I was reppin the mint tee today💪🏻💪🏻 just wanted to say Robbie is such an inspiration. I’m doing tech school partly because of him. Greatest car youtuber ever
Hey Robbie, for the z’s roof leak go buy some Shin Etsu grease from either a Honda dealership or online and massage it into the seals. It will puff them up some. You can also use it in window tracks to fix slow windows. Pro tip from your DelSol driving subscriber :)
Did the same with my car my valve isn't as fancy but it comes connected to that Y pipe. I love it because I love the raw should of my car but then I'm also a kind neighbour
Is it just me or does the car have some sort of voltage issue? The moment the throttle was blipped around the 18:34 mark, the lights got brighter and dimmed down once it returned to idle.
12:00 thats called porosity (welding flux/mig with no gas) The way u get rid of porosity is by getting a grinder and grind the shit outta that. If u weld over it, the porosity will keep making its way up to the surface. U have to literally grind the fuck out of that, make sure it's Thin again just enough for you to penetrate and leave a badass root so it don't break or nun in the future. Also definitely recommend u get some scrap metal and weld before hand everytime to make sure everything is good. Throw a few beads, that way u can also adjust the wire speed, and u can adjust if u wanna weld hot or colder. Goodluck in the future mate! Stay committed👊🏼
Also lil secret I was taught in welding school. They don't teach you this stuff, you literally have to figure it out. If u for whatever reason don't have grinder or whatever and want to get rid of porosity I was told to slow wire speed and weld really hot. Welding hot means any trash and stuff stuck inside will rise to the top. Never got to try cause I found mig/flux core welding easy but maybe it'll help you mate.
I have one of those. I bought off AliExpress. Lol. Nice runs on vacuum tho. I was gonna put it on my old car. 13 honda si the K24 motor.. but not I might put it on my jeep. Idk
Hollaaaaa Commited crew, I speak french and I didnt understand something realy well. Is the new exhaust set-up a 3" or is it a 2 1/2" still? Thanksssss in advance
@@daniwamoto5133 Thanks you a lot man, it was clear enought!! Just so you know, you're right it is a ''valve'' ! Exept, we say ''une valve'' instead of ''un valve'' Be safe man !
No views at 32 seconds and already 13th like look at Robbie! Edit I hope this will be as badass as I am hoping for! I was so hoping to see something like this! I debated doing one for my truck but the heads are shot now
Dangerous having it that close to the front, can accumulate CO in the cabin at idle. Also having 3” of closed-end 45 degree pipe right of of the downpipe will cause an irregular exhaust pulse disrupting exhaust flow at high RPM, opening it will lower back pressure and mess with AFR sensor readings being that close to the sensor.
Love being a part of your build 👊🏽
너도 빌드의 일부가 된다
I really hope emerson is the special guest, hes so sweet and knows a lot. was fun when you guys would work together
Fr,they boys should pass through every now and then
Brad is def one of the guests, slipped it last vid
that's what i was thinking too
I miss Emerson so much
After a long day at work, this is exactly what I needed. Thanks for saving the day boys :D
That storm last night was something else glad to see your okay!
Hey Robbie can you mess with some powder coating in the future? It’d be interesting to see
Cant wait to see this beauty progress even more. Definitely looking forward for the dyno! 🤙🏼
I was reppin the mint tee today💪🏻💪🏻 just wanted to say Robbie is such an inspiration. I’m doing tech school partly because of him. Greatest car youtuber ever
I have a cutout on my single cam and I love it! I drive with it open sometimes just because but definitely always have it open at the track.
Dude this is literally my next mod and then this vid comes out😂 it’s destiny!
Long day at work always good to come home and relax and watch your videos 🔥🔥🔥
Yo this vid lowkey made my day I was at work and I was like oh ya there’s a Robbie vid out and ya😂
Literally wait between 3am and 4am in the morning for the new vids🤙
@robbieferreira who makes that ratcheting pipe cutter you have? That thing is slick I need one
Your car collection is getting 👌
Love the exhaust note and awesome work on making it all work. So stoked for the next video 👌
When robbie opens the gate of the garage, me in my mind 'my life be like oooh aaah'
@@sochbymohakmangal2177 get lost
Man just the idea of this is so cool but actually having it. Is so sickkk!!!
That pipe cutter is dope
Nothing better then a Robbie video
fuckin mad scientist robbie out here lmao. Good to see you fabbing up whatever tf u want now
Omg I love fox morrow, you should put glitterati in the background of more videos!!
Hey robbie, when you're Welding, put something down to set your wrist on. Your hands have to be very steady to make it look good, and penatrate best.
Hey Robbie, for the z’s roof leak go buy some Shin Etsu grease from either a Honda dealership or online and massage it into the seals. It will puff them up some. You can also use it in window tracks to fix slow windows. Pro tip from your DelSol driving subscriber :)
You should maybe do some sort of tear drop after the valve it would look clean
just in time for break during work
Man I love thunder storms 😁
Did the same with my car my valve isn't as fancy but it comes connected to that Y pipe. I love it because I love the raw should of my car but then I'm also a kind neighbour
This was awesome 👏 really enjoyed it! Sounds sick 😉
Bro when you weld over porosity it will put porosity into your good weld!
After a long day, this is the perfect end
Idk why but I absolutely love that exhaust I kinda want to use that design myself
This is my most favorite build on the channel
Is it just me or does the car have some sort of voltage issue? The moment the throttle was blipped around the 18:34 mark, the lights got brighter and dimmed down once it returned to idle.
Could you do a side dump exhaust setup with more 3" piping or is the car too low for that?
