The LT1 running on off the 411 PCM First Test Start
HTML-код
- Опубликовано: 2 ноя 2024
- Link to Diagrams I Used
drive.google.c...
Thanks for Watching.
"Links"
FaceBook: goo.gl/uvGhx5
Car's Site: tantinperforman...
Get Tools I Use Here: bit.ly/3OWqQpl
If you like my Videos, Please do Subscribe.
Yo this is awesome. I really want to repin for 411, I've done a repin for 411 on my 98 T/A. Those LT1 engines are great and be fun to cam and tune one hehe
How to make a 96 SS Impala LT1 run on the ground like you did. I've been looking at your video at your wiring harness unclear exactly what you did at the co27 hookup
I'm Trying to remember that connector. If its to the optispark it gets deleted.
@@TanTinPerformance
Do you have another video that's detailed how to hook it up like the way you did.
@@TanTinPerformance thanks for the response and the reply
I have a few more videos on it, I swapped to a 411 pcm to run the engine.
Hi i want to install lt1 gen2 to th400 do you know if i need any adapter
Thank you
Shouldn't need any adapter the if its like the LT1 in the video, if its the new direct injection then yes.
When using the 411 pcm are you also using the factory opti spark for the crankshaft position sensor and cam sensor thank you
On the 96 and up engines there in a crank sensor on the bottom of the front timing cover, 93-95 can be fitted with the 96 and up cover with the sensor along with the reluctor wheel and balancer.
I have a two door Tahoe I got in trade with an lt1 .it's installed but no spark or start. I need help to get it to crank. So og pcm won't work?
The original pcm will would but your limited to tuning, and it will need a vats bypass to run.
How can I check my oil pressure on my 95 Roadmaster LT1? Thanks for this video bro.🔥🔥🔥🔥
Theres a 1/8npt port on the top middle in the back of the block, there could be a port down by the oil filter too. Some had it and Some didn't.
What are you using for the crankshaft sensor and camshaft sensor thank you
I’m using the factory 96 and up crankshaft sensor and not currently using a camshaft sensor.
what software is that you are using on your computer?
Hp Tuners Is what I use to Tune
Please keep me updated.. I’m doing this swap on my 96 LT1.. I don’t know details
Im wanting to do this too. Curious about keeping the egr and fuel evap system though.
? I have a 1994 Chevy Camaro Z28 v8 LT1 can I use an engine from a 1997 Chevy Camaro using the harness and computer would it work .
If your using the 94 harness and computer the 97 engine should work just fine, but if your using the 97 harness and computer the harness is a little different I believe
Yes I had to use the 1997 harness and computer because the 1994 Camaro doesn’t have the crank sensor .. does the crank sensor makes the car start right
How does the computer receive the 24x refluctor signal to know when to fire the spark plugs?
Is this computer communicating with the optispark?
On the Vortec 411 pcm tuning they receive a 4x crank signal from the crank sensor that was added in 96, pre 96 car will need a 96 and up crank sensor/tigger wheel, timing cover, and balancer.
What file would you use for a 96 LT1 running the optispark? Like a 98 truck file?
The 98 obs still used the black box pcm, so the 98 new body style used the ls style engine, you want a file from a 2000-2002 Chevy express van with the 5.7l Vortec
Hi…nice explanation! Where are you from..Iowa? Thanks
Thanks. Yep, I’m in southwest iowa.
How do you do this and run the ls coils ?
I would run a newer fbody harness and mod it to fit the lt1
@@TanTinPerformance yes that’s my plan as my z28 is a 97 I’m going to get a 411 pcm I already have an extra wiring harness I have the coil wiring from a 02 ls and coil brackets and the pcm plugs to start the repin now I need the efi connection 24x deal it’s 450 on eBay and coils and a tune I think that’s it ? Correct me if I’m wrong
@@Hiller5150 sounds like a plan to me, I can’t think of anything else you will need for it.
hola como estas necesito ayuda con mi motor lt1 1993
👍👍
Frist