im lost, i feel you need to elaborate way more for me to get a better understanding in command prompt, like what do i need to type?, i moved those installs to another folder and now im lost
Great video, followed all steps, but when I run the bootutil64e.exe, I get the message “cannot initialize driver”. I did the -nic=1 -defcfg and also tried -all -defcfg, but I still got “cannot initialize adapter” message. I also tried deleting/uninstalling the adapter in device manager and scanned for hardware changes and still nothing. Also tried doing the command again after doing device manager part, and also still does not work. My adapter is “Intel(R) Ethernet Controller (3) I225-V”. I used the latest version 29.1, but then also tried version 28.3 afterwards but I got the same results. Anything else I could try? Also, I looked at the website and it has a list of compatible adapters, but I checked every single version and my adapter is in neither version…is there an alternative software intel has for my specific model? Or am I just screwed and need to buy a new motherboard?
Hello I followed your instructions, but the cmd returned an error said "unable to write default configuration to EEPROM''. My adapter mode is intel Ethernet connection(17) i219-v. I am sure I followed every step you showed in the video and tried several times(including delete the adapter in device manager). Looking for your reply, have a good day.
Hello I hope I can get some help with my problem I have the Intel(R) Thernet Connection (7) I219-V so like yours and then I downloaded the Intel Ethernet Preboot 28.3 version like you did for windows and I ran the CMD in admin, entered the file location and removed the ethernet cable, when I tried to run the install.bat I got "Aborting installation because driver already exists. Run install /y to override! To Exit, Press any key to continue..."
I know what i did but dont know how to fix i went in devicemanager and went to driver and accidently deleted device from the system but i dont know how to fix it
I'm working with an Intel(R) Ethernet Controller (3) I225-V and I've installed the latest PREBOOT.zip. Whenever I open cmd as admin to change the directory to the installed Winx64 folder to install the .bat file it mentions that it aborted the installation because the driver already exists yet it's still showing code 10 even after system restart. Following up with bootutilw64e.exe -nic=1 -defcfg and/or -all -defcfg yeilds: 1 (Cannot initialize adapter) is there anything else I can try to do?
thank you for your video. I navigated all of your steps successfully, with no errors, and the fix is not working. I have also now tried uninstalling the ethernet adapter, and following up with scanning for hardware changes. I tried doing this both before and after rebooting, with no success. I have an intel i219-LM ethernet adapter. do you have any advice? perhaps I could obtain somewhere a working firmware image for this network adaptor?
@@izzylie thank you for your suggestion. I have not used ubuntu before, is it an entirely new operating system to replace windows? how is it relevant here specifically?
@@izzylie I ran another update cycle, and somehow this cycle fixed the problem. possibly because I did it after all the fixes you recommended. I am grateful for your help!! :)
Did it, the INF installed successfully, but then I got "Cannot initialize adapter" when executing Bootutilw64e ... It's definitely not physically broken, it worked fine until I made a clean reinstall of Windows.
@@izzylie Hey, thanks for the reply. It wasn't, but I solved the problem in a different way. It seems the newest build of the driver (29.2.1) was faulty. As soon as I went back to 28.3 (the latest of the 28.x builds), it worked fine.
Actually, after that I uninstalled the device from Device Manager, used Scan for New Hardware, ran the bootutilw64e.exe command again and it worked like a charm. Rebooted, plugged the ethernet cable back in and bam, worked. You're a life saver!
I get a "Setting PXE EEPROM words back to defaults on NIC 1...error Unable to write default configuration to EEPROM" error when I run bootutilw64e.exe with either the -NIC=1 flag OR the -all flag.
