Biggest bowl I have seen turned! Great grain, too. I surely would appreciate Brad's products: The abrasive paste, the tung was and tung honey. Brad's workbench is marvelous!
Brad’s Workbench. The double feather and size of the blank make this absolutely stunning. I love cutting and turning blanks for the feather. Also, good choice of where you trimmed the edge of the blank to make the final natural edge. Thank you Hayden for sharing such a beautiful elm blank.
I've never turned Elm, but apparently I need to find some! Gorgeous. Great use of the Tung Honey finish from Brad's Workbench too. Thanks to Haden for making it possible.
That is an impressive piece! Liked how you turned the bark off - showed some real patience and talent. Using Brad's Workbench Tung Honey was an excellent choice for the finish.
Oh my… I forgot my comment earlier. Very nice piece. Really like the grain pattern where all three branches intertwine. Also a big plus with the live edge. Oh and the Monster Size! Brad’s Workbench 😊
Thank you for explaining the use of sanding sealer before adding AC glue to fill cracks. Also helpful was your explanation of the use of denatured alcohol. By the way. The bowl is amazing.
Brad’s Workbench! It’s amazing what a hunk of wood that would be split for firewood produces! Great job bringing out the beauty in this piece. I just received an order from Brad’s and am anxious to try it.
Thank you for watching, and good luck! I have a video on details of the lathe, and did a follow-up on a video of a pen recently that I talk about my dislikes.
Beautiful bowl, Daniel. Not only are the crotch grain and feathering great, but the figure around that inclusion adds so much too. Thanks to Brad's Workbench for sponsoring the drawing. Bill
Brad’s Workbench. With winter coming it would be great to get some wood honey to finish pieces inside the house rather than a freezing garage. Beautiful platter.
Thanks! This was my biggest, too. I have a larger piece of Pecan in the works now (started off at 27" diameter). Got it rough turned and now in the kiln.
Brad's Workbench This piece has some serious character! Love the feathering in the grain, the inclusions and the bug trails! Gorgeous piece! Thank you for always sharing these great videos my friend!!
Brad’s Workbench. Brad’s products look good. I loved the video because I was considering the Rikon 3040 and it was great to see you use the movable bed to turn an oversized piece. Chas
Brad’s workbench. Just curious - have you tried just using glue in the cracks and then a quick sanding - it will makes saw dust to cover the crack automatically and not need to use all of the CA. I prefer doing that over the ca.
Nice work. I couldn’t find it anywhere but what brand/model of face shield/respirator are you running? I have something that works but it’s heavy and clunky and I’m looking for something better. Thanks!
I can understand that! I have it in the description of some of my videos, but forgot to add it to this one. Here's the info! Powered Respirator I use: pekesafety.com/collections/respirators-and-dust-masks/products/cleanair-pro-hepa-papr-system?variant=39701921267790 I appreciate your feedback!
Brad's Workbench, Love this piece it came out so well. I am really liking this Rikon lathe as well looks like it is pretty versatile in the pieces you can turn on it. Whats the name of the engraver you use?
Brad's Workbench.
Thank you for the shoutout! that turned out perfectly!
Thank you, Hayden! Thank you SOOOOO much for the piece! And good luck!
Biggest bowl I have seen turned! Great grain, too. I surely would appreciate Brad's products: The abrasive paste, the tung was and tung honey. Brad's workbench is marvelous!
Thank you, and good luck!!!
That Brad’s Workbench finish is awesome! Great turn this week Daniel.
Thank you, and good luck!!!
One of your best pieces my friend.
The feathering is amazing.
Take care Daniel.
Cheers, Huw
Thank you, Huw! I appreciate you!
I’m truly blown away by this one!! It really is breathtaking!
Brad’s Workbench
Thanks, Seth! That feathering really got me! Good luck!
Exceptional piece with the help of Brad’s Workbench.
Thanks for the feedback, Victor! Good luck!
Beautiful piece!!! Brad's Workbench.
Thank you very much! Good luck!
Absolutely amazing grain!
Brad’s Workbench makes great products.
Thanks for that feedback, Stuart! Good luck!
