Saludos amigo! Yo he trabajado con ambos equipos y con muchos otros modelos de rcf.. hdl 6 ,10 ,30 etc y de rcf para mi gusto es usable la serie TT lo demás solo es agudo extridente y color.. te hablo de una banda sonando no con música.. sonar mucho no es sonar bien.. es mi opinión y esas cajas con una banda de jazz ni reconocen sus instrumentos de lo que colorean.. las dzr están a otro nivel muy superior similar en calidad a las TT y cercanas a las marcas top.. d&b meyer etc.. es mi esperiencia personal eso si.. un abrazo enorme!
Saludos. Estos equipos tienen mucha claridad y separación de frecuencias. La resolución es tremenda. Esto puede ser interpretado como estridente hasta cierto punto según el Gusto sonoro de cada persona. Más estos específicamente como los art945 son hechos para uso touring y ser ecualizados con mixer externo. Hay que entender el uso para lo que fueron hechas. Principalmente las nxl44 son arreglo en línea para tiro largo. Ese empuje de frecuencias medias y altas las describes como estridente más para eso fueron hechas para escuchar de lejos. Las frecuencias medias y altas prominentes pueden controlarse con ecualizacion. Saludos
@@revelationevents2323 unmatched I agree if you want anything close you have to pay $3000 or more and some times that’s not even the case Rcf still comes out winning
Maybe the 945s but I can tell you right now the 932s went back and I kept the DZRs. I really tried to like the RCFs but they just weren’t that good. I thought about trying out the nx932 to see if the wood cabinet helped but I honestly don’t think it will since the low end sounds nice. It’s just the compression driver is crazy harsh when you start pushing them, very unpleasant.
I have been doing a/b comparisons DZR12 against the Art932a (I think they are probably closer in specs) It’s a hard choice to be honest..the RCF highs will rip out your ear drums at higher SPL’s and the sub will bottom out on the Yamahas….at moderate levels they are both amazing.
I don’t have any scientific measurements but my ear aligned with the paper comparison with the edge going to the dzr…of course this is in comparison of the 932 and not the 945. Just being fair, certain frequencies made the low driver make an audible snapping sound on the DZR. It was more noticeable on rock music. I was able to fix it in the crossover, I’m sure you could do it with the eq as well.
Saludos cordiales, una consulta, cual sería estimado su criterio profesional comparando a la RCF 945-A, VS, con la DB TECHNOLOGIES OPERA REEVO212. Cual tendría mayor cobertura y alcance.
Al mismo tiempo el speaker que mencionas es un 12. Según el manufacturados con un máximo spl de 133db. Realisticamente diría un máximo se 128 dB según lo que veo. Eso ni siquiera de acerca al art945. Pero realmente están en categorías diferentes y no deben ser comparados
ALGO QUE ME GUSTA DEL RCF ES QUE LLEGA A LOIMITE Y XDESPUES SE AJUSTA Y VUELVE A SUBIRLE MAS Y AUN TRABAJA BIEN YO TYENIA LAS ART915 Y AUN TRBAQJAN BIEN QUIERO COMPRARME LOS ART945
Ya no queda ninguna duda, me compro una pareja de rcf 945, muchas gracias por estos videos de calidad ya que es lo unico que he encontrado comparando altavoces de este rango de precio no solo en calidad de audio como en potencia sonora real. La unica duda que me queda es si la version de madera (RCF nx 945-a) tendrá una calidad de audio mayor aunque tenga los mismos componentes y amplificador que la version de plastico.
En mi opinión la madera lo Que hace es que le da un poco más de profundidad y resonancia al timbre. Pero recuerda que el 945 tiene un bracket que sostiene la caja de lado a lado dándole una solides parecida a la De la madera, por encima de eso el art 945 pesa menos que la caja de madera. Yo tu me iría por el art945.
