McDonell RF-101C Voodoo USAF 1/72 Valom scale model Full Video Build

#DOCTORMIG #MCDONELL #RF101CVOODOO #USA #USAF #SCALEMODEL #SCALEMODELLING
✔️Photos of the finished model imgur.com/a/X3dH678
✔️Instagram profile / doktormig
✔️Facebook Page / commissionscalemodels
📽New video every Saturday📽
Do you like this build or have a suggestion?
👇 Leave me a comment below 👇
Dragan Cvetić
Music:
The New King - Quincas Moreira
The Machine Assembly - The Whole Otter
Relapse - White Hex
Skying - Public Memory
Landing - Public Memory
Komorebi - Futuremono
Is That You Or Are You You - Chris Zabriskie

[@antoeknee4511]

Good build! I like the fact you have enough confidence to freehand the camo pattern instead of using any type of masks, except where necessary.

[@doctormig2709]

Thanks.I do enjoy the freehand painting a lot.I find it much more realistic than masking.

[@billscott1601]

Dr. Mig, another great model! Glad to see short run kits built instead of the main line brands.

[@doctormig2709]

Thank you Bill ;) I will try to make more shortruns in the future and post the videos here ;) take care

[@lesthiele4921]

Hello Doc, another great kit exceptional job well done, hope you and your family are keeping safe and well.

[@doctormig2709]

Hello and thanks.We are and try to remain that way.Take care and atay safe.

[@chancerNW]

An utterly excellent build of a reccy Voodoo well done

[@doctormig2709]

Thank you ;)

[@sandrozeb]

I like the attention in making the front canopy seamless with the Fuselage. Even accomplished modellers often overlook that detail. However watching real plane photos it is clear that there is no gap between the front canopy and the fuselage. May be the a slight improvement in restoring the front canopy to crystal clear conditions would be great. Well done. First class free hand airbrush. And nice choice of models.

[@doctormig2709]

Thanks ;) glad you like it ;)

[@sultanofswing8270]

Great models as always and by far the best music in any build videos !!

[@doctormig2709]

Thank you very muchmI am glad you like it :)

[@mitzyismad]

Nice build of an iconic aircraft.

[@doctormig2709]

Thank you :)

[@ashpitcher3]

Another fantastic build. Well done, she looks great.

[@doctormig2709]

Thank you Leon ;)

[@The_Modeling_Underdog]

What a beast. Looks great!

[@doctormig2709]

Thank you :)

[@SprueFascinationChannel]

Excellent workflow & result 👍

[@doctormig2709]

Thank you :)

[@user-tp7sc2gx3b]

Замечательная работа!
Буду собирать F-101A.

[@doctormig2709]

Thank you ;)

[@henrysanchez4810]

Another great build Doc, excellent work...

[@doctormig2709]

Thanks Henry :)

[@tjbach8213]

What perfect timing for me as always:)

[@doctormig2709]

;)

[@mhos6940]

I have the same kit. Can't wait to build it but I have many more to build before I get to it. Nice job! Hope mine turns out as well as yours.👍

[@doctormig2709]

It is a bit difficult kit to work with but totally worthed.

[@swing.wing_singh]

Excellent work as usual. The camo is fantastic

[@doctormig2709]

Thank you Sherbir ;)

[@marcosgarcia4467]

Very cool!

[@doctormig2709]

Thanks ;)

[@Ralle1968]

Top Job!👍👍👍

[@doctormig2709]

Thank you ;)

[@laMoort]

great build!

[@doctormig2709]

Thank you :)

[@foreverplastickits138]

*Very nice result 🤩👏👏, i'm jealous, you can freehand paint with an airbrush, i've to use tons of masking tape to do the same! 👍*

[@doctormig2709]

Thank you.Everyone can do freehand camos.It just requires a 0.2mm aibrush properly diluted paints and low air preassure and of course a lot of practice.

[@greenheartjg54]

I would really like to know what airbrush you used here as well as your compressor suggestions.

[@doctormig2709]

0.2mm chineese cheap airbrush.I use a home handmade co.pressor using an old coocking gas tank and refrigerator motor.a friend od mine made it for me.