Awesome piece
Love Brad’s workbench
Thank you for the feedback, and good luck!
Brad’s Workbench. The double feather and size of the blank make this absolutely stunning. I love cutting and turning blanks for the feather. Also, good choice of where you trimmed the edge of the blank to make the final natural edge. Thank you Hayden for sharing such a beautiful elm blank.
Thabk you the feedback and support! Good luck!
Brads work bench makes great products-this crotch piece is stunning!
Thank you very much! I appreciate the feedback, and good luck!
Beautiful! Thanks for sharing. Brad's Workbench
Thank you for the feedback, and good luck!
Just a magnificent piece of wood done right so nice
Thank you, Uncle Rob! I appreciate you!
Wow what a beautiful piece of wood. You did a wonderful job.
Thank you for the feedback! It is definitely appreciated!
Looks amazing with the third branch.
Brad’s Workbench
Thank you, Clyde! Good luck!
Great use for the crotch! And the finish from Brad's Workbench did an amazing job. Beautiful piece!
Thank you, Jeff! Good luck!
That is certainly a huge bowl you have made Daniel, I really like the wood grain and the finish you gave it.
Thank you, Hans! I appreciate that!
Brad's Workbench
Thank you, and good luck!
Wow super well done Double D! It turned out great! 😃
Thank you, Val! I'm glad you like it!!!
That's an awesome piece! Great work DD
Thanks, Jiggsy! I am glad you liked it!
Brad's Workbench
Beautiful piece, Daniel! That's the yellowist Elm I've ever seen! But it's gorgeous!
Smae here, Billy! I appreciate the feedback, and good luck!
I've never turned Elm, but apparently I need to find some! Gorgeous. Great use of the Tung Honey finish from Brad's Workbench too. Thanks to Haden for making it possible.
Thank you, Tony! It doesn't smell great while turning, but definitely finishes nicely! Good luck!
Great work! Brads Workbench
Thank you, Ross! Good luck!
That is an impressive piece! Liked how you turned the bark off - showed some real patience and talent. Using Brad's Workbench Tung Honey was an excellent choice for the finish.
Thank you for the feedback, I am glad you appreciated the piece! Good luck!
That is an absolutely beautiful platter. Thank you, Hayden for giving it for all to enjoy.👍👍
Thank you, James! I appreciate your feedback!
Brad's workbench ..love the grain
Thank you for the feedback! I absolutely love the feathering in this piece! Good luck!
Nice project. Brad’s Workbench
Thank you, and good luck!
Very beautiful. Really nice lathe. That moveable bed is really cool … Brad’s Workbench
Thank you, Mike! Definitely like the smaller footprint this lathe has while not sacrificing turnable length!
Good luck!
Sounds like a lot of good products come out of...
Brad's Workbench
😉
ROFL, Jack! They definitely do!
Oh my… I forgot my comment earlier. Very nice piece. Really like the grain pattern where all three branches intertwine. Also a big plus with the live edge. Oh and the Monster Size! Brad’s Workbench 😊
Thanks! Always appreciate your feedback!
Thank you for explaining the use of sanding sealer before adding AC glue to fill cracks. Also helpful was your explanation of the use of denatured alcohol.
By the way. The bowl is amazing.
Thank you for the feedback and kind words! I try and share any knowledge I gain, as I figure it will help others!
Yep. That third wheel is always a problem. Lol. Looking good so far.
Hahaha, thanks Clyde!
Beautiful as always mate!
Thank you for the feedback! Much appreciated!
Beautiful work bud.
Thank you very much!
Brad’s Workbench! It’s amazing what a hunk of wood that would be split for firewood produces! Great job bringing out the beauty in this piece. I just received an order from Brad’s and am anxious to try it.
Thanks, and good luck! It isnsome great finish!
Brad's Workbench making it work.. Know your going to talk more about the Lathe!
Thank you for watching, and good luck! I have a video on details of the lathe, and did a follow-up on a video of a pen recently that I talk about my dislikes.