No as tenido problema con los RCF 945? No as notado que baja el rendimiento ? Y se calienta mucho? Yo es que tuve los 915 y me bajaba mucho el rendimiento y se calentaba muchísimo y tuve que venderlo
Hermano no se porque te haya pasado eso. Esto no baja ningún rendimiento. Los amplificadores digitales tienden a calentar un poco. Pero tienen un sistema de enfriamiento o disperzacion de calor muy eficiente. Calientan y enfrían. Nunca llegan a calentar mucho de todos modos. Bro son bestias. La mama de la quimciañera viste lo que expresó con lo impactante del volumen de estos speakers. Es importante que te deje saber que estaban a un 65% de su capacidad aproximadamente. Son bestias.
From what I remember the Yamaha had good bass response. The 945 has amazing response too. It depends on the taste of each individual. In my opinion the 945 is superior
Those are the same series but different sizes. The 945 is a 15 with a 4 inch compression driver the 932 is a 12 with a 3 inch compression driver. Which one is better is a question that depends on how and for what you want to use them
Hey how are you? Ful volume is not a physical max position of attenuators but the position that the limit system of the speaker allows if the speaker is limiting at a specific place you should stop there: that’s what I did
Lo importante seria ver hasta que frecuencias bajas esta sacando el RCF, o si los picos del RCF de dB son de medios o de agudos ( tengo entendido que tiene un tweeter más grande?). Lo digo porque los Yamaha DZR sacan bastantes bajos y si no los cortas a alguna frecuencia pues se """"""ahogan pronto""""". solo si los cortas a 60hz (digitalmente como se puede) o así ya ganan perfectamente varios dB
Saludos . Los 945 bajan hasta 45 si no me equivoco. Y lo que tienen nones un tweeter sino un driver de compresión y este de 4 pulgadas. La cantidad de volumen es impresionante. Aún los bajos son excelentes sin usar subs.
@@revelationevents2323 In your video the Yamaha seemed to have more deep bass. I already had the RCF 745 (old version of the 945) it sounds extremely loud, but the treble is hard and the bass not very deep, it hits hard in the mid bass at 80-100 hz but that's it.
@@revelationevents2323 ok thanks bro. I will use it with rcf 8003 mk2 and mk3 i have the both and i cant ear à difference between the both its the same.
@@moisebabdor6207 sometimes updates are slight. Sometimes they are big changes. I don’t know with the subs, but the 9 series on tops is more powerful than the 7 series.
In this video you can hear the difference, the DZR has more deep bass, the RCF sounds very loud but very harsh, unusable in full range without a subwoofer in my opinion
Remember the 945’s are a hybrid between a tour grade speaker and a point source. Those speakers are supposed to be EQed with an external mixer. They still come with an EQ I like a lot and the low response is amazing. Yamaha is also good but it’s just a mater of taste in that sense. What can’t be denied is the fact that there’s no speaker out there that covers a large area with very loud sound like the 945’s
@@revelationevents2323 RCF 945 or 745 has good bass response but only in the upper bass range, without subwoofer the RCF sound too harsh. Wooden speakers like DZR have more deep bass but less overall volume because deep bass requires a lot of power. And, to correctly measure the spl of an speaker you must use a sound level meter set to C weighting. A-weighting does not measure low frequencies, it is done to measure the noise of a tool like a lawn mower for example
@ the 945 have a bracket that sustains the enclosure giving the speaker a similar depth and resonance to that of a wooden cabinet. It’s more like the difference is in the 4 inch compression driver. This thing is a beast. It doesn’t clip unless you get the volume to a point where you would go deaf. Yooo believ me I’ve used them outside and inside in large and medium spaces. These things are from another planet. By the way if you feel Extra pressure in the highs that easily fixed with eq.
@@revelationevents2323 I own RCF 745s which have the same drivers. They sound very loud, it's true, but I don't like them for full range use, they just don't have enough deep bass for that. My cheaper LD Stinger 15AG3s have more deep bass and sound better in full range without a subwoofer than the RCF 745.
@ I understand. And in reality everybody has their own standard for what a speaker sound should be like. But if we look at this from a straight facts point of view we have to realize that the 945 are kind of a hybrid between point source speakers and touring grade systems. These things can sound however you want them too just like any touring grade PA which is with processing. Of course any speaker no mater who made it would sound better with subs. But at the same time the type of raw power/ clarity in the mids and highs and head room these speakers have allow you to do whatever you want with external processing.