@@izzylie done it bunch of times already, searched online and found someone says that it has to do with secure boot, tried disabling and re-enabling it back and forth but still not working
It's crazy how you explaining that you don't want to explain how to enter in things into CMD because it's basic computer literacy took longer than if you would've just told people following along put cd first then space and copy the path. And even in the comments you're still telling people to look it up instead of just helping them. Like why even make this video to help people if you're going to be a dick about the little things too. lol
because the topic of this video is how to re-flash an ethernet adapter nand, not how to use command prompt. by that logic I should also show how to install a browser, connect to internet, download files and unpack them. if you are eager to learn basic computer literacy, there are plenty of instructional videos online, i guess after a couple hour long videos and a few weeks of doing everything through cmd you will familiarize yourself enough to understand how it actually works, not just parrot the command you see on-screen and having no clue what went wrong if you mistype something. but I appreciate my viewers time and will not waste it on something they most probably already know. this is not kindergarten, educate yourself
@@izzylie I already knew how to use CMD, still though I see people in the comments asking and it really isn't that hard to answer them you're literally just going out of your way to be a asshole about it. Why even make a tutorial video to help people if you're going to be gatekeep simple instructions you easily could've included in the video without making it any longer by 30 seconds? You just had to say what you're doing so people can copy you. But you are actually just being a asshole about it for no reason. It's a bad look and you just seem really petty for no valid reason.
@@izzylie lol you removed my comment cause you know im right, you're legit being petty in the video and in the comments for absolutely no reason. Almost like a weird superiority complex? good video though just sucks you have such a bad personality.
Which comment exactly, I have 3 of yours in this thread so far? I strongly believe that stupidity of everyone has to be publicly displayed, and that's why I never remove comments, I actually had to extract yours from spam where they go automatically, so everyone can behold. You may think what you want, but the idea behind my solution videos is to personally test if a proposed solution works or not, and showcase that. not educate on what I consider basic PC knowledge. RUclips is not made for kids, and I'm not holding anyone by the hand to make baby steps. You are free to make your own videos though, educate on CMD ot whatever. Good luck.
C:\Intel29.0\APPS\BootUtil\Winx64>BOOTUTILW64E.EXE -all -defcfg Intel(R) Ethernet Flash Firmware Utility BootUtil version 1.40.05.0 Copyright (C) 2003-2023 Intel Corporation C:\Intel29.0\APPS\BootUtil\Winx64>BOOTUTILW64E.EXE -all ERROR: ALL option does not work standalone help pls, i dont know
![How to Fix “This Device Cannot Start (code 10)” Error? [5 Methods]](http://i.ytimg.com/vi/YUcP75FmgP8/mqdefault.jpg)
Omg this long story about intel is good on both languages Izzy speaks
Thank you, this worked a treat. Also established my cable was also a issue but that was a easy fix after this.
@Izzy Laif your fix worked for me, thank you!
im lost, i feel you need to elaborate way more for me to get a better understanding in command prompt, like what do i need to type?, i moved those installs to another folder and now im lost
study some basic computer literacy, i.e. filesystem and command prompt. after you get some knowledge the instructions will be crystal clear
Great video, followed all steps, but when I run the bootutil64e.exe, I get the message “cannot initialize driver”. I did the -nic=1 -defcfg and also tried -all -defcfg, but I still got “cannot initialize adapter” message. I also tried deleting/uninstalling the adapter in device manager and scanned for hardware changes and still nothing. Also tried doing the command again after doing device manager part, and also still does not work. My adapter is “Intel(R) Ethernet Controller (3) I225-V”. I used the latest version 29.1, but then also tried version 28.3 afterwards but I got the same results. Anything else I could try? Also, I looked at the website and it has a list of compatible adapters, but I checked every single version and my adapter is in neither version…is there an alternative software intel has for my specific model? Or am I just screwed and need to buy a new motherboard?
use version 28.3. also delete from device manager. also disable fast startup _in windows_ (not bios). remove ethernet cable.
