How to make a powerful generator 220V | DIY Mini generator 2020
HTML-код
- Опубликовано: 4 окт 2024
- 60x10x4mm Magnet bit.ly/2WnbeU5
Copper wire bit.ly/2TZ1Jc3
5x10x4mm Bearing bit.ly/2Qs1dRJ
Contact us
Email: singoeurnsok@gmail.com
FB Page : bit.ly/3pWPlWZ
Support us
www.paypal.com...
How to make a powerful generator 220V | DIY Mini generator 2020
Related Videos
1. How to make DC motor at home , homemade electric motor easy
• How to make DC motor a...
2.How to create robotic at home , Homemade small robot 2017
• How to create robotic ...
3.How to make soldering iron using lighter
• How to make soldering ...
4.How to make scrill machine at home using spray can and small motor
• How to make scrill mac...
5.Homemade a small and fast car for kids
• Homemade a small and f...
6.How to make 220V solinoid engine at home
• How to make 220V solin...
7.How to make super transformer at home
• How to make super tran...
8.How to make foam cutter at home
• How to make foam cutte...
9.How to make mini grill stove at home
• How to make a mini gri...
10.Free energy device
• Free energy device new...
11.Boost converter using small NPN transistor and 1.5 V AA battery
• Boost converter using ...
12.Motor as generator 2017, Homemade generator from DC motor
• Motor as generator 201...
13.Motor as generator , Homemade motor generator from old vcd player
• Motor as generator , H...
14.Motor as generator from small motor, Energy of small motor homemade 2017
• Motor as generator fro...
15. How to make scrill machine using 12V DC motor very easy , homemade scrill tool 2017
• How to make scrill mac...
16.V3 Solinoid engine whit 3 7 V, A powerful machine made in 2017
• Video
17.Wireless Electricity Transmission Review made in 2017 , New Project 2017
• Wireless Electricity T...
18.How to make electricity wireless transmittion 2017 step by step
• How to make electricit...
19.How to make Easy motor at home 2017
• How to make Easy motor...
20. Phone charging using small battery
• Phone charging using s...
21.Free energy , from small to a powerful energy, Phone charging using 1 5V AAA small battery
• Free energy , from sma...
22.How to make a powerful air pump at home very very strong
• How to make a powerful...
23.How to make 3V Battery from coopper wire
• How to make 3V Battery...
24.How to make mini Hydrogen Generator at home very easy
• How to make mini Hydro...
25.How to make an Electricity Generator from old HDD motor
• How to make an Electri...
26.How to make a mini flashlight 5W
• How to make a mini fla...
27.Amazing life hack , Easy way to cut roof (Zn panel) using wire
• Video
28.My Electronic lock desk , new idea created in 2017
• My Electronic lock des...
29.Free Energy , Homemade Free Energy Device From Syringe And Water
• Free Energy , Homemad...
30.Free Energy , Free Energy from magnetic, magnet motor 2017
• Free Energy , Free Ene...
31.Free Energy , How to make solar cell from LED, LED Vs Solar cell, homemade 2017
• Free Energy , How to m...
32.Free Energy , solar energy, capacitor charging LED as solar cell
• Free Energy , solar en...
33.Free Energy, Solar Energy, homemade easy solar cell 2017
• Free Energy, Solar Ene...
34.Quad motor helicopter Vs Single motor helicopter, homemade mini helicopters
• Quad motor helicopter ...
35.How to make V2 water pump at home , new model of water pump 2017
• Video
36.How to upgrade 3v DC motor to a high speed and strong motor
• How to upgrade 3v DC m...
37.How to make a mini water pump at home very easy, Homemade 2017
• How to make a mini wat...
38.homemade easy motor from CD panel 2017, a strange motor for 2017
• homemade easy motor fr...
39.ir remote control testing up to 40 meters range, homemade ir remote control without any ic
• ir remote control test...
40.High voletage capacitor, super capacitor , how to charge capacitor
• High voletage capacito...
41.Super motor , homemade easy motor 2017 , new idea to create motor
• Video
42.Free energy, solar copper wire, new idea to create solar cell
• Free energy, solar cop...
43.Very small battery, how to make a small battery at home very easy
• Very small battery, ho...
44.Homemade scrill machine very easy 2017 , a powerful tool
• Homemade drill machin...
45.homemade coilgun , a powerful coilgun 2017 part 1
• homemade coilgun , a p...
46.Homemade coilgun, a powerful coilgun 2017 (part 2)
• Video
47.Free energy, diode as solar cell, new idea to make solar cell 2017
• Free energy, diode as ...