Eso es falso, siempre y cuando se conecte a un buen estabilizador de voltaje no va a tener ningún problema. Aqui se trabaja con 120v tambien. Nunca he tenido ningun problema.
Hi. The whole purpose of the video is to find out what the capabilities of both speakers are. The Yamaha sounds really good but doesn’t have the same output power as the Rcf. If you notice when the Yamaha is limiting the Rcf is not even close
Javierayala2141 No hay comparación.! estas cajas contra la Hk Audio linear 5 LTS a, es otro nivel.!! Obviamente como la hk es un parlante de medios y agudos necesitas de un subbajo para que puedas escuchar todo el poder que traen. Para espacios abiertos las Hk son increíbles.!! . Los parlantes que salen en este video RCF y Yamaha en espacios abiertos (para música en vivo) tienden a saturarse y por ende a perder calidad, aquí es donde el alcance (tiro largo que le llaman) de las HK audio se hace notar .!!!! soy músico y he tenido la oportunidad de probar las 3 marcas en cuestión ( Yamaha DZR, RCF 945, HK audio linear 5 LTS a) saludos desde Ecuador. 🎼😊
@@javierayala2141 realmente no he probado ninguno, pero si se que el Lts no es full range. Por lo tanto tiene que ser usado con subs. Lts es un line array en caja de point source.
Saludos. Hermano el yorkville nunca lo he escuchado. Pero por las especificaciones veo que se compara más con el art935a ya que el Driver de compresión es de 3 pulgadas y el nivel de presión de sonido es 133db como el 935. Por mis referencias yo iría con el Rcf ya que el 935 tiene los mismos componentes y misma calidad y claridad de sonido con la excepción del tamaño confession driver. Ósea tiene un poco de menos volumen. Pero todavía es un monstruo. Al mismo tiempo no puedo decirte porque los aya escuchado uno al Lado del otro: quizás en un futuro haga un vídeo comparando los dos. Muchas bendiciones
Just noticed you ran the Yamaha on normal, and the rcf on boosted. I believe FOH would be the equivalent of boosted mode on the Yamaha. Don’t know if it would have made a difference but just an observation….
Hey brother. Thanks for the comment and observation. The first round I do on the Yamaha it is in FOH mode. But anyways the boost on the RCF is just for low response not volumen output . And in my opinion the difference with boost is not really noticeable anyways. So I don’t know why they give that option.
@@revelationevents2323 I do feel the RCF was better but volume aside, would you say the Yamaha is a good speaker? I’m in the market for tops after recently purchasing the 18xlf subs..I’m a matching system guy so was hoping to stay with Yamaha unless they are really bad. Keep in mind, I’m just a DJ doing mostly mobile wedding stuff now so I don’t need rip out your ears loud but I do like to turn up every now and again.
@@jeremyparker6392I have DZR12s and dxs18xlf and they sound fantastic in my opinion, especially when paired together. Sure there may be louder speakers on the market but from a sound quality point of view they are exceptional. Keep in mind I get a lot more volume from the tops when high passed, full range definitely takes it out of them
@@bensmith1195 I ran the dzr12’s solo today…you are right, full range definitely takes the output way down but ultimately, it was passable and it’s not something I plan on doing that often. That being said, I do have a couple rcf 932a sitting in my living room. I’m going to give them a try, it seems like it might be a little bit closer…
Saludos. La serie nx tienes los mismos componente pero en una caja de madera: al mismo tiempo eso de desventaja es en dependencia de lo que estés mirando como variable para concluir eso: ya que el sonido de ambos es bien parecido y el de plástico es menos pesado: así que todo realmente depende de lo que estés buscando:
Es una Dhr15 mas no una Dxr15 allí hay mucha diferencia. Escucha la Dxr15 Vs la Rfc art con instrumentos variados y notarás una diferencia grande de calle la Yamaha le gana. 👍🏻
Solamente preguntaria por que a la YAMAHA si la pones a nivel 0 y la RCF con mas nivel , debe ser igual a 0 pero en fin a para pruebitas que se avientan
El art 945 no tiene atenuador de volumen, el botón solo aumenta la sensibilidad de la señal. Todo para la derecha es el equivalente a cero lo cual es el máximo de señal de línea sin añadir más dB de señal. Ósea es lo mismo todo a la derecha en el Rcf y cero en el Yamaha
Estudia mejor, antes de criticar, en algunos altavoces, el nivel 0 es hasta el tope.... Estudia más, se ve con tu comentario absurdo que no sabes de sistemas originales.
