I must say I've enjoyed your video brother. Very natural. I'm looking to build one of these for my Yamaha but also over consider ordering from the same guy.
I’m in the process of making one of these right now. I have all the parts coming from Amazon. I’ll keep everyone posted on how it goes. As of right now, I’m about $150 into it.
@@littlestews no, at the time I didn’t know it was better to install with one. I wired it to the battery but have added a relay since that install was done.
It does I just want something that has a little better range and that I don’t have to worry about having charged. It’s time for you to come over to the Darkside :-)
@@KRXBrandon Brandon, I have a MotoArmor flat roof, it's not convex/concave. It sits pretty much flush with the top of the roll bar. You think with the aluminum angle, front and rear that there will be enough space to draw air in? The KRX roofs have plenty of space to pull air in.
@@Bizill75 I would contact Tyndall fab and let him modify one for you - possibly not put the rail on the back side. I will look at mine tomorrow and get an idea of how close it would be if it was not concave and let you know.
@@MisterReltec I really can’t remember Tyndall custom I would just message him on face book they are high and you can go as crazy as you want with them but for my machine it made riding in June and July much more enjoyable wish I could remember what I paid for it but honestly I can’t and don’t wanna scare you away if I say a crazy amount what ever I paid it was worth it
Link is in the description, I don’t recall it off the top of my head. I definitely recommend these. If you live where it’s hot, they make such a big difference!
I just took my side by side in for some warranty work. I can let you know in a few weeks when I get it back. I can tell you that if you have the stock cage, it may have a quarter inch on each side from the bars when it is mounted.
I got mine from Tyndall - www.tyndallsfabshop.com/custom-fan-accessory-units. They have a good Facebook page with lots of information. Mine was $400 but it has been a while, not sure if they have gone up or down since then and it varies depending on the options you pick. Still using them and still very recommend!
Got mine yesterday for my Talon installing next weekend just in time for the warm weather in West Virginia. Great job on yours.
You will love it! Still one of my favorite addons so far!
I must say I've enjoyed your video brother. Very natural. I'm looking to build one of these for my Yamaha but also over consider ordering from the same guy.
Still using mine, one of the best addons I have done!
I’m in the process of making one of these right now. I have all the parts coming from Amazon. I’ll keep everyone posted on how it goes. As of right now, I’m about $150 into it.
Definitely do that. I know of a few that have made some very nice ones!
Got mine last year !!! They are Great
We used a pr of furnace filter panels set on top of ours, amazing how much dust is kept from blowing down on our heads
Very good idea!
DId you just zip tie them down?
Good job hope it keeps you cool and helps with the dust.
I think it will be a great add on. Doing a big ride in a few weeks that will let me know for sure! Thanks for watching!
That probably will keep you felling good when you are riding in that cool KRX
Heck yeah, I am very glad to have it!
Mounts are upside down. The flat tab of the mount should be on the top side. Putting the fans closer to the roof
How tall are you? I am 6’5 and would love to have one but would prefer not to split my wig
It would be super tight. I have a big bud who is 6.5 350ish and he was very close. You could probably get away with one big fan in the middle.
Do these come with a relay switch?
@@littlestews no, at the time I didn’t know it was better to install with one. I wired it to the battery but have added a relay since that install was done.
How thick is the aluminum plate, does it sag when riding
I do not have exact measurements, but I can check. It does not sag at all, doesn’t budge or flex.
What system did you add to be able to fold the seats forward? Bet those are nice when it’s hot !
The fans I ment
For the seats - ruclips.net/video/y4zzBaJNYGY/видео.htmlsi=7XxuPlV7cgvoOS7e. I freaking love the fans! They are the best add on I did have for SxS!
Nice. Gonna make me spend more money. Especially when Alicia sees that. I guess the hand held radio didn’t work out for you?
It does I just want something that has a little better range and that I don’t have to worry about having charged. It’s time for you to come over to the Darkside :-)
Looks good but how much airflow you get with a roof on
So far it has been great. They are quite powerful and push a good bit of air. I’ll know more after my ride this weekend and will post an update.
@@KRXBrandon Brandon, I have a MotoArmor flat roof, it's not convex/concave. It sits pretty much flush with the top of the roll bar. You think with the aluminum angle, front and rear that there will be enough space to draw air in? The KRX roofs have plenty of space to pull air in.
@@Bizill75 I would contact Tyndall fab and let him modify one for you - possibly not put the rail on the back side. I will look at mine tomorrow and get an idea of how close it would be if it was not concave and let you know.
Best money I spent was getting one these few weeks ago for mine
How much was yours? I know they may range in price depending on the machine, but I am just looking for an approximate cost.
@@MisterReltec I really can’t remember Tyndall custom I would just message him on face book they are high and you can go as crazy as you want with them but for my machine it made riding in June and July much more enjoyable wish I could remember what I paid for it but honestly I can’t and don’t wanna scare you away if I say a crazy amount what ever I paid it was worth it
Nice
How do I order this
I put their Facebook page in the info section. Hit them up! It is so worth it.
facebook.com/TyndallsCustomFabShop
This is fu*king sick. I'm a big man and sweat like a mad man. Want this for my green KRX. How much and who do i contact?
Link is in the description, I don’t recall it off the top of my head. I definitely recommend these. If you live where it’s hot, they make such a big difference!
what are the external dimensions of the frame?
I just took my side by side in for some warranty work. I can let you know in a few weeks when I get it back. I can tell you that if you have the stock cage, it may have a quarter inch on each side from the bars when it is mounted.
Where did you get those intake covers from
I got them from gilleyfab.com. You find them on Facebook as well. Easy to deal with and good work.
@@KRXBrandon thanks
Where did you get that fan and how much please
I got mine from Tyndall - www.tyndallsfabshop.com/custom-fan-accessory-units. They have a good Facebook page with lots of information. Mine was $400 but it has been a while, not sure if they have gone up or down since then and it varies depending on the options you pick. Still using them and still very recommend!
I want one
You going buy one or make it yourself?
It blew most of your hair off 😂
Haha, yep! I don’t have much to loose!
R fans reversable
No, these are not. They may have an option for it but I was not looking for it at the time I got these.
So loud