BigIron Melroe M870 Buffalo Coal Dozer
HTML-код
- Опубликовано: 2 июл 2017
- Melroe M870 Buffalo Coal Dozer, 7331/7231 Hrs Showing, Power By 2 NTC 855 Cummins Diesel Motors: Front Motor Is Weak And Smokes, 335 HP Each, 2 Clark Torque Converters And Clark 4 Speed Powershift Transmissions, Each Drive Train Runs 1 Side Of Dozer, 1 Side Has Rockwell Hubs While Other Side Is Caterpillar Hubs, 23' Blade, Blade Has Plates Welded On It, 4 Shank Ripper, 65/35-33 42 Ply Tires, Full Swivel Seat, Weighs Approx 200000 Lbs. With Blade, Will Not Assist With Loading, SN: NONE
Авто/Мото
People are quick to make assumptions. I spent a fair amount of time running an 880 multiwheel with a 45 yd U blade at the sweetwater uranium mill by Rawlins Wyoming in 2000. The machine was rather cumbersome, it required special techniques to steer it, as opposed to a track type dozer. It was a skid steer, but due to its size and weight, similar to a D11 cat, it didnt skid as well as expected, hence the techniques to steer it. But it was no slouch pushing. It could push that 45 yd U blade with full loads in 2nd gear with relative ease. We always pushed in second because it tended to break axles once in awhile when pushing in 1st. Repair was simple as they were floating axles, provided you had replacements. It was not as good of an all around dozer as a crawler, but it worked pretty well in fill and dump sites, or coal poles where you leveled and packed materials. It wasn't the best dozer ever, but it could definitely push.
Never seen anything like that before. Awesome.. love old American heavy equipment
I a like how that little bugger goes forward and then later on it reverses very good and with stunning power.
Man this is an awesome powerful machine! Never seen one that looks like this
I help build seven pf those machine's back in 1978.First time seeing it run. Always wondered what happened to them.
That thing creates its own weather patterns
Hey guys thsi video does really give you the true sense of how big this machine really is, trust me its an extremely LARGE unit. It was a custom build engineered by a fellow named Sill Melroe out of Gwinner ND and I believe it was used primarily at he Kotuo coal power plant N of Bismarck and it was used with great success for many years, I know the engines have been rebuilt or replaced at least twice very possibly more times. I know when I first looked at and sat in the cab of this machine my thoughts were like some of yours, what a pile of crap, but after a bit more research at THE TIME this machine could move more coal than any other piece of equipment on site and it was that way for close to 9 years. When it was retired North American Coal Corporation donated the machine to Bonanza Ville in West Fargo ND and that is where it sits now!!
Melroe came out with Bobcat didn't they? I remember the name being on the early ones.
His first Bobcat was the M60. It had three wheels and no cab.
Good to know... I get back to Fargo every now and again to visit my family in SD...
Putz,aí sim e máquina,olha o ronco do motor, top 🇧🇷🇧🇷🇧🇷😎
I like this beast to add to my Tonka collection
There used to be a piece of equipment with 8 wheels like this on the South side of Nashville, TN. I saw it back in the 1980s. It had no blade or ripper and I never knew what it was for. I thought at the time it might have been used by the railroad since it was close to the CSX tracks.
That's one big bobcat ;) :)
Wow Big machine Quite a wheel horse Looks as if checking controls to verify everything functions
How many tires do you change when turning?
I think it roals more coal than it could push!
As is often the case with YT videos, the operator doesn't have a clue. I would love to see this in the hands of someone capable of giving it a real workout!
Also, the machine is bi-directional and you can mount the implements at either end. The 880 in Rawlins had the 45 yd U blade at one end, and a cushion blade at the other. Later they brought out a 28 ft wide, 6 way blade. I tried to talk them into swapping it with the cushion blade, which we weren't using, so we could doze in both directions. We were doing reclamation, hauling dirt into the fill with huge belly dumps hauling 120 yes at a time. The dozer was just leveling and packing the loads. I thought it would work well, dozing in both directions in that scenario, instead of backing up for each push, besides giving the dozer the versatility of a functional u blade at one end and a 6 way angle at the other, but the bosses couldn't grasp that concept. There is a video on u-tube showing an 880 pushing, just put in 880 multi wheel.
