤
Thanks for sharing feedback
what lab thx for it. plz do such more complicated labs. god bless u
Sure and thanks 😊
Thanks for sharing your knowledge.
My pleasure!
Thank you very much ❤
You're welcome 😊
Great sir ji thanks 😊
Welcome
Thank you for your explanation. how much salary in your country ?
Awesome guro ❤
Thanks
great project
Thanks for appreciation
31:20 if anyone face issue with inter vlan routing. make sure enable "ip routing" on distribution switches.
Thank you. Worked
Specify switch n router names in lab sir R1,R2...SW1 OR CORE SW
Devices name are visible bro
Hello Praphul Mishra
Good morning
Could you make the network topology available with the configuration files, so that you can do the configuration from scratch, please?
Noted
What will be the configuration if i want those different access switches for different departments (i.e. Management, Sales, Admin, IT) not with vlan but with physical IP and VLSM ?
Expecting your early reply, TIA.
I will make one video on it
I like this vedio ,,well explained and i will heat the subscribe button ❤
Thanks for appreciation
What os are you using for the access switch? Do you mind sharing this?
IOL
Great video, thanks.
Glad you liked it!
my man! this was complete lol
Hello Dear Sir, Why you have a configured the VTP on all the switches
So that I we propagate vlan information
Good Job, please how can we get the OVA of this topology?
You have to design it in your system or you can buy access to our server
Thanks brother .plz do a topology with two DHCP router in two core switches
With And failover three tier architecture plz ❤
Noted
podrias hacerlo en el packet tracer?
Thank you! How can i learn VRRP protocol for redundancy?
Check VRRP video on my channel
Hi Sir, Here on core switches , you did not configure trunk mode or encapsulation dot1q . ? doesn't it need ? what does it actually do sir?
It's a layer 3 etherchannel, not a layer 2. You cannot trunk a routed link.
Hello. Is there somewhere we can get this lab for download?
Sorry that’s not possible
What program is that? I am looking for something that can imitate this topology
Eve-ng
Could you share link OS: router, switch L2 & L3 to me for download?
ruclips.net/video/kOyDF5UeAJ0/видео.htmlsi=Xu0dH0MDByIoO3jN
Woa 😧
Thanks
Can you share the lab file?
I have deleted it
Can you share this lab file.?
Not available now
Clark Kimberly Hall Lisa Harris Timothy
This is Superb. What's the software you use to simulate this setup?
Configure DHCP Server Plus Inter-VLAN Routing on a multilayer switch
Configure Cisco router as DHCP server Plus Inter-VLAN Routing on a Cisco multilayer switch
Understanding DHCP Server Router Configuration Plus Inter-VLAN Routing on a Cisco multilayer switch
How to Configure DHCP Server Plus Inter-VLAN Routing on a multilayer switch
How to Configure DHCP Server Plus Inter-VLAN Routing on a Cisco multilayer switch
DHCP Plus Inter-VLAN Routing on a Cisco multilayer switch configuration using Packet Tracer
Cisco CCNA DHCP Server with Inter Vlan routing
Inter Vlan Routing with DHCP
Could you please make the explanation in such a way that it's easy for both me and others watching the video to follow? It would be helpful if you share the concept you're configuring in clear theoretical terms, along with the graph or visual explanation you’ve provided. This way, we can understand both the theory and the visuals better. This structure would be beneficial for both us and you when referring back to any video.
Thank you for understanding!
Noted ✅️
Hi all, I came across this video and it has been so helpful, but I have an issue pinging from DSW1 to DSW2 after configuring the etherchannel on the switches. I will be happy if someone can help. Thanks.
Check Port-channel is up or not
Thank you so much for this video... I have try to configure this topology, but I have a problem... I have created the vlans on access switches, but I don't know , why they did not create automatically in Distribution switches? what is the problem?
There are lots of possibility, check trunking, vtp domain name, version,mode and cr number
I rarely like any video, and tbh this video makes me to hit the like button....good work !
