Pipe fitting techniques for pipe fitters and fabricators.
HTML-код
- Опубликовано: 13 сен 2024
- Pipe fitting techniques for Fitters, Fabricators and Engineers. If you like the video please subscribe and comment. @technicalstudies. Donate paypal.me/Tech...
#piping #technique #welding #engineering #drawing
Butt welded pipe fittings: pdf
drive.google.c...
ANSI Flanges: pdf
drive.google.c...
Pipe bending methods: pdf
drive.google.c...
Pipe dimension chart: pdf
drive.google.c...
Pipe wall thickness: pdf
drive.google.c...
Post weld heat treatment procedure: pdf
drive.google.c...
Stainless steel cast fittings: pdf
drive.google.c...
Threaded fittings: pdf
drive.google.c...
Valves chart: pdf
drive.google.c...
Olets: pdf
drive.google.c...
Piping interview questions: pdf
drive.google.c...
Piping engineering: pdf
drive.google.c...
Magnetic particle test: pdf
drive.google.c...
Liquid penetrant test: pdf
drive.google.c...
Radiographic test: pdf
drive.google.c...
Ultrasonic test: pdf
drive.google.c...
The piping guide: pdf
drive.google.c...
Welding secrets: pdf
drive.google.c...
Different pipe fitting techniques.
• Different Pipe fit-up ...
Elbow centre marking tutorial
• ELBOW CENTER MARKING T...
TEE center marking
• HOW TO MARK THE CENTER...
Elbow to eccentric reducer fit up
• ELBOW TO ECCENTRIC RED...
Elbow center marking.
• ELBOW CENTER MARKING T...
Elbow to TEE fit up
• ELBOW TO TEE FIT UP. S...
45 degree Elbow to 45 degree Elbow fit up
• HOW TO FIT UP A 45 DEG...
Elbow splitting to two pieces
• ELBOW SPLITTING TO TWO...
90 deg Elbow to 90 degree elbow fit up
• ELBOW TO ELBOW FIT-UP ...
Threaded piping- pipe true length calculation
• THREADED PIPING - PIPE...
Dish head, dish end center line marking
• DISH HEAD, DISH END CE...
Plate flange marking tutorial
• PLATE FLANGE MARKING T...
Gambaran yang jelas,mudah untuk difahami..tq☺️
Terima kasih saudara
Rất ý nghĩa.cảm ơn bạn rất nhiều
Muchas gracias por tu gran comentario.
best
Thank you.
Well done
Thank you.
Superb good job 👌👌👍👍
Thank you.
Great job....
Plz make video on heat exchanger Fab with all parts
Sure. thank you.
Great efforts
Thank you.
Amazing
Thank you.
Thanks for your informative presentations. As always, you've nailed it again. Great job. I'd like to ask which software you use for your pipe work modelling and presentation. Thanks in anticipation.
Thank You Bro.
@@technicalstudies. Which software application do you use for your pipe work modelling and presentation in the video?
@@masterebox Trimble sketchup. www.sketchup.com/try-sketchup
As my passed experience i found that 1 in 3 fittings are not level and 3 of 3 sides of the elbows are more square than the machine bevel, i could wrong it could be less but not 100% of bevels are level. And any fitter will agree with me...
Bro. The level of the fittings mostly depends on the manufacturers and the manufacturing process. In my old days, I had big problems, due to the ovality, lack of squareness, difference in thickness etc. Some construction companies, prefer to buy cheaper materials to save costs but lose money by spending more time and consumables in fabrication. Thank you for the valuable comments.
Alignment flange fit up to elbow..
I will. Thank you.