ISELI SAA Fully Automatic Stellite Tipping Machine for Band, Gang and Circle Saw Blades
HTML-код
- Опубликовано: 16 авг 2022
- ISELI is one of the leading providers in the processing of band, gang, and circular saws. The ISELI team in Schötz produces all machines in Switzerland and guarantees high technical know-how with experience of more than 70 years.
Technologies for band saws:
The worldwide largest selection for the processing of band saws. From
automatic machines up to 6-axes-
driven machines, ISELI leaves nothing to be desired.
Technologies for circular saws
:
ISELI sets new standards for carbide-tipped circular saws with the world‘s first fully automatic circular saw
sharpening machine, which does all grinding processes (face, back, chip breaker, and flanks) in one only
operation.
Technologies for gang saws
In 2012, ISELI started a new trend with the gang saw machine type of GS4.
Optimize your business processes with new services!
With annual innovations and developments
ISELI pursues ambitious targets.
ISELI SAA MOST IMPORTANT FEATURES
• The ISELI SAA stellite tipping machine is used for tipping
your band, gang, and circular saw blades. Our proven
technology has an excellent reputation and high quality.
• The stellite is welded on the saw by the resistance welding
method. The structural condition of the stellite does not
change during welding. Cracks and holes in the stellite are
thus avoided.
• The stellite is welded vertically, and the tip size can be
adjusted in length from 4 mm to 10 mm.
• Stellite is picked up from the magazine (5 rods 1000 mm in
lenght each) and is then cut off by a cutting wheel.
• Pre-shaped (square) stellite from 2,5 to 6,5 mm and round
stellite from 3,2 to 6,4 mm dia can be used.
• No need for elaborate saw preparation and grinding of the
saw tip before tipping.
• New tips can be welded directly into existing tips.
• Easy adjustments allow band, circular, and gang saw blades
to be tipped on the same machine.
• Tipping and high-frequency annealing of the band saw
blades are carried out automatically in one process.
• The machine is equipped with an easy-to-use programmable
control unit eliminating the need for expert operation.
• The central height adjusting device gives hassle-free
installation of the saw blade.
• Due to the hydraulic system, the working speed of each part
of the machine can be adjusted individually.
• The latest CE regulations are completely observed.
The electrical equipment corresponds with IEC-60204-1
standards.