Hello I followed your instructions, but the cmd returned an error said "unable to write default configuration to EEPROM''. My adapter mode is intel Ethernet connection(17) i219-v. I am sure I followed every step you showed in the video and tried several times(including delete the adapter in device manager). Looking for your reply, have a good day.
try earlier version 28.3. and make sure cmd is admin
i did all the steps but the problem still keeps. i have a dell laptop with the i219-lm, any ideas? i use intel v29.3, thanks
try 28.3
Hello I hope I can get some help with my problem I have the Intel(R) Thernet Connection (7) I219-V so like yours and then I downloaded the Intel Ethernet Preboot 28.3 version like you did for windows and I ran the CMD in admin, entered the file location and removed the ethernet cable, when I tried to run the install.bat I got "Aborting installation because driver already exists. Run install /y to override! To Exit, Press any key to continue..."
install /y
I know what i did but dont know how to fix i went in devicemanager and went to driver and accidently deleted device from the system but i dont know how to fix it
just reboot
Гутен морген Изя!
I'm working with an Intel(R) Ethernet Controller (3) I225-V and I've installed the latest PREBOOT.zip. Whenever I open cmd as admin to change the directory to the installed Winx64 folder to install the .bat file it mentions that it aborted the installation because the driver already exists yet it's still showing code 10 even after system restart. Following up with bootutilw64e.exe -nic=1 -defcfg and/or -all -defcfg yeilds: 1 (Cannot initialize adapter) is there anything else I can try to do?
try deleting the controller from device manager first, then let it rescan the devices
@@izzylie didnt worked for me i tried to rescan for device but still cannot initialize adapter. Idk im not uised to work with cmd but im trying
@@k0ala166 for that particular adapter, try a previous version of the tool, 28.3
thank you for your video. I navigated all of your steps successfully, with no errors, and the fix is not working. I have also now tried uninstalling the ethernet adapter, and following up with scanning for hardware changes. I tried doing this both before and after rebooting, with no success. I have an intel i219-LM ethernet adapter. do you have any advice? perhaps I could obtain somewhere a working firmware image for this network adaptor?
you may want to boot from an ubuntu live usb and try the same under linux
@@izzylie thank you for your suggestion. I have not used ubuntu before, is it an entirely new operating system to replace windows? how is it relevant here specifically?
@@222sp33d try a previous version, i.e. 28.3 of the tool under Windows.
@@izzylie I ran another update cycle, and somehow this cycle fixed the problem. possibly because I did it after all the fixes you recommended. I am grateful for your help!! :)
and how am I supposed to download this fix when my ethernet controller WON'T start
well, you figured how to go online to post this comment, didn't ya?
Did it, the INF installed successfully, but then I got "Cannot initialize adapter" when executing Bootutilw64e ... It's definitely not physically broken, it worked fine until I made a clean reinstall of Windows.
is the cable unplugged?
@@izzylie Hey, thanks for the reply. It wasn't, but I solved the problem in a different way. It seems the newest build of the driver (29.2.1) was faulty. As soon as I went back to 28.3 (the latest of the 28.x builds), it worked fine.
it says cannot initialize adapter
yes ive tried uninstalling from device manager and it is an admin cmd prompt
which adapter is that
@@izzylie i218-v from asus z97-ar
@@splat2glitcher try the previous version of the pack. i.e. 28.3
I get a "cannot initialize adapter" error when I run bootutilw64e.exe with either the -NIC=1 flag OR the -all flag.
Actually, after that I uninstalled the device from Device Manager, used Scan for New Hardware, ran the bootutilw64e.exe command again and it worked like a charm. Rebooted, plugged the ethernet cable back in and bam, worked.
You're a life saver!
