@Because Stuff Breaks with Justin Peters don't know if you ever figured out how to get back panel off but if not, once you get to the step to take back rollers off go to back of dryer it's like 5 screws take out come back to front that whole panel lifts up and out super easy to remove with impact drill and crescent. Those things are in super tight. Also this is the BEST VIDEO for this repair I found thanks man
Thank you very much! After a frantic call from my daughter telling me her 2nd floor washers was flooding, I found small piece of tubing attached to the tub had slipped off. That’s when I learned of her EXTREMELY noisy dryer. I found your video, got same day delivery of parts from Amazon and within 24 hours completed the repair. Your video was excellent. I plan to add your suggested links to my regular devotional time, Brother. 👍
Thank you very much for this precise video. The way you placed the camera in the back to capture the positioning of the belt while working from the front of the machine was fantastic! Thanks again for the practical video and for sharing your knowledge.
Thanks for this video. The instructions were so clear that even an engineer could do it! I was able to replace the very noisy rollers, and saved a lot of money. My wife was so happy that she made a fancy dinner for me!
What are 2nd set of 3 screws behind door exactly for. My dryer does not have them. You took 2 out near lint trap and 1 from the top. Mine had no screws. And do screws go thru part of lint trap plastic because I used my own screws. (Slightly longer) 😬
Best DIY video I've ever seen! I followed every step and got the dryer working. The hardest part was getting the belt over the tensioner and being "blind" didn't help. Thanks so much for this video!!
The camera view at 14:57 was very helpful! Thank you so much for this video. I was able to reattach my loose belt in about 30 seconds because I could see exactly what I needed to do.
So happy I found your video. I knew something was up with my noisy Samsung dryer that would sometimes make a buzzing/humming noise when I started it without the drum spinning. I would open the door and manually spin it a bit and it would work again for a few days to weeks. Yesterday was it though and I searched the RUclips for videos. I have already changed the heating element so was hopeful I'd find easy to follow instructions for whatever was wrong this time. So grateful for this video...clear and easy to follow instructions given during your video made this a breeze! I even ordered the part you listed from Amazon yesterday, received it this afternoon and my dryer is working again!! THANK YOU!
I watched your video several times before starting. Thanks to your warning about the sharp edges, I had my gloves on and prepared. I did price the repair kit on Amazon but I chose to buy local from a small parts store even though it cost more. I try to support small businesses when I can. Your instructions were simple but specific where I did not have to question each step. I did have to get my son to get the wheels off for me, they were really stuck on. With our team effort, our dryer is up and running and not making any squeaky noise. And it got a good cleaning out. Thank you for taking the time to shoot this video. SLS Tue Aug 2, 2022
Really the best video I have found to do this dryer repair. Very common sense and straightforward. Couldn't get an appointment for several weeks and was almost ready to go to the laundromat to dry my laundry. But this video encouraged and enabled me to do a successful injury and problem-free repair!
Best video for getting this Samsung model repaired. Simple and easy steps and the best part is the clarity and depth in reassembly. Thank you very much for this video. Helped a lot in not just getting the belt replaced but also tuning the rollers.
Excellent video. Perfect level of detail. For example, the reference to which screw has the lock washer. Appreciate the continuing on with reassembly rather than just "reverse the previous steps". Also, the warnings on sharp edges. Nicely done. Incredibly helpful. Thanks.
Thanks a ton, that shot showing the way you route the belt around the tensioner saved me so much time and headache after I reassembled my dryer (did it on my own before finding this video) to find the control panel worked but it wouldn't actually start the cycle. Routed the belt correctly after watching your video so that the switch was in the correct position, and it worked right away. Thanks again!
Justin - I watched and used many repair instructions. This is could be the best, most detailed, and properly paced of all I've seen. Kudos for amazing job!
Comments are 2yrs old but I have this exact dryer and this video tutorial was, step by step, spot on. Used Amazon replacement parts and I was done in a little over an hour since I also cleaned as I went along. The only small difference was that, the replacement bolts that came with the new rollers were slightly smaller on the wrench side. Thanks for the video!
Just changed the rollers and pulley on my dryer. With my wife as foreman and your video as our manual it is working smoothly once again. Thank you so much for your video and thank you for filming it so well and explaining every step.
THANK YOU! My husband and I tag teamed this project and got it done in no time! We are by no means newbies to DIY projects but this had a lot of steps that seem daunting to the unaware. You broken it down simply and easily! 3 of 4 bearings were worn and burnt. 😬 strap was wearing thin too so it was just a matter of time before the whole thing kicked the bucket. Cut the side of my hand just barely (you werent lying about the sharp parts) but, otherwise, we kicked ass! There was a tiny, slight buzzy noise when it FIRST started that slowly dissipated after about 10 min of running. Thanks to you, my house wont catch fire because of my janky dryer. 😂
Hey dude. This DIY saved me about $500 to fix or shopping for a new dryer! Directions were great. The only big problem I have was putting that belt back on the rollers other than that everything was perfect! Thanks a lot really appreciate the information. Peace and blessings. Have a fantastic day!
