I could see that breather going in before the MAF causing it to get oiled up. Good idea to move it behind it. I ported a few throttle bodies this way. Never noticed anything. I knife edged the throttle plate and ground down the shaft between the screws and I did feel a difference there. So did other people I did it for. Glad to hear you guys are doing well. I really like your videos Jeremy. Thank you
The Javelin is awesome, it looks bettter than a new one at the time. Thanks for the ride. Brent and Jamie, the Dynamic Duo, are at the top of their game.They will make pocket rockets racing grow on the East coast. Take care all.
Love this channel. In between parts changers and Funny Car mechanics. This is stuff us backyard mechs can do on a weekend to mod their rides. Most of us don't have 1500 HP racers..haha
Glad to see another video from y'all! I'll disagree with the meme at the end though... I get the sentiment but there's been plenty of cases where people who were doing the wrong thing were forced into compliance with the law/moral obligations.
Really missed your content. I was wondering why I haven't seen your stuff in a while. Good to have you back nonetheless! Always a big fan! Thanks Jeremy.
Welcome back, sir 🙂 Loved the AMX and your myriad little improvements that made an already great build awesome. It’s always in the detail and I admire your approach. Keep the faith 🤟🏼
Great video with lots of useful information. Never actually thought if porting the TB like that. I've always bored them out in a lathe and put in a new bigger plate.
68-69 AMX's are beyond cool. My Uncle Steve bought a 69 new. I remember being a little kid rolling around in the back bouncing our heads off the glass when he would bang gears.
I’m pretty new to the channel. I like what you do and your personality. Thanks for sharing this with us. I love Motorsports but never could afford to be involved so getting to see people make a living doing what they love is cool and being able to learn from it is fun.
I gave you a thumbs up just for the AMX, always loved those cars. Another car to add to the list of (they are everywhere, now they are gone cars) Great to see you back!!:)
That AMX is gorgeous inside & out!!! So what was the final HP & TQ numbers for the AMX Jeremy? ( My heart has always been partial to the normally aspirated stuff. )
Only a couple minutes into the video on the intake for the crate motor LS3 why would you not just flip the actual tubing with the mass airflow so it would be reading it before? Not sure how it’s made. Just an idea for my outsiders perspective
I liked your channel. I wish you would return to doing it. I am sure you have things going on in your life. With that said do it for the fans and customers because this is the American dream and you Seem to have given up. Show us what your made of Fasterproms.
Great video watched it twice cause i forgot :) , Get the meme at the end but if you consider the pandemic forcing people into compliance can be a good thing considering the amount of people who breech the basic of rules and infect others etc and also gives rise to not following goverments etc cause they make laws that force you to complie not always for bad reasons
Good to have your video's back Jeremy. Doesn't matter that you've been gone for a while we'll remain.
I'm looking forward to seeing some videos with Brent. The smart cars going to end up with a moontune 😂.
Man been wondering about y’all. Glad to see some new videos coming out!!
Laz seems to be getting more comfortable talking to the camera. Glad to see Fasterproms posting videos again.
Hey Jeremy, the whole video I was thinking this is your best content for a while. Keep doing what you love, it shows.
Really enjoyed this one! That AMX is sweet!
How the hell did I not know taking off that cover on my LS3 would help? Learn something new every day.
I could see that breather going in before the MAF causing it to get oiled up. Good idea to move it behind it. I ported a few throttle bodies this way. Never noticed anything. I knife edged the throttle plate and ground down the shaft between the screws and I did feel a difference there. So did other people I did it for. Glad to hear you guys are doing well. I really like your videos Jeremy. Thank you
The Javelin is awesome, it looks bettter than a new one at the time. Thanks for the ride.
Brent and Jamie, the Dynamic Duo, are at the top of their game.They will make pocket rockets racing grow on the East coast.
Take care all.
Love this channel. In between parts changers and Funny Car mechanics. This is stuff us backyard mechs can do on a weekend to mod their rides. Most of us don't have 1500 HP racers..haha
Glad to see another video from y'all! I'll disagree with the meme at the end though... I get the sentiment but there's been plenty of cases where people who were doing the wrong thing were forced into compliance with the law/moral obligations.
Really missed your content. I was wondering why I haven't seen your stuff in a while. Good to have you back nonetheless! Always a big fan! Thanks Jeremy.
Amx is nice...sounds rowdy on side pipe 👌💯👍..owner has built a cool car 👍.
More of Laz’s JEEP build 😉😉😉
I kept looking to see if you had a video out… Glad things are going good for you… RUclips is not the end-all
Good to see a new video man. Great content brother keep on keepin on!
Welcome back, sir 🙂 Loved the AMX and your myriad little improvements that made an already great build awesome. It’s always in the detail and I admire your approach. Keep the faith 🤟🏼
Great video with lots of useful information. Never actually thought if porting the TB like that. I've always bored them out in a lathe and put in a new bigger plate.
68-69 AMX's are beyond cool. My Uncle Steve bought a 69 new. I remember being a little kid rolling around in the back bouncing our heads off the glass when he would bang gears.
Keep moving forward❣️
So happy so see a new vid
Much Love Bro❣️
Great to see an AMX and detailing insights into tuning
I’m pretty new to the channel. I like what you do and your personality. Thanks for sharing this with us. I love Motorsports but never could afford to be involved so getting to see people make a living doing what they love is cool and being able to learn from it is fun.
Great video! I enjoy the explanations behind the way you guys tune and make power.