48.How to make spot welding machine at home 2017
• How to make spot weldi...
![KAYTRANADA - Witchy (feat. Childish Gambino) [Official Video]](http://i.ytimg.com/vi/jGK3YVmGZ3Y/mqdefault.jpg)
Instructions unclear. I accidentally built a nuclear reactor...
Lmfao
@Energy - Health it's called a joke. Read his comment again*😡
1- this is a joke
2- atoms have negative electrons around their core and stable netrons and postitive protons in their core the core can only be changed using a nuclear explosion and nuclear rectors extract the energy from the mass which in case you didnt know the nuclear equation is E = mc2
and no atom in this intire world dosnt have electrons
Wait I’m so confused... how can someone actually believe that electrons don’t exist. Like wtf? Dev En is 100% correct, both that the comment was originally a joke, and nuclear physics is dependent on molecular configuration. Electrons in nuclear physics are excited and energized when shot with a CRT beam. That’s how pulsar stars pulse gama ray radiation. The radioactive emission just comes from excited electrons loosing energy when shifting from one valence shell of the atom to another. Literally electronics as a whole work by a flow of negative potential energy... ELECTRONS!!! smh imagine being the poor electron who had to transmit the data for s smooth brain comment saying it doesn’t exist. Well done, you’ve topped the flat earth theory. Just wondering, do you also not believe in protons and neutrons or is it just the electrons... genuinely curious?
Nice example of a simple AC motor. As usual: Maximise number of turns around a decent iron core; maximise strength of magnets and number of poles; minimise gap between magnets and core.
Why an iron core?
Large number of turns - smaller wire. Heavier cable - stronger magnet field. 220V output
You can see on photo, how author made 6x1 flat winding on an iron core. It is a good practise, but not a must in all cases. If you want to know more about generator winding and electromagnetism, please read
I was so happy when the midroll ad started. Even though this advert has run a million times, it was still 100% less annoying then the 10th play through of the whistle music this person put in as their audio background..
OMG! He just keeps restarting it!?!
Hey bro it’s been 3 years, have you discovered the audio button yet?
Bravo!!! I na kraju je uhvatio sijalicu golim rukama a napon 220 naizmenicne stuje.GENIJE !!!!!
Yeah you have a piont... but I think he only touched the + with out the -
This video will help me during the zombie apocolypse when there is no electricity.
You know.. It would be nice if you’d actually include verbal steps in the video..
It doesent matter...this is a crap generator with massive opposition torque
@@blainevans7047 🤭😅😅 what a description
FAKE 100% all his video Do Not believe it.
yes that wouldve been helpful
Yeah that is what I needed from this I'm doing a school project and I needed to know how to make one
Hey thanks. This is helpful for my students to see how to make a manual generator.
Making a powerful generator 220V is simple. To maximize the number of turns around a decent iron core, use high-strength magnets and a lot of poles. The gap between the magnets and the core should be minimized. This will create a powerful 220V AC electric current.
when you're called american tech, but you actually use metric in the description
Metric is the scientific mesaurement.
@@foty8679 , American still use imperial system
America it's not just the us and you must use the international unit system in order to everyone to build anything someone made, only a few countries use the english system
@@suicidemuffin6256 ?
Idk why but it seems funny to me to make a generator and then power it with an electric dc motor 😂
Lol go and read. Consider generating hydroelectric power. The motor serves as a water turbine. In this case there's no hydropower plant so he uses a powered motor!!
@@festusabiola7403 He could have simulated it with some sort of water flow to make it cooler but using the generator and the dc motor is basically making power with 2 motors already.
Yo that was smart and super handy,, using the drill press like a scroll saw 👍
The good thing about the screws is that they conduct magnetic field since they're made of metal.
Or is there a way, right at the point of charge when the magnets passing over the metal and it's generating electricity, is there a way to possibly make it feedback on itself at its peak and increase the charge?
thats called perpetual motion machine
also known as "where's the hidden battery"
it breaks laws of physic
most often its thermodynamics i think
@@femboyelectronics6441 I was more thinking of a static machine where minimal movement was involved, a completely redesigned setup. Maybe by having two magnets back-to-back bouncing between two other opposing magnets that are constantly pushing in opposing directions like a clock pendulum swiping past a copper wrapped rod. Depending on the length of the pendulum and the position of the magnets you might be able to get a very steady fast click click click
@@robertruiz98 it could work if u.used electromagnets
but u can't make it work without using energy u need to put some form of energy into it for it to work.
perpetual motion violates laws of physics
It is often asked if there is a way to make a powerful generator 220V. The answer is yes, it is possible to make a generator 220V more powerful by feedbacking on itself at its peak. This can be done by using a metal that is attracted to magnets and passing the magnets over the metal to generate electricity. When the electricity is at its peak, the metal will feedback on itself and increase the power output.