Very well done video! I used it to access and troubleshoot my dryer, then used your parts link to get the parts needed for repair. To lube the shafts of the new roller wheels and idler pully, I used a very thin film of high temp resistant grease for brake caliper pins to make them spin more smoothly. To help keep all of the similar but not identical screws straight, used a strip of refrigerator seal magnet material & lined 'em up left to rt as I took them off. This made re-assembly 2 days later very easy with no guessing about which fastener went where.
Excellent videos! You have my exact Samsung dryer and I was worried this would be much more intense and not worth the time. Watching your videos saved me having to get rid of this dryer and find and pay for another one. Thank you thank you!
I just want to say a big thank you for showing how you sat down and put the belt on the pully. My dad and I wasted 2 hours trying to figure it out. So VERY thankful I came across your video!! ♡
I watched so many videos where the creator blocked, didnt show, showed an awful or dangerous example of how to get the belt onto the tensioner. I didn’t think it was possible from the front because I couldn’t see it. But I didn’t need to see it after I saw you do it. Thank you, Justin! After I got my dryer put back together - I replaced the belt, the idler pulley, all four rollers, the fuses, and the heating elements - I remembered to sweep my dryer vent before putting it back in its home. HOLY CROW! (Love Norm MacDonald) I thought I was going to need to replace my sweeper with a weed eater or a chainsaw. As the lint was flying past me, clouds of it hanging in the air, I realized that I had forgotten to do this for 10 years! It was so compacted, it took me over an hour and 20 trips up and down from the roof with different tools to clear it out.
This is a super helpful video! I thought I would have to do everything from the back, but I quickly learned that was not the case. Your video was very helpful and allowed me to fix the issue quickly. It is much appreciated!!
Brother, thanks for the help. This is a really in depth and detailed maintenance video on how to fix this dryer. This is the 2nd time I have replaced the rollers (1st was in 2019). I have also replaced the heating element in the same drier. I couldn't get to the back rollers (I'm older and not as flexible as I use to be), so I removed the 7 screws from the back making it super easy to change out the back rollers. Thanks again, and God Bless!
I,was trying to figure out how do you put tension on dryer Samsung belt by watching your step by step i,figure out to put tension on belt after 2 days working on it thanks for your knowledge and simple explanation BIG Thanks again.
This video was so helpful. Your step by step guide was so helpful. The shot from the back on how to get the belt on rocks! I’m going to check out your other video’s. Thank you so much!!!😊
Thanks so much for making this video! When I started thinking about how I was going to get the belt on the pulley without really seeing it, I really thought it would never happen. However, that camera angle you had was spot on! Thanks again!
This video is perfect! I got my dryer components changed out in about 10 minutes, including the time to play/pause this video. The only difference is I put the belt around the motor first then around the pulley. It was easier for me this way. Otherwise great video and thank you!
This video saved me the cost of a new dryer - thanks very much. Surprisingly, the hardest part was step 1: open Lid. I needed to putty knife it open. Outside that the rear wheel rollers came out ok without much force or needing to pull off the back panel. My far right back wheel had the bearing melted into (completely gone) and the wear was so bad it most likely would’ve snapped off soon. Pully was also half missing, but somehow belt was working still. Unfortunately I have to take another step and replace the felt on my drum(it’s torn). Repair guys will charge you for a new drum at $500. The price of felt and glue is $60. I assume the heater will go next on me - but one step at a time. Thanks very much !!
Thanks for this video, saved me hundreds and it worked just as you described. Actually nothing was wrong with our dryer, it was vibrating really loud, I think the fan was just full of lint. Rollers and belt looked like new. Thanks again!!
This video was incredibly helpful! I had one of the roller wheels seize and break, and this helped me install a repair kit, including new wheels and belt.
Outstanding! I dub thee “Red Beard, Black Socks repair guru.” Tackling this exact job as soon as the parts arrive this afternoon, and thanks to you I do not have to guess at what screws to take out!
So I just finished replacing two of the four rollers for the drum…I could not budge the two in the back. Luckily one of the two front rollers were the bad ones and with the drum off, I replaced the heating element. So much more easier with the drum off! Thank you for your video!
Extremely helpful. I highly recommend putting this video in front of you when reattaching the belt to the drum from the front of the dryer, and you can't see what your hands are doing. Good for visualizing what you can feel but can't see.
