Great tips Genin. I think the compression gage is something great to take with you when buying a used saw. A much better test than checking the piston for scoring.
Thanks Bob, When is comes to buying 2 stroke snowmobiles compression test is standard, always wondered why people never mention that but are so hung up on cylinder scoring.
Yes low compression might indicate needing new rings but a compression test plus pulling muffler and checking cylinder and seeing scoring would indicate possibly more than just rings. just lifting the saw off the ground by the starter handle will give a relative condition of compression with a bit of experience. broken av mounts, heli coiled spark plug hole.
First and latest saws I bought were used and both have been excellent. I have used Chainsaws for 35 years and the clone saws look all wrong from a distance also the dimensions up close along with the weight and balance are clearly not right. Good topic for discussion, Thanks
I bought a used Stihl 044 10mm that ran. I asked for pics of the piston on exhaust side. The piston still had machine marks. I bought it, happy..... I ordered all new Stihl seals, intake boot, impulse line, fuel line, airfilter and new Caber rings. Got it tore apart and I lost it. The combustion chamber was gouged from something coming apart, bottom of the piston skirt was bent. I found a new OEM Mahle 10mm cylinder for $350, a little while later I found a 10mm piston in Australia for $100 plus shipping to the states. I have more money tied up in a used saw than what my Stihl ms462 costed new. 2 years later it's still not running. It's sitting in a box in the back of my shop. I have to many projects going on at the moment.
@765Guys I have a KS cylinder 10mm also that was bought used from a farmer that retired for $150 that was taken care of. Done the samething by replacing all seals etc. It's a helluva saw and one of my favorites. I would grab my 044 before my 462 but now its my 400c, 044, 661 and 462. The market place saw was cobbled together to screw someone over. The only way I'll buy another used saw is if it's $100 or less and I need something to tinker with. My KS cylinder 044 and my Stihl 08s I paid $30 for at a fleamarket that ran is my only 2 "luck buy's" on a used saw. I'm 50/50 on buying used saws that hasn't costed me in the long run. It's not worth the gamble unless you got extra money to burn or need a donor saw for parts.
Great information on buying pre owned chainsaws a friend bought a sthil 500i brand new and had nothing but trouble with it chain wasn’t oiling and wouldn’t even cut wood and smoking like a chimney 😱🤕😡
If you find a "deal" on a new 462 for way less than retail, check that the serial number isn't scratched out...Kind of a sick feeling to realize you've been had
I'm selling 661cm with 600 in Westcoast parts and died covers.plus the stock muffler and bought new stock cover.and has bought full wrap on it..bark box and new stock air filter plus black air cover with uni filter..and west coast dogs...has about 8 tanks it's basically new not even broke in yet..payed over 2000 for it and parts ..selling it for 1400.oo. piston cylinder are again just Like new bevause it is..was used to drop a few trees light bucking .I put it on market place with honest truth about saw only 1 guy has been serious about buying it. Realy be takeing a loss..I'm smaller dude and just don't use or need it I use my 462 and 500i fir daily tree service..my buisness...also not fan of full wraps they take up entire seat s in trucks.and can't flush cut stumps ..so I just don't use it
great segment. great advice. thanks for sharing.
Thanks!
You made a lot of good points! Nice work Genin👊🏻
Thanks Todd!
Great tips Genin. I think the compression gage is something great to take with you when buying a used saw. A much better test than checking the piston for scoring.
Thanks Bob, When is comes to buying 2 stroke snowmobiles compression test is standard, always wondered why people never mention that but are so hung up on cylinder scoring.
Thank you Genin. Great advice for anyone looking to buy used.
Kenny
Thanks Kenny!
Great Info Genin!! You are a chainsaw expert!! Always helps to take advice from a guy that owns a buffet of saws!! 😉😉😂😂
Thanks Jacob, I’m definitely no expert lol
Good video and tips! I always wonder what was done when I see a bar that has 2 specks of paint left on it.
Thanks!
Hi there Gennin. Some good advice on buying used chainsaws. Thanks for sharing your info. Later bud.
Yes low compression might indicate needing new rings but a compression test plus pulling muffler and checking cylinder and seeing scoring would indicate possibly more than just rings. just lifting the saw off the ground by the starter handle will give a relative condition of compression with a bit of experience. broken av mounts, heli coiled spark plug hole.
Rope pull test will tell compression. No need for a tester
Great tips!👍👍
Thank you!
how to order
how much
Good points in this vid Genin.
First and latest saws I bought were used and both have been excellent.
I have used Chainsaws for 35 years and the clone saws look all wrong from a distance also the dimensions up close along with the weight and balance are clearly not right.
Good topic for discussion, Thanks
I bought a used Stihl 044 10mm that ran. I asked for pics of the piston on exhaust side. The piston still had machine marks. I bought it, happy..... I ordered all new Stihl seals, intake boot, impulse line, fuel line, airfilter and new Caber rings.
Got it tore apart and I lost it. The combustion chamber was gouged from something coming apart, bottom of the piston skirt was bent.
I found a new OEM Mahle 10mm cylinder for $350, a little while later I found a 10mm piston in Australia for $100 plus shipping to the states. I have more money tied up in a used saw than what my Stihl ms462 costed new.
2 years later it's still not running. It's sitting in a box in the back of my shop. I have to many projects going on at the moment.
That sucks! I’ve always been interested in a 044 but haven’t come across one in the shape I’d like.
@765Guys I have a KS cylinder 10mm also that was bought used from a farmer that retired for $150 that was taken care of. Done the samething by replacing all seals etc. It's a helluva saw and one of my favorites. I would grab my 044 before my 462 but now its my 400c, 044, 661 and 462.
The market place saw was cobbled together to screw someone over. The only way I'll buy another used saw is if it's $100 or less and I need something to tinker with.
My KS cylinder 044 and my Stihl 08s I paid $30 for at a fleamarket that ran is my only 2 "luck buy's" on a used saw. I'm 50/50 on buying used saws that hasn't costed me in the long run. It's not worth the gamble unless you got extra money to burn or need a donor saw for parts.
Great information on buying pre owned chainsaws a friend bought a sthil 500i brand new and had nothing but trouble with it chain wasn’t oiling and wouldn’t even cut wood and smoking like a chimney 😱🤕😡
That’s no good!
@@765Guys true he sold it and bought a husky saw and he is delighted with it 🥳🥰
Always buy new with a warranty…The price of one repair is equal to any savings buying used, with no warranty.
Great points Genin ! Especially about a saw used in a Mill situation 🪵⛓🪚👍👏🇺🇸 Rick
Thanks Rick!
If you find a "deal" on a new 462 for way less than retail, check that the serial number isn't scratched out...Kind of a sick feeling to realize you've been had
What happened,??not sure what you mean ..if serial number was gone then you bought it?
I'm selling 661cm with 600 in Westcoast parts and died covers.plus the stock muffler and bought new stock cover.and has bought full wrap on it..bark box and new stock air filter plus black air cover with uni filter..and west coast dogs...has about 8 tanks it's basically new not even broke in yet..payed over 2000 for it and parts ..selling it for 1400.oo. piston cylinder are again just Like new bevause it is..was used to drop a few trees light bucking .I put it on market place with honest truth about saw only 1 guy has been serious about buying it. Realy be takeing a loss..I'm smaller dude and just don't use or need it I use my 462 and 500i fir daily tree service..my buisness...also not fan of full wraps they take up entire seat s in trucks.and can't flush cut stumps ..so I just don't use it
@@Sethhaun78 I didn't think to look for the serial number when I bought it, but wish I did.
Unless you know who owned the saw I would never buy a used saw.
Spot on.