Thanks Bro
hello I am from cambodia.
I want to use it can you give me sources Image eve switch layer 3 , switch layer 2 router and server image .Thanks I like your video
ruclips.net/video/kOyDF5UeAJ0/видео.htmlsi=q6IsGk2fTDLg8omO
Which iou you have used for access switches and then for distribution switches????? When you again used HSRP on switches do you know you have cut down the flow of traffic from whole one distribution switch, by standby it will not take any traffic unless your primary switch goes down, that's why for router it's ok for switch you have cut the whole chunk of traffic in distribution layer???
Can anyone plz mention how to get that server icon...i uploaded switch and router image to eve Ng.
you for sharing your knowledge so that I can repeat it again
Can you please upload ios for this router and switches please.. Please share google drive
Can you please mention how these server images and all getting in eve Ng...I have only switch and router
Trunk links should be configured on switches that need to carry traffic for multiple VLANs, typically on switches that connect to other switches (uplink ports) or to network devices like routers or servers. These switches are often referred to as distribution or core switches in a network topology.
Access switches, which connect end-user devices such as computers, printers, or IP phones, typically do not need trunk links because they only need to carry traffic for a single VLAN (the VLAN assigned to the end-user device). So, trunk links are not typically configured on access switches. Instead, access ports on these switches are configured with the appropriate VLAN membership.
However, in some cases, access switches might have trunk links if they are connected to other switches for specific purposes, such as connecting to another switch for redundancy or connecting to a switch in another building or location. But in general, trunk links are primarily configured on distribution or core switches in the network.
technically what is the function of portchannel 10 ?
Combining multiple links
How did you make the ' internet node " configuration ?
Only ip addresses is configured there
Thank u so much for making such kind of very knowledgeable video, which covers all the configuration.. it cleared all doubs from how network work and reach to internet
It's my pleasure
I followed the instructions exactly but I’m having issues on the ether channel portion. I’m not able to get the two distro switches to ping each other and I’m not sure why. Using GNS3
Check port channel is up or not
@@PMNetworking thanks for responding. Port channel is setup and everything appears to be correct on both switches. I’m starting to think it could be related to something either way gns3 itself. I’m just not sure what at the moment.
Yaa, may be
and last but not least VOIP ...
Already there on channel
in this simple network, we do not need to configure ospf.
You can avoid
Superb video i have got to know many concepts in single video
Informative and easy to understand content. 👌✌️. Please keep it up Sir
Keep watching
Great video! Make more with this quality and viewers will come! A quick question:
Why didn't you configured OSPF between SW1 and SW2 (the 11.1.1.0/24 subnet) in your Etherchannel?
And why are you in favor or against doing this? Can you elaborate a little?
You can configure for more reliable and ignore it for better cpu management
AWESOME VIDEO THANK YOU!!!!!
Glad you liked it!
Hello Dear,
i was looking for the eve-ng file topology you built please share with me.
How to Design a Hybrid Network Architecture for Outsourced Data Centre Backup
Please make video on this topic
Noted
STP????????????
How did you use different subnet
Subnetting
Bro your teaching is good but your not showing proper which switch is configring A side or B side
great tutorial . What is the simulation you use here ? . is it better than packet tracer ? thank you so much
Eveng
Awesome man, Thanks for sharing a beautiful content. Can you also make a video about BGP related configs please?
Please check BGP playlist
Can you provide the switch's iOS? Please
Please check eveng setup video, in the description of that you will get link of switch
@@PMNetworking Thank you very much, I will test it out and then provide feedback
Wish you do another one please using cisco CML. Thanks.
Firewall should be involve
Yes
is there any file to use this lap in my laptoop
No
Hello, could you provide the various images used in the network so we can build the network from scratch or can you share the default network so we can practice along? Thank you.
ruclips.net/video/kOyDF5UeAJ0/видео.htmlsi=Z6Xg29BhnwPtxL9K
Indians are Genius love you so much brother from Ethiopia
Thank you for sharing
Most welcome 🙏
Nice topology @PM Networking. I don't see any router redundancy. that would be great if it was also implemented. (like Vrrp , hsrp )
Ok sure, I will do it
hello i need to come fixed my eve because i dont now how
The very same configuration with ipv6 would be fantastic!