Excellent video, you could give classes on making RUclips videos (please do, they need help). Replaced my belt and rollers on my Samsung that was groining when it turned. One back roller had completely lost the inside bearing. Your directions were clear cut, precise and a bit entertaining. Now works like a charm, my thanks.
Perfect video. Despite having a different model (Samsung DV45K7600EW/A3), this video and the components were similar enough to do the belt and pulley replacement. Superb job!
I’ve replaced my heating element a few times, not an Samsung brand part, but super cheap part, now it’s time for the rollers. Dryer makes a loud squeaking sound..thank you for your video!
2 screws at the top and 4 screws behind the unit released that back plate to release the back rollers. It took me 5 min. Thank you for this video. It was perfect!
Thank you for this video lol I had to replace my heating element again but after seeing this, it was so much easier to just take out the drum and clean the machine out and have full access.
Awesome video. My sister asked if I could change her belt or actually just fix it or she would probably just buy a new dryer. Well, I wasn't sure I could, but after watching this video and seeing that the parts were pretty inexpensive, I decided that it would be worth it to try. Worst thing that could happen is she buy a new dryer ( which she is considering now). Well ordered the kit so will see how it goes. I'm sure I'll get it done thanks to your instruction. Thanks
This is the best instructional video I have ever seen. Mine ended up being the plastic belt pulley, I'm waiting on my kit to arrive and it should be an easy reassemble. I'm also going to check out some of your other links on Christianity and plan on sharing some of those.
@@becausestuffbreaks My parts arrived and I reassembled everything this weekend, the part about how to thread the belt around the pulley was especially helpful!
I used your video to replace the rollers and tensioner pulley. Great job on making this video! Step by step instructions was clear on what to do. With the cost of everything going up in Bidens reign doing this repair means I can now fill up my car with very expensive fuel! Thanks to Biden. Thank you for helping me.
Thank you for this video! You did a great job explaining each step and the view of you putting the belt on the pulley was extremely helpful. I was able to do it myself in no time. Thanks again and God bless 🙏 ❤️
Great video! Thanks for the guidance and assistance. $30 replacement parts on Amazon and your tips did the trick to get my dryer working properly again. Very helpful!
YOU DA MAN! That had to be the best how to video I ever watched. Every thing exactly as you said. Great camera shot’s also. I bought the kit on Amazon for 30 bucks. Came with belt, tensioner and all 4 wheels. I subscribed to your channel. Thanks
I had a heck of a time trying to get the nut off the back roller on the bottom right. I ended up just taking the actual wheel off the shaft and using one of the new wheels. I slid the new one on and used the triangular-shaped fastener to re-secure it. I also added a small amount of grease to all the shafts. Worked like a charm. It almost amazes me how quiet it is now.
Thank you for this video. I have the same dryer except as gas and it had a horrible squeaking during operation. I was easily able to change out all the rollers and the belt after watching this. A great help.
Excelente trabajo y explicación, acabo de reparar mi secadora siguiendo los pasos de este vídeo muy bien explicado ⭐️⭐️⭐️⭐️⭐️ Muchas gracias 🙏 Octubre 2023
Thanks for the thorough instructions. It is easier to remove the back panel to replace the back rollers. There are five screws on the back of the dryer. And then you unscrew the heating element.
Great repair video. Found the the tensioner shaft/collar were rusted. This made the plastic roller come off. I was able to polish the two metal parts, press the plastic roller back onto the collar, grease, and get it all back together. It's running, at least for the short term. I will order a new belt and tensioner for the future.
Thank you so much man I got stuck on the belt part so I appreciate the fact that you did a doble split screen just to show how to do it thank you very much for that
Very helpful video. If you follow this video, you can do this in less than 90 min (including vacuuming out all the lint and dust). For mine, the nuts on the rollers in the back were very loose and the ones in the front were so tight they were hard to remove (Samsung should consider threadlocker and using a standard torque). You may have trouble tightening the ones in the back without removing the back (consider threadlocker, which helps prevent loosening caused by stress and vibration, if you aren't able to tighten the nuts fully).
Heaven and Hell are real places...for sure! Appreciate you prioritizing FAITH. I've got the exact same dryer, same noise, installed same kit following this video...went perfectly until I was nearing the final step, broke the door switch somehow, so now ordering one for $13 on Amazon. Took all precautions but still got bloody because I'm not handy with tools in tight places...at all. Dang near bought a new dryer instead. Got this one in 2014 and had no problems until recently. Thanks again for a really good quality video on youtube!!!
Awesome, very detailed video that simplified the mystery of appliance repair and definitely subscribing. Three appliance companies worked on my dryer for over a year and replaced every working part. Started with having to manually spin it to start on heavy loads. Then all loads, then started grinding and eventually locked up last time they worked on it. Helped me troubleshoot to learn my door front is now binding the drum when reattached so guessing it has to be a balance issue. Still haven't been able to correct it so lesson learned is stay away from Samsung.
