Guys this video was made when i bought some tattoo machines from kinda builders :)))when i just started tattooing... so its just a video i thought i had nice machines))) now i am a professional artist and using different machines. WIsh u all best guys.
i know right....i was scratching my head as to why someone would (and you never should)angle that contact so far reaching like that especially when that other slot is available. different strokes (haha)for different folks but the frame geometry should not be disregarded.....anyways nice day to ya
Sorry finger slipped, the armature bar on the 2nd machine is upside down that relief cut should be under the spring or at lease that's what's it's made for anyway to give you more rear spring for that diving board effect
Mexicanamerican21 that is a cutback liner . Notice his smaller spring... I don't know what you're thinking but. The way he has these machines set up are great. You seem angry and confused.
ok so im guessing you followed typical writing rules that compared to your video title the first one you showed was the liner, the second the shader the third the color packer... :) ty so much for a video that is JUST the sound... i get so tired hearing them explain when really i just need to HEAR it .. its been a good 6 months since ive even pulled out my kit and im glad i came across this so i can tune the few new machines i just got :D
funny how people talk shit because his set ups are different than theirs. there is not a right and wrong. well there is wrong... but not one of his are wrong. I bet they all throw color. maybe a bit punchy for some of you or a bit soft for others... all depending what you run your machines at ( not guns ) and how you work. fast or slow. a good artist can use any machine and do a good tattoo. machines don't make the tattoo.
SoLo 1ManTeam that’s bullshit not true the ink that’s used in prison always fades out it ends up looking really light vs a dark detail color pack ink I would stick with the pros not the cons 😂
funny how people talk shit because his set ups are different than theirs. there is not a right and wrong. well there is wrong... but not one of his are wrong. I bet they all throw color. maybe a bit punchy for some of you or a bit soft for others... all depending what you run your machines at ( not guns ) and how you work. fast or slow. a good artist can use any machine and do a good tattoo. machines don't make the tattoo.
all i was gonna say is that they look like expensive machines ... you'd think he would have the square side of those rear spring washers facing forward ... but hey to each his own ...
![ROSÉ (로제) - number one girl [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/A9oByH9Ci24/mqdefault.jpg)
Guys this video was made when i bought some tattoo machines from kinda builders :)))when i just started tattooing...
so its just a video i thought i had nice machines))) now i am a professional artist and using different machines. WIsh u all best guys.
How to make it at home
I can tell you that the color packer is a badass machine
Nice job. I really like your machines.
1st machine sound all right. cool build.
I'd certainly like this I did a much better job explaining this than just dry running a few tattoo machines
Quantas voltas tem essa bobina e qual capacitor vc usa
Deve ser 10v. A bobina e bem grossa
Amigo la de línia no importa q el tornillo de contacto quede asi
would love a comentry while you are showing them, im new
Oh and the first machine, you should really move the contact binder in the rear slot
i know right....i was scratching my head as to why someone would (and you never should)angle that contact so far reaching like that especially when that other slot
is available. different strokes (haha)for different folks but the frame geometry should not be disregarded.....anyways nice day to ya
Tout machines are gold tune,just one question to film in black Can i use à shader or color Packer?
Sorry finger slipped, the armature bar on the 2nd machine is upside down that relief cut should be under the spring or at lease that's what's it's made for anyway to give you more rear spring for that diving board effect
looking at those machines they look like all rounders. liner or shader. but by the sound they don,t seem to be set right.
too soft springs in shader and color packer?
kapone33 soft color packer for blending
Mexicanamerican21 that is a cutback liner . Notice his smaller spring... I don't know what you're thinking but. The way he has these machines set up are great. You seem angry and confused.
Move that binding post back on that liner ffs
Firstjon Lastbrown for Fxxx sakes ? 😂
No importa la pocicion del tornillo en la liner saludo desde panama
is that last machine a philippine made coil?
nop
anarchaos dont know really
I also noticed our old 10Php Bill on the 3rd machine... REPUBLIKA NG PILIPINAS
1st gun was a liner then the second a shader and the 3rd gun a shader set up as a liner? am i right? some one please correct me if i am
3 machine is slow color packer
i want to get mobiron for liner .. what is a good shader to get
why is the first machine screw is backwards? is it a liner?
ok so im guessing you followed typical writing rules that compared to your video title the first one you showed was the liner, the second the shader the third the color packer... :) ty so much for a video that is JUST the sound... i get so tired hearing them explain when really i just need to HEAR it .. its been a good 6 months since ive even pulled out my kit and im glad i came across this so i can tune the few new machines i just got :D
+Epic Grimm kit! No two machines sound the same!
Super
What springs sizes are you using on those machines
aaron gandolfo usually 18 or 20
Are we suppose to guess which one is which?
Ok im game
1 color packer
2 shader
3 liner
Yes that's my final answer.
Did I win?
Personally I can't see how there set up wrong!!!! maybe DIFFERENT to how you would set them up but it must work for him/her!!!
They are the wrong geometry for what your using them for
funny how people talk shit because his set ups are different than theirs. there is not a right and wrong. well there is wrong... but not one of his are wrong. I bet they all throw color. maybe a bit punchy for some of you or a bit soft for others... all depending what you run your machines at ( not guns ) and how you work. fast or slow. a good artist can use any machine and do a good tattoo. machines don't make the tattoo.
talk or something mate !!!
tattootraining. had a run in with him about his ultrasonic cleaner.
nice machines
Check out my custom machine videos. I'll add more soon.
I want that machine
i want to swaf or tattoo machine
Tattoo masin bnane ka stap by stap sidhant
spring touches bar allot with last
you selling
agree. they are all set up wrong. tattoo artist of 32 years
The 2nd machines
Bad position the contact post in the liner and bad calibration in all machines.
Talk
I seen and have work in prison with homemade gun, single needle and ink do better work then tattoo shops..
SoLo 1ManTeam that’s bullshit not true the ink that’s used in prison always fades out it ends up looking really light vs a dark detail color pack ink I would stick with the pros not the cons 😂
funny how people talk shit because his set ups are different than theirs. there is not a right and wrong. well there is wrong... but not one of his are wrong. I bet they all throw color. maybe a bit punchy for some of you or a bit soft for others... all depending what you run your machines at ( not guns ) and how you work. fast or slow. a good artist can use any machine and do a good tattoo. machines don't make the tattoo.
thank u dude
all i was gonna say is that they look like expensive machines ... you'd think he would have the square side of those rear spring washers facing forward ... but hey to each his own ...
Good artist need good setup.im tattoing over 25 year than you.