I noticed with the Bruni is that it really doesn't take much to get the chamber dirty enough to cause the green plastic ubber filler on the 8mm PAK to get trapped in the chamber and causing a failure to feed. My main concern is that the round will seat just barely enough for the firing pin to detonate the primer and cause an out of battery. Is there a better\easier way to keep these chambers clean outside of tearing the slide off and brushing it every 3 or so magazines?
I doubt that the dirtiness is what is causing the green plastic cap to be problematic - that's not supposed to go flying at all, it's supposed to just crack open and vent through while remaining in the brass. I'd blame your blanks for that.
@@fightdesigner Figured, the Bruni's are absolute garbage and I expected it to fall apart sooner after use at a reenactment event. I'll chalk it up to a bad blank round and just use it till it breaks.
@@thehomieJM because what I deal with is plays and movies. Colleges and even High School programs have both plays and sometimes filmmaking programs, and that can mean needing props. Touring productions also sometimes go through schools.
@@jakekatz5102 What website? For a while I had a Spanish company who was willing to ship stuff to the US, which is how I got some of the Umarex M&P9c and a couple other models, but they stopped shipping here. It's always a bit of a risk - I also ordered once through eBay for some models in I think Turkey that we can't get here, and customs apparently rejected them. I at least got my money back from those. Sometimes they just impound stuff and you never get anything. Let me know if it works for you!
@@jerrygutierrez161 Only trademarked Umarex blank firing ones I have are used top venting models. If you don't care about trademarks, the Kimar and Bruni versions can still be bought in the US I believe... and if you just want something to play with, there are TONS of great airsoft blowback versions out there.
![The Complete Story of Destiny! From origins to Shadowkeep [Timeline and Lore explained]](/img/1.gif)
Very interesting review buddy, looking forward to the next instalment.
M16 maybe👍
Hi
Pepper gas ammunition
10 and 15 meters ??
Effective range!!
Regards
Artur
Poland
I noticed with the Bruni is that it really doesn't take much to get the chamber dirty enough to cause the green plastic
ubber filler on the 8mm PAK to get trapped in the chamber and causing a failure to feed. My main concern is that the round will seat just barely enough for the firing pin to detonate the primer and cause an out of battery. Is there a better\easier way to keep these chambers clean outside of tearing the slide off and brushing it every 3 or so magazines?
I doubt that the dirtiness is what is causing the green plastic cap to be problematic - that's not supposed to go flying at all, it's supposed to just crack open and vent through while remaining in the brass. I'd blame your blanks for that.
@@fightdesigner Figured, the Bruni's are absolute garbage and I expected it to fall apart sooner after use at a reenactment event. I'll chalk it up to a bad blank round and just use it till it breaks.
Amazing! How about video about full auto blank guns?
Can do... although firing tests for those can be more expensive, and involve more warning of the neighbors!
The most recent PewTube includes one of those - testing an Ekol Jackal in a Roni housing.
All of Bruni do that. I have a p4 9pakk
Howell makes a 1911 blank conversion kit, but you need to have an actual 1911 to do it.
Yeah, and then you also can't mail it straight to a client, or bring it into a school, etc. etc.
@@pewtubeWhy in God’s name would you need to bring a firearm of any kind into a school???
@@thehomieJM because what I deal with is plays and movies. Colleges and even High School programs have both plays and sometimes filmmaking programs, and that can mean needing props. Touring productions also sometimes go through schools.
Do you know anything about kuzey 1911s?
No, sadly that's another brand we don't have access to in the US (as far as I know)
Fight Designer, LLC I was asking because I found someone who was selling one and it had an orange tip and I was wondering if you could take it off
@@jakekatz5102 No idea. This was in the US?
Fight Designer, LLC no they are sending from Europe but it is declared so it will be able to go to the us
@@jakekatz5102 What website? For a while I had a Spanish company who was willing to ship stuff to the US, which is how I got some of the Umarex M&P9c and a couple other models, but they stopped shipping here. It's always a bit of a risk - I also ordered once through eBay for some models in I think Turkey that we can't get here, and customs apparently rejected them. I at least got my money back from those. Sometimes they just impound stuff and you never get anything. Let me know if it works for you!
You never miss. Course you never hit anything too
Not with blanks, anyway!
@@fightdesigner Seen a guy glue bbs to end of blank rounds but I didn't tell you.
@@JoeHinojosa-ph8yw most of these have some sort of barrel obstruction, even the front-venting ones... so that wouldn't work well.
@@fightdesigner Yeah I think the guy drilled it out . Seen a guy make an airsoft into a 22 LR pistol.But only do experiments in a Zombie apocalypse
Where can I get a 1911 colt ?
Europe? Nobody in the US is importing Umarex blank guns anymore, sadly.
@@fightdesigner well good sir I’m willing to buy one in the USA if anyone has it
@@jerrygutierrez161 Only trademarked Umarex blank firing ones I have are used top venting models. If you don't care about trademarks, the Kimar and Bruni versions can still be bought in the US I believe... and if you just want something to play with, there are TONS of great airsoft blowback versions out there.
@@jerrygutierrez161 I have one if u like
@@zain7852 same one ?
Umarex buy the companie reck so they are the same