I FINALLY undesrtood all those feedbacks, false sets, counter-rotations and what not that lockpickers mention all the time. Excelent video, thank you very much!
If you understand the mechanism, you understand the feedback, and why it happens. Mr. Bill has done a BRILLIANT JOB of a visual that shows exactly what you are feeling with a spool. Cant wait to do my first one with the bill knowledge ..
Your ability to distill what you are feeling into a quantitative format for beginners to understand is astounding. You're a true credit to the industry.
My highest compliment, subscribed. Great job. I owned a locksmith shop for years but have been retired for a long time now. Your instructions (with the chart on the box) would have been a godsend when I was learning the trade but the deal back then was "Practice Until You Master It or Give Up Trying". And the locks were mostly simpler then. Mostly 5 straight cylinder (bottom) pins without spool top pins. We called them cylinder pins and top pins. In our shop the standing (internal) motto was "Pick it for a few minutes then drill it or cut it - the customer pays about the same either way". While not entirely true, a new lock costs more than making a key for the old lock or recycling it somehow, we were usually more pressed for time to get to the next customer than to deal with a stubborn lock. Drilling or cutting is quick but the lock becomes near-worthless scrap metal (it has almost zero scrap value). Most locks will give way in the first minute. The rest can take a minute or two more. After then we would break out the drill, saw or bolt breakers and 'Get Er Done Right Now'. (Unless it is an automobile, of course. That is a whole 'nother can of expensive, hugely profitable, worms). Folks may flinch on a $100 tab to get into their house but most wouldn't bat an eyebrow at dropping $200 or more for regaining control of their car. And that was "way back then prices". Probably costs more now. Spool pins were advertised for many years as "Pick Proof Pins". Then downgraded to "Security Pins". I don't know what they refer to them now-a-days, maybe "Pick Resistant Pins"? Really enjoy the series, bosnianbill. Thanks.
Not a lot has changed then... TIME is still the deciding factor. If a rake doesn't open the lock in a few strokes, most locksmiths I know just drill it. No sense in spending 30 minutes on a failed pick, only to have to drill it anyway. Lost time that is difficult to charge for so most guys just cut their losses up front. Thanks for the comments! bill
It seems the more popular videos attract more bots that tripwire the thumbs down tab. Seems like everyone except me has a search or "spider" bot these days. A very good chance a human didn't leave the negative vibes as every typed comment has been positive.
The best part of the video for me is the washer, it just shows how little tension you actually need for picking a lock, Thanks a ton Bill I really enjoy the information you share!
Congratulations and best to you and your family in your retirement, Bill! Thank you for your dedication and contribution to the trade and craft. Good bless.
No, the placement of your tension wrench is really a personal preference. Sometimes the top is better when the keyway is small and you need extra room to work.
Brilliant! Your device is a work of genius! It showed not only where the spool pins were showing up but also, and in my opinion most importantly, how little pressure on the wrench is required.
I hear you're hanging up your hat here on RUclips! We've never met, but you are a dear personality to me (and so many others) all the same. I'm sure your patience, ingenuity, and humility will continue to serve you well, especially with kiddos. I'll do my best to stay legal, but no promises.
This video is amazing. I have some cheap piece of crap lockpick set from eBay and I kept bending them trying to force pressure onto the pins. After watching this I actually understand what's happening and I was able to pick this Lockwood Assa Abloy 120/30 I have laying around a couple of times after spending some hours over the past couple of weeks not knowing what's happening. Your videos are simply the best.
Locksmith: "Let's add these spool pins to enhance security" Bill: "I love spool pins because they tell you when they need to be picked, they make our job easier" Locksmith: "Am I a joke to you?"
By far this is the best example for picking. Shows how little tension you need and how to release it when you set the security pins. Excellent job on this !
The absolute best way to describe and show this. I was getting destroyed by spools because I couldn’t tell which one was ‘begging to be picked’ Thank you so much BB
Bill, this was the video that finally got my head around spool pins, false sets, counter rotation, and all of that. To this day, I think of this video every time I encounter spools. Thank you for the wealth of knowledge you shared over the years. Enjoy your retirement, and time with family.
I've found (as a beginner) that the best way to get a feel for spools is to make a practice lock with just 3 pins, all spools. it lets you focus on just the spools (less confusion than with 1 standard pin imo), and with only 3 pins everything is easy and feedback seems more exaggerated.
AMAZING video! the visual scale was SO useful. Experienced lockpickers often say 'im getting feedback" or things like that, that to be honest, don't mean a whole lot to someone inexperienced like myself, but this is plain as day and makes the whole process of going back and forth between pins, pins dropping back down when you set others etc make so much more sense. I know the washer was tripping you up a bit because its not the same as controlling it with your hand, but watching you have to keep going back to pin 5, the non security pin, to reset it really drove home the whole technique for me. You should do a series of videos like this for all kinds of locks and pins!
