Wow amazing...dude you answered my questions in one review without me asking...i like that the display show battery voltage..and that the rear wheel motor cable has a quick release,makes changing tires and tubes much easier..btw good review 👍🏽
i like the bike i got one a few weeks ago i just dont like how u have to get going 3mph for the bike to start going and i just got the bike and my breaks are already going out. takes a long time to stop and have almost got hit by many cars cause i could not stop in time. besides those flaws i love the bike and i do think its worth the money 🔥🔥
You should be able to change the start at 3mph to 0 by changing p05 to 0. As for the brakes do you have hydraulic of mechanical? If mechanical upgrade to hydraulic
@ yeah i have mechanical i regret Not buying the Hydraulic ones. Will for sure have to upgrade From these crappy ones . Thanks tho i will See if that works
HI, Can the speed be changed in the assistance levels? For example, at level 2 does it go a little faster than what comes by default? thanks for the help.
Yes you can put a 3000w motor, but you would also need a new higher voltage battery, controller and wires. By the time you do all of than it would be cheaper and easier to buy a Goat Powered v3 ebike that ready to go
im so confused. im in mph and it shows im going 34+ mph and it does feel like its going faster and im on 1 and a half bars Left when i lift the wheel off the ground it shows it goes 40 top is this a malfunction?
Which screen do you have on the v20 as depending on when you buy they shipped with different screens. The latest screen looks like this ruclips.net/video/pQ1SFyGA8Wk/видео.html
The m5 works with many but the issues is the controllers not standardized so you are better off buying a controller and display screen as a pair to ensure everything works properly
so my fatbike v20 only goes 25km and to boost it to 45/48km i need 03 to get to the code screen so i can boost it do u know how i can unlock 03 since its locked for me
If activated you hold throttle at constant speed for 2-3 seconds and the speed will stay constant and you can let go of throttle. Pull of brake lever shuts it off
Hi, I have the V20 Pro (received today). Initially, the PAS went to 5, but now it only goes to PAS3 because I changed something in advanced setting 04 (it is now 025). What is the correct setting for advance setting 04? Can anyone assist?
My friend bought a phatbike and we installed the wheels ourselves but with the tires that still needed to be pumped up and the outer tires keep coming out so what can we do about it? Its a very expensive Bike. Its a KENDA FROM 1200€ HOPEFULLY YOU HAVE A IDEA GREETINGS FROM MISSION GRAFFITI MENES RUclips CHANNEL
Tamobyke stated: please press power button to "00""01" page, press "+" button to "01" it mean unlock the max speed or 1-5 mode. then exit the setting. Let me know if that works?
I got a puncher on my back tyer fixed it and turned it on and on the screen it has e 040 error how do I fix it please does anyone know I have a movcan electric bike model v20 pro
I confirmed with manufacturer Display model CD-H6C-V20-0 you can change p03-p04 with password Display CD-H6C-V20-M is locked. I have a spare v20-0 display i can sell if needed
Wow amazing...dude you answered my questions in one review without me asking...i like that the display show battery voltage..and that the rear wheel motor cable has a quick release,makes changing tires and tubes much easier..btw good review 👍🏽
Thanks for the feedback and enjoy the bike
i like the bike i got one a few weeks ago i just dont like how u have to get going 3mph for the bike to start going and i just got the bike and my breaks are already going out. takes a long time to stop and have almost got hit by many cars cause i could not stop in time. besides those flaws i love the bike and i do think its worth the money 🔥🔥
You should be able to change the start at 3mph to 0 by changing p05 to 0. As for the brakes do you have hydraulic of mechanical? If mechanical upgrade to hydraulic
@ yeah i have mechanical i regret Not buying the
Hydraulic ones. Will for sure have to upgrade From these crappy ones . Thanks tho i will See if that works
HI, Can the speed be changed in the assistance levels? For example, at level 2 does it go a little faster than what comes by default? thanks for the help.
No - I wish there was
this video helped a lot, tyvm
Glad it was helpful
Is there a way to get a higher power motor seperate like a 3000w motor
Yes you can put a 3000w motor, but you would also need a new higher voltage battery, controller and wires. By the time you do all of than it would be cheaper and easier to buy a Goat Powered v3 ebike that ready to go
Then what’s the point of the 7 speed gears on the right bar
Pedal when you have to
im so confused. im in mph and it shows im going 34+ mph and it does feel like its going faster and im on 1 and a half bars Left when i lift the wheel off the ground it shows it goes 40 top is this a malfunction?
Make sure p02 setting if available is set to 23 which is wheel diameter size on the outside. If that doesn’t work change p10 from 100 to 80
I have tamo v20 stuck in 3rd gear at15mph I tried it would go up to 45 one time and I didn’t save it right and now it won’t go above 40 km/h
Which screen do you have on the v20 as depending on when you buy they shipped with different screens. The latest screen looks like this
ruclips.net/video/pQ1SFyGA8Wk/видео.html
Do you know where I can change my voltage from 48v to 52v?
I’m planning on upgrading to a 52v battery
Voltage is in locked setting p03 - p05 you should be able to unlock those settings using passcode 1111 i i think under p09
The outer light doesnt turn on. Only the center light when i flip the switch. Advice?
