Hi guys! Thanks to you, this channel had a great progression until ... last week 🥺 This episode had to be published last Friday, not today, but due to too much work on it, I had to postpone the upload. And RUclips had a pretty hard reaction, almost no suggestion of my content anymore 😢 So if you really liked this video, please remember to: - Like it 👍 - Tell me what you think about it in the comments section 😍 - Share it on the social medias 😘 - Subscribe ❤ - Follow me on Instagram for more content: instagram.com/french.satisfactory/ 😷 Kisses from France 🇫🇷 Love you all! ❤
yey, no improvement on my side yet. I guess I will have to upload regularly some videos again to go back the same level this channel had 2 weeks ago... 😬
A few notes, make sure to screw and un-screw things from corner to corner as it applies pressure better instead of just going clockwise. Another thing is with GPUs and most times with CPUs you don't need to use a spudger to spread out the thermal paste, you can if you want but with the amount that is added the heatsink will almost always cover the whole chip. Great video and cleaning, keep up the good work!
Hi Fiveer11! You are right for both. About screw and un-screw, I knew this, but yeah, I have to remember to do it every time 😅 I will take a particular attention to this for the next videos 👍 About spread out the thermal paste, if I'm doing it like that it's more to be sure I don't have too much of it on the CPU/GPU. It's especially the case for GPUs where I almost every time put too much thermal paste. But I totally agree about that if you put the right quantity you don't have to spread out it as I'm doing it. BTW, I pretty easily could stop to do it for the CPU. Need maybe more practice to stop to do it on GPU 😅 The thing is, doing things on video (especially for me who only made 6 videos) make it more complicated. I have to check if everything is working well (mic, focus, hands positions etc...), and yeah... It's still a bit complicated to do everything well and recording in the same time. I know my videos are not perfect yet, and will need couple of other upload to improve them, so thanks a lot for taking time to give tips and remember me good practices! ❤️❤️
Another awesome restoration video! I must say, I have never seen a floppy drive in a Ryzen computer, but hey there is a first time for everything XD That machine looks great without all those stickers, you did a great job! Keep up with the awesome content!
ahahah yeah, there is a first time for everything as you said. It's so nice to see you back in the comments section Volvo240! Thanks for your words, really appreciate 🥰
ahahah!!! you are right 😆 I realized that it was not possible to connect the floppy to the motherboard when I reassembled the PC. So I just left it as it was when the owner gave it to me... disconnected. he kept it for aesthetic reasons I guess. Anyway, well done ✌️
Yeah, I fully understand the nostalgia, I'm pretty sur I would have some surprised if I check mine also. That should be a pretty nice idea for video on a RUclips tech channel. Nice to know you liked the videos, and thanks for your nice comments ❤️
@Kelly Gilbert I actually was able to read and write floppies with an old USB floppy drive in WINDOWS 11! I had no idea Microsoft still supports floppies. I was even able to transfer files via floppy disk to my 386 machine running Windows 3.1 😆
Great job! Really like your videos! It's very pleasing to see how intesive you work on used hardware. Concerning stickers: I've had several times the same issues and was always annoyed about my manual results. Therefore I intesively searched the market and found a product called "Würth Industry Cleaner". Just spray it on, let it sit for at least 10 seconds and then swipe it off. You'll get exceptional results. You shouldn't use it in closed rooms because it seems to be quite toxic.
Hi Pradeep Rajput! I am using alcohol to clean it. The recommended one is Isopropylic alcohol. Thank you for your comment, nice to know you liked the video ☺️
oh just realised that you maybe was talking about the compressed air duster. I buy them in France, so I can't give you the reference I am using, but looks like that one is the Amazon Best Seller: www.amazon.com/Falcon-Compressed-Disposable-Cleaning-DPSJB/dp/B0000AE67M/ref=zg_bs_3012916011_sccl_1/142-9807519-0189852?pd_rd_i=B0000AE67M&psc=1
Cool video. Suggestion: maybe replace the CMOS battery if it hasn't been changed recently, and don't fully tighten the GPU cooler until all the screws are mostly in place. Also, I was expecting a blow of compressed air into the CPU socket to make sure no cotton fibers or dust got in there, but it didn't come, lol.
The build itself is quite good actually, those PNY ssds are pretty good for making older pcs a bit faster as I do that myself, tho I thought that GPU would've been a gtx 650. Still pretty good outside of the GPU needing an upgrade, the ram aswell. Great video btw.