I've just started lockpicking as a hobby and I cannot tell you how valuable this video has been. I have a cheap four pin lock that is way too easy but I've been trying to pick a Brinks five pin and could not figure it out for the life of me. I've watched plenty of videos but your explanation about the false set and finding the balance with tension so you can feel the spool pin "talking" to you was the key, I was using entirely too much tension and just binding everything. I grabbed the lock while I was watching this and picked it for the first time in all of about 30 seconds and it was SO satisfying. Thank you.
Spool pin feedback. WOW. Great Job thank you. I belong to a local LOCKSPORT group and have watched hours of videos. And that's the first time i saw that crucial technique. Now show me how to make some of you torque tools.. Those things look sweet
Dude, you are exceptional. I bought a cheap little master 140 and I have got absolutely nowhere with it after many hours. I just can’t feel any counter rotation. I’m about to bin my picks and take up something else.
The 140's are some of my favorite locks for practicing [still a noob], heres the thing, the 140's CAN have 1 spool. There are 140's with no spool, and if it has one, it can be in any of the pin slots. So dont give up! I have 3 140's, only one has a spool and let me tell you, overcoming it for the first time is a great feeling! All the best and good luck
honestly. watching you struggle taught me more then when you just describe what you're doing, and 12 seconds later the lock pops. thank you. great vid.
Absolute perfect way of showing feedback and counter-rotation. I was thinking I understood what I hear you and LPL say. And your indicator jig showed it perfectly.
just bought my first spool pin lock. this is very helpful. I went in blind at first and couldn't figure out what I was doing wrong. turns out I was too heavy on the tension and lost out on feedback because of it. I will update after my next attack
update: I needed to create a thinner pick with a higher reach than the one I had. still took longer, but got a successful open rather quickly after creating the new pick
About 2 months ago, I got serious back into lock picking when I used my set to unlock my neighbors front door kwik-set 5-pin. I recently bought an ultimate challenge lock, and watched this video prior to testing spool pins. I was incredibly surprised after watching this informative video how to set spool pins, the prior knowledge almost felt like cheating. I set 2 pins, 1 standard and 1 spool, and popped it open within the first 20 seconds! I have been able to consistently (in just 2 days) pop a 5 pin staggered hi-lo stack, with 2 spools. Single most informative video I've ever watched! Please keep it up!
I've just begun lock picking as a hobby (even getting my family involved) that washer being to much weight is a beautiful reference point for me to work off of. I've watched a lot of your videos and really admire your skills along with how you have an awesome "Bob Ross esq" approach to lock picking and locks themselves. Many thank yous.
This is the best video I've ever seen explaining the process of picking security pins. I've watch this several times and it never gets old truly fascinating. Please keep up the great work several of us really appreciate it.
This video would be even more amazing if the lock was transparent and you'd film the lock from the side and have the video of that placed right under the measure-thingy (the paper with 4 3 2 1 0 -1 -2 and so on) in your editing program. That way we could see how the pins and pools act meanwhile seeing how it affect the tension wrench, and give us an even deeper understanding of spools
If you have a need to "see" all of that, then you need to keep searching, the lock aint gonna be cut away with a graph, and all spools are not created equal . Not the point. If you learn what Bill has shown you, then you can gut the lock yourself, and understand more...
@@plankhill Best one on the market i think guys, is the cut-away lock put out by Sparrows. Bill & LPL, & Lock Noob have all done reviews. You can even get them with the Chess Set pins.
While amateurs use bottom-of-the-keyway tension, and pros use top-of-the-keyway tension, Bill operates on a level beyond most mere mortals, and uses top-of-the-tension keyway. One day, we will understand.
As ALWAYS you go that extra mile to explain, show and portray for everyone a true art form of feel and in this case, the absolute importance of the tension tool. Until now I just didn’t see (feel) it and now it’s like I’m through the last veil and the secret is revealed. So well done sir! Thank you.
If you're a beginner and have yet to understand what is going on when the pick is inserted and pressure applied, STOP RIGHT HERE. This is a masterclass in what you need to be looking for, why it doesn't always work first time and especially just how little tension you need to apply. Bill, the steps you take to explain things is a real lesson to others.
The best thing IMO of this video is just how LITTLE pressure is needed to open a lock when picking. That washer doesn't weigh all that much, and as we've just seen, anything more than that weight will cause problems! Thanks for the vid! Great job
This video motivated me to have a go at a lock that I had *suspected* had spools and just this motivation together with "just send him home" enabled me to pick it! 4 spools and one standard pin.
Great video! Rather than a show off video, this was very much for the viewer's edification and education. The video not only explains how spool pins work in practice (counter rotation, interaction with non spool pin, etc.), the video also demonstrated the information that's gained by feeling changes through feedback through the tension tool. Such skills require practice to master. There is some subtle muscle memory learning in the process. Thank you for these great educational videos.