Your clean, simple and step by step clips and explanation, makes this the BEST video on repair! Thanks & God Bless!!!
Awesome! Thanks for watching!
Thanks good dude like you I’m ordering parts right now
@Because Stuff Breaks with Justin Peters don't know if you ever figured out how to get back panel off but if not, once you get to the step to take back rollers off go to back of dryer it's like 5 screws take out come back to front that whole panel lifts up and out super easy to remove with impact drill and crescent. Those things are in super tight. Also this is the BEST VIDEO for this repair I found thanks man
@@chewchew719 great info! I'll have to try it. Thanks for watching!
This has to be one of the best step by step repair videos on RUclips. Thank you and have a blessed day!
You're welcome! Thanks for watching!
Thank you very much! After a frantic call from my daughter telling me her 2nd floor washers was flooding, I found small piece of tubing attached to the tub had slipped off. That’s when I learned of her EXTREMELY noisy dryer. I found your video, got same day delivery of parts from Amazon and within 24 hours completed the repair. Your video was excellent. I plan to add your suggested links to my regular devotional time, Brother. 👍
Awesome! Glad I could help. All glory to God! Thanks for watching!
Thank you very much for this precise video. The way you placed the camera in the back to capture the positioning of the belt while working from the front of the machine was fantastic! Thanks again for the practical video and for sharing your knowledge.
Glad I could help. Thanks for watching!
Excellent, sir!!!! I really appreciate your help 🙏!!! Muchas gracias ,señor, por ayudarme a reparar mi Samsung dryer 😊
You're welcome! Thanks for watching!
Thanks for this video. The instructions were so clear that even an engineer could do it! I was able to replace the very noisy rollers, and saved a lot of money. My wife was so happy that she made a fancy dinner for me!
Lol. Glad I could score you some points with the wife. Thanks for watching!
What are 2nd set of 3 screws behind door exactly for. My dryer does not have them. You took 2 out near lint trap and 1 from the top. Mine had no screws. And do screws go thru part of lint trap plastic because I used my own screws. (Slightly longer) 😬
Best DIY video I've ever seen! I followed every step and got the dryer working. The hardest part was getting the belt over the tensioner and being "blind" didn't help. Thanks so much for this video!!
You're welcome! Thanks for watching!
The camera view at 14:57 was very helpful! Thank you so much for this video. I was able to reattach my loose belt in about 30 seconds because I could see exactly what I needed to do.
Awesome! Glad I could help. Thanks for watching!
So happy I found your video. I knew something was up with my noisy Samsung dryer that would sometimes make a buzzing/humming noise when I started it without the drum spinning. I would open the door and manually spin it a bit and it would work again for a few days to weeks. Yesterday was it though and I searched the RUclips for videos. I have already changed the heating element so was hopeful I'd find easy to follow instructions for whatever was wrong this time. So grateful for this video...clear and easy to follow instructions given during your video made this a breeze! I even ordered the part you listed from Amazon yesterday, received it this afternoon and my dryer is working again!! THANK YOU!
Awesome! Thanks for watching!
I watched your video several times before starting. Thanks to your warning about the sharp edges, I had my gloves on and prepared. I did price the repair kit on Amazon but I chose to buy local from a small parts store even though it cost more. I try to support small businesses when I can. Your instructions were simple but specific where I did not have to question each step. I did have to get my son to get the wheels off for me, they were really stuck on. With our team effort, our dryer is up and running and not making any squeaky noise. And it got a good cleaning out. Thank you for taking the time to shoot this video. SLS Tue Aug 2, 2022
Awesome! Glad I could help. Thanks for watching!
Really the best video I have found to do this dryer repair. Very common sense and straightforward. Couldn't get an appointment for several weeks and was almost ready to go to the laundromat to dry my laundry.
But this video encouraged and enabled me to do a successful injury and problem-free repair!
Awesome! Thanks for sharing your testimony. Thanks for watching!
Best video for getting this Samsung model repaired. Simple and easy steps and the best part is the clarity and depth in reassembly. Thank you very much for this video. Helped a lot in not just getting the belt replaced but also tuning the rollers.
Glad I could help. Thanks for watching!
Excellent video. Perfect level of detail. For example, the reference to which screw has the lock washer. Appreciate the continuing on with reassembly rather than just "reverse the previous steps". Also, the warnings on sharp edges. Nicely done. Incredibly helpful. Thanks.
Thanks! Thanks for watching!
Thanks a ton, that shot showing the way you route the belt around the tensioner saved me so much time and headache after I reassembled my dryer (did it on my own before finding this video) to find the control panel worked but it wouldn't actually start the cycle. Routed the belt correctly after watching your video so that the switch was in the correct position, and it worked right away. Thanks again!