Looks like a mad max vehicle
First time seeing one of these what in the hell, what a unit.
What was this machine built for?
Would make one hell of a snow pusher though
I have see pictures of these but have not seen a video of one operating. I like the design in that the operator would have good visibility of the work area.
Cabin look like air trafic control tower😉
That thing is cool but that was painful to watch.
Looks like a reasonable design, why not? I guess it pushes coal relatively long distances, no need for sharp turns.
I know that its probably too late to ask but is this for sale still?
Looks like the wheelhouse off a tugboat!
Rekkaonnettomuus Raaseporissa - pelastuslaitos torjuu kymmenien litrojen polttoainevuotoawww.iltalehti.fi/kotimaa/201712122200599722 Rekkaonnettomuus Raaseporissa - pelastuslaitos torjuu kymmenien litrojen polttoainevuotoawww.iltalehti.fi/kotimaa/201712122200599722_u0.shtml_u0.shtml
Mark McCormick they call that tug old somokey lol
Perfect!
Mark McCormick .... Or a Guard Tower from a prison yard. Well the top part anyways.
Totally! this bi#ch is SUPERMAX!!!
Okay now I get it, there's a link from the selling page. I have seen these and they are HUGE beyond the small screen's ability to envision.
Ten pług przy tym podwoziu to chyba jest do przesuwania wiór drewnianych ? :-)
that's a big dozer , never seen that type before but i am sure back in the day was a monster ! It seems to me she has some skid steering system going on . am i correct ?
A good feature for a sci-fi film
This puts monster truck’s to shame lol 🤣🤣
Looks like its been sitting a while, I do understand the design of the cab and such.
Monster snow clearing machine for motor ways 🤔🤔😨😨😨😨😎
Like a terex dozer 2 engines running different sides
Looks like the driver's dad was coming home soon and just went back and forth to prove a point.
I love this thing
I'm sure maintenance costs killed that thing, like the old Terex dozers with 2 engines. Never seen one before. Probably not many produced
Well, it's not exactly nippy, is it! But very interesting to see a giant skid steer wheeled vehicle.
Lots of traction and black smoke but the attachment points don’t look like they can handle dozer power. The push blade looks like a snow plow and the rippers are no where near D10 strength. No my friend coal must not be very dense and heavy when broken up but the stock piles will compact apparently and that’s what the rippers are for
Boat anchor for a Battleship?
Maybe a stupid question but how does it turn around at curves? Like a tank?
One motor pulled one side so yes. Slow one and hammer the other.
Skid Steer. Not much of a video..............
That's all it is. Not much of a machine either really.
An engineer by the name of Fay Garner at Melroe Muti-Wheel in Longmont Colorado was the brain child behind this machine.
Stuff nightmares are made of ... awesome
How is it the stuff of nightmares?
Sounds and runs a bit Off.. This machine when new back in it's day would have moved My. Everest....👍👍👍
Looks like a cross between a dozer, grader and loader with a bit of snow plow and bicycle thrown in.
IT GOT A TUG BOAT WHEEL HOUSE
2:30 any problems with the left transmission?? the righe wheels work,and the machine rotates,the engines work hardly,but the left wheels dont run. I think the engines are little to move this machine. Min 500 hp each. the left engine,sure the turbo is bad.
amazing machine
It's kinda sick!
So it plows coal while it rolls coal seems like logic too me.
Hello, can I post this video of you on my Facebook heavy machinery page? I found this video very cool and the viewers will like it very much.
The one were i worked at in the 1980's was powered by twin 8v92's
What is this?
awesome
Can see why it never caught on. Bad idea.
Man imagine all the snow you could push with that eh..
O ronco do motor é lindo
thing is a beast
Силён бродяга!!!
Could repurpose it to move snow
Are there any plans to produce any more of these machines?
No, but there are a few still in service.. Hanford waste site uses one.
monster machine
Probably just doesn't get worked enough...cool to see...
It's like big Bobcat
он только по прямой ездит?