Compara esas RCF con las HK LINEAR 5 115FA, hace unos meses compré esas HK y de veras te aseguro que suenan increíblemente fuerte y para que limiten tienes que llevarlas al máximo... suenan muy muy fuerte.
Hola amigo, lastima que no tengo un video para mostrarte, Pero tuve HK Linear 5 115FA, y RCF pero, en RCF compare el 915. En bajos se oye mejor, HK, para DJ's, Pero en claridad, en cuestión de sonorizar..... RCF tiene una super claridad en los medios, en los brillos de agudos, los puse al límite y HK clipea primero y RCF aguanta un 20% más....
Saludos amigo! Yo he trabajado con ambos equipos y con muchos otros modelos de rcf.. hdl 6 ,10 ,30 etc y de rcf para mi gusto es usable la serie TT lo demás solo es agudo extridente y color.. te hablo de una banda sonando no con música.. sonar mucho no es sonar bien.. es mi opinión y esas cajas con una banda de jazz ni reconocen sus instrumentos de lo que colorean.. las dzr están a otro nivel muy superior similar en calidad a las TT y cercanas a las marcas top.. d&b meyer etc.. es mi esperiencia personal eso si.. un abrazo enorme!
Saludos. Estos equipos tienen mucha claridad y separación de frecuencias. La resolución es tremenda. Esto puede ser interpretado como estridente hasta cierto punto según el
Gusto sonoro de cada persona. Más estos específicamente como los art945 son hechos para uso touring y ser ecualizados con mixer externo. Hay que entender el uso para lo que fueron hechas. Principalmente las nxl44 son arreglo en línea para tiro largo. Ese empuje de frecuencias medias y altas las describes como estridente más para eso fueron hechas para escuchar de lejos. Las frecuencias medias y altas prominentes pueden controlarse con ecualizacion. Saludos
Rcf is top notch they have been outclassing aot of pa brands
@@Mr.Brolic RCF is the big daddy right now. I don’t care what no one says. I have tried them side by side with many
@@revelationevents2323 unmatched I agree if you want anything close you have to pay $3000 or more and some times that’s not even the case Rcf still comes out winning
Maybe the 945s but I can tell you right now the 932s went back and I kept the DZRs. I really tried to like the RCFs but they just weren’t that good. I thought about trying out the nx932 to see if the wood cabinet helped but I honestly don’t think it will since the low end sounds nice. It’s just the compression driver is crazy harsh when you start pushing them, very unpleasant.
Would you say the yamaha is a warmer sound? Thanks
Probably yes. Wood cabinets tend to sound warmer, at the same time most of it is EQ
Thanks would you say the rcf sounds a lot better then the dzr15s, just thinking of buying a pair,
@@LiamJulian-x1i this is a matter of opinion but yes I do.
I have been doing a/b comparisons DZR12 against the Art932a (I think they are probably closer in specs) It’s a hard choice to be honest..the RCF highs will rip out your ear drums at higher SPL’s and the sub will bottom out on the Yamahas….at moderate levels they are both amazing.
which one has the most bass for playing in full range at moderate volume ?
I don’t have any scientific measurements but my ear aligned with the paper comparison with the edge going to the dzr…of course this is in comparison of the 932 and not the 945.
Just being fair, certain frequencies made the low driver make an audible snapping sound on the DZR. It was more noticeable on rock music. I was able to fix it in the crossover, I’m sure you could do it with the eq as well.
RCF forever ❤😊
Saludos cordiales, una consulta, cual sería estimado su criterio profesional comparando a la RCF 945-A, VS, con la DB TECHNOLOGIES OPERA REEVO212. Cual tendría mayor cobertura y alcance.