You're welcome! Thanks for watching!
Justin - I watched and used many repair instructions. This is could be the best, most detailed, and properly paced of all I've seen. Kudos for amazing job!
Thanks and thanks for watching!
Comments are 2yrs old but I have this exact dryer and this video tutorial was, step by step, spot on. Used Amazon replacement parts and I was done in a little over an hour since I also cleaned as I went along. The only small difference was that, the replacement bolts that came with the new rollers were slightly smaller on the wrench side. Thanks for the video!
You're welcome. Thanks for watching!
Just changed the rollers and pulley on my dryer. With my wife as foreman and your video as our manual it is working smoothly once again. Thank you so much for your video and thank you for filming it so well and explaining every step.
Glad I could help. Thanks for watching!
THANK YOU! My husband and I tag teamed this project and got it done in no time! We are by no means newbies to DIY projects but this had a lot of steps that seem daunting to the unaware. You broken it down simply and easily! 3 of 4 bearings were worn and burnt. 😬 strap was wearing thin too so it was just a matter of time before the whole thing kicked the bucket. Cut the side of my hand just barely (you werent lying about the sharp parts) but, otherwise, we kicked ass! There was a tiny, slight buzzy noise when it FIRST started that slowly dissipated after about 10 min of running. Thanks to you, my house wont catch fire because of my janky dryer. 😂
Lol. Glad I could help. I got a cut from this dryer, so I know from experience. Thanks for watching!
Great video! Husband was out of town and dryer finally died. I order parts on Amazon and did the repair myself. Working great. 👍
Awesome! Thanks for watching!
Hey dude. This DIY saved me about $500 to fix or shopping for a new dryer! Directions were great. The only big problem I have was putting that belt back on the rollers other than that everything was perfect! Thanks a lot really appreciate the information. Peace and blessings. Have a fantastic day!
Glad I could help. Thanks for watching!
Very well done video! I used it to access and troubleshoot my dryer, then used your parts link to get the parts needed for repair. To lube the shafts of the new roller wheels and idler pully, I used a very thin film of high temp resistant grease for brake caliper pins to make them spin more smoothly. To help keep all of the similar but not identical screws straight, used a strip of refrigerator seal magnet material & lined 'em up left to rt as I took them off. This made re-assembly 2 days later very easy with no guessing about which fastener went where.
Awesome! Thanks for the info and thanks for watching!
Excellent videos! You have my exact Samsung dryer and I was worried this would be much more intense and not worth the time. Watching your videos saved me having to get rid of this dryer and find and pay for another one. Thank you thank you!
You're welcome! I love that this dryer is super easy to fix. Thanks for watching!
I just want to say a big thank you for showing how you sat down and put the belt on the pully. My dad and I wasted 2 hours trying to figure it out. So VERY thankful I came across your video!! ♡
Glad I could help. Thanks for watching!
I watched so many videos where the
creator blocked, didnt show, showed an awful or dangerous example of how to get the belt onto the tensioner. I didn’t think it was possible from the front because I couldn’t see it. But I didn’t need to see it after I saw you do it. Thank you, Justin!
After I got my dryer put back together - I replaced the belt, the idler pulley, all four rollers, the fuses, and the heating elements - I remembered to sweep my dryer vent before putting it back in its home.
HOLY CROW! (Love Norm MacDonald) I thought I was going to need to replace my sweeper with a weed eater or a chainsaw. As the lint was flying past me, clouds of it hanging in the air, I realized that I had forgotten to do this for 10 years! It was so compacted, it took me over an hour and 20 trips up and down from the roof with different tools to clear it out.
Lol. Glad I could help. I used to put the belt on from the back because I was too lazy to take the front off. Thanks for watching!
This is a super helpful video! I thought I would have to do everything from the back, but I quickly learned that was not the case. Your video was very helpful and allowed me to fix the issue quickly. It is much appreciated!!
Glad I could help. I've probably fixed most problems you can have on this dryer. Check back if anything else breaks on it. Thanks for watching!
Third time watching this video. 2 belts and now rollers. You have the best video I've found anywhere. Great job.
Awesome! Thanks for watching!
Brother, thanks for the help. This is a really in depth and detailed maintenance video on how to fix this dryer. This is the 2nd time I have replaced the rollers (1st was in 2019). I have also replaced the heating element in the same drier. I couldn't get to the back rollers (I'm older and not as flexible as I use to be), so I removed the 7 screws from the back making it super easy to change out the back rollers. Thanks again, and God Bless!
Good info. Thanks for watching and all Glory to God!
I,was trying to figure out how do you put tension on dryer Samsung belt by watching your step by step i,figure out to put tension on belt after 2 days working on it thanks for your knowledge and simple explanation BIG Thanks again.