Hi Austin, Good question. Did some research and it is visibly to "help direct the airflow from one side of the PSU towards the exhaust at the back" Maybe I should have asked ChatGPT first. Here's his answer: "A plastic piece on the fan in a power supply unit (PSU) is typically used to guide and direct airflow. It is often used to shape the flow of air coming out of the fan so that it is more evenly distributed and directed towards specific components in the system. This can help to improve the cooling performance of the PSU and ensure that it is operating efficiently. The plastic piece is usually attached to the fan housing or blades and is positioned in such a way as to shape the airflow coming from the fan. Do you have any other questions about this topic?" 😅 I'm every time impressed by his answers ... 🤪 Thanks for your comment Austin. Glad you enjoyed the video ❤️❤️
Hi @hawkofthereborn43, I'm using normal brushes, but I'm thinking about buy some antistatic ones, which I recommend 😅 The vacuum is a Dyson v11 torque drive extra. Thanks for your comment, hope you enjoyed this video. ❤️
When you decide to start filming the machines booting up, know that using a video camera (even a good one) to capture the screen can be tricky and may not result in the best video. I've used an Epiphan VGA2USB capture device with decent results. They have both Windows and LInux drivers and you can use VLC to record the video. You'll have to get them used as they're discontinued. I've occasionally used the cheap HDMI to USB adapters too. Keep up the good work!
ah true! I didn't think about this. I will check what I can do to not make down the video quality with this. Thanks for the warning and for sharing! ❤️
Hi Wurlah! If I remember well, you are the 6th one who is asking for it 😅 I will work on it for the next video. I just need to find a way to make this feet well with the satisfaction mood. Thank you for your comment ❤️
A floppy drive in a socket AM4 system? It wasn't connected to the motherboard - no modern mainstream board will have the right port - so it's just sitting in the case, with power. :D I had to wonder why the side of the case was held on with masking tape - perhaps Sacha was always taking the side off for one reason or another. Anyway, I hope Sacha is happy with how it looks now. And if dust were worth anything you'd be a millionaire by now!
Amazing video, I'm just a little confused about that person's choice of a case? like a Ryzen 5 2600, which is a decently recent CPU in a case older than most TikTok kids? btw I saw some of your replies to other comments where you said you talked to the person? could you ask them if they still use that case and if so why?
Hi TheScoffe! Well, this computer came from a friend of my brother. He just told me that he didn't use it anymore, so I was able to keep it for days if needed. He have another one as his regular computer. And for sure this case is .... yeah, not so great 😅 Not sure to understand your question. Is it why this guy used this case for this computer? Great to know you enjoyed the video 😍 Thanks for your comment ❤️
Hi TheScoffe! Just received his answer: "Alors c’est assez simple aha. En gros j’ai monté mon pc tout seul à 13/14 ans. Et mon père avait un deuxième job où il réparait des pc et du coup il m’avait donné une base dont ce boîtier pour que je puisse le faire etc. Et comme à l’époque j’avais pas vraiment d’argent si ce n’est pour acheter des composants fallait que je choisisse sur quoi je mettrais la priorité aha" Which means in English: "So, it's pretty simple. In fact, I made this homemade Pc when I was 13/14 years old. My father had a 2nd job where he fixed PCs so he gave me some components as this case. At this time I didn't have so much money, I had to decide what was the priority for an upgrade." I also asked him if he currently use this PC. Here is his answer: "Oui je le réutilise maintenant car un ami m’a donné une meilleure carte graphique comme mon ancienne avait un problème" Which means: "Yes, I am using it now because a friend gave me a new graphic card. The old one had an issue" Hope this will answer you well 😊
Hi Playtrack22! Nice to see you back in the comments section 😊 Yeah, I didn't remove the last 3 ones because it looked pretty clean. Maybe was better to do it. Thanks for your comment ❤️
0:11 This is why I'll never put stickers (aside from badges) on my case. After a while they start to fade and look like a school locker from 1970-something 😅😅
Yeah... I bought and tested it way after this video 😅 WD40 is a must have to clean computers. Works like charme also to remove complicated thermal paste on chipsets. But thanks for the tip and for your comment @FTSJR-zw6if. Hope you enjoyed this video ❤️❤️
Hi @ricop.pattalitan9300, Well, it was not my computer, it was the computer of one of my Brother's friends. It had these DVD Drives in when I received it, so I just letted it in after my cleaning session 😅 Hope you enjoyed this video, thanks for your comment ❤️
Looking at all the case badges, this thing has been with somebody for a long long time! Meanwhile i've been through multiple cases on ONE PC build over time...
