Thankyou so much! You helped me create my first monkey's first! I am not a sailor but I am using the rope for curtain tie backs. You made it so easy and your voice is so encouraging! I had to restart twice but you got me through it!!!
I didn't want my wife's Bane to be heavy, so cut out an old piece of pvc pipe insulation, formed into a one inch ball, tied around that with different colored 395 paracord. Used one of her old pieces of broken ear ring for decoration and tied it like yours. Much thanks for the gr8 tuts, very easy to follow along with you Tim, you do outstanding vids.
You should send one of these to zgb studios. I really think it would be cool to see this against one of their heads. Anyway hope you have a great day!!
The problem I run into is tightening, when I take the slack out, two side get too tight and tighten onto them selves and the. The other I can see the ball through. What am I doing wrong?
At the bead section. If i do not have a bead like the one showed in the video what kind of knot do you recommend to replace that. I heard you mentioned a diamond knot and I'm simply wondering if a Matthews walker knot would work as well since that's a lot easier for me to do
question: I have a wide mouth (1" or so) Slide Bolt Spring Snap, Swivel and obviously the opening is wider than the snap shackle in your example, is there a way to double weave or widen out the weave where my swivel is added to the paracord chain so that it's not just sliding in the gaps?
Hey Man! Is there a way to tie one lanyard style to my knife? without burning? because when i burn the tips it always always isn't durable enough Thanks !
Just the ball end is fine, but you can dip the entire thing if you want everything to be tighter and solidified. It will shorten the overall length slightly though, so keep that in mind.
I made a (For lack of a better term) Russian Nesting Doll of Monkey Knots. I started with a square knot and made a 2 pass MF over that, the continued adding passes until it was about 1.5" in Diameter. When snugged really tight in the end, it has plenty of thwack and it's all just paracord. Monkey Fist, wrapped around Monkey Fist.
Завтра схожу куплю паркорд а металлический шар у меня есть дядя привёз шар с подшыбника с танка он просто военный и механик и шары достаточно большые правда не знаю как вязать подставки. Для дердания шара нет а гвозди можно не так точно забить а покупать тратить ради одного шара на подставку не хочу буду пробовать гвозди забить так по диаметру шара, просто шар большой но меньше чем бельярдный но в руке я пробовал вязать не выходит шар большой, а столько петел. На пальцах не момещаеца, как то да и свяжу и дам пи*ды одному ган*ону
Is possíble uses a steel carabiner to replace the steel ball? Like a Sharp shooter Keychain but heavier. One of this stainless steel carabiner ruclips.net/video/2Q7nOkHxpMc/видео.html Make a heavy dutty version of this ruclips.net/video/ZwKGbxDXXiM/видео.html
Ah you think weaving is your ally? You merely adopted the weave. I was born in it, molded by it. I didn't see a pattern until I was already a man, by then it was nothing to me but worthless!
WOE Paracord Store Is Launching Soon! ▶ www.paracordweavers.com/
GET MY FREE EBOOK ▶ www.weaversofeternity.com/freebook
Just made this and its excellent. Thank you.
Thankyou so much! You helped me create my first monkey's first! I am not a sailor but I am using the rope for curtain tie backs. You made it so easy and your voice is so encouraging! I had to restart twice but you got me through it!!!
I didn't want my wife's Bane to be heavy, so cut out an old piece of pvc pipe insulation, formed into a one inch ball, tied around that with different colored 395 paracord. Used one of her old pieces of broken ear ring for decoration and tied it like yours. Much thanks for the gr8 tuts, very easy to follow along with you Tim, you do outstanding vids.
You should send one of these to zgb studios. I really think it would be cool to see this against one of their heads. Anyway hope you have a great day!!
I made a bola similar to this but it has a monkey fist on both ends with a couple feet of braid in between.
Love each and every video Tim. You are a true artist
Can you do knots to help with keeping the cord in place when weaving? Thank you so much!
Where’s the rattle snake weave with the buckles I have been waiting for it once I got into it
if possible can you recomend any books about globe knots (turk's head knots) for beginners. Thanks for help
The problem I run into is tightening, when I take the slack out, two side get too tight and tighten onto them selves and the. The other I can see the ball through. What am I doing wrong?