Glad I could help. Thanks for watching!
This video was so helpful. Your step by step guide was so helpful. The shot from the back on how to get the belt on rocks! I’m going to check out your other video’s. Thank you so much!!!😊
Glad I could help. Thanks for watching!
Thanks so much for making this video! When I started thinking about how I was going to get the belt on the pulley without really seeing it, I really thought it would never happen. However, that camera angle you had was spot on! Thanks again!
Glad I could help. Thanks for watching!
Just fixed my dryer because of your video. Your directions were very clear. I’m thrilled.
Awesome! Thanks for watching!
This video is perfect! I got my dryer components changed out in about 10 minutes, including the time to play/pause this video. The only difference is I put the belt around the motor first then around the pulley. It was easier for me this way. Otherwise great video and thank you!
I'll have to try that next time. Thanks for watching!
This video saved me the cost of a new dryer - thanks very much. Surprisingly, the hardest part was step 1: open Lid. I needed to putty knife it open. Outside that the rear wheel rollers came out ok without much force or needing to pull off the back panel. My far right back wheel had the bearing melted into (completely gone) and the wear was so bad it most likely would’ve snapped off soon. Pully was also half missing, but somehow belt was working still. Unfortunately I have to take another step and replace the felt on my drum(it’s torn). Repair guys will charge you for a new drum at $500. The price of felt and glue is $60. I assume the heater will go next on me - but one step at a time.
Thanks very much !!
Awesome job! Let me know what glue and felt you used. I haven't had to replace that yet.
DC97-07618A Dryer Drum Gasket Felt Seal Replacement by BAY Direct for Samsung Dryers Compatible Part Number: AP4453798 PS4218879 PD00025731 3998155
Thanks for this video, saved me hundreds and it worked just as you described. Actually nothing was wrong with our dryer, it was vibrating really loud, I think the fan was just full of lint. Rollers and belt looked like new. Thanks again!!
Thanks for watching!
This video was incredibly helpful! I had one of the roller wheels seize and break, and this helped me install a repair kit, including new wheels and belt.
Awesome! Thanks for watching!
Outstanding! I dub thee “Red Beard, Black Socks repair guru.” Tackling this exact job as soon as the parts arrive this afternoon, and thanks to you I do not have to guess at what screws to take out!
Lol. Let me know how it goes. Thanks for watching!
So I just finished replacing two of the four rollers for the drum…I could not budge the two in the back. Luckily one of the two front rollers were the bad ones and with the drum off, I replaced the heating element. So much more easier with the drum off! Thank you for your video!
Glad I could help. Thanks for watching!
Extremely helpful. I highly recommend putting this video in front of you when reattaching the belt to the drum from the front of the dryer, and you can't see what your hands are doing. Good for visualizing what you can feel but can't see.
Awesome! Glad I could help. Thanks for watching!
HUGE help, my friend! My old dryer's running better than ever right now thanks to your handy video. Much appreciated!!!
Glad I could help! Thanks for watching!
Excellent video, you could give classes on making RUclips videos (please do, they need help). Replaced my belt and rollers on my Samsung that was groining when it turned. One back roller had completely lost the inside bearing. Your directions were clear cut, precise and a bit entertaining. Now works like a charm, my thanks.
You're welcome! That's a good idea. I should make a how to on how to. Thanks for watching!
Perfect video. Despite having a different model (Samsung DV45K7600EW/A3), this video and the components were similar enough to do the belt and pulley replacement. Superb job!
Awesome! Thanks for watching!
Thank you... for the 2nd time. Utilized your video a couple years ago and needed it again. Appreciate the instruction and detail!
Awesome! Thanks for watching!
Thanks!
You're welcome! Thanks for the super thanks!
This the third time I fix my dryer n I always use this video n always gets the job done thank you
Awesome! Glad I could help. Thanks for watching!
I’ve replaced my heating element a few times, not an Samsung brand part, but super cheap part, now it’s time for the rollers. Dryer makes a loud squeaking sound..thank you for your video!
You're welcome! Thanks for watching!
2 screws at the top and 4 screws behind the unit released that back plate to release the back rollers. It took me 5 min.
Thank you for this video. It was perfect!
Thanks for the info. I'll look for that next time. I plan on keeping this dryer forever. I know the this thing inside and out.
Thank you for this video lol I had to replace my heating element again but after seeing this, it was so much easier to just take out the drum and clean the machine out and have full access.
Awesome! Thanks for watching!
Awesome video. My sister asked if I could change her belt or actually just fix it or she would probably just buy a new dryer. Well, I wasn't sure I could, but after watching this video and seeing that the parts were pretty inexpensive, I decided that it would be worth it to try. Worst thing that could happen is she buy a new dryer ( which she is considering now). Well ordered the kit so will see how it goes. I'm sure I'll get it done thanks to your instruction. Thanks
Let me know how it goes. Thanks for watching!