I get the cannot initialize adapter
@@rlbigfishwhen i uninstall it from device manager and scan for hardware it gives cannot initialize also
@@Marwan-oj3lc same for me: "cannot initialize adapter" and uninstalling and rescanning didn't help
@@adamkadmon6339 I didn’t find any solution to it
I get a
"Setting PXE EEPROM words back to defaults on NIC 1...error
Unable to write default configuration to EEPROM"
error when I run bootutilw64e.exe with either the -NIC=1 flag OR the -all flag.
try removing it from device manager and then search for hardware changes
@@izzylie done it bunch of times already, searched online and found someone says that it has to do with secure boot, tried disabling and re-enabling it back and forth but still not working
are you sure you run cmd from admin though?
@@izzylie yes i did
may be you would try booting from say a live Ubuntu stick and do the same from there. there's a linux tool next to windows one on intel website
ini kak wulan pernah mampir di channel ryan yg multilingual
What do i do if it says ERROR: PXE is not flashed on port 1
try to remove the card from device manager and repeat the steps
Not working for me. It set NIC 1 back to default but problem persists
what is your card model
I don't know how to check the model but it Intel(R) Ethernet Connection I219-LM
@@ismailazeez1124 for that model you want to try 28.3 version of the tool
My Driver is 1217-V which version i should use
try previous tool version. i.e 28.3
Can you help me to fix mine
Учебник в интернет))
ERROR: PXE is not flashed on port 1
what is your adapter model
Not working for me
Hp probook 640 g2 l219-Lm error 10
the solution is the same. you may want to remove it from device manager first
SAME MODEL CAN YOU FIX IT
nice vid
not working 👎👎👎👎👎👎👎👎👎👎
what is your intel card model
It's crazy how you explaining that you don't want to explain how to enter in things into CMD because it's basic computer literacy took longer than if you would've just told people following along put cd first then space and copy the path. And even in the comments you're still telling people to look it up instead of just helping them. Like why even make this video to help people if you're going to be a dick about the little things too. lol
because the topic of this video is how to re-flash an ethernet adapter nand, not how to use command prompt. by that logic I should also show how to install a browser, connect to internet, download files and unpack them. if you are eager to learn basic computer literacy, there are plenty of instructional videos online, i guess after a couple hour long videos and a few weeks of doing everything through cmd you will familiarize yourself enough to understand how it actually works, not just parrot the command you see on-screen and having no clue what went wrong if you mistype something.
but I appreciate my viewers time and will not waste it on something they most probably already know.
this is not kindergarten, educate yourself
@@izzylie I already knew how to use CMD, still though I see people in the comments asking and it really isn't that hard to answer them you're literally just going out of your way to be a asshole about it. Why even make a tutorial video to help people if you're going to be gatekeep simple instructions you easily could've included in the video without making it any longer by 30 seconds? You just had to say what you're doing so people can copy you. But you are actually just being a asshole about it for no reason. It's a bad look and you just seem really petty for no valid reason.
go help them then 👍
@@izzylie lol you removed my comment cause you know im right, you're legit being petty in the video and in the comments for absolutely no reason. Almost like a weird superiority complex? good video though just sucks you have such a bad personality.
Which comment exactly, I have 3 of yours in this thread so far? I strongly believe that stupidity of everyone has to be publicly displayed, and that's why I never remove comments, I actually had to extract yours from spam where they go automatically, so everyone can behold.
You may think what you want, but the idea behind my solution videos is to personally test if a proposed solution works or not, and showcase that. not educate on what I consider basic PC knowledge. RUclips is not made for kids, and I'm not holding anyone by the hand to make baby steps.
You are free to make your own videos though, educate on CMD ot whatever. Good luck.
Promo*SM
C:\Intel29.0\APPS\BootUtil\Winx64>BOOTUTILW64E.EXE -all -defcfg
Intel(R) Ethernet Flash Firmware Utility
BootUtil version 1.40.05.0
Copyright (C) 2003-2023 Intel Corporation
C:\Intel29.0\APPS\BootUtil\Winx64>BOOTUTILW64E.EXE -all
ERROR: ALL option does not work standalone
help pls, i dont know
whats the output of the two commands together?
Не ценят они твою помощь, не ценят... @@izzylie