@@romain3568 Noted
Dear Tutor,
How much RAM is needed to run this type of topology in EVE-NG ? Just 16 GB or 24 GB enough?
16gb
Which terminal r u using sir??
Eveng
I have a question. What protocol does your VPN run on? Thanks.
I have to check it
Do you have a packet tracer version of this so we can practice?
Thanks for sharing your knowledge
Sorry, no
Thank you for the thorough video! I was looking for something like this for a while now. One question: 15:58 is there a reason why you first shut all interfaces?
This is recommendation that when you configure ether channel, first you should shutdown the interfaces
@@PMNetworking Thank you!
It's simply a best practice in case u dont want to negotiate some automatic protocols with your neighbor.
To be more clear. You don't want any kind of trafic out of the port-channel until you finish the full configuration. If you already have configured the other side of etherchannel with Active, desirable or on Imagine what would happen. The traffic would be send out the etherchannel After the command: channel-group id mode xxxxxxx. For security purpose this is bad and you want to avoid It!
@@LakedaimonII
I see. Yes, that makes sense. Thank you for taking the time and effort to write this thorough response!
I'm not a fan of VTP, but thanks for this very cool lab. I also added DHCP for the clients for extra fun.
Great to hear!
How much ram required for this lab
16 gb
I wish I knew about this video before! Subscribed!
thank you :) please make a SD-WAN video in eveng. your videos are very helpful. wish you all the very best.
Thank you, I will
Can you pleese make a multicast topologie😢😢
I will create a separate playlist for multicasting.
@@PMNetworking thank you so much
Best of bests. I liked tutorial and the way it prepared is also great.
Thanks for appreciation
@pm , May I know which software you are using?
Eveng
Thanks for sharing this amazing content. Please, I'm a litle bit confused about the inter-vlan routing, is that necessary to have HSRP configured so that it works ? And I noticed you didn't enable "ip routing" on MLSWs, and I bet that was the issue!
Yes, correct
why we not used pre-empt either SLA track didn't done a failover test
Ok let me check
sir , in this video you have not configured the STP or RPVST right ? . or do i miss that ?
Yes,
What are the resources required to run your eve lab as far as cpu, ram, disk etc?
16gb ram
Can you share the link for both L2 and L3 switch images you are using? Thank you.
ruclips.net/video/kOyDF5UeAJ0/видео.html
Hi
Please make video on mac acl binding on switch 350
Noted
hi thank you for the video
please can you confirm the image you used for the L2 and L3 mine doesnt work in configuring the etherchannel
found the issue, the newer images are buggy and etherchannel dnt work. tried with the image on eve website
ruclips.net/video/kOyDF5UeAJ0/видео.htmlsi=1-nEZrcPDAd8I_5M
Fantastic all in one LAB, Thanks bro!
Most welcome
is this WAN?
Yes
hi, thanks for sharing this video. appreciated.
just wanted to know what tool you're using for this. please let me know. and is it paid or free?
Eveng and its free
@@PMNetworking thank you.
This was going so well until you confused the NAT and Acess-list setup. can you please provide the config for the router with the NAT setup
Already available in channel
should have included a firewall. there is no fire wall
Yes
@@PMNetworkingexactly firewall should have been there
That's great and you are professional.❤❤
Thank you so much 😀
SIR , THANK YOU VERY MUCH FOR PRESENTATION
Most welcome
canu attach the packet tracer file
Pkt file is not available
@@PMNetworking do u have any packet tracer files ? that are large network
What is the software youre using for the topology?
Eve ng software name
wow sir wow
Thanks for appreciation 🙏
Legend.
Thanks 🙏