Thank you so much for this video. I'm a new lock-picker myself. Only for a couple weeks now have I been getting into the sport. I've been watching you and the other respected RUclips pickers, rounded up all the locks I could find in my garage, bought and fabricated a couple cheap sets, and gave her a go. I had some patient luck with various Master locks I found (a few No. 3s, a No. 4, a No. 5, etc. [many without keys]), however one I hoped would be easier was a 185D (without the key). Quick research revealed this lock had a few spool pins in it. I KNEW I was feeling my first false sets! Between this and the #locknoob video where he explained with the two spool pins and one standard pin in the cutaway lock, the counter rotation feel was perfectly explained, and I knew it as soon as I felt it. Big smile on my face when I got her. A big thank you from Alaska, and keep up the helpful videos and information. Know that it is appreciated.
Thank you so much for everything you've done for this community! We are sad to see you go, but your family come first. I sincerely hope you are able to enjoy your retirement, for many, many years to come!
This is such an incredibly good tutorial. I've only been into locksport for a couple months now and am now challenging myself with security pins, and while watching you and LPL do your thing, I never understood the "how" of what you both were saying with regards to spools. This description of the feedback is amazing and I'm sure I'll be opening security pin locks very soon. Thank you Bill.
After watching this it all fit into place. I now understand what lockpickers mean by the "feel" of lockpicking. Absolutely genius and n invaluable resource for beginners like myself.
I think my girlfriend is now ready to start on security pins and watching this video is going to be step one. Thank you for all the great videos over the years
That chart setup of yours is so simple and effective it's frigging brilliant. You got yourself another sub for that alone. Thanks for all the work you put into these Bill!
The lock manufacturers put in spool pins as a security measure to ward off lock pickers. Bosnian Bill: I love spool pins. They make the job a lot easier for us. Thank you, Bill, for a very informative and helpful video. And thank you for a huge number of great videos. Enjoy your retirement, you've earned it. Bless you and your family.
I'm new to this hobby and I've been working on an Abus Buffo 28/70 for awhile, I was able to open it in 3 minutes after watching this video. This is a really great way to convey the feedback from the lock. Thanks for this great video!
i spent all day long just keeping track of your greatly neatly explained instruction. once again it made me really enthusiastic practicing what i just learned here. great great job man.
This helped me so much. I'm re-keying some locks that my dad had left over from the military that he lost the key for, and every one of them has at least one of the spool pins. One of the last one's I tried had (as you said) 4 spools and one normal pin. This made it so easy to understand, and I've gotten 3 unlocked in about 10 minutes!
Thank you for the explanation. I’m brand new to picking. Got a cheap set like 2 days ago. I had the brinks 60mm lock laying around with no key. After a few videos I figured out there is a spool pin. This video actually explains what that is and what to do. After watching I got that lock open in less than 5 min. Great video!
Thanks to your vids I have learned that my major hurdle was tension, in the few vids that I have watched I have eased up on my tension and I am picking locks so much easier. In fact whilst I was watching this I managed to SPP my master 150 for the first time. Thanks again.
This is the best training video that I have never seen until today. I just got my first set of decent lock picks and was trying to open an extra Brinks front door lock with security pins, and it felt like I kept having to re-set #4 about 8 times before it opened. It turned out I was using too much tension from the get-go, but if I had watched this first, I would’ve detected the spools. I suspect there might be a serrated pin as well, but I can’t gut it .. yet
I only just got into lockpicking as a hobby and have been enjoying your videos! I stupidly started on a Master 140 (only spare lock in the house) and I just opened it thanks to your video. First time i've picked a lock i'm so happy!
thank you so much. As a kid, I picked all sorts of locks but never had an understanding and every video I watched wasn't good at making it easier to understand. good job and that paper measuring tool you made is a good idea it helped so much.
This video made it all click for me. I tried to pick a Master Pro Series with 4 spools and a serrated for 3 days. I watched this video and had it open a short time later. Great demonstration with the gauge and hanging the weight. It also made me realize I was putting too much tension on the wrench.
Now I feel I properly understand what is meant by false sets and alternating tensions (complete beginner trying to learn by youtube alone) thank you, this helps more than you know.
Happy retirement Bill. This video was the one that really started my lockpicking journey. From here I opened my first American 1100 and a gege euro cylinder. Thanks for the great videos and hope you enjoy your free time
Great video , it's been years since I worked in the lock business (20+ years ) and I was wondering when the business went to spool pins, back in the mid 90's these were unheard of in the shop I worked at in socal. thanks
Work like yours will reach out and echo through the ages. Every person you touch and every person they teach are all better off for your uncanny ability to demonstrate and teach all of this.
Dude you are awesome. I have picked a few locks growing up but always just thought I was getting lucky more then actually doing it because I didn't ever really understand the fundamentals of a lock. 32 now and getting into actually learning lock picking now and stumbled onto your videos which have made my interest skyrocket because your so Damn good. Your videos, way of explaining, way of illustrating, and even your sense of humor (minus the picking while under stress skit) makes you an ace of an instructor. Hell I would even give you my sister. Thanks again from the bluegrass.
