Cable shielding fully seated, adjusters fully in full overdrive End of cable housing: Small bit, 120 mm (12 cm) Turn full underdrive Large bit: 114mm (11.4 cm)
Followed these instructions and had no issues. I used cables from the bike shop, so the long or short cable identifiers didn't apply, but I had marked the overdrive cable with masking tape when I disassembled the cabling. I needed to replace the cables due to fraying inside the housing...pretty messed up in there. Couldn't turn the shifter more than 50% of normal...hope this isn't a reoccurring issue.
For the overdrive cable: Is the cable length 111mm or 114mm? Is it always 120mm for the underdrive cable? Does cable length differ depending on models (hub, shifter)?
Hi, the lenght for the overdrive cable is 114mm and 120mm for the underdrive cable. These lengths are the same for all our models regardless the mounted shifter or hub.
Are the dimensions in this video consistent for the older Nuvinci Units, specifically the N380?
hi, did u find out? I have an older nuvinci as well.
@tkoppis yes these numbers worked for me to set up my new Nuvinci N380 I got off of Amazon.
Hi i can't get an allen (hex) Key to fit the cable clamps. I've tried 3 different 2mm keys. Do i need a special tool?
Hi, the clamps can be tightened with a regular 2mm hex key. If the issue persists, please contact us via support@enviolo.com.
Cable shielding fully seated, adjusters fully in
full overdrive
End of cable housing:
Small bit, 120 mm (12 cm)
Turn full underdrive
Large bit: 114mm (11.4 cm)
Was it interns who designed this and interns who tested this?
Followed these instructions and had no issues. I used cables from the bike shop, so the long or short cable identifiers didn't apply, but I had marked the overdrive cable with masking tape when I disassembled the cabling. I needed to replace the cables due to fraying inside the housing...pretty messed up in there. Couldn't turn the shifter more than 50% of normal...hope this isn't a reoccurring issue.
Good to hear this video helped changing the cables, if you encounter any issues you can always contact us via support@enviolo.com.
For the overdrive cable: Is the cable length 111mm or 114mm?
Is it always 120mm for the underdrive cable?
Does cable length differ depending on models (hub, shifter)?
Hi, the lenght for the overdrive cable is 114mm and 120mm for the underdrive cable. These lengths are the same for all our models regardless the mounted shifter or hub.