Hi Razman Rhoads! yey! don't know the exact story of this PC to be honest. I just got it from a friend of my brother 😅 The only thing I know is that when he gave me it he told me that I can take my time. He didn't really used it at all. BTW I still have it at my place and should give him back ASAP 😬 Thanks for your comment ❤️
Yeah I often just focus on the deep cleaning part. But I should maybe work more on the upgrades. I will think about this. Thanks a lot for your comment @MegaHalo777 ❤️
Yeah, I just didn't have this WD40 at this time. It was so painful to remove all these stickers without it. As you can imagine, I bought it now. 😅 Thanks for your comment Luis. Hope you enjoyed this video ❤️
Yeah, that's a good tip! But I didn't know back then... hehehe I learned it the hard way 🤪 Thanks for your comment @BlackGymkhana , I hope you enjoyed this old video ❤️
mmmh, which one? there was 3 hard drive in that computer. I guess you are talking bout the Seagate one? Just checked on the video, can't find any date 🤔
![This computer CLEANING was AWFUL [4K]](http://i.ytimg.com/vi/AgsRplYrotA/mqdefault.jpg)
![This computer CLEANING was AWFUL [4K]](/img/tr.png)
Hi guys!
Thanks to you, this channel had a great progression until ... last week 🥺
This episode had to be published last Friday, not today, but due to too much work on it, I had to postpone the upload. And RUclips had a pretty hard reaction, almost no suggestion of my content anymore 😢
So if you really liked this video, please remember to:
- Like it 👍
- Tell me what you think about it in the comments section 😍
- Share it on the social medias 😘
- Subscribe ❤
- Follow me on Instagram for more content: instagram.com/french.satisfactory/ 😷
Kisses from France 🇫🇷
Love you all! ❤
RUclips is lame now, they suppressing so much content from subscribers now a days
yey, no improvement on my side yet. I guess I will have to upload regularly some videos again to go back the same level this channel had 2 weeks ago... 😬
you got yourself a new fan ill watch your vids every time you upload
Thank you so much Red Fox ❤️❤️❤️
You never fail to satisfy with your cleaning! You clean exactly how I do and it makes me feel so happy haha. Keep up the amazing work!
Thank you so much ZoeyNightslayer! I'm going to my bed now, it's a perfect last comment for this day ❤️❤️
Nice to have you in board ☺️
Its good to see a dirty pc shining like the first day, GOOD JOB MAN now we are more than 400 in this beautiful channel 👏💪😎
Thank you very much PCmaniaco! Yeah, I can't believe that we are more than 400 !!! it's amazing ❤️❤️❤️❤️❤️
A few notes, make sure to screw and un-screw things from corner to corner as it applies pressure better instead of just going clockwise. Another thing is with GPUs and most times with CPUs you don't need to use a spudger to spread out the thermal paste, you can if you want but with the amount that is added the heatsink will almost always cover the whole chip. Great video and cleaning, keep up the good work!
Hi Fiveer11! You are right for both.
About screw and un-screw, I knew this, but yeah, I have to remember to do it every time 😅 I will take a particular attention to this for the next videos 👍
About spread out the thermal paste, if I'm doing it like that it's more to be sure I don't have too much of it on the CPU/GPU. It's especially the case for GPUs where I almost every time put too much thermal paste. But I totally agree about that if you put the right quantity you don't have to spread out it as I'm doing it. BTW, I pretty easily could stop to do it for the CPU. Need maybe more practice to stop to do it on GPU 😅
The thing is, doing things on video (especially for me who only made 6 videos) make it more complicated. I have to check if everything is working well (mic, focus, hands positions etc...), and yeah... It's still a bit complicated to do everything well and recording in the same time.
I know my videos are not perfect yet, and will need couple of other upload to improve them, so thanks a lot for taking time to give tips and remember me good practices! ❤️❤️
oh and thank you very much for your last words!! Nice to know you liked the video ❤️
Another awesome restoration video! I must say, I have never seen a floppy drive in a Ryzen computer, but hey there is a first time for everything XD That machine looks great without all those stickers, you did a great job! Keep up with the awesome content!
ahahah yeah, there is a first time for everything as you said. It's so nice to see you back in the comments section Volvo240! Thanks for your words, really appreciate 🥰
ahahah!!! you are right 😆
I realized that it was not possible to connect the floppy to the motherboard when I reassembled the PC. So I just left it as it was when the owner gave it to me... disconnected.
he kept it for aesthetic reasons I guess.