Thanks Bill, this video helped me so much, I went from being unable to pick spools to picking three euro cylinders in a row. One had one serrated pin and 5 spools. Thanks again, feels great to make progress
Bill your a genius its nice to also know that people like you agonize (suffer quietly) for other peoples benefit. I will have to follow your fine example just in other arenas. Thank you and great video and visual props.
Matc Clinical .... WOW !!!! That's a nice comment I have ever read for a post.....the words well chosen.... "nice to also know that people like you agonize (suffer quietly) for other peoples benefit. I will have to follow your fine example just in other arenas"...........This type of positive comments not only encourages the persons posting the videos.....it also reaches the soul......of every one reading it as it has done to me.Yes!!! agonizing quietly for others benefit....like our Mom & Pop...Like our good teachers.....like good spouse .....like a life long good friendship.......your comment was a tonic to my soul....I am sure it would have done the same to every one who read this ..... you made me feel happy to have suffered quietly all through my life for the benefit of others..... The amazing reward I got was envy of my friends and colleagues..... I go to sleep the moment I hit the Pillow.!!!! Thank you for lifting a soul of a stranger. (Y)
Thank you so much, I just picked my lockwood 120/40, not only did I finally understand the spools I think my tension in general has improved. Been picking for 2 weeks now
That was a champion video, explained something I tend to overlook i.e. going back to a pin over and over if/when necessary instead of just pushing on ahead making picking more difficult. Thank You for sharing that.
I don't have locks. I never picked locks...but this video is so well made I just wanted to tell you that you should become an instructor. Outstanding job explaining things.
What an amazing video. I know nothing about locks, but your explanation is so good and the demo shows EXACTLY what you're going to feel on the tension bar. Very clever, and well presented.
This is the best tutorial on how to pick spool pins, by far! A lot of questions about "false set". I think Bill explains it pretty well, a false set gives you much more movement of the core than an actual set would. This due to the design of the spool. And the false sets gets deeper, just as the sets gets deeper(allthoug much less) in an all standard-pin lock.
This video singlehandedly taught me to pick open by ABUS 55/40 and 55/60 locks after months of attempts. Thank you and may you have a restful and happy retirement!
![[823] Disc Detainer Pick Build (Part 1) - Featuring BosnianBill](http://i.ytimg.com/vi/q1rYhO--TDA/mqdefault.jpg)
![[1432] Inside Perspective: Picking Serrated Pins](/img/1.gif)
This is fabulous, Bill! That chart & weighted wrench setup is absolutely inspired. Really nicely done!
Couldn't agree more! Never seen anything quite like that but what a fantastic idea
I got to agree. This was inspired!
Schuyler Towne I’m a picker and bill is by far a amazing teacher.
Blown away at how instructive this is
Yeah, great visual for me and my fellow newbs.
The quality of Bill's videos from over a decade ago are amazing!
I FINALLY undesrtood all those feedbacks, false sets, counter-rotations and what not that lockpickers mention all the time. Excelent video, thank you very much!
Wishing to add my own thanks to this, the little idicator in the vid really helps.
This was a great presentation. When a pin "raises his hand" it's the one binding and you should get some counter rotation.
If you understand the mechanism, you understand the feedback, and why it happens. Mr. Bill has done a BRILLIANT JOB of a visual that shows exactly what you are feeling with a spool. Cant wait to do my first one with the bill knowledge ..
I understand most of what hes saying. Still dont get what.." false set" means.
Your ability to distill what you are feeling into a quantitative format for beginners to understand is astounding. You're a true credit to the industry.
My highest compliment, subscribed.
Great job.
I owned a locksmith shop for years but have been retired for a long time now.
Your instructions (with the chart on the box) would have been a godsend when I was learning the trade but the deal back then was "Practice Until You Master It or Give Up Trying". And the locks were mostly simpler then. Mostly 5 straight cylinder (bottom) pins without spool top pins. We called them cylinder pins and top pins.
In our shop the standing (internal) motto was "Pick it for a few minutes then drill it or cut it - the customer pays about the same either way".
While not entirely true, a new lock costs more than making a key for the old lock or recycling it somehow, we were usually more pressed for time to get to the next customer than to deal with a stubborn lock. Drilling or cutting is quick but the lock becomes near-worthless scrap metal (it has almost zero scrap value).
Most locks will give way in the first minute. The rest can take a minute or two more. After then we would break out the drill, saw or bolt breakers and 'Get Er Done Right Now'.
(Unless it is an automobile, of course. That is a whole 'nother can of expensive, hugely profitable, worms). Folks may flinch on a $100 tab to get into their house but most wouldn't bat an eyebrow at dropping $200 or more for regaining control of their car.
And that was "way back then prices". Probably costs more now.
Spool pins were advertised for many years as "Pick Proof Pins". Then downgraded to "Security Pins". I don't know what they refer to them now-a-days, maybe "Pick Resistant Pins"?
Really enjoy the series, bosnianbill. Thanks.
