Very very good vide thank you When PCR is defective it throws black black spots on the page is the way to fix it pcr I just have another method to delete it with water
My HP2055dn 's PCR (38mm) streaks on the very edge. I've wiped it with a Lens cloth cleaner 3 times, but still I get the block of ink every 38mm down the page on the edge. I hesitate to use water. But would water fix this? It only started streaking AFTER I took the cart apart to clean it. Maybe I got some finger oils on it? It is the edge where I had to bang the holding pin (the hardest side) with a hammer (no screws on this model). The PCR didn't look damaged (and in the sunlight, I see no discoloring). Any ideas?
Hello. I have an hp colorlaserjet printer mfp m182n. The problem is that my printer produces squeaking sound. I have lubricated the wiper blade and drum with the toner but after certain prints , the squeaking sound is again produced. Why does this happen? Is it harmful? Any solution?
Sir am using Ricoh SP5200 and My Toner Quickly get in to Waste box. And everytime I Clean Waste box and Cleaning blade then after some Prints or sometimes 1/200 prints thunders of Black Toner apears on Page. i discused with shopkeepers but know one tell me the exact solution , plz. Help me where is the reason
@@viandant5 Seems the magenta drum okay. Because i try to swap full magenta set to yellow position then print yellow in photoshop and surprise the full magenta print great. But when i print magenta in photoshop (in printer is yellow because the swap) the yellow result same like previous magenta. Faded left side. Is it relate to transfer belt?
@@viandant5 i tried to re-install the printer's driver but cannot solve the problem. Then, i tried to disassemble the transfer belt and found the magenta roller are not proper align because of the spring has been pulled out. After fixing the spring, the printer working great now. Thank you for responding to my question. I learned a lot from your video.
Good info! I think my Samsung printer has a PCR problem.
Excellent presentation, many thanks for helping me.
Que buena explicación, gracias.
Super explanation! Thank you very much! Only thing what is missing is how/why PCR has AC and DC.
Excellent video!
Thanks! Very useful video.
Very very good vide thank you When PCR is defective it throws black black spots on the page is the way to fix it pcr I just have another method to delete it with water
Do you want the answer this question ?
Great video! how can i take out the PCR roller on a Samsung C 460? the paper got stuck around the roller
It's in the drum unit, you have to dismantle the drum unit
@@viandant5 awesome thanks- not sure how😂tried everything and none of the parts come off
@@kimjackson6459 You mean the drum unit didn't come off?
My HP2055dn 's PCR (38mm) streaks on the very edge. I've wiped it with a Lens cloth cleaner 3 times, but still I get the block of ink every 38mm down the page on the edge. I hesitate to use water. But would water fix this? It only started streaking AFTER I took the cart apart to clean it. Maybe I got some finger oils on it? It is the edge where I had to bang the holding pin (the hardest side) with a hammer (no screws on this model). The PCR didn't look damaged (and in the sunlight, I see no discoloring). Any ideas?
water is perfect to clean the PCR. are you sure the defect is related to the PCR? it's not the magnetic roller?
I sometimes can see only a black page printed then my sight comes back again seeing the printed picture dream!
Hello. I have an hp colorlaserjet printer mfp m182n. The problem is that my printer produces squeaking sound. I have lubricated the wiper blade and drum with the toner but after certain prints , the squeaking sound is again produced. Why does this happen? Is it harmful? Any solution?
Try this: ruclips.net/video/8oV8mbzfaOk/видео.html
Is there any way of "cleaning" the drum instead of replacing it with a new one?
Yes, rotate the drum and clen it with isopropyl alcohol. lubricate the drum with toner
can we do manual coating of the charging roller which is always get coated ripped of
the manual coating was done 20 years ago. now a new PCR costs less, the rare times it is necessary to change it
So how do you assess the quality of a PCR?
a visula inspection is enought to evaluate the quality of e PCR. if not damaged, a PCR is a good PCR
Thanks
what if reused paper back pages, some encountered problem
You should have no problems unless you use damp or wrinkled sheets
Sir am using Ricoh SP5200 and My Toner Quickly get in to Waste box. And everytime I Clean Waste box and Cleaning blade then after some Prints or sometimes 1/200 prints thunders of Black Toner apears on Page. i discused with shopkeepers but know one tell me the exact solution , plz. Help me where is the reason
May be the environment is too humid or cold, or the transfer roller is defective, or those toner cartridges come from an old stock
@@viandant5 thank u Sir.
My OKI C332 print fade on left side. Only happen when use magenta color. What the cause of this problem?
Check the drum unit, may be the magenta toner roller is out of position
@@viandant5 Seems the magenta drum okay. Because i try to swap full magenta set to yellow position then print yellow in photoshop and surprise the full magenta print great.
But when i print magenta in photoshop (in printer is yellow because the swap) the yellow result same like previous magenta. Faded left side. Is it relate to transfer belt?
@@asfairul It seems more a software problem. I would try to reinstall the printer driver, and update windows.
@@viandant5 i tried to re-install the printer's driver but cannot solve the problem.
Then, i tried to disassemble the transfer belt and found the magenta roller are not proper align because of the spring has been pulled out. After fixing the spring, the printer working great now.
Thank you for responding to my question. I learned a lot from your video.
which type of rubber is used to manufacturer PCR?
conductive rubber with a layer of protective rubber or plastic polymer
charge roler cleaning lower is avilable?
Which printer?
My canon ir 4245 printing black above A4 sheet. Please help me
It's a setting problem I think. Are you sure the right paper format is selected in the print settings?
Samsung 2876nd error code u#2 1112 I chang lazer but problem is continuing what is problem
When change drum pcr change compalsari ?
What do you mean? the charge of the PCR remains the same
Black lines are printout of my printer. What is the solution.?
Without knowing which is your printer it's difficult to say. Try to change the cartridge
Sir
Samsung 2876nd error code u#2 1112 I chang lazer but problem is continuing what is problem
if the problem is not solved probably is a main board problem
muito bom !
when i print middle of the page not printing some locations
Difficult to say without knowing wich printer do you have. May be the cartridge
How to check my pcr is good
There is no other way than to test it into the cartridge. However it's a quite long-lasting component
HP 1536 error 52 please help me or send video
scanner error. check the belt of the scanner, the connections. if nothing happen change the scanner unit
3:20 PCR and the corona wire?!
or the orona wire
My printer keyocera 1800 printer dot dot 8 time at pepar
you mean 8 dots at the same distance verticaly on paper?