Saludos. Nunca he probado equipos DB technologies. No tengo referencia real de ellos:
Al mismo tiempo el speaker que mencionas es un 12. Según el manufacturados con un máximo spl de 133db. Realisticamente diría un máximo se 128 dB según lo que veo. Eso ni siquiera de acerca al art945. Pero realmente están en categorías diferentes y no deben ser comparados
Gracias bro
Un gusto hermano. Cualquier pregunta que tengas sobre el tema me dejas saber.
ALGO QUE ME GUSTA DEL RCF ES QUE LLEGA A LOIMITE Y XDESPUES SE AJUSTA Y VUELVE A SUBIRLE MAS Y AUN TRABAJA BIEN YO TYENIA LAS ART915 Y AUN TRBAQJAN BIEN QUIERO COMPRARME LOS ART945
Ya no queda ninguna duda, me compro una pareja de rcf 945, muchas gracias por estos videos de calidad ya que es lo unico que he encontrado comparando altavoces de este rango de precio no solo en calidad de audio como en potencia sonora real. La unica duda que me queda es si la version de madera (RCF nx 945-a) tendrá una calidad de audio mayor aunque tenga los mismos componentes y amplificador que la version de plastico.
En mi opinión la madera lo
Que hace es que le da un poco más de profundidad y resonancia al timbre. Pero recuerda que el 945 tiene un bracket que sostiene la caja de lado a lado dándole una solides parecida a la
De la madera, por encima de eso el art 945 pesa menos que la caja de madera. Yo tu me iría por el art945.
Ay un rcf 945 en madera
I change my art 945 for nx 945.... more bass more powerful more warm and more good sound nx 945 🎉🎉
@@joseluisgonzalezmendoza7797 la serie NX es de madera. El NX945a tiene los mismos componente pero con caja de madera.
@@revelationevents2323 si, probablemente el mayor peso y precio no justifique la poca ganancia en calidad que proporciona
Mejor sonido y más equilibrado y profesional el DZR
Excelente hermano. Por eso existen muchas marcas que consiguen clientes y seguidores aún sean diferentes. Porque para gusto se hicieron los colores
No as tenido problema con los RCF 945? No as notado que baja el rendimiento ? Y se calienta mucho? Yo es que tuve los 915 y me bajaba mucho el rendimiento y se calentaba muchísimo y tuve que venderlo
Hermano no se porque te haya pasado eso. Esto no baja ningún rendimiento. Los amplificadores digitales tienden a calentar un poco. Pero tienen un sistema de enfriamiento o disperzacion de calor muy eficiente. Calientan y enfrían. Nunca llegan a calentar mucho de todos modos. Bro son bestias. La mama de la quimciañera viste lo que expresó con lo impactante del volumen de estos speakers. Es importante que te deje saber que estaban a un 65% de su capacidad aproximadamente. Son bestias.
Brutal
RCF915 me gusta su sonido potente🎉🎉🎉
Which speaker can produce the most bass in fullrange mode without subwoofer ?
Does the Yamaha wooden box make a difference for bass ?
From what I remember the Yamaha had good bass response. The 945 has amazing response too. It depends on the taste of each individual. In my opinion the 945 is superior
Gran video. La Yamaha dice que baja a 34 Hz, mientras que la RCF a 45. Se nota? Gracias.
Saludos. Honestamente no lo note mucho. La respuesta baja del Rcf es muy buena y potente, el Yamaha tiene buena respuesta también
on flat eq the DZR sounds very flat, you have to activate D contour to have deep bass.
Which one better speakers sir
Art 945a
Art 932a??