Not a lot has changed then... TIME is still the deciding factor. If a rake doesn't open the lock in a few strokes, most locksmiths I know just drill it. No sense in spending 30 minutes on a failed pick, only to have to drill it anyway. Lost time that is difficult to charge for so most guys just cut their losses up front. Thanks for the comments!
bill
ruclips.net/video/d3H2rK-3FaQ/видео.html
VisionStills
Yes me too, I've watched a bunch so far though.
Did he get the intro music from party boy on jackass?
I wanna dance, because locks.
It seems the more popular videos attract more bots that tripwire the thumbs down tab.
Seems like everyone except me has a search or "spider" bot these days.
A very good chance a human didn't leave the negative vibes as every typed comment has been positive.
H
We will miss you, Bill. I'm glad you get to spend more time with your family, now!
The best part of the video for me is the washer, it just shows how little tension you actually need for picking a lock, Thanks a ton Bill I really enjoy the information you share!
The Bob Ross of lockpicking.... Fantastic video!
Set those happy pins. Oh the last one is lonely, set him to his friends
Use your happy lockpick on this friendly stream of spool pins. :-)
Haha that's! Rob Ross of lockpicking 😂
Congratulations and best to you and your family in your retirement, Bill!
Thank you for your dedication and contribution to the trade and craft.
Good bless.
No, the placement of your tension wrench is really a personal preference. Sometimes the top is better when the keyway is small and you need extra room to work.
Brilliant! Your device is a work of genius! It showed not only where the spool pins were showing up but also, and in my opinion most importantly, how little pressure on the wrench is required.
I hear you're hanging up your hat here on RUclips! We've never met, but you are a dear personality to me (and so many others) all the same. I'm sure your patience, ingenuity, and humility will continue to serve you well, especially with kiddos. I'll do my best to stay legal, but no promises.
This video is amazing. I have some cheap piece of crap lockpick set from eBay and I kept bending them trying to force pressure onto the pins. After watching this I actually understand what's happening and I was able to pick this Lockwood Assa Abloy 120/30 I have laying around a couple of times after spending some hours over the past couple of weeks not knowing what's happening.
Your videos are simply the best.
Locksmith: "Let's add these spool pins to enhance security"
Bill: "I love spool pins because they tell you when they need to be picked, they make our job easier"
Locksmith: "Am I a joke to you?"
By far this is the best example for picking. Shows how little tension you need and how to release it when you set the security pins. Excellent job on this !
I am an engineer... if there are negative numbers, there must be positive numbers... I'm sure its a rule. (Call it my anal retentiveness).
Balance is everything :)
I was wondering about that.
This is a BRILLIANT gizmo. I need to make one. Quantifying feedback is huge.
The absolute best way to describe and show this. I was getting destroyed by spools because I couldn’t tell which one was ‘begging to be picked’
Thank you so much BB
You're a smart man. Not only for knowing all this but for thinking of such a great way to visualize what you'd feel. Thanks for the video
best video on the physics of the pins i have ever seen! thanks bill
Bill, this was the video that finally got my head around spool pins, false sets, counter rotation, and all of that. To this day, I think of this video every time I encounter spools. Thank you for the wealth of knowledge you shared over the years. Enjoy your retirement, and time with family.
I've found (as a beginner) that the best way to get a feel for spools is to make a practice lock with just 3 pins, all spools. it lets you focus on just the spools (less confusion than with 1 standard pin imo), and with only 3 pins everything is easy and feedback seems more exaggerated.
AMAZING video! the visual scale was SO useful. Experienced lockpickers often say 'im getting feedback" or things like that, that to be honest, don't mean a whole lot to someone inexperienced like myself, but this is plain as day and makes the whole process of going back and forth between pins, pins dropping back down when you set others etc make so much more sense. I know the washer was tripping you up a bit because its not the same as controlling it with your hand, but watching you have to keep going back to pin 5, the non security pin, to reset it really drove home the whole technique for me. You should do a series of videos like this for all kinds of locks and pins!
Best lock pick tutorial I have ever seen - thank you.
I've just started lockpicking as a hobby and I cannot tell you how valuable this video has been. I have a cheap four pin lock that is way too easy but I've been trying to pick a Brinks five pin and could not figure it out for the life of me. I've watched plenty of videos but your explanation about the false set and finding the balance with tension so you can feel the spool pin "talking" to you was the key, I was using entirely too much tension and just binding everything. I grabbed the lock while I was watching this and picked it for the first time in all of about 30 seconds and it was SO satisfying. Thank you.
This video gave me a moment of realization and now I can pick a couple locks ive never been able to open. Thanks Bill!
Spool pin feedback. WOW. Great Job thank you. I belong to a local LOCKSPORT group and have watched hours of videos. And that's the first time i saw that crucial technique. Now show me how to make some of you torque tools.. Those things look sweet
Been hobbypicking for years now but this is the best video on spools I've ever seen.
Brilliant idea with the visual aid. Makes a lot of sense.
Love the gouryella opening tack Bill. Didn't know the yanks love trance!