[@jozeffrantisek4578]

Fin rad! Odličan South East Asia!
Oduvek sam hteo da uradim jednog takvog.... Doduše, mene bi zadovoljila i stara Hasegawa, bez obzira na (ne)tačnost. Bilo bi jako lepo, ako bi, kao suma sumarum, napisao u jednom komentaru sve sta treba da znamo o ovoj maketi (koje su koske, sta se uklapa katastrofa, da li je potrebna bilo kakva hirurgija....). Ti jesi naveo ukratko da fit nije baš najbolji, ali opet.
I da, gde su ti brojevi, baza, stencili? 😃

[@doctormig2709]

Hvala ti Jozefe.I ja sam jednom hteo da nabavin hasegawu ali odustao sam.Maketa se sklapa ocajno.Spoj krila trup je uzasan.Takodje i spoj donjeg dela krila/trup u cnrtralnom delu je takodje ocajan sto se vidi i na samom snimku.Tu se stvori strpenik od 1-2mm i mora se popuniti superlepkom plastikom ili bilo sta slicnom.Trup i nos se sklapaju ok.Prednje staklo mora da se lepo namesti da bi mogao da ga uopste zalepis jer na samom pocetku ispred samog stakla javi se rupa od 1mm.Rezinski izduvi ne nalezu bas najbolje i to se mora malo posvetiti paznje ali to je nista strasno kad se uporedi sa spoj krilo trup.Stensile baza i broj nisam stavio jer je to bio zahtev musterije za koga sam maketu i radio.Takodje rondel na trupu je na vecinu aviona odma ispred usisnika a ne ovako napred.Ali opet kako musterija kaze tako i uradim ;)

[@jozeffrantisek4578]

@@doctormig2709 uh.... Deluje bas haotično, dakle ne preporučuje se ova maketa za neko uživanje u hobiju.... Dobro je da znam, da ga ne uzimam...

[@doctormig2709]

Pazi ako bas hoces rf101c onda nemas drugi izbor.Ovo je najbolje sto postoji.Ali da bi se uradila pristojna maketa mora se raditi bas muski.

[@jozeffrantisek4578]

@@doctormig2709 To je situacija, u glavnom, sa svim limited run maketama.... Na ramu to sve izgleda jako fino, verovatno, kad se sklopi, bude ozbiljan model, ali iskasljes krv dok ga sklopis.....Radije bih izbegao plaćanje makete ako cu se nervirati oko nje..... Iskreno se nadam da ce neka alternativa isplivati, u narednih nekoliko godina, a ako se pojavi Hasegawa, sta god ljudi pričali, nije tačan, pozitiv.... Meni to liči na Vudua, i sigurno se neuporedivo bolje sklapa od Valoma..... Ali dobro, sve ima svoje, i nisu sve makete za svakoga! Neko voli da radi hirurgiju....

[@doctormig2709]

Potpuno se slazem.Sve sto si napisao je tacno.

[@bobbob4652]

Not bad. Get a better brush for the small details and you will get better results.

[@doctormig2709]

Thanks.it is long overdue but I have to order some soon :D

[@laszlonemeth3703]

Hello, what happened to the tail codes?

[@doctormig2709]

Hello :) customers orders :)

[@pacimini]

Dei veri cani. Meglio non farli vedere certi tutorial

[@doctormig2709]

I dont understand what you mean.

[@pacimini]

@@doctormig2709 in this tutorial you made a bad work.

[@doctormig2709]

Oh well ok ;) thanks for the comment :)

[@kennyraicherter1264]

I'm so sick of you super detailers you ruined the industry of not putting in pilots now these company's follow suit shameful I will take the old kits over these new ones any day

[@doctormig2709]

What super details you see on this kit.This is a OOB build.I did not add anything not used any aftermarket stuff to super detail the kit.I really do not understand your comment.

[@Flynnster-qu1gw]

The point of this hobby is for people to do what they please with their model and make them different and more interesting, that's what makes this hobby wonderful. Its all down to your personal preference, what Doctor MiG has done here is a exquisite example of that. Building models the way you describe seems boring and un-interesting to be honest but if you like it then go ahead and I respect that.