Those are the same series but different sizes. The 945 is a 15 with a 4 inch compression driver the 932 is a 12 with a 3 inch compression driver. Which one is better is a question that depends on how and for what you want to use them
@@revelationevents2323 932 RCF 💯
I dont understand this test, if you want to check which one can give you high spl or db so putt them both on full volume and then check the db
Hey how are you? Ful volume is not a physical max position of attenuators but the position that the limit system of the speaker allows if the speaker is limiting at a specific place you should stop there: that’s what I did
Lo importante seria ver hasta que frecuencias bajas esta sacando el RCF, o si los picos del RCF de dB son de medios o de agudos ( tengo entendido que tiene un tweeter más grande?). Lo digo porque los Yamaha DZR sacan bastantes bajos y si no los cortas a alguna frecuencia pues se """"""ahogan pronto""""". solo si los cortas a 60hz (digitalmente como se puede) o así ya ganan perfectamente varios dB
Saludos . Los 945 bajan hasta 45 si no me equivoco. Y lo que tienen nones un tweeter sino un driver de compresión y este de 4 pulgadas. La cantidad de volumen es impresionante. Aún los bajos son excelentes sin usar subs.
@@revelationevents2323 In your video the Yamaha seemed to have more deep bass. I already had the RCF 745 (old version of the 945) it sounds extremely loud, but the treble is hard and the bass not very deep, it hits hard in the mid bass at 80-100 hz but that's it.
Hi bro rcf 945 vs 745 mk4 ? What do you think about it?
Los 945 tienen mas volumen y los 745 un poco de mejor respuesta Baja. Los dos son monstruos.
@@revelationevents2323 ok thanks bro.
I will use it with rcf 8003 mk2 and mk3 i have the both and i cant ear à difference between the both its the same.
@@moisebabdor6207 sometimes updates are slight. Sometimes they are big changes. I don’t know with the subs, but the 9 series on tops is more powerful than the 7 series.
Qual Caixa você escolheu em todos os Aspectos?
Rcf 100%
@@revelationevents2323 Obrigado pela resposta meu Amigo 🙏
In this video you can hear the difference, the DZR has more deep bass, the RCF sounds very loud but very harsh, unusable in full range without a subwoofer in my opinion
Remember the 945’s are a hybrid between a tour grade speaker and a point source. Those speakers are supposed to be EQed with an external mixer. They still come with an EQ I like a lot and the low response is amazing. Yamaha is also good but it’s just a mater of taste in that sense. What can’t be denied is the fact that there’s no speaker out there that covers a large area with very loud sound like the 945’s
@@revelationevents2323 RCF 945 or 745 has good bass response but only in the upper bass range, without subwoofer the RCF sound too harsh.
Wooden speakers like DZR have more deep bass but less overall volume because deep bass requires a lot of power.
And, to correctly measure the spl of an speaker you must use a sound level meter set to C weighting.
A-weighting does not measure low frequencies, it is done to measure the noise of a tool like a lawn mower for example
@ the 945 have a bracket that sustains the enclosure giving the speaker a similar depth and resonance to that of a wooden cabinet. It’s more like the difference is in the 4 inch compression driver. This thing is a beast. It doesn’t clip unless you get the volume to a point where you would go deaf. Yooo believ me I’ve used them outside and inside in large and medium spaces. These things are from another planet. By the way if you feel
Extra pressure in the highs that easily fixed with eq.
@@revelationevents2323 I own RCF 745s which have the same drivers.
They sound very loud, it's true, but I don't like them for full range use, they just don't have enough deep bass for that.
My cheaper LD Stinger 15AG3s have more deep bass and sound better in full range without a subwoofer than the RCF 745.
@ I understand. And in reality everybody has their own standard for what a speaker sound should be like. But if we look at this from a straight facts point of view we have to realize that the 945 are kind of a hybrid between point source speakers and touring grade systems. These things can sound however you want them too just like any touring grade PA which is with processing. Of course any speaker no mater who made it would sound better with subs. But at the same time the type of raw power/ clarity in the mids and highs and head room these speakers have allow you to do whatever you want with external processing.
Acá en México dicen que la rcf se quema fácilmente porque solo trabaja con 115 voltios y acá se usa 120 o 127 voltios
Eso es falso, siempre y cuando se conecte a un buen estabilizador de voltaje no va a tener ningún problema. Aqui se trabaja con 120v tambien. Nunca he tenido ningun problema.