I gave you a thumbs up just for the AMX, always loved those cars. Another car to add to the list of (they are everywhere, now they are gone cars) Great to see you back!!:)
Been thinking bout y'all glad y'all are back on the tube
Keep doing what ya love
Glad to see you back. I'm not the one who brings up the past but I miss seeing George on here. How are the doggies doing?
jump over to cleets channel then, george is killing it over there.
Nice to see you back online.
I got worried I got unsubed!
Hella glad to see you back and having fun!!
Smiles per gallon!
Why unsubscribe? I have followed him from the cletus times and it’s always good content
@@seanrulifson5919
He had some probs loosing subs.
That’s all.
And me too! I’ve been watching since the start also!
My dad bought a 1970 amx new. I hope to one day own one. That white one would have looked nice with a voodoo in it.
That AMX is probably one of my favorite cars I've seen so clean 👌
Thanks for keeping up the awesome content.
Can we get a "Side Pipes And Big Cams" t-shirt?? Haha
Great to see another vid from Fasterproms. Keep em comin boys!
Love the AMX Jeremy. Great to see your videos again.
Great to see you back, hope your doing great, hello from Melbourne Australia 👍🏼👍🏼👍🏼👍🏼🇦🇺🇦🇺🇦🇺🇦🇺🦘🦘🦘🦘
I was at Fl2k and didn’t see you. I thought for sure I would. Sorry I missed you
Happy to have your videos back up man. Missed the videos man. Keep up the good work
Still the most informative LS channel on the internet! I gotta try some custom porting
Good to have a new fasterproms joint in my feed.
So glad to have fasterproms back
Ima big AMC fan... and to see an LS in that AMX breaks my heart... Cant even put a mopar in it
That is the nicest AMX I have ever seen. Nice video.
I love Skillet’s new single Surviving The Game.
That AMX is gorgeous inside & out!!! So what was the final HP & TQ numbers for the AMX Jeremy? ( My heart has always been partial to the normally aspirated stuff. )
Fuel the Al Gor ithm and support the RPM Act.
Damn I didn’t realize how much I missed faster proms
Great to see you guys back
As always bro I love your content many blessings to you and your family
Cool car! I keep telling Laz the old orange vette needs side pipes!
You need to bring the s10 or the kart back (preferably the s10) it will revive the channel!
Love the video, great cars, great info. Thank you. Godspeed 🤙
AMX baby.... That's a sick car!
So if you port your stock throttle body . Does it have to be retuned 🤔
Depends on how aggressive you go. But 99% of the time no
@@Fasterproms1 awesome thanks 🤝🏽
I enjoyed the video. Felt like how they used to be.
That car definitely deserves a cam, headers & ported intake manifold, Really nice build though!
Glad your back!
Lets go brandon !!!
And they are back
I love those big ol sedans making some power!
finally got a notify and got here as quick as i could
Only a couple minutes into the video on the intake for the crate motor LS3 why would you not just flip the actual tubing with the mass airflow so it would be reading it before? Not sure how it’s made. Just an idea for my outsiders perspective
Unfortunately the MAF only fist one way!
Good to see you boys back!
So called cold air intakes that use under hood air is not a cold air intake. They may be a high flow intake.
Awesome cars! Thanks for sharing!
Good to see some more content .legends
Nice AMX!
Great content thanks for sharing, glad to see a video
Anyway that the air filter on the AMX can be moved out of the heat in the engine bay?
Great vid Jeremy!!
Need to sell some parts that just have your name on them! That would be cool
I'm looking for a torque converter and A flex plate for a 2012 Chevrolet Suburban. I bought a reman one and it's bad
I liked your channel. I wish you would return to doing it. I am sure you have things going on in your life. With that said do it for the fans and customers because this is the American dream and you Seem to have given up. Show us what your made of Fasterproms.
When does PFI start working out of the shop ?
That AMX IS SPOTLESS
Hello, I love your videos. Question; Wouldn't a shorter shank on that bit give you more control on the tip?
The long shaft let’s you pull with your hand to get more leverage!
You don’t pull on the tool.
Wonder if anybody makes those thermal plates for a sbc
I wondered where you have been :)
Love watching your content. Why aren’t you driving in 2.4 hours of le mullets this year?
Lol.
I don’t think Garret and Jeremy are on the best of terms for some reason 😂
@@sjv6598 Yea, I was hoping that wasn’t the case. George really mucked that up. So pissed a Cleetus for hiring him.
@@veto8792 blame Jeremy not George.
Nice old AMX
i still want to you and Brent do online tutorials.
"I always wanted a hatchet to throw, and what better place than here?"
Ironically, ten customers picked up their cars 5 minutes later.
Miss George? None of my business. However did you know that you can just mix seasoning and make your own custom rubs and such?
No cutting away if the throttle shaft ??? Thinning of the shaft creates a lot mor flow accross the shaft
but it does nothing. not even a nominal gain in airflow
Welcome back
Legend updates
great video , i like you guys
I Want to see legend at Tom Bailey's drag race
Hideous wheel on that AMC but the rest is perfect!
My hart is out on the table for the amx
Sigourney Weaver lights lol
Whats up with the videos like every two weeks now everything good
I hope you're excited as a lot of us our to have pfi working out of your shop. Hopefully Brent doesn't steal Laz from you haha just joking bud.
Great video watched it twice cause i forgot :) , Get the meme at the end but if you consider the pandemic forcing people into compliance can be a good thing considering the amount of people who breech the basic of rules and infect others etc and also gives rise to not following goverments etc cause they make laws that force you to complie not always for bad reasons
1st to like 👍, Are you going to World Sport Compact Challenge this year..
Lol the meme was great
?!?AMX......!!!
Where is S10?!? Send location!
Javlin
Science Fatha Timing 😇
👍👍from this guy