Utility grade generators use electromagnets rather than regular ones because the stronger the magnetic field, the more that is produced. This is part of why you can't start a modern power plant without some sort of electricity.
What exactly is the point of making a video that explains nothing??? Doesn't say how many wraps went into the coil, what the blue material used was. But at least we had some really groovy background music.
But how much power is needed to rotate that generator ,iiis the challenge question.
How many number turns of copper wire on each coil? Would have been handy to include such basic information as text while editing the video. If this was done it would have deserved a thumbs up.
yeah
half of the spool on each side dude... it doesn't actually matter, as long as there's enough to attach to the wire aswell, it's fine
I understand this was a year ago, but you could still be working on this, idk
If you're looking to build a powerful generator, you'll need to pay attention to the number of turns of copper wire on each coil. It's important to get this number right, as too few turns will result in a weak generator, while too many turns will cause it to overheat. Including this information in the video would have been helpful, as it would have saved viewers from having to do their own research. However, even without this information, the video is still informative and deserves a thumbs up.
@@lambda3553 It would have been handy to include such basic information as the number of turns of copper wire on each coil while editing the video. If this had been done, it would have deserved a thumbs up.
Can you make another one telling us how to connect it to stuff like solar panels and water turbines and wind turbines
I think from here to connect it all you need to do is have an attachment that fits the end on your turbine the way the drill fit in this video and when your turbine spins it will create the kinetic energy required to generate your power.
Why would you want to connect it to a solar panel?
If this is a generator, you wouldn't connect it to a solar panel or any turbine. This generates electricity like a solar panel or turbine. So you would connect it to a fillable battery
It is possible to make a powerful generator that can be connected to solar panels, water turbines, and wind turbines. First, you will need to purchase a generator. Second, you will need to purchase the necessary connection cables. Finally, you will need to follow the instructions that come with the generator to connect it to the solar panels, water turbines, and wind turbines.
@@slimxshady6111 What kind of battery would you recommend?
成本高>>>效率底=用作實驗都可以..多謝分享.
I've only done a tiny bit of research into this, but wouldn't by adding 3 copper wires allow the magnet to turn on its own without the use of the motor?
What kinda physics are you studying
Se me hace que si le quitas los tornillos para que el campo magnético de los imanes sea mas potente e inducido a la bobina te generara mas voltaje por que los tornillos atrapan campo y no dejan o permiten que se aproveche todo en la bobina.. Coméntanos después de hacer la prueba... saludos buen video!
Wow I like it keep it up we love your amazing inventions😁😀👍
Idea, instead of using a drill, make a cog/gear set up, with a crank, so you pust a 100 tooth cog wich turns the normal 10 gear cog, though more manual labour its more electricity effective
Im pretty sure he used a dc motor just to show that it works and generates the high voltage
Could someone answer a question (which may or may not have an obvious answer) ......... if you put this generator under water, how would it affect the generator's ability to generate electricity, would it completely nullify it or would it still create some current ??
It should work until any piece of wire is exposed which will short the circuit
So, how is that powerful? what is its output? watts, amps, volts,anything? numbers pls
Copper wire size? And turns for each coil?
can a single coil like those be made to produce 30-50amps and 12-15 volts? or even 8 volts but the same amount of amps?
thin wire on 50 amps? No sir. Unless you want copper candle lol
@@jinxx_z5125 wasn't talking about thin or thick wire just the concept can a coil like that produce let's say 30-50 amps with 12-24 volts and if yes then I would ask for size of the wire and shape
@@mohammadhashemi1771 it would be expensive and inefficient
@@jinxx_z5125 the price is not important and inefficiency too
@@mohammadhashemi1771 k
Playback speed 2x 😁🤘
I mean, it seems so cool, but...doesn't it have a so low current ? 'Cause it's generating 220vca, but not even that small bulb turns on at its max power.
Must be false advertising
?????????????????????????????? it's 220 volts... a normal LED usually takes 2-4 volts???????????????????????
The generator model is very cool
hhh my friend how you touch 220 volt current on hand. You touch the bulb from bottom
Судя по накалу лампочки нет там 220 вольт, поэтому ты не показал на мультиметре, там вольт 90 максимум
What is the blue pieces made from?
Are metal bolts used for a reason? I feel like that would create extra resistance as the magnets rotate. Can they not be something like pvc instead?