Yanks don't, but I do.😀
I'm watching this 8 years after you made the video and it's still the most informative thing I've seen so far..!!
This shows me I'm still using too much pressure even when I think I'm going light. Excellent tutorial, Bill.
A masterpiece of clarity, to add the graphic dimension in such a simple and obvious way. Thank-you for helping me to understand!
Dude, you are exceptional. I bought a cheap little master 140 and I have got absolutely nowhere with it after many hours. I just can’t feel any counter rotation. I’m about to bin my picks and take up something else.
The 140's are some of my favorite locks for practicing [still a noob], heres the thing, the 140's CAN have 1 spool. There are 140's with no spool, and if it has one, it can be in any of the pin slots. So dont give up! I have 3 140's, only one has a spool and let me tell you, overcoming it for the first time is a great feeling! All the best and good luck
@@kevinwallace4635 thanks friend. I got it open the other day but I don't really know what I did. Gonna keep working it till I learn it properly.
honestly. watching you struggle taught me more then when you just describe what you're doing, and 12 seconds later the lock pops. thank you. great vid.
When somebody really understands a technique, they teach is soooo well . Thanks Bill!
Bill you are the BOB ROSS of the picking world . I can watch your teaching videos all day 👍⚒
I'm a beginner and I have been stuck on a lock for ages and I couldn't figure out why. I now know thanks to this video that it had spool pins.
This is a brilliant way to illustrate tension! :-D
Absolute perfect way of showing feedback and counter-rotation. I was thinking I understood what I hear you and LPL say. And your indicator jig showed it perfectly.
just bought my first spool pin lock. this is very helpful. I went in blind at first and couldn't figure out what I was doing wrong. turns out I was too heavy on the tension and lost out on feedback because of it. I will update after my next attack
update: I needed to create a thinner pick with a higher reach than the one I had. still took longer, but got a successful open rather quickly after creating the new pick
About 2 months ago, I got serious back into lock picking when I used my set to unlock my neighbors front door kwik-set 5-pin. I recently bought an ultimate challenge lock, and watched this video prior to testing spool pins. I was incredibly surprised after watching this informative video how to set spool pins, the prior knowledge almost felt like cheating. I set 2 pins, 1 standard and 1 spool, and popped it open within the first 20 seconds! I have been able to consistently (in just 2 days) pop a 5 pin staggered hi-lo stack, with 2 spools. Single most informative video I've ever watched! Please keep it up!
I've just begun lock picking as a hobby (even getting my family involved) that washer being to much weight is a beautiful reference point for me to work off of. I've watched a lot of your videos and really admire your skills along with how you have an awesome "Bob Ross esq" approach to lock picking and locks themselves. Many thank yous.
This is the best video I've ever seen explaining the process of picking security pins. I've watch this several times and it never gets old truly fascinating. Please keep up the great work several of us really appreciate it.
Just beat a Master 140 for the first time. Feel great. Thanks Bill...
This video would be even more amazing if the lock was transparent and you'd film the lock from the side and have the video of that placed right under the measure-thingy (the paper with 4 3 2 1 0 -1 -2 and so on) in your editing program. That way we could see how the pins and pools act meanwhile seeing how it affect the tension wrench, and give us an even deeper understanding of spools
If you have a need to "see" all of that, then you need to keep searching, the lock aint gonna be cut away with a graph, and all spools are not created equal . Not the point. If you learn what Bill has shown you, then you can gut the lock yourself, and understand more...
and if you dont know how a spool pin works, you might want to back up to the basics before this educational video.
Tony O no need to come at someone for saying something would be cool to see, when there are transparent locks.
@@plankhill Best one on the market i think guys, is the cut-away lock put out by Sparrows. Bill & LPL, & Lock Noob have all done reviews. You can even get them with the Chess Set pins.
@@plankhill L
4:05 " We're going to use top of the tension key way "
Locksmiths: they're reverting back to thieves' cant! quick, get the linguist!
Linguist: Sentence doesn't parse properly. Should be "We're going to use top of the key way tension."
Didn't even notice! Brain automatically corrected it in my head!
Nope, @@dlwatib. It should be "We're going to use top-of-the-keyway tension."
While amateurs use bottom-of-the-keyway tension, and pros use top-of-the-keyway tension, Bill operates on a level beyond most mere mortals, and uses top-of-the-tension keyway. One day, we will understand.
As ALWAYS you go that extra mile to explain, show and portray for everyone a true art form of feel and in this case, the absolute importance of the tension tool. Until now I just didn’t see (feel) it and now it’s like I’m through the last veil and the secret is revealed. So well done sir! Thank you.
Thank you Bill. You helped me get my first security pin lock picked. Abus 55/40. Thanks for this tutorial. It was amazing.
If you're a beginner and have yet to understand what is going on when the pick is inserted and pressure applied, STOP RIGHT HERE. This is a masterclass in what you need to be looking for, why it doesn't always work first time and especially just how little tension you need to apply.