Anyway, well done ✌️
Yeah, I fully understand the nostalgia, I'm pretty sur I would have some surprised if I check mine also. That should be a pretty nice idea for video on a RUclips tech channel.
Nice to know you liked the videos, and thanks for your nice comments ❤️
@Kelly Gilbert I actually was able to read and write floppies with an old USB floppy drive in WINDOWS 11! I had no idea Microsoft still supports floppies. I was even able to transfer files via floppy disk to my 386 machine running Windows 3.1 😆
😯 Excellent 😄
Very nice.
Great job! Really like your videos! It's very pleasing to see how intesive you work on used hardware.
Concerning stickers: I've had several times the same issues and was always annoyed about my manual results. Therefore I intesively searched the market and found a product called "Würth Industry Cleaner". Just spray it on, let it sit for at least 10 seconds and then swipe it off. You'll get exceptional results. You shouldn't use it in closed rooms because it seems to be quite toxic.
Hi Jörn!
Interesting, I will check this out a bit later. Thanks a lot for your comment, really appreciate ❤️❤️
Hi,
Its a nice pc cleaning video,
Could you please tell me what you are using to clean motherboard?
Thanks
Hi Pradeep Rajput!
I am using alcohol to clean it. The recommended one is Isopropylic alcohol.
Thank you for your comment, nice to know you liked the video ☺️
@@french.satisfactory thanks👍
oh just realised that you maybe was talking about the compressed air duster.
I buy them in France, so I can't give you the reference I am using, but looks like that one is the Amazon Best Seller: www.amazon.com/Falcon-Compressed-Disposable-Cleaning-DPSJB/dp/B0000AE67M/ref=zg_bs_3012916011_sccl_1/142-9807519-0189852?pd_rd_i=B0000AE67M&psc=1
Cool video. Suggestion: maybe replace the CMOS battery if it hasn't been changed recently, and don't fully tighten the GPU cooler until all the screws are mostly in place. Also, I was expecting a blow of compressed air into the CPU socket to make sure no cotton fibers or dust got in there, but it didn't come, lol.
Hi Kun Ka! Nice suggfgestions, I keep this in mind for the next video. I should make the shooting tomorrow ✌️
Thank you for your comment ❤️
The build itself is quite good actually, those PNY ssds are pretty good for making older pcs a bit faster as I do that myself, tho I thought that GPU would've been a gtx 650. Still pretty good outside of the GPU needing an upgrade, the ram aswell. Great video btw.
Glad to know you enjoyed this video @trafficracer124 , thanks for your comment ❤️
I’ve always wondered…why is part of the fan in the power supply covered by a piece of clear plastic? Great video!
Hi Austin,
Good question. Did some research and it is visibly to "help direct the airflow from one side of the PSU towards the exhaust at the back"
Maybe I should have asked ChatGPT first. Here's his answer:
"A plastic piece on the fan in a power supply unit (PSU) is typically used to guide and direct airflow. It is often used to shape the flow of air coming out of the fan so that it is more evenly distributed and directed towards specific components in the system. This can help to improve the cooling performance of the PSU and ensure that it is operating efficiently. The plastic piece is usually attached to the fan housing or blades and is positioned in such a way as to shape the airflow coming from the fan. Do you have any other questions about this topic?" 😅
I'm every time impressed by his answers ... 🤪
Thanks for your comment Austin. Glad you enjoyed the video ❤️❤️
@@french.satisfactory Interesting! Thank you.
What brushes and vacuum do you use?
Hi @hawkofthereborn43,
I'm using normal brushes, but I'm thinking about buy some antistatic ones, which I recommend 😅
The vacuum is a Dyson v11 torque drive extra.
Thanks for your comment, hope you enjoyed this video. ❤️
When you decide to start filming the machines booting up, know that using a video camera (even a good one) to capture the screen can be tricky and may not result in the best video. I've used an Epiphan VGA2USB capture device with decent results. They have both Windows and LInux drivers and you can use VLC to record the video. You'll have to get them used as they're discontinued. I've occasionally used the cheap HDMI to USB adapters too. Keep up the good work!
ah true! I didn't think about this. I will check what I can do to not make down the video quality with this. Thanks for the warning and for sharing! ❤️
Oodly satisfying to watch such videos😆😜👌🏼
Thank you very much Rock! Nice to know you liked it ❤️❤️
Nice pc restoration, but id recommend showing the pc off while it's powered on. It would look nicer and provide satisfaction that the pc works fully.