Beautiful bowl, Daniel. Not only are the crotch grain and feathering great, but the figure around that inclusion adds so much too. Thanks to Brad's Workbench for sponsoring the drawing.
Bill
Thank yoi, Bill! I appreciate the feedback, and good luck!
Brad’s Workbench. With winter coming it would be great to get some wood honey to finish pieces inside the house rather than a freezing garage. Beautiful platter.
Thank you very much! Finishing in the cold is quite unpleasant, so I agree with you! Good luck!
Very nice. I haven’t made anything nearly that big.
Thanks! This was my biggest, too. I have a larger piece of Pecan in the works now (started off at 27" diameter). Got it rough turned and now in the kiln.
Brad's Workbench
This piece has some serious character! Love the feathering in the grain, the inclusions and the bug trails! Gorgeous piece! Thank you for always sharing these great videos my friend!!
Thank you, my friend! I appreciate the feedback, and good luck!
Stunning piece, Daniel. Would make a fabulous Thanksgiving centerpiece. Nice job with the Brad's Workbench products.
Thank you, John! I agree on the centerpiece part! Good luck!
Brad’s Workbench.
Brad’s products look good.
I loved the video because I was considering the Rikon 3040 and it was great to see you use the movable bed to turn an oversized piece.
Chas
Thanks, Chas! Definitely an awesome feature! Good luck!
Here’s the shout to Brad’s workbench 🥳
Thank you, Mike! Good luck!
Brad's workbench!
Thank you, and good luck!
very nice!
Thank you, Dave! I appreciate the feedback!
Nice!
Thank you kindly!
Beautiful bowl like the Phil Anderson slip. Brad's workbench would be a nice package for my small shop, I been using Odles oil but that is expensive
Thanks, Arnold! Phil does awesome stuff for sure! Good luck!
Brad's Workbench. Would like to try it.
Thank you for watching!
Great piece the relative sallow bowl showcases the crotch figure better! Not to mention the Brad’s workbench😮
Thank you for your feedback, and good luck!
Brad’s workbench. Just curious - have you tried just using glue in the cracks and then a quick sanding - it will makes saw dust to cover the crack automatically and not need to use all of the CA. I prefer doing that over the ca.
Good luck!
I have not done that before, but will certainly give it try down the road! Thanks for the feedback!
Brads Workbench.
Thank you, and good luck!
Nice work. I couldn’t find it anywhere but what brand/model of face shield/respirator are you running? I have something that works but it’s heavy and clunky and I’m looking for something better. Thanks!
I can understand that! I have it in the description of some of my videos, but forgot to add it to this one. Here's the info!
Powered Respirator I use:
pekesafety.com/collections/respirators-and-dust-masks/products/cleanair-pro-hepa-papr-system?variant=39701921267790
I appreciate your feedback!
Very nice! What is the make and model of your handheld laser etcher? Thank you!
Thank you, Fred! My laser engraver is the LaserPecker 2, and I love it!
Brad's Workbench, Love this piece it came out so well. I am really liking this Rikon lathe as well looks like it is pretty versatile in the pieces you can turn on it. Whats the name of the engraver you use?
Thank you, and good luck! I use the LaserPecker 2 engraver.
Bela peça parabéns
Thank you for the feedback and for watching!
What kind of laxer do you use to make your brand on the bottom
I have the LaserPecker 2.
❤
Thank you, Aunt Bee!
1st😂
There's the Huw we all appreciate!!!!
Yes!
@@williamellis8993 Afternoon Bill
Brad's Workbench . UK.
DD that platter looks Superb, well done 🙌🙌🙌🙌.
Thank you, Sir! Unfortunately we cannot ship to the UK currently, but I appreciate the feedback!
Brad's Workbench
Good luck!
Brad's Workbench.
Thank you, and good luck!
Brad's Workbench.
Thank you, and good luck!
Brad's Workbench
Thank you for watching, and good luck!
Brad's Workbench
Thank you, and good luck!
Brad's Workbench
Thanks for watching, and good luck!
Brad's Workbench
Thank you, and good luck!
Brad’s Workbench
Thank you, and good luck!
Brad’s Workbench
Thank you, and good luck!