La versión poderosa de yamaha es la DZR15 315DW esa deberías probar, es de 3 vías, hf, mh y lf ... esa sí se come a cualquiera
No sería una comparación justa, habría que compararlo contra el RCF NX 985-a
@@TheSery7 espero con ansias jaja
Las de 3 vias ya estan en otra categoria 😂 no te paces
Cual tiene mejor calidad de sonido ?
Rcf…. Más separación y definición. Aunque la Yamaha es bastante buena
Cuánto cuesta el rcf?
El precio del
manufacturador es de $2000 Pero hoy día se consigue en $1600 y algo
limiter goes in at 12 a clock? you should lower you´re input level!
Hi. The whole purpose of the video is to find out what the capabilities of both speakers are. The Yamaha sounds really good but doesn’t have the same output power as the Rcf. If you notice when the Yamaha is limiting the Rcf is not even close
Solo una pregunta pero darás prueba de diferentes marcas de bajo para poder comparar? Gracias
Si. Tengo planificado en el
Futuro cercano hacer prueba de bajos y de tops 12 pulgadas
Lesquels des 2 produits donne un meilleur qualité de son ?
The DZR
A mi me gusta más el RCF. Tiene transparencia y más volumen, pero el Yamaha suena muy bien también
Rcf 945a
Que opinas de Hk audio.??
En especifico linear 5
Comparandolo con esa rcf 945.??
No he probado ningún HK audio. No supiera decirte.
Javierayala2141 No hay comparación.! estas cajas contra la Hk Audio linear 5 LTS a, es otro nivel.!! Obviamente como la hk es un parlante de medios y agudos necesitas de un subbajo para que puedas escuchar todo el poder que traen. Para espacios abiertos las Hk son increíbles.!! . Los parlantes que salen en este video RCF y Yamaha en espacios abiertos (para música en vivo) tienden a saturarse y por ende a perder calidad, aquí es donde el alcance (tiro largo que le llaman) de las HK audio se hace notar .!!!! soy músico y he tenido la oportunidad de probar las 3 marcas en cuestión ( Yamaha DZR, RCF 945, HK audio linear 5 LTS a) saludos desde Ecuador. 🎼😊
@aleemilianojazzar5522. Yo me referia al top 115 fa linear 5..
No al LTS .!!
El lts..no tiene competencia..
@@javierayala2141 realmente no he probado ninguno, pero si se que el Lts no es full range. Por lo tanto tiene que ser usado con subs. Lts es un line array en caja de point source.
A mi guata el Fbt vertus 112a y tambie el Rcf 945 y Yamaha dxr12 mk2
Y rcf vs yorkvilkd ef15 cual me recomendaria, se lo agrazeceria mucho
Saludos. Hermano el yorkville nunca lo he escuchado. Pero por las especificaciones veo que se compara más con el art935a ya que el
Driver de compresión es de 3 pulgadas y el nivel de presión de sonido es 133db como el
935. Por mis referencias yo iría con el Rcf ya que el 935 tiene los mismos componentes y misma calidad y claridad de sonido con la excepción del tamaño confession driver. Ósea tiene un poco de menos volumen. Pero todavía es un monstruo. Al mismo tiempo no puedo decirte porque los aya escuchado uno al
Lado del otro: quizás en un futuro haga un vídeo comparando los dos. Muchas bendiciones
Just noticed you ran the Yamaha on normal, and the rcf on boosted. I believe FOH would be the equivalent of boosted mode on the Yamaha. Don’t know if it would have made a difference but just an observation….
Hey brother. Thanks for the comment and observation. The first round I do on the Yamaha it is in FOH mode. But anyways the boost on the RCF is just for low response not volumen output . And in my opinion the difference with boost is not really noticeable anyways. So I don’t know why they give that option.
@@revelationevents2323 I do feel the RCF was better but volume aside, would you say the Yamaha is a good speaker? I’m in the market for tops after recently purchasing the 18xlf subs..I’m a matching system guy so was hoping to stay with Yamaha unless they are really bad. Keep in mind, I’m just a DJ doing mostly mobile wedding stuff now so I don’t need rip out your ears loud but I do like to turn up every now and again.
@@jeremyparker6392 of course they are. They sound great. And have very good power.
