The "edge flip" parity is actually a center parity. Any number of centers could be rotated from their original position which would of course also rotate the edges. You can add up the rotations in an entire slice, including the edges and centers to figure by how much you have to turn a center to fix your parity.
"depression is like a gun to the throat.... HELL WITH IT ITS WORSE THAN THAT" -ether egg 2024 you are helping a lot you are so cheerful i cant help but smile
Hi, it makes me think of Oskar's Gear Cube 5X5 which was basically the hell of cubing. I had it since 2019 and managed to solve it this year, finally. You should definitely try it as it's basically a 5x5, but if you move a layer, the one next to it come with it and does a half turn (So 1 turn = r+R2, or u+U2) and trust me, I've solved many difficult puzzles, but this one is by far the hardest I possess. Figuring things out was pretty fun, but because the turning is terrible, it made it 10x worse.
Hey Alex, recently my GAN RS 3x3 (elite magnets) Had a strange problem with one of the corners. It kept clicking whenever i moved it, and when i tried to make it into 3 pieces the white one popped off and isnt going in. I need some help or ideas to put it in.
There's a good reason for that: it's more or less the same process as any other big cube. Learn to solve a 4x4/5x5 first, then a 7x7, and then you should be able to figure out anything bigger.
video #22 of asking for the worlds best force speedcubes for today's episode of "where does today's "asking for the worlds best force speedcubes" episode first appear in the decimal places of pi?", we have 60955058 *22* 31725359 (note: please dont buy 6 super weilongs. at this point, i don't think i'm even doing this for the force cubes. i've just commited to this thing and can't stop it until i reach my goal. sorry mr 3alker but what must be done must be done)
The "edge flip" parity is actually a center parity. Any number of centers could be rotated from their original position which would of course also rotate the edges. You can add up the rotations in an entire slice, including the edges and centers to figure by how much you have to turn a center to fix your parity.
The thumbnail is golden
"depression is like a gun to the throat.... HELL WITH IT ITS WORSE THAN THAT"
-ether egg 2024
you are helping a lot you are so cheerful i cant help but smile
2:21 Nothing 💀
Kinda similar to the maltese Mefferts gear cube
Do a 3D scan and release it for 3D printing.
professional 3d scanners are stupid expensive.
no black is for yellow and orange is for red and green is for blue
The thumbnail be like: Uhm, this is my end!!!
I love me some weird puzzles
This puzzle is awesome! I still remember when Oskar make his first video on this design.
hã yes and square 2 cube and mirror pyraminx yes and square 0cube 😅😮?...
My
😱
Great video!
Amazing job solving such a hard puzzle with no help!
Hi, it makes me think of Oskar's Gear Cube 5X5 which was basically the hell of cubing. I had it since 2019 and managed to solve it this year, finally. You should definitely try it as it's basically a 5x5, but if you move a layer, the one next to it come with it and does a half turn (So 1 turn = r+R2, or u+U2) and trust me, I've solved many difficult puzzles, but this one is by far the hardest I possess. Figuring things out was pretty fun, but because the turning is terrible, it made it 10x worse.
You have a cube wishlist? I'm very curious what's on it.
Nope, but I did when I was 13! xD
Nice!
Lets go the 🐐uplod 🎉
love the videos man! hope u make more!
So on Thursday, which is pi day, it is supposed to snow in Colorado. So could you do a cubing in snow video combined with a pi day video?
i have a gear cube but i can't solve it
my gear cube is a meffert's and it's probably the hardest cube i have
Very good video! You are my favorite youtuber!
i love you man but you look so much like joe biden in the thumbnail lmao
Can you make a maltese gear cube tutorial?
Edit: It should be more like this but with extra centers
Which one is harder? Maltese or mixed up
@@elfredvicignacio2321 a maltese gear cube is a mix up gear cube but with extra centers
😱mixup gear 3x3 no no no no no no?
Noooooooooo you forgor to make a pi day video :(
Also WHEN DA HECK DID U GET TO 700K?!?/!??!?!
He made a pi day video but it was a short 🩳
Would love to get a heart❤ from Z3 CUBING!
Hey Alex, recently my GAN RS 3x3 (elite magnets) Had a strange problem with one of the corners. It kept clicking whenever i moved it, and when i tried to make it into 3 pieces the white one popped off and isnt going in. I need some help or ideas to put it in.
superflip a mixup gear ?😅
Can you make a 21x21 tutorial, because there is not a single video on that on RUclips
There's a good reason for that: it's more or less the same process as any other big cube. Learn to solve a 4x4/5x5 first, then a 7x7, and then you should be able to figure out anything bigger.
Z3 wins again.
7:28 Nothing 💀 #4
5:49 Nothing 💀 #3
3:27 Nothing 💀 #2
NICE VIDEO Z3!
When I didn't yet know, how to solve a Rubiks cube, I though it was all just about 2 piece commutators.
Or not
😱👍gear 1x1x1 .
@Z3Cubing try making mods of event cubes, and turning them into balls, like the barrels but all circle
How come at the end, nothing hit that gear cube? I’m truly puzzled😮
Happy pi day!
nice
PI DAY
What is your favorite non-wca puzzle?
i have seen a similair gear cube called the maltese cube, i think you should try it
You should make a video about the Yuxin stickerless teraminx and petaminx
commutators go insane when solving non-wca puzzles
Og cube
if you haven't yet, you should try to take down the curvy copter plus. it's pretty hard but i managed to do it in a few hours
maybe good for force cube is it stickerless
You should make a magnetic dino cube
make a video reviewing the Toktok cube
I’m fine with 2 less intros I guess
I can't solve this cube.
Imagine: 4x4 gear cube
DO A PI DAY VID
You're a genius, man.
gear mixup ? 😮
👍🤤gear mixup.
Make a Pi day vid
Og
My boy still out here grindin… (First time back after many years) KEEP IT UP!!!!
Nice vid!
Nice!!!
Challenge: create a Braille cube that you can solve in the dark. (Or "blindfolded".)
Noice
My brain has exploded.
Everyone who reads this comment is not first😂
Ok
true.....
I know
No bait guys
Don’t fall for it…
Wait a minut-
Unless they commented already than they saw it later
Early Gang!
|
\|/
i liked my own comment
cringe
yes
Both Queen Mary and SS Unites States still exists today, while SS US is slowly rotting away.
48th 😢
Hehheehehehehehehehehehehehehe noice
Can we just appreciate that he talks every video
next video "I made the world's FIRST Maglev Gear Mixup!"
Before 100 comments gang \/\/\/\/
N i c e c u b e , d u d e .
21st
skibidi toilet in ohio
second
First
FIRST
Love your logo.
video #22 of asking for the worlds best force speedcubes
for today's episode of "where does today's "asking for the worlds best force speedcubes" episode first appear in the decimal places of pi?", we have 60955058 *22* 31725359
(note: please dont buy 6 super weilongs. at this point, i don't think i'm even doing this for the force cubes. i've just commited to this thing and can't stop it until i reach my goal. sorry mr 3alker but what must be done must be done)
12th