The copper wire needs to be wrapped around iron to produce a charge
So you power the magnet with another motor that needs electricity?
Hello AT. Trying to find the name of the title/artist of the background music for the video you uploaded July 19, 2019 - Making a mini metal detector. Thanks.
How the rotor is made, what type magnet used???
He says it in the video.
Neodymium magnets
It's a cool video, idc what any of the hates say, that was pretty bad a$$
Show the output using the multimeter
Excellent job, congratulations. can you tell me what current this generator is generating?
it says...in the title
220 volts
Is this blue board made from pvc?
11:31 lmao he touched the contacts and got shocked...
The resistance of his skin is higher than the filament of the bulb. He must be isolated from the ground, so the voltage potential across his body is zero and no current can flow.
@@EnfermeiroPensador Yea, i dont think he got shocked
Very cool! Is it necessary for the metal bolts to be metal? What I am asking is could you theoretically cad and 3d print the spools for the wire and casing for the magnet?
Iron or metal core strengthens the induction in coil
only this ist working free energy
why drill it all the wholes to cut itband then use a cutting bit ? ...
What size of same materials I must use to create 5kw / 220v ac generator?
Stronger magnets, more coils with thicker wire, high rpm rotor
he put 2020 in the title like god is gonna fix this in the next update
Just wandering if that did work could you use the power to run the drill that turns it?
yes, that would work quite well.
No,the system would collapse due to second law of thermodynamics.
Please I like your video but show us your work without music. No need music if your work is good.
Good morning Sir, I wanted to ask where you got the tube in the middle for the magnet
Its a central rotor of perma magnet DC motor
220V and you touch the metal of the lightbulp on hot wires with your bare hands ? either it's a 12Volts lightbulp or this is just another scam
Can you please make another one out of aluminum to hold in the magnetic field and with more coils in parallel?
how many turn?
What's the point if you need electricity to generate electricity?
I'm wondering how efficient this generator is, 70%?
2:04 instructions unclear, glued finger to it... 🤣🤣
So, is that an AC type?
No explanations on materials being used and proper applications of certain materials being applied
is that enamel copper?
Da you own some copper mine man
How are you able to get this much copper man 👏👏
Go to Wal-Mart in the craft section and you can buy 30ft copper wire for about $3. It's thin but still works. Get it before it's gone. I bought 50. Time to make our own power.
I make stylus pens and perpetual energy devices to charge my phone and to power my tv and ps3.
@@officialSuicideKlown I am an Indian bro
@@PainStreakGamingYtAJtojbbros Hardware shop buddy
@@LeRiderOP I am not getting that also
By the way are you a malayali 😛
@@LeRiderOP I am a malayali and I make video on electronics
35Watts is hardly a powerful generator. But otherwise good video!
This was great, thanks, I've been looking for "how to make own electricity at home" for a while now, and I think this has helped. You ever tried - Diyadison Penhloe Blaster - (just google it ) ? It is an awesome one off product for generating your own electricity without the hard work. Ive heard some interesting things about it and my buddy got amazing success with it.
just make it bigger with more coiled copper and magnets and hook it up to a wind turbine or some water current with some gears and you have a electric generator that can light a house
I bet you're using way more electricity running that motor than you're getting back out through the generator.
if he ever figures out a way to make it put out more than it takes to run the drive motor he will be a trillonaire
1) Do the number of windings matter?
2) Are they left-turned, right-turned, or one of each?
3) If the latter, am I correct in assuming that the direction of magnetic force would be towards the mags? Or, would that create too much drag?
No
What's that blu plate u filed down and placed bolts on?
If you're looking to make a powerful generator, you'll want to consider a 220V model. With this much power at your disposal, you'll be able to handle just about any job that comes your way. Whether you're powering a small appliance or a large piece of machinery, a 220V generator will get the job done quickly and efficiently.
What amperage do you think this 220v generator is getting? Wouldn't a heavy machine need a higher amperage to operate?
Who else knew it would work because you watched Dr stone ?
How many times is the copper wire wrapped around to make the coil?
Je crois que sa doit être le plus possible
Sorry, but I didn't understand what is the "table" at 2:37
/?Whats the point in making a generator if you have to use something powered to run it?
The Title is Wrong. and I think you should check the meaning of generator in the Dictionary
Sta bien ero para hacerlo en escala mayor com mas amperaje me pedria guiar que comductor y cuantas vueltas de alambre se dan. y si en vez de 2 van 4 bobinas? Gracias
QUE SENTIDO TIENE TANTO TRABAJO PARA HACER UN MOTOR QUE ALIMENTA UNA LAMPARITA DE 35 w CUANDO PARA HACERLO ANDAR, SE LOGRA CON UN MOTOR QUE CONSUME POR LO MENOS 200 w ?????????????