Lmao Robbie trying to be timmy tenders with the intro song
THANK YOU THIS IS WHAT IVE BEEN BEGGING FOR
Wait! Why is the prop valve underneath the car? Most people tuck the brake lines and put the prop valve inside behind the dashboard.
Would love to see you build an old Alfa Romeo (75, 145, 146, something like that) if you find one, that can be one hell of a unique project!
Imagine a 147 GTA with that glorious V6, or a 155, although i dont see Robbie being much of a Alfa guy 😂
@@JP_A3 i think they still can't be imported, wasn't there a 25 year period? I think he will love them if he rides one
@@grizlito97 oh i dont have a clue im Irish so i know nothing about Canadian/US importing laws haha
What happened to the s10? I know it's not running properly but could we get an update?
It’s always so exciting when Robbie posti a new video
What is the best performance for Y cut exhaust valve . Single valve or dual valve ? What the best brand and long lasting one .
1:19 That Special guest better be Emerson!
Is it worth putting a cutout on?
Robbies worst welds are eqaul to my good welds😂😂
12:00 thats called porosity (welding flux/mig with no gas) The way u get rid of porosity is by getting a grinder and grind the shit outta that. If u weld over it, the porosity will keep making its way up to the surface. U have to literally grind the fuck out of that, make sure it's Thin again just enough for you to penetrate and leave a badass root so it don't break or nun in the future. Also definitely recommend u get some scrap metal and weld before hand everytime to make sure everything is good. Throw a few beads, that way u can also adjust the wire speed, and u can adjust if u wanna weld hot or colder. Goodluck in the future mate! Stay committed👊🏼
Also lil secret I was taught in welding school. They don't teach you this stuff, you literally have to figure it out.
If u for whatever reason don't have grinder or whatever and want to get rid of porosity I was told to slow wire speed and weld really hot.
Welding hot means any trash and stuff stuck inside will rise to the top.
Never got to try cause I found mig/flux core welding easy but maybe it'll help you mate.
does the ek have auto headlights?!?!? 0:32
also this car is coming out so nice
Shheeeesh I can't wait for the tune 🔥🔥🔥🥶
I need to install one of those 🥲
nice work man!
im a simple man. i get the notification, i drop everything and watch the video
Same 😂
Sounds just like my freakn diesel😂 welcome to the tractor gang.
the valve makes the build a lot more sleeperery?
What pipe cutting tool do you use ?
You guys should come to Driven Montreal
19:14 the thunder is even louder than the exhaust setup😂
Perfect setup 👌
Right as I got home from school👌🏽
what’s the name of the exhaust cut off tool you were using, that could come in real handy
I have one of those. I bought off AliExpress. Lol. Nice runs on vacuum tho. I was gonna put it on my old car. 13 honda si the K24 motor.. but not I might put it on my jeep. Idk
Only needs a turn down on it so your hot gasses aren't straight hitting your tunnel.
Hollaaaaa Commited crew,
I speak french and I didnt understand something realy well. Is the new exhaust set-up a 3" or is it a 2 1/2" still?
Thanksssss in advance
C’est 3” quand le “valve” (je ne sais pas, mon français est très mal) est ouvert. C’est 2,5” quand le valve est fermé.
@@daniwamoto5133 Thanks you a lot man, it was clear enought!!
Just so you know, you're right it is a ''valve'' !
Exept, we say ''une valve'' instead of ''un valve''
Be safe man !
he got the MoTec system exhaust damn
Any more news on the big turbo for the genesis?
So a valved exhaust is basically like a 1:1 version of nitro rc cvec pipes
Electric cut out valve for your down pipe is crazy 😂
Man, I missed it bc of work
Me and my stepdad call the crappy welds on exhausts booger pipes, because the welds look all boogered up if you know what I mean 😂
14:05 made me laugh and cry at the same time
No views at 32 seconds and already 13th like look at Robbie!
Edit I hope this will be as badass as I am hoping for! I was so hoping to see something like this! I debated doing one for my truck but the heads are shot now
Did someone get a new camera or lens?
Yes officer it has an exhaust
Make sure to pipe out the dump, I did the same thing and the drone was awful due to it dumping straight in the middle of the car.
I miss you Robbie
I wish Toronto was open for NY I would of brought my genesis
Why wouldn’t you weld the waste gate dump out into the downpipe
Sleeeepah mode!!!
Dangerous having it that close to the front, can accumulate CO in the cabin at idle. Also having 3” of closed-end 45 degree pipe right of of the downpipe will cause an irregular exhaust pulse disrupting exhaust flow at high RPM, opening it will lower back pressure and mess with AFR sensor readings being that close to the sensor.
It's perfect sound
I love the Civics ♥️♥️♥️💯💯💯🔥🔥🔥
Try welding down instead of up. also try turning the pipe as youre going.
Sounds goood!
What cars are you bringing to driven Halifax
First 5 minutes of the video…. Where’s Chris????
You could have just put a 2 inch 45 degree bend pipe and put it back in behind the mid muffler
You should try to make a exhaust for the z
My mr2 makes 450 wheel on pump gas with a 2.5 inch exhaust
i needed this
This is too cool, making me want to buy a k24 and put it in a Miata or something 😂
For the s10 a 5.3 would be just as good 4.8 because 5.3 is a stroked 4.8
Would like to see you connect it to vtec and go for a spin lol 😆
Needs a turn down for the valve but it came out dope
Homie almost got cooked by lightning standing outside 😂😂 I would’ve ran inside hella quick!
im guessing the special guest is either brad, emerson, or jackultramotive
You gotta slow down a little while welding! Looking good tho!
Bet money it’s Emerson
wait he said maybe the 18th I'm only going to see him I hope hes there on the 18th
i thought my screen broke when that lightning struck at the end
Wow
I thought it died when you closed the cutout
I’ve always wanted one😭