Bill, the steps you take to explain things is a real lesson to others.
The best thing IMO of this video is just how LITTLE pressure is needed to open a lock when picking. That washer doesn't weigh all that much, and as we've just seen, anything more than that weight will cause problems! Thanks for the vid! Great job
This video motivated me to have a go at a lock that I had *suspected* had spools and just this motivation together with "just send him home" enabled me to pick it! 4 spools and one standard pin.
Great video! Rather than a show off video, this was very much for the viewer's edification and education. The video not only explains how spool pins work in practice (counter rotation, interaction with non spool pin, etc.), the video also demonstrated the information that's gained by feeling changes through feedback through the tension tool. Such skills require practice to master. There is some subtle muscle memory learning in the process. Thank you for these great educational videos.
Thank you so much for this video. I'm a new lock-picker myself. Only for a couple weeks now have I been getting into the sport. I've been watching you and the other respected RUclips pickers, rounded up all the locks I could find in my garage, bought and fabricated a couple cheap sets, and gave her a go. I had some patient luck with various Master locks I found (a few No. 3s, a No. 4, a No. 5, etc. [many without keys]), however one I hoped would be easier was a 185D (without the key). Quick research revealed this lock had a few spool pins in it. I KNEW I was feeling my first false sets! Between this and the #locknoob video where he explained with the two spool pins and one standard pin in the cutaway lock, the counter rotation feel was perfectly explained, and I knew it as soon as I felt it. Big smile on my face when I got her. A big thank you from Alaska, and keep up the helpful videos and information. Know that it is appreciated.
Thank you so much for everything you've done for this community! We are sad to see you go, but your family come first. I sincerely hope you are able to enjoy your retirement, for many, many years to come!
This is such an incredibly good tutorial. I've only been into locksport for a couple months now and am now challenging myself with security pins, and while watching you and LPL do your thing, I never understood the "how" of what you both were saying with regards to spools.
This description of the feedback is amazing and I'm sure I'll be opening security pin locks very soon. Thank you Bill.
So glad to see this pop up in my feed today…. Was just thinking yesterday of how much I miss Bosnian Bill but I hope he’s enjoying his retirement.
This is teaching at it's best. Showing the fundamentals behind the concept, explaining it in detail. Thank you good so much! You are awesome.
After watching this it all fit into place. I now understand what lockpickers mean by the "feel" of lockpicking. Absolutely genius and n invaluable resource for beginners like myself.
Pin 4, go home your drunk
+sphinix rc I appreciate your humor
That would be the gatekeeper... pin 5 heheheh
Back in... going out... back in ...going out hehehe
@@plankhill Pin 5 has to be female then! :D
I think my girlfriend is now ready to start on security pins and watching this video is going to be step one. Thank you for all the great videos over the years
Great explanation of the counter rotation created by spool pins. Thanks!
although I am not into lock picking , I do thoroughly enjoy your way of teaching or tutoring others. great videos
That chart setup of yours is so simple and effective it's frigging brilliant. You got yourself another sub for that alone. Thanks for all the work you put into these Bill!
This is probably the most informative video I’ve seen on the subject. The visuals help far more than a simple explanation does.
The lock manufacturers put in spool pins as a security measure to ward off lock pickers.
Bosnian Bill: I love spool pins. They make the job a lot easier for us.
Thank you, Bill, for a very informative and helpful video. And thank you for a huge number of great videos. Enjoy your retirement, you've earned it. Bless you and your family.
I'm new to this hobby and I've been working on an Abus Buffo 28/70 for awhile, I was able to open it in 3 minutes after watching this video. This is a really great way to convey the feedback from the lock. Thanks for this great video!
i spent all day long just keeping track of your greatly neatly explained instruction. once again it made me really enthusiastic practicing what i just learned here. great great job man.
Yeah, I held them in my hand for a long time too. I found the vise on eBay for around $25. Do a search for "hobby vice" and a bunch should turn up.
This helped me so much. I'm re-keying some locks that my dad had left over from the military that he lost the key for, and every one of them has at least one of the spool pins. One of the last one's I tried had (as you said) 4 spools and one normal pin. This made it so easy to understand, and I've gotten 3 unlocked in about 10 minutes!
You are so intelligent, brilliant idea for showing angles.
This is by far the clearest explanation for what to feel for thta I have ever seen. Thank you so much for this video!
The engineering that went into this demonstration/presentation is phenomenal. 11/10!
Thank you for the explanation. I’m brand new to picking. Got a cheap set like 2 days ago. I had the brinks 60mm lock laying around with no key. After a few videos I figured out there is a spool pin. This video actually explains what that is and what to do. After watching I got that lock open in less than 5 min. Great video!
6:25 Your the Bob Ross of the RUclips lock pickers! lol (a good thing)
Very patient. Great explanation! This video was VERY helpful! ty
Thanks to your vids I have learned that my major hurdle was tension, in the few vids that I have watched I have eased up on my tension and I am picking locks so much easier. In fact whilst I was watching this I managed to SPP my master 150 for the first time. Thanks again.
