How to replace windshield wiper arms. Toyota Corolla years 2000 to 2010.

[@slaavichii1129]

Helpful information and advice. My control arm is scap after watching this. Thank you.

[@PeterFinnTheCarDoctor]

Great to hear!

[@mattrichards1853]

Very helpful video, needed the information about banging the nut as I could not remove the arm after removing the nut

[@PeterFinnTheCarDoctor]

+Matt Rich Hi, Thanks for comment. :-)

[@RexStratton]

If the wiper arm is stuck after removing the nut? Start the engine and turn the wipers on. The arm will throw itself off the spindle

[@chersgroupie]

Nicely detailed, well filmed and very helpful THANK YOU!

[@PeterFinnTheCarDoctor]

Thanks for comment. :-)

[@lorenzoboyd6889]

I heated the arm/spline with a heat gun set on medium for 1 minute. Then I reinstalled the nut 4 turns, then I hit the nut with a hammer. The nut is cheap and replaceable, but the stud is not. I didn't need to mark the correct position; my windshield was dirty, and the dirt marked the proper reinstallation position.

[@PeterFinnTheCarDoctor]

Ok and Thanks for info. :-)

[@plarower]

Helpful. Thank you!

[@PeterFinnTheCarDoctor]

+na an Hello and many Thanks for comment. :-)

[@boonchoon7081]

May i know which "arm" is longer? I had windshield changed and looks like they installed wiper arm incorrectly

[@simontcng]

Not to hammer direct to the bolt head end that it will damage the thread end, put the nut back onto its end with slack then hit it if required

[@PeterFinnTheCarDoctor]

Thanks

[@hellothere640]

I have a 2004 corolla hatchback. Trying to find new front wiper arms but struggling will the verso model wiper blades fit or are they different? Or what other wiper arms will definitely fit i need the whole arm as vandals broke them off from the nut

[@PeterFinnTheCarDoctor]

Hi, visit the car recycle centers.

[@samhowze9901]

Need help on hooking up arms that are UNDERNEATH the hood on a Chrysler fifth Ave(87)

[@PeterFinnTheCarDoctor]

Thank You for info :-)

[@jr7055]

Thanks!

[@PeterFinnTheCarDoctor]

Welcome!

[@MrMe-q5b]

Thanks

[@PeterFinnTheCarDoctor]

Thanks 👍

[@eu6173]

Harmittaa kun noita varsia ei meinaa uusina saada ainakaan motonetistä (e120).. on jo ihan kulunu vissiin ne kiinnikkeetkierteet tuolla eikä jaksa enää nostaa pyyhintä :D

[@PeterFinnTheCarDoctor]

Try a junkyard. 👍😀

[@GeorgeZapo]

Thank you...

[@PeterFinnTheCarDoctor]

You are Welcome too. :-)

[@joeyboy8317]

But how do you do the rear one ??

[@PeterFinnTheCarDoctor]

Hi, I need to do new video

[@joeyboy8317]

I have since figured it out but a new vid might be helpful for others 👌

[@thomasprice1760]

Wth sound like the pink panther...

[@PeterFinnTheCarDoctor]

Yeah. :-)

[@yoyobored847]

It didn’t come out that easily on my car

[@RexStratton]

What you are calling a bolt is actually a nut. #jussayin

[@PeterFinnTheCarDoctor]

Thank You for comment. BR Peter

[@mattwalker9120]

too much talk , not enough showing how to do it

[@PeterFinnTheCarDoctor]

Ok and Thanks !

[@richardmcfarlane8801]

too much unnessary info taking too much time to get to the point

[@PeterFinnTheCarDoctor]

Noted