That looks like one that i saw in Nashville Tn but it didn't have a blade or rippers
jdan150 I remember that one. It sat in a small parking lot on Spence Lane. I never knew what it was. It's gone now.
I saw it too, actually stopped, took pics and checked it out.
I remember that too!
I well remember that one. It looks a awful lot like the one in the vid. It was custom built by a Nashville outfit though. It was built as a scraper pusher, but it never did go to its first job.
It sat on that corner in Nashville for 20 years or more, they finally cut it up for scrap a few years ago.
Is this Gerald Gentleman power plant in Sutherland, NE? Sure looks like it, I wonder what the hours are I would imagine in the 10's of thousands!
Yeah, thats the place.. you can see this dozer on google maps. It had 7400+ hours on it.
Grande, grande, trabalho nenhum.
Да большая чудо машина базара нет. Но что если он сам еле поворачивается а с грентом вообще будет мне кажется фиаско.
Как вариант не на той передаче все это демонстрировалось
Obviously not very nimble. Maybe on a long it could perform much better but the wheel base is huge
Parece um rebocador de navios, mas esse é com pneus.
Hanford nuclear waste site still uses one of these as a prime mover.
Love to go and play on that
amazing machine what a beast what was it used for what is Buffalo coal ??
Bearwood Brown M870 Buffalo, Coal dozer...I'm going to go out on a limb here and say to push coal.
Only a fucking idiot would ask someone what a COAL DOZER was used for. Are you really THAT fucking stupid??
So much easier to post an inane comment that to search for information isn't it.
ruclips.net/video/rFYPMjnXkFM/видео.html
Sounds like a cat or Bad Cummins
007 Moonrover! or world's largest skidsteer.
I'd say who ever designed it was inspired by le tourno. That thing looks fun though.
Больше вопросов чем ответов, зачем этот пепелац нужен? Не проще и дешевле бульдозер?
Оборотов не берет,дымит...про толкать что то вообще молчу)))
Как неуловимый Джо!
I have driven some pretty good size machines in my day but this one is pretty sick.
barely enough power to move itself little own do some work.
Guess that is why it is parked. no one wants it and too much money to fix it up.
dont look like it can push itself yet alone coal
Reminds me of my exwife....blows a lot of smoke and makes a lot more noise.
Where is located. its for sale
That sure wasn't click bait. It was areal picture.
Click bait for heavy equipment enthusiasts.
I would think the comments about slow speed may be due to the gearing needed to push a large amount of coal
Ironically it obstracts materials that it runs on
Worlds largest skid steer
This is what you get when you take the hull away from tug boat.
Funnily - I had the same thought!
Tem que mostrar e trabalho ndo para ver se desenvolve mesmo...
Не понял, о чём видео?
Dear Santa, Can I have a Buffalo coal dozer with not one but 2 cummins engines in it next Christmas please, even though I have been a good boy if you wish you can leave some coal in the yard also for me to push around. Thanks Santa, Sincerely.....Big engine fan.😁
I'd like to run one with 2 8V-92's in it. The coal would fly then!
TheRebelOne hoho yes I will deliver it next week that will be 51.000000
TheRebelOne nigiotiirijgkgiivi8brgivfivi ihivii
So its a big ass skid steer.
นี่แค่ติดเครื่องเฉยๆนะ ถ้าไปดันดินหนักๆกูว่าควันคงมืดฟ้ามัวดิน😆
It seams like a tug boat..!
It struggles to move itself, cannot imagine what would happen if the ripper or blade was lowered!
Nicholas Pratt Its in low Gear you fuck!
This is how it should move if it was anywhere near fit.
ruclips.net/video/rFYPMjnXkFM/видео.html
VERY good video link! Thanks, Nick!
Amazing this machine. Can i post this video in my facebook page, please?
go ahead
That looks like a Transformer that Michael Bay! refused because it didn't look real.. Oh and that KNOCK... my my...
So you say you have a zombie apocalypse vehicle....well let me just show you mine.
El que invento esa maquina estaba bien fumado el día que pensó hacerla
Que monstro
0k a
Veo el video quería ver ala máquina trabajar
Que pinche monstruo