Это видео недоступно.
Сожалеем об этом.
How to clean and service your FELCO 2 pruning shears
HTML-код
- Опубликовано: 20 янв 2024
- What you'll need:
- FELCO 905 multifunctional sharpener
- A dry rag
- Scotch-Brite
- FELCO 990 grease
- Adjustement key 2/30
- Lubricating oil (sewing machine oil)
- FELCO 980 protective spray
Instructions:
1- Disassemble your tool
2- Clean all parts with a dry rag
3- Scrub each part carefully with scotch brite
4- Add some FELCO 990 grease on the blade and counter blade
5- Reassemble your tool
6- Adjust your tool
7- Add some lubricating oil on the spring
8- Sharpen your tool:
The FELCO 905 will allow you to maintain the sharpening angle of the blade on both sides.
9-Spray FELCO 980 on to your tool
This was the best video ever! Feel very confident now. Music isn’t that bad and if you are like the other commenter, then mute it.
I have been trying to sharpen my Fiskars and nothing is small enough to get in the narrow part of the blade and I cannot find any instructions on how to disassemble it. You just sold me on Felco 2 pruners! Thank you so much!
Fiskars & Felcos are a mile apart. You're much better off with the #2 Felco. I've had the same pair on my hip for 5 years and it's never let me down. :)
Thanks for the visual. The "music" is terrible, though. 😂
Hi,
Please help me on how can I order your Falco Tools in India.
а зачем второе карбидное полотно в 905? и зачем пырскали дезодорантом?
ну и нахера смазка под лезвие с той стороный где нет соприкосновения? дороговаты тряпочки для протирки то
Use a shop towel, then...
Also, the oil helps keep rust off, not just lubricate.