At the bead section. If i do not have a bead like the one showed in the video what kind of knot do you recommend to replace that. I heard you mentioned a diamond knot and I'm simply wondering if a Matthews walker knot would work as well since that's a lot easier for me to do
Any sort of two strand stopper knot would be fine. A Matthew Walker knot would work well for sure.
Wonderful piece and amazing teaching! Thank you.
5 pass monkey fist in hand? That's bold of you.
Why is that hard to do? I just ordered everything to do this.. Except for the jig.
Bonjour 👋 superbe réalisation...bravo..! Combien de longueurs de cordes me faudrait-il pour 60cm de réalisation ?? Cdt..merci.
question: I have a wide mouth (1" or so) Slide Bolt Spring Snap, Swivel and obviously the opening is wider than the snap shackle in your example, is there a way to double weave or widen out the weave where my swivel is added to the paracord chain so that it's not just sliding in the gaps?
Oi ,sou do Brasil, amo seu trabalho, tem como traduzir os seus vídeos?
Do you know where I can buy vest extender snaps?
Can you do a video on how to make this with just the rope i'm not adding a bead or fastener?
Hey Man!
Is there a way to tie one lanyard style to my knife? without burning? because when i burn the tips it always always isn't durable enough
Thanks !
LOVE this video
Nice, I have some larger balls to use for this. I carry one all the time; never know...
Hi 👋🏽. Do you put the finish Keychain in hot tap water or just the ball end?
Just the ball end is fine, but you can dip the entire thing if you want everything to be tighter and solidified. It will shorten the overall length slightly though, so keep that in mind.
@@TheWeaversofEternity Thank you so much. I really appreciate it.
I have such a hard time tightening the monkeyfist, everything else I am pretty confident with but once it is time to singe it up I just cant do it
Is there a website that l can purchase these items at??
Bonito gracias
Thanks for the post
What would I look up to find them beads?
Really cool
Beautiful!!
Do you sell monkey knot door knockers.? Can someone order a certain color and size?
I cant do it i have a 1 inch steel ball with 3/8 paracord and i cant do it by hand something always goes wrong
but it's so pretty !!
How much paracord should I start with if I want to make one of these 3 feet long?
At least 3 feet.
And a free ride to the pokey.
I m very excited
Nice!
For legality, search statutes for slung shot.
Спасибо.
What is it for?
Hitting things
@@TheWeaversofEternity Hitting friends?
can you make double monkey fist. Thanks
I made a (For lack of a better term) Russian Nesting Doll of Monkey Knots. I started with a square knot and made a 2 pass MF over that, the continued adding passes until it was about 1.5" in Diameter. When snugged really tight in the end, it has plenty of thwack and it's all just paracord. Monkey Fist, wrapped around Monkey Fist.
nice
Cool
What's sup tim
If anyone asks its a key chain.
Hello
Hello!
Step One, make your Monkeys Fist...
wowwww- show
I make similar tools. Hit my own butt and limped got two months.
🔥👌😍👍
It look so easy but it's not 😂
Завтра схожу куплю паркорд а металлический шар у меня есть дядя привёз шар с подшыбника с танка он просто военный и механик и шары достаточно большые правда не знаю как вязать подставки. Для дердания шара нет а гвозди можно не так точно забить а покупать тратить ради одного шара на подставку не хочу буду пробовать гвозди забить так по диаметру шара, просто шар большой но меньше чем бельярдный но в руке я пробовал вязать не выходит шар большой, а столько петел. На пальцах не момещаеца, как то да и свяжу и дам пи*ды одному ган*ону
Nothing like a test demo. Wacky
Please respond
Maybe he’s busy, and that’s why it’s premiered so early
hmmmmm
Is possíble uses a steel carabiner to replace the steel ball? Like a Sharp shooter Keychain but heavier.
One of this stainless steel carabiner
ruclips.net/video/2Q7nOkHxpMc/видео.html
Make a heavy dutty version of this
ruclips.net/video/ZwKGbxDXXiM/видео.html
Sure, you can attach whatever heavy hardware you want on the end and it would work similarly.
@@TheWeaversofEternity tnx for reply im planing make one of this here. Is a common Keychain but its a good dissimulate impact weapon
Ah you think weaving is your ally? You merely adopted the weave. I was born in it, molded by it. I didn't see a pattern until I was already a man, by then it was nothing to me but worthless!
Lol,... well done.