Hi Wurlah! If I remember well, you are the 6th one who is asking for it 😅
I will work on it for the next video. I just need to find a way to make this feet well with the satisfaction mood.
Thank you for your comment ❤️
A great video. When the system owners upgrades to m.2 drives the system will be good
Yey, thank you very much for your comment @GregMurch ! Glad to know you enjoyed watching this video ❤️❤️
Good job! I love your videos
Thank you very much randomdude ☺️
I see a cleaning vid I comment and like push engagement for this awesome tuber :)
Thank you so much Trashtronics! always nice to see you in the comment section!
And special thanks for the support ❤️❤️
A floppy drive in a socket AM4 system? It wasn't connected to the motherboard - no modern mainstream board will have the right port - so it's just sitting in the case, with power. :D I had to wonder why the side of the case was held on with masking tape - perhaps Sacha was always taking the side off for one reason or another. Anyway, I hope Sacha is happy with how it looks now. And if dust were worth anything you'd be a millionaire by now!
🤣
You are right about the masking tape! I'm curious now. Just asked to Sacha why he did this. I'm waiting for his answer. Keep you in touch.
ok so, he moved to another flat and didn't have screws to properly close it. So he secured it like that 😅
mystery solved
@@french.satisfactory I'd have borrowed one from the other side panel, but yes, mystery solved.
Well there was no screws on the other panel too. I had to put 2 of mine here also 😅. I just didn't show it on video
Nice video ı from türkish ✋
Thank you very much Luis man ! Welcome on board ❤️ Hi from France 🇫🇷 to all the Turkish people 🇹🇷 who will see this comment.
@@french.satisfactory :)
Krásna práca nadhera 💪
Veľmi pekne ďakujem @ivanderik2609 za tvoj komentár, som rád, že sa ti video páčilo ❤️❤️
Amazing video, I'm just a little confused about that person's choice of a case? like a Ryzen 5 2600, which is a decently recent CPU in a case older than most TikTok kids? btw I saw some of your replies to other comments where you said you talked to the person? could you ask them if they still use that case and if so why?
Hi TheScoffe!
Well, this computer came from a friend of my brother. He just told me that he didn't use it anymore, so I was able to keep it for days if needed. He have another one as his regular computer. And for sure this case is .... yeah, not so great 😅
Not sure to understand your question. Is it why this guy used this case for this computer?
Great to know you enjoyed the video 😍
Thanks for your comment ❤️
@@french.satisfactory Yes, I was wondering why he chose to use that case for the PC, and whether or not he is still using it.
Hi TheScoffe!
Just received his answer:
"Alors c’est assez simple aha. En gros j’ai monté mon pc tout seul à 13/14 ans. Et mon père avait un deuxième job où il réparait des pc et du coup il m’avait donné une base dont ce boîtier pour que je puisse le faire etc. Et comme à l’époque j’avais pas vraiment d’argent si ce n’est pour acheter des composants fallait que je choisisse sur quoi je mettrais la priorité aha"
Which means in English:
"So, it's pretty simple. In fact, I made this homemade Pc when I was 13/14 years old. My father had a 2nd job where he fixed PCs so he gave me some components as this case. At this time I didn't have so much money, I had to decide what was the priority for an upgrade."
I also asked him if he currently use this PC. Here is his answer:
"Oui je le réutilise maintenant car un ami m’a donné une meilleure carte graphique comme mon ancienne avait un problème"
Which means:
"Yes, I am using it now because a friend gave me a new graphic card. The old one had an issue"
Hope this will answer you well 😊
they are a real dust magnet
Yey, I often have surprised about how computer can be 😅 And it's more often for the worst 😷
Thanks for your comment any❤️❤️
I need to know where I can get that magic vacuum cleaner!!!!
Hi Videos Tops!
It's a Dyson v11 Torque Drive Extra 😉
Another great job
Thanks a lot Ramon ❤️
I wish u removed the three stick on the front looks clean AF
Hi Playtrack22! Nice to see you back in the comments section 😊
Yeah, I didn't remove the last 3 ones because it looked pretty clean. Maybe was better to do it.