@@jeremyparker6392I have DZR12s and dxs18xlf and they sound fantastic in my opinion, especially when paired together. Sure there may be louder speakers on the market but from a sound quality point of view they are exceptional. Keep in mind I get a lot more volume from the tops when high passed, full range definitely takes it out of them
@@bensmith1195 I ran the dzr12’s solo today…you are right, full range definitely takes the output way down but ultimately, it was passable and it’s not something I plan on doing that often.
That being said, I do have a couple rcf 932a sitting in my living room. I’m going to give them a try, it seems like it might be a little bit closer…
Rcf top
С первых звуков слышно что RCF звучит намного плотнее и в то же время очень ярко… я лично предпочитаю RCF…но это на мой вкус…
Bueno los RCF la única gran desventaja es que son de plástico
Saludos. La serie nx tienes los mismos componente pero en una caja de madera: al mismo tiempo eso de desventaja es en dependencia de lo que estés mirando como variable para concluir eso: ya que el sonido de ambos es bien parecido y el de plástico es menos pesado: así que todo realmente depende de lo que estés buscando:
NX pour installation fixe et même qualité que la version moulée
Yo tengo una Yamaha dhr15 y estoy muy contento con su sonido pero si rcf es otro nivel
El DZR15 es tremendo, me gusta mucho. Pero el Rcf es otra cosa.
@@revelationevents2323 si la verdad Yamaha es muy buena yo no compre rcf porq no me alcanzó ese día pero la escuché y es una bestia
Es una Dhr15 mas no una Dxr15 allí hay mucha diferencia. Escucha la Dxr15 Vs la Rfc art con instrumentos variados y notarás una diferencia grande de calle la Yamaha le gana. 👍🏻
Nombre de la canción?
Hasta abajo. Esto es un track que tengo del bpm latino DJ pool. Parte de hacer mis edits aveces cuando me gustan las compro de allí.
Faz um comparativo por favor da DZR15 yamaha e a PRX915 jbl e se possível depois um com as 3 juntas
Voy a ver si puedo conseguir el jbl… saludos
Rcf alwais beter i hawe rcf art 912 pare it amaizing
Solamente preguntaria por que a la YAMAHA si la pones a nivel 0 y la RCF con mas nivel , debe ser igual a 0 pero en fin a para pruebitas que se avientan
El art 945 no tiene atenuador de volumen, el botón solo aumenta la sensibilidad de la señal. Todo para la derecha es el equivalente a cero lo cual es el máximo de señal de línea sin añadir más dB de señal. Ósea es lo mismo todo a la derecha en el
Rcf y cero en el Yamaha
Estudia mejor, antes de criticar, en algunos altavoces, el nivel 0 es hasta el tope.... Estudia más, se ve con tu comentario absurdo que no sabes de sistemas originales.
Ja ja ja @@JesusGalvan-i8j
Compara esas RCF con las HK LINEAR 5 115FA, hace unos meses compré esas HK y de veras te aseguro que suenan increíblemente fuerte y para que limiten tienes que llevarlas al máximo... suenan muy muy fuerte.
Saludos hermano. No tengo ninguna hk en el momento. He pensado en las linear 9. Pero no las he podido conseguir todavía.
Hola amigo, lastima que no tengo un video para mostrarte, Pero tuve HK Linear 5 115FA, y RCF pero, en RCF compare el 915.
En bajos se oye mejor, HK, para DJ's, Pero en claridad, en cuestión de sonorizar..... RCF tiene una super claridad en los medios, en los brillos de agudos, los puse al límite y HK clipea primero y RCF aguanta un 20% más....
@@JesusGalvan-i8j son unas bestias. Imagínate si eso es el 915 lo que hace el 935 y 945…..
yamaha sounds way better
😂😂 No
La Yamaha limit direct et a moins de Decibels et les aigues sont moins perceptibles donc compression d aigues inferieur a la 945
Yamaha is cheap chinese junk
These speakers are good. They don’t compare to the Rcf but they are not bad at all
@@revelationevents2323 Yamaha can be compared to FBT X series. That's the same range.