German G43 Restoration Part 2

In this section I focus on the conversion and cleaning of all metal. I convert the rust off of the metal and you begin to see the action move again. After several cycles of boiling, the layers of rust are removed and all the parts come off the action.

[@jasontorre3267]

Coming along nicely. I would recommend replacing all springs and installing a shooter's kit gas piston. The G43 is WILDLY over gassed. They will crack the bolt shroud and bend the rear of the receiver towards the shooter.

[@smoby101]

@@jasontorre3267 thanks. I did replace all springs before shooting this anymore.