This is the best training video that I have never seen until today. I just got my first set of decent lock picks and was trying to open an extra Brinks front door lock with security pins, and it felt like I kept having to re-set #4 about 8 times before it opened. It turned out I was using too much tension from the get-go, but if I had watched this first, I would’ve detected the spools. I suspect there might be a serrated pin as well, but I can’t gut it .. yet
That visual aid was a stroke of genius! Thanks, Bill! :)
I only just got into lockpicking as a hobby and have been enjoying your videos!
I stupidly started on a Master 140 (only spare lock in the house) and I just opened it thanks to your video. First time i've picked a lock i'm so happy!
thank you so much. As a kid, I picked all sorts of locks but never had an understanding and every video I watched wasn't good at making it easier to understand. good job and that paper measuring tool you made is a good idea it helped so much.
This video made it all click for me. I tried to pick a Master Pro Series with 4 spools and a serrated for 3 days. I watched this video and had it open a short time later. Great demonstration with the gauge and hanging the weight. It also made me realize I was putting too much tension on the wrench.
Now I feel I properly understand what is meant by false sets and alternating tensions (complete beginner trying to learn by youtube alone) thank you, this helps more than you know.
What a terrific idea!
This is about as close of an idea that you are going to get without physically doing it. Great job!
Happy retirement Bill. This video was the one that really started my lockpicking journey. From here I opened my first American 1100 and a gege euro cylinder. Thanks for the great videos and hope you enjoy your free time
Thank you for explaining why all spools are easier than all but 1. Tricky. Will remember that for my next repinning session.
Great video , it's been years since I worked in the lock business (20+ years ) and I was wondering when the business went to spool pins, back in the mid 90's these were unheard of in the shop I worked at in socal. thanks
I'm just getting into this hobby and your demonstration with the weight is absolutely genius.
Wow! What a great idea to visually demonstrate the finger feel of pins popping into place. Thanks so much for your expertise!
Work like yours will reach out and echo through the ages.
Every person you touch and every person they teach are all better off for your uncanny ability to demonstrate and teach all of this.
Dude you are awesome. I have picked a few locks growing up but always just thought I was getting lucky more then actually doing it because I didn't ever really understand the fundamentals of a lock. 32 now and getting into actually learning lock picking now and stumbled onto your videos which have made my interest skyrocket because your so Damn good. Your videos, way of explaining, way of illustrating, and even your sense of humor (minus the picking while under stress skit) makes you an ace of an instructor. Hell I would even give you my sister. Thanks again from the bluegrass.
Thanks Bill, this video helped me so much, I went from being unable to pick spools to picking three euro cylinders in a row. One had one serrated pin and 5 spools. Thanks again, feels great to make progress
Bill your a genius its nice to also know that people like you agonize (suffer quietly) for other peoples benefit. I will have to follow your fine example just in other arenas. Thank you and great video and visual props.
Matc Clinical .... WOW !!!! That's a nice comment I have ever read for a post.....the words well chosen.... "nice to also know that people like you agonize (suffer quietly) for other peoples benefit. I will have to follow your fine example just in other arenas"...........This type of positive comments not only encourages the persons posting the videos.....it also reaches the soul......of every one reading it as it has done to me.Yes!!! agonizing quietly for others benefit....like our Mom & Pop...Like our good teachers.....like good spouse .....like a life long good friendship.......your comment was a tonic to my soul....I am sure it would have done the same to every one who read this ..... you made me feel happy to have suffered quietly all through my life for the benefit of others..... The amazing reward I got was envy of my friends and colleagues..... I go to sleep the moment I hit the Pillow.!!!! Thank you for lifting a soul of a stranger. (Y)
Thank you so much, I just picked my lockwood 120/40, not only did I finally understand the spools I think my tension in general has improved. Been picking for 2 weeks now
That was a champion video, explained something I tend to overlook i.e. going back to a pin over and over if/when necessary instead of just pushing on ahead making picking more difficult. Thank You for sharing that.
I love the acute attention to detail in your videos sir. I love spool pins, I have more trouble picking locks without spools.
I don't have locks. I never picked locks...but this video is so well made I just wanted to tell you that you should become an instructor. Outstanding job explaining things.
I have zero ambitions in doing this myself at all, yet is pure entertainment to watch.
What an amazing video. I know nothing about locks, but your explanation is so good and the demo shows EXACTLY what you're going to feel on the tension bar. Very clever, and well presented.
This is the best tutorial on how to pick spool pins, by far! A lot of questions about "false set". I think Bill explains it pretty well, a false set gives you much more movement of the core than an actual set would. This due to the design of the spool. And the false sets gets deeper, just as the sets gets deeper(allthoug much less) in an all standard-pin lock.
This video singlehandedly taught me to pick open by ABUS 55/40 and 55/60 locks after months of attempts. Thank you and may you have a restful and happy retirement!