This is the best instructional video I have ever seen. Mine ended up being the plastic belt pulley, I'm waiting on my kit to arrive and it should be an easy reassemble. I'm also going to check out some of your other links on Christianity and plan on sharing some of those.
Awesome! I greatly appreciate it. All glory to God!
@@becausestuffbreaks My parts arrived and I reassembled everything this weekend, the part about how to thread the belt around the pulley was especially helpful!
@@rhettblair6769 glad I could help. Thanks for watching!
SAVE YOURSELF HUNDREDS ... I do not comment often .. This video makes the process very simple .. Great explanation ..
Well said. Thanks for watching!
Thank you so much. My brother in Christ I cannot express how much I appreciate this incredibly detailed video. You saved me $350. Thank you again.
Glad I could help a fellow Christian! Thanks for watching!
I used your video to replace the rollers and tensioner pulley. Great job on making this video! Step by step instructions was clear on what to do. With the cost of everything going up in Bidens reign doing this repair means I can now fill up my car with very expensive fuel! Thanks to Biden. Thank you for helping me.
Lol. Glad I could save you enough money to at least put gas in the car. Thanks for watching!
Thank you for this video! You did a great job explaining each step and the view of you putting the belt on the pulley was extremely helpful. I was able to do it myself in no time. Thanks again and God bless 🙏 ❤️
Awesome! Thanks for watching!
THANK YOU for the step by step slow and steady approach this project. So easy to follow along!
You're welcome! Thanks for watching!
Great video! Thanks for the guidance and assistance. $30 replacement parts on Amazon and your tips did the trick to get my dryer working properly again. Very helpful!
Awesome! Thanks for watching!
Aaa
YOU DA MAN! That had to be the best how to video I ever watched. Every thing exactly as you said. Great camera shot’s also. I bought the kit on Amazon for 30 bucks. Came with belt, tensioner and all 4 wheels. I subscribed to your channel. Thanks
Thanks and thanks for watching!
FANTASTIC video!!!! Step by step instructions were awesome. I had fun repairing it. Most of all saved a ton of money. GREAT WORK
Awesome! Glad I could help. Thanks for watching!
Great video! Even a 57 y/o lady can follow these instructions! Thank you!
You're welcome! Thanks for watching!
I had a heck of a time trying to get the nut off the back roller on the bottom right. I ended up just taking the actual wheel off the shaft and using one of the new wheels. I slid the new one on and used the triangular-shaped fastener to re-secure it. I also added a small amount of grease to all the shafts. Worked like a charm. It almost amazes me how quiet it is now.
Nice. Glad you were able to do that. Thanks for watching!
Thank you for this video. I have the same dryer except as gas and it had a horrible squeaking during operation. I was easily able to change out all the rollers and the belt after watching this. A great help.
Awesome! Glad I could help. Thanks for watching!
You did a great job of explaining and demonstrating the steps to completing this task. Thank you for sharing
Thanks for watching!
best and most detailed repair for this dryer. Very detailed for beginner's Thx
Thanks! Glad I could help.
Thank God! The way you did the fly wheel belt saved me! Two thumbs up!
Thank God indeed! Thanks for watching!
Excelente trabajo y explicación, acabo de reparar mi secadora siguiendo los pasos de este vídeo muy bien explicado ⭐️⭐️⭐️⭐️⭐️ Muchas gracias 🙏
Octubre 2023
Thanks for watching!
THANK YOU SO MUCH! I was able to fix our dryer and save so much money! I appreciate you!!!
Awesome! Thanks for watching!
Thank you so much for making this video. It was exactly the repairs I needed to make!
Awesome! Thanks for watching!
Great video and walk through. I replaced rollers, tensioner and belt today. Thanks!
You're welcome! Thanks for watching!
Thank you this came in very handy today i thought it was the belt but the tensioner pulley totally broke. Glad I ordered the whole kit.
Glad I could help. Thanks for watching!
Great camera work one of the best DYI videos Ive seen and you are very cool much calmer than I am. Really great job!
Thanks! Thanks for watching!
You are a hero. Outstanding, clear instructions. Thanks big guy. Much appreciated. Fixed my dryer no problem.
Awesome! Glad I could help. Thanks for watching!
Thanks for the thorough instructions. It is easier to remove the back panel to replace the back rollers. There are five screws on the back of the dryer. And then you unscrew the heating element.
I'll have to look into that next time. Thanks for the info.
Great repair video. Found the the tensioner shaft/collar were rusted. This made the plastic roller come off. I was able to polish the two metal parts, press the plastic roller back onto the collar, grease, and get it all back together. It's running, at least for the short term. I will order a new belt and tensioner for the future.