Thanks for your comment ❤️
0:11 This is why I'll never put stickers (aside from badges) on my case. After a while they start to fade and look like a school locker from 1970-something 😅😅
Yeah, and it's a nightmare to remove them 😅
nice, i like it
Thank you Fauji Entertainment!
Nice to see you back in the comment section ❤️
@@french.satisfactory 😁✌
Now the spideys (and other... life forms) needs to make new home 😁😂🤣😏
hehehe, as you said 😉
thank you very much for your comment on this video @ACOnetwork , glad to know you watched this one also ❤️❤️
@@french.satisfactory 😁👍
nice nice i like this one
Great to know! Thanks for your comments ❤️❤️
'Vive' to French Satisfactory. 'Morte' to RUclips algorithm!
Thank you MarkTheMorose! ❤️❤️
WD40 dissolves decal glue easily ;)
Yeah... I bought and tested it way after this video 😅 WD40 is a must have to clean computers. Works like charme also to remove complicated thermal paste on chipsets.
But thanks for the tip and for your comment @FTSJR-zw6if. Hope you enjoyed this video ❤️❤️
The amd logo on the cpu cooler is bothering me with it being upside down, lol
héhéhé sorry for that 😅
I was like turn it around!, lol
🤣 Yeah, I easily understand!
Why u didnt remove the 2 dvd when its not plugged
Hi @ricop.pattalitan9300,
Well, it was not my computer, it was the computer of one of my Brother's friends. It had these DVD Drives in when I received it, so I just letted it in after my cleaning session 😅
Hope you enjoyed this video, thanks for your comment ❤️
❤️
❤️
Looking at all the case badges, this thing has been with somebody for a long long time! Meanwhile i've been through multiple cases on ONE PC build over time...
Or looks like an (not so recent) teenager PC 😅
Thanks for your comment ypoora1 ❤️
散熱膏亂塗的下場就是這樣，中間點一下再把CPU壓上去就好了，你的做法是對的
Agree! Fortunately the Thermal Pasteis not electrically conductive 😅
Thanks for your comment 傅大大! hope you enjoyed the video ❤️
A Ryzen 2600 with a 1.44mb floppydrive.....dont think i have seen that combination before...
Hi Magnus Nilsson!
weird combinaison for sure, as custom PC are sometimes 😅
So sleeper customized pc ever.. Ryzen in 15 years old oem case??
Hi Razman Rhoads!
yey! don't know the exact story of this PC to be honest. I just got it from a friend of my brother 😅
The only thing I know is that when he gave me it he told me that I can take my time. He didn't really used it at all. BTW I still have it at my place and should give him back ASAP 😬
Thanks for your comment ❤️
Manca solo un bel upgrade
Yeah I often just focus on the deep cleaning part. But I should maybe work more on the upgrades. I will think about this.
Thanks a lot for your comment @MegaHalo777 ❤️
Công việc tốt
Cảm ơn rất nhiều ❤️
bravo bon nettayage la ces repartie pour 20 ans
Merci à toi dj pouic pouic! Cool de te retrouver à nouveau dans l'espace commentaires ❤️
WD 40 for stickers
Yeah, I just didn't have this WD40 at this time. It was so painful to remove all these stickers without it. As you can imagine, I bought it now. 😅
Thanks for your comment Luis. Hope you enjoyed this video ❤️
@@french.satisfactory Thank you for answer. From Brazil
My pleasure 🇫🇷❤️🇧🇷
The amount of stickers 🤮Great job, btw ^^
hehehe, thank you very much for your comments Luiz ! Glad to know you enjoy ❤️❤️
Pobre Ryzen con un triste modulo ddr4 es decir sin DualChannel y que caja mas fea
hehehe como dijiste. Lamentablemente, no fue mi elección 😅
¡Gracias por tu comentario! Espero que hayas disfrutado el video a pesar de esto, UzuMi ❤️
One stick of RAM for ryzen? Omg...
ehehehe, well that's the owner fault 😇
Thanks for your comment @TheWarSpirit I hope that you enjoyed watching this old video ❤️
You can use WD40 to easily remove stickers/tape glue...
Yeah, that's a good tip! But I didn't know back then... hehehe I learned it the hard way 🤪
Thanks for your comment @BlackGymkhana , I hope you enjoyed this old video ❤️
that hard disk have 17 years since manufacturing 🧐 and a powered but not connected floppy drive??? that's much internet for today 😵💫
mmmh, which one? there was 3 hard drive in that computer. I guess you are talking bout the Seagate one? Just checked on the video, can't find any date 🤔