The outer light or halo light is always on when the bike is on as a day time running light
@ No I mean the halo light doesn’t turn on at all. I turn on my bike and and the halo light wont turn on with the bike.
Hey! Is this accurate? Will it display the actual speed and is it not laggy?
Yes it’s accurate to 1-2 mph
Which e-bike motors does this work with? Any universal e-bike display you can recommend?
The m5 works with many but the issues is the controllers not standardized so you are better off buying a controller and display screen as a pair to ensure everything works properly
How do I get 5 pedal assist modes I only got 3
Change p03 to 01 for 5 pedal assist modes. You might have to unlock p03-p05 with passcode 1111
@@BRichSolutionhow to unlock it
@@BRichSolutionI don’t have p03 and It skips to p04
@@BRichSolutionwhen I change the p06 to 2 it give me an error
I still can’t unlock 5 pedal assist it just does nothing and where do I put the passcode
is 5 the most mode it can go ? or can i make it more ?
I think only 3 or 5
Is there a way to be able to unlock all the options and adjust them ? Because in my screen almost all are locked
try passcode 1111 if that does not work email Tamobyke at qingmaifactory@163.com
Same
how to you type in the passcode?
@BRichSolution
so my fatbike v20 only goes 25km and to boost it to 45/48km i need 03 to get to the code screen so i can boost it do u know how i can unlock 03 since its locked for me
Try 1111 passcode if that doesn’t work ask Tamobyke
In Nederland al New types are locked
How do I turn off cruise control, it won’t let me put it at 0
Try changing to 2?
How does the cruise control works?
If activated you hold throttle at constant speed for 2-3 seconds and the speed will stay constant and you can let go of throttle. Pull of brake lever shuts it off
thank you for vedeo
Glad it was helpful
How do I unlock 5 pedal assist my advance settings starts at p1 then skips to p5
You cannot unlock p05 if your screen model on the back of display ends with V20-M
Hi, I have the V20 Pro (received today). Initially, the PAS went to 5, but now it only goes to PAS3 because I changed something in advanced setting 04 (it is now 025). What is the correct setting for advance setting 04? Can anyone assist?
change p04 setting to 05
Nice
Thanks
Will this work well with ridstar q20?
Not sure
Can it get past 30 mph? Because I heard it can go 40-45mph
No 30mph is max. 48v bikes only go 32-33mph. To go 40-45 you would need a 60v bike
If you got a 60 v battery you’d have to upgrade the motor
Do you know why my tamobyke is getting very little miles in it?
make sure tire pressure is 19-21 psi as it makes big difference in range, Also colder temperature will diminish range
how do you make it go 30 mine only goes 28
You need a new controller and screen from Tamobyke
Can you do a video of how you can put it on 45 mph
On v20
set p10 to 100 and it should go 45kph
@@BRichSolutionit doesnt work
My friend bought a phatbike and we installed the wheels ourselves but with the tires that still needed to be pumped up and the outer tires keep coming out so what can we do about it? Its a very expensive Bike.
Its a KENDA FROM 1200€ HOPEFULLY YOU HAVE A IDEA GREETINGS FROM MISSION GRAFFITI MENES RUclips CHANNEL
Yes pump up the tires and make sure the bead on the tire seats on the rim as the tire inflates
When I put in password 1111 it still doesn’t show p02 and p03 so I can’t get mornepedal assist mode I want 5 but I only got 3 can you help me
Tamobyke stated: please press power button to "00""01" page, press "+" button to "01" it mean unlock the max speed or 1-5 mode. then exit the setting. Let me know if that works?
Can yo7 just do a video in how to get 5 pedal assist please
Apparently its lock unless you have screen model # ending in v20-0. V20-m cannot be changed
@ so I can not get 5 pedal assist modes so their is 0 way because I have m
Please can you make a video on how to unlock settings 234 (I subscribed)
go to p10 and enter passcode 1111 that should unlock p03 p04 and p05 settings
@@BRichSolution hi I subbed, when I enter 1111 it doesent unlock 2 3 4 is there anything that could solve that issue?
How do I change it from 45 to 25
go to p10 and enter passcode 1111 to unlock the full advanced setting menu then go to p04 and set 25
Yo do u know why yours goes 30 but mine goes 28?
Yes, i requested an upgraded controller for my bike from Tamobyke. Not sure its worth the hassle for 2 mph
@ true that 😂
@ well thanks for telling me
I got a puncher on my back tyer fixed it and turned it on and on the screen it has e 040 error how do I fix it please does anyone know I have a movcan electric bike model v20 pro
Error code 40 is motor issue. Try disconnecting the motor cable and reconnecting. The connector is in the back between the motor and pedals
I have tried everything and nothing has changed @@BRichSolution
@@BRichSolutionI tried this and it didn’t work at all. I have the same E040 error code.
How to unlock 03 and 04 setting and where do you type in the password
I confirmed with manufacturer
Display model CD-H6C-V20-0 you can change p03-p04 with password
Display CD-H6C-V20-M is locked. I have a spare v20-0 display i can sell if needed