Awesome fix. Thanks for the info and thanks for watching!
Thank you. I’ve never done this before and was able to follow along and fix my dryer. Much appreciated
Awesome! Thanks for watching!
Amazing video. Changed out my tensioner and belt. Very helpful and it works!! God bless!
God bless you too! Thanks for watching!
Great great video I'm a woman ordered the parts and followed you step by step must easier with this video you posted thanks
Awesome! I love to help the ladies. Thanks for watching!
Thank you so much. This was one of the best step by step videos I've ever used.
Awesome! Thanks for watching!
Thank you so much man I got stuck on the belt part so I appreciate the fact that you did a doble split screen just to show how to do it thank you very much for that
You're welcome! Thanks for watching!
very helpful, thanks. Just completed this. I do think it's easier to just leave the top flipped open the entire time from start to finish.
Glad I could help. Thanks for watching!
Thanks for taking the time to post this video. I would never have figured out how to get the belt back around the tensioner pulley without it🤜🤛
Glad I could help. Thanks for watching!
OUTSTANDING VIDEO. perfect mix of talk and doing. REALLY AWESOME 👍
Thanks! Thanks for watching!
thanks to this video I just replaced the wheels, belt, spring and retention thingy, saved a ton of money and dryer is running like new!
Yippee! Glad I could help. Thanks for watching!
2 years later and this video is still relevant! Just finished the job, thanks!
Awesome! Thanks for watching!
Step by step very clear great video. Thank you for sharing. God bless you brother!
God bless you too! Thanks for watching!
Much appreciated the details and the explanation!!
Saved me a ton of money 🤑
Thanks you!!
You're welcome. Thanks for watching!
Exactly what I needed. You saved me hundreds of dollars! Thanks so much for this informative video.
You're welcome! Thanks for watching!
Most excellent video. Thank you for taking the time to do in such a comprehensive manner. 🍻
My pleasure. Thanks for watching!
Thanks for the help, this is my 5th time having to fix my 7 year old Samsung. First time doing rollers though, it’s usually the heating element
I know this dryer like the back of my hand because I've had to repair it so many times.
I'm adding my Thanks. You did a great job on this video and saved me time and $. Nicely done.
Awesome! Glad I could help. Thanks for watching!
Your video was very easy to follow,and saved me lots of money 👍🏽
Awesome! Thanks for watching!
Thank you for the great follow along video. I had two bad rollers. Blown bearings in them.
Glad I could help. Thanks for watching!
Great Video, watched it once.. took me 45 min from start finish never workin on a dryer before.. much quieter now
Awesome! Glad I could help. Thanks for watching!
Thank you and praise the LORD I knew what was wrong but not how to take it apart awesome video
All Glory to God! Thanks for watching!
Thanks! For me it took a 17mm box wrench not a 5/8
Thanks for the info and thanks for watching!
Best video out there for this repair! Thank you!
Awesome! Thanks for watching!
Thank you for this video! I was able to replace my rollers! That nut on the back rollers was a bear! THANK YOU!
You're welcome! Thanks for watching!
I wish I had watched this video a few days ago before replacing my tensioner. Your method was so easy.
Thanks for watching!
Very helpful video. If you follow this video, you can do this in less than 90 min (including vacuuming out all the lint and dust). For mine, the nuts on the rollers in the back were very loose and the ones in the front were so tight they were hard to remove (Samsung should consider threadlocker and using a standard torque). You may have trouble tightening the ones in the back without removing the back (consider threadlocker, which helps prevent loosening caused by stress and vibration, if you aren't able to tighten the nuts fully).
Awesome! Thanks for watching!
Heaven and Hell are real places...for sure! Appreciate you prioritizing FAITH. I've got the exact same dryer, same noise, installed same kit following this video...went perfectly until I was nearing the final step, broke the door switch somehow, so now ordering one for $13 on Amazon. Took all precautions but still got bloody because I'm not handy with tools in tight places...at all. Dang near bought a new dryer instead. Got this one in 2014 and had no problems until recently. Thanks again for a really good quality video on youtube!!!
Glad I could help. Thanks for watching!
Awesome, very detailed video that simplified the mystery of appliance repair and definitely subscribing. Three appliance companies worked on my dryer for over a year and replaced every working part. Started with having to manually spin it to start on heavy loads. Then all loads, then started grinding and eventually locked up last time they worked on it. Helped me troubleshoot to learn my door front is now binding the drum when reattached so guessing it has to be a balance issue. Still haven't been able to correct it so lesson learned is stay away from Samsung.
Glad I could help. Thanks for watching!
This was just what I needed and now my dryer is back in business. Thank you!
You're welcome! Thanks for watching!