So 0.16 amps AC or if converted to 12 volts DC then 2.93 amps capable if the bulb is burning at 35 watts. Approximately but close enough of course. Well done nice generator.
Now, apply power in from the light bulb side...220 volts AC at 0.16 amps and give it a quick spin and you would have an brushless AC motor, being careful of course.
11:30
Were the screws inside the coils supposed to be electro magnets?
Yes
@@shivanshjha938 if those weren't there, would this still work?
@@jesseklein611 nope
You didn't tell how many turns for making coil
That would be a pain to count. Usually the entire width of the spool until it about a half a centimeter thick. Hope that helps.
I think around 1500 turns of 0.25 mm.
how much turns did you winded?
Excellent
very good, bro
how many watts is this diy gen
Just a quick question
Does the power generation depend on the magnetic fields or the number of turns of wires
now don't judge me because I am not the best at electronics:
the magnetic field can be increased depending on the number of turns
in most electromagnets, the number of turn increases the strength of the magnet
Stronger the magnetic field and more turns of wire more power generated
Thanks for the reply
Thanks for the reply
How do you cáll this generator? The súper glue generator?
props to you i noticed that too XD
how many turns and the size of the wire?
Is the copper wire bare or coated?
Most of wire is coated just ending are bare
I dont have some knowledge for this but i think the current is going back and forth so you need a volatge rectifier to make the volatge more higher.
Pegou normal da lâmpada e não levou choque. 220v??😂😂😂😂😂😂😂
Please change your audio track in your videos it gives a headache .
Yeah
Can it cook? 🙄
valid scheme but try adding a battery, a magnetic switch and do the Keppe scheme. Thank you
Just wonderful, I been tryin to find out about "free electricity generator for home" for a while now, and I think this has helped. Ever heard of - Diyadison Penhloe Blaster - (should be on google have a look ) ? It is a smashing one of a kind guide for generating your own electricity without the headache. Ive heard some great things about it and my colleague got amazing results with it.
@@marbelz.p6018 زذذر
Why not route the power to the drill instead of the light bulb and lock the trigger in place for constant motion?
Secondly add a belt to the rotor to create a constant motion to creat the effect shown here ruclips.net/video/GbehKJO8Q_U/видео.html
@@marbelz.p6018 can't find it?
it looks like an electric guitar pickup
This is just superb, I have been researching "water kettle made in germany" for a while now, and I think this has helped. Have you ever come across - Senarper Salient Secret - (should be on google have a look ) ? It is a good one of a kind product for discovering how to have free power in your home without the hard work. Ive heard some great things about it and my neighbour got great success with it.
Cheers for this, I have been researching "how to build an electric generator at home" for a while now, and I think this has helped. Have you ever come across - Diyadison Penhloe Blaster - (should be on google have a look ) ? It is an awesome one off guide for generating your own electricity without the headache. Ive heard some incredible things about it and my work buddy got excellent results with it.
Good work
Where is the free energy?
It would output more current with insulated copper wire, the insulation doesn't have to be thick. When coiling copper wire, try to make sure there isn't direct contact
He's using enamel coated wire, just as all motor windings use ~ NOT bare wire...
WHAT IS THE SENSE OF MUCH WORK TO MAKE A MOTOR THAT FEEDS A LIGHT OF 35 W WHEN TO MAKE IT WALK, IT IS ACHIEVED WITH A MOTOR THAT CONSUMES AT LEAST 200 W ?????????????
Maybe hook it up to a bike ....?
That's just the nature of energy production. There is always more input than output. Think about how much energy goes into the cranking of a car alternator just to charge a 12v battery.
Is it just me or does this bro got his solder way too hot?
Why are you not just using a diametric magnet...
How Many Cooling ?🙏
Hi dude
What is the frequency of output voltage? I want to make 400 Hz generator, please make one.
it's 1000 imaginary hertz
Depends on speed per minute
Rotation per minute
Speed in rotation per minute =(120*f)/number of pole
Pole=no. Of magnet
f=400
Speed =(120*400)/(number of magnet)
[If speed = 200 rpm
Number of magnet =240]
[If speed =1000 rpm
Magner(pole) required =120/2.5
....
Super👍🏼
Tesla salutes you!
Now i can make electricity out in the woods
Do i need iron core? PLEASE HELP