Love all of your videos - thanks so much for sharing. Looking at heat presses for days - finally decided upon this one after looking at a couple of your videos. Beautiful granddaughter- so adorable! Thanks again. ❤
Great video. Just a thought, you might want to move your cord to around the back of your press. You had it going around the front of the neck of the press close to the heat source.
I'm about to pull the trigger on this particular heat press....your video is SO helpful in the decision making! it's great to actually seethe press in action...do you possibly have links to the supplies, like the type of paper you need to print the image on to heat press it onto the shirt? thank you for such a wonderful, thorough walk through! :)
Here are a couple of example videos with supplies in the description: ruclips.net/video/hZ1bWYlGfRo/видео.html ruclips.net/video/Gf1JUDErNgw/видео.html
Have you done screen print transfers on 100% cotton t shirts? If so, what temp, for how long and what pressure? I’m having a very hard time finding the right setting for this.
Can’t find the hardware to attach the secondary handle. Do you know what size hex screws and washers I need to attach the handle? Is there any other pieces I need besides the handle, screws and washers? Thanks!
If anyone runs Into a similar issue, if you take off the back cover, check the connection of the green connector, mine came completely disconnected and once I plugged it up it worked fine after
My HPN 15x15 slide out drawer doesn’t slide all the way in. Have you had had this problem? Mines is brand new. It also constantly beep when I’m trying to set up temp and duration. I pressed the ok button and nothing happens.
For 8-1/2 x 10 and 8-1/2 x 14, I use an Epson 2720 with Hiipoo ink. For 11 x 17 and 13 x 19, I use a Sawgrass SG1000 with the bypass, and with Sawgrass ink ($$$$)
I just got this for my ministry work . Thank you for taking the time to walk us through the set up and press. thumbs up!
Appreciate your video. Good job and your great granddaughter is a doll. God bless you guys.
Great video. I purchased the same heat press and stand. Thanks for both videos.
Thank you for the quick instructions. My machine is brand new and the buttons don't work.
Paisley is so cute! Thanks for the video. It answered my "beginner" questions.
Excellent review!
awesome video, loads of info, and paisley adorable thanks
Roger thx for sharing I bought that one too
Perfect! Thank you! 🙏
Thank you sir!
Thanks for the video. I've been looking at the 16x20 swing away but I also lack space. The shirt was adorable.
Since the base slides out, it works well for what I need it for. I have one other swing away press, and it does require "twice the space".
Love all of your videos - thanks so much for sharing. Looking at heat presses for days - finally decided upon this one after looking at a couple of your videos. Beautiful granddaughter- so adorable! Thanks again. ❤
I bought this heat press also. Hasn’t made it out of the box yet.
Great video. Just a thought, you might want to move your cord to around the back of your press. You had it going around the front of the neck of the press close to the heat source.
Only in this demo due to length restriction to power outlet. I have since mounted a heavy duty power strip to the cart with a long cord.
I'm about to pull the trigger on this particular heat press....your video is SO helpful in the decision making! it's great to actually seethe press in action...do you possibly have links to the supplies, like the type of paper you need to print the image on to heat press it onto the shirt? thank you for such a wonderful, thorough walk through! :)
Here are a couple of example videos with supplies in the description: ruclips.net/video/hZ1bWYlGfRo/видео.html ruclips.net/video/Gf1JUDErNgw/видео.html
Have you done screen print transfers on 100% cotton t shirts? If so, what temp, for how long and what pressure? I’m having a very hard time finding the right setting for this.
Sorry, do not do screen prints
When not being used do you store a heat press in the open or closed position?
Open. This keeps tension off the springs.
Can’t find the hardware to attach the secondary handle. Do you know what size hex screws and washers I need to attach the handle? Is there any other pieces I need besides the handle, screws and washers? Thanks!
The screw and washer for this was already in the press. I just removed it and mounted the handle with it.
Out of the box mine instantly says the current temp is 462, but isn't getting hot at all and won't lock down
Contact Heat Press Nation. I am not affiliated with them.
@rogersshop I am, just venting, hoping someone knows something lol. Thank you though
If anyone runs Into a similar issue, if you take off the back cover, check the connection of the green connector, mine came completely disconnected and once I plugged it up it worked fine after
My HPN 15x15 slide out drawer doesn’t slide all the way in. Have you had had this problem? Mines is brand new. It also constantly beep when I’m trying to set up temp and duration. I pressed the ok button and nothing happens.
No problems here. Contact the company if you are having issues. This is NOT a sponsored video!
Roger, what printer and sublimation ink you use? Thanks
For 8-1/2 x 10 and 8-1/2 x 14, I use an Epson 2720 with Hiipoo ink. For 11 x 17 and 13 x 19, I use a Sawgrass SG1000 with the bypass, and with Sawgrass ink ($$$$)
how can i turn offf the sound please ?
What about setting the pressure? What do you set that to?
That depends on the project and can be "subjective" as to what "light, medium, heavy, and very heavy" is.
I'm having trouble with mine going to the set temp. I have it set to 325 degrees but the pv number stays on 031? any advice on how to fix this?
Any luck?
Hey love where do you find your good quality kids shirts I need flannels and shirts
Amazon, mostly.