FAST ADJUSTERS: The Easiest Way To Adjust Your Go Kart Seat - POWER REPUBLIC
HTML-код
- Опубликовано: 7 май 2021
- In this week's video, we're introducing Fast Adjusters, the easiest way to adjust your go kart seat in our opinion. We love this product and would like to thank fast adjusters for sponsoring this video. Check out their website for details and to pre-order/buy your own Fast Adjuster system:
fastadjusters.com.au
Become a Member of our Channel: / powerrepublic
Check out our Go Kart Racing Rituals tutorial series here: bit.ly/GoKartRacingRituals
OR
Our Race Winning Engines Series Rotax Edition here: bit.ly/RaceWinningEngines
Subscribe to us here: / powerrepublic
For more information or to purchase parts, head to our website:
www.powerrepublic.com.au
Or check out our socials at:
/ powerrepublic
/ powerrepublic
#POWERREPUBLIC #GOKARTS #AD 
Спорт
Guys, this is an awesome product! Check out their website for details and to pre-order/buy your own Fast Adjuster system: fastadjusters.com.au
Just bought a set, where can I find the tee bar you use shipped to the US?
we have them at work, message/email me your address and we can make it happen for you
Very cool!!👍🏻👍🏻
Thanks! I agree!
I like this solution.
yeah its solves a lot of trackside pain points with seat positioning
You guys have all these awesome kart gadgets in Australia! I have been looking for these and Easitune in the United States. But it looks like my only option is to ship them from AU. Anyway, love the video as always!! Thank you for them - they helped me out so much as a wanna-be-mechanic dad for my two kart racers.
Yeah that’s what we are here for my friend. Thanks for tuning in
Just ordered one thru your link @Power Republic
You guys are awesome
Thanks legend 👊👊👊
These look the goods
Hey Nick! They sure are. Definitely what you need for KZ bro!
Anything to make life easier is a winner for me. Thanks for the video, now to crack open the credit card... again!
Hey Allan, thanks for tuning in, yeah they are going to change the game when it comes to seat fitting
nice product
🙏
Hi. May be a daft question but I guess for taller drivers (6 footers) you would space the fast adjuster as back as far as possible then use the side plates for moving it forward by 10mm increments to minimise the weight on the rear tyres until the optimum is found?
you could do that for sure, especially if you are finding it hard to fit in the kart.
I had my first crack at 4stroke enduro with the dual 250cc honda engines. Did very well and my mates are looking to buy one. But my mate is short. We are both under the weight limit so we were hoping to get an adjustable seat and peddles.
we would need a faster system for changing them in pit stops though. More like the sliding rails they run on hire karts
this is maybe not the solution for you. the sod hire karts have a great system to adjust the seat, maybe look at there hire karts?
Weight up the kart, and find a balance on seat position. I do Enduro's and my team mate is over 50cm taller then me (I'm average height, he is tall). I'm driving with flat legs resting on the tie rods, his are up near the steering wheel, it's a balance to find.
Hi power republic love your vids , can you please make a video on how to adjust your go kart seat without fast adjusters for karts that dont meet the requirements
do you mean moving the seat in small increments ?
Can you please do a video or playlist showing how to do all the maintenance steps in the rotax operator’s manual
great idea
Yes, that would be great!
Quick Question, What type of gear oil do you use for rotax fr125?
XPS gear oil is recommended by Rotax
I'll probably need the 'driver adjustment' kit as well. LOL.
True that 😂
Very cool product, really clever idea :) btw, what's the best weight ratio (weight distribution) on karting chassies? 60/40? 50/50? 53/47?
thanks Mat, I reckon its a winner 💯. 53/47 is the most popular. if you don't know any better for yo self, then start there and try forwards/backwards depending if it is oversteering or understeering
looks like you will be punching a lot of holes in the side connectors?
with the steel plates, its no factor. but to start with only drill the hole required. then if you need to move the seat, drill the extra holes
Hi Twin Turbo, you make a very good point. As Power Republic touched on we have the stainless steel side plates to retain the strength and integrity the seat needs, without effecting the flexibility and handling of the go kart. The side plates were designed in accordance to the FIA karting and Karting Australia regulations so that they can be used in competition. We would love to design a system that would't require additional holes to be drilled in the side of the seat but this is not something that would pass the regulations. The main focus of the Fast Adjusters system was improve seat adjustment efficiency. In addition to this the side plates allowed the perfect substitute and guide for what would otherwise be inaccurate and slower adjustments. They also reduce the weakening of the seat from holes breaking through to each another.
I'm located here in the US. I have tried to contact the supposed deal here in the US and Fast Adjusters themselves with no answer from anyone. Little frustrated. Are they still in business and if so do you have them in stock and can you sell & ship to the US?
Yeah boi, I got your back and send to USA 🇺🇸. What model do you want ?
I believe V3.1. Not sure. The kart I'm buying is the 2023 L/N.@@PowerRepublic
Bloody brilliant idea! Never liked the art of seat fitting.
yeah it rips. so easy to change positions, which has always been a major hassle trackside.
It looks awkward to fit correctly, but useful for people needing the adjustments set perfectly for racing.
Hey Christian! No, they're easy as to fit correctly. I must just make them look awkward so you'll tune in every week 😉
What about the seat stays do they have to be re-drilled?
@@davidmcdowell340 this fast change would only have 2 adjustable mounts for the sides, with no additional support unless you drilled for every change. You could find a good set up, then fix the extra supports to secure afterwards im sure if you need them.
@@davidmcdowell340 usually have to re drill holes for the seat stay if you are doing a seat position change, only kart you don't need to do this for is the Arrow
yeah that right, otherwise you can use the adjustable seat stays for Rigetti Ridolfi or OTK
you mean if you have lost your 10mm socket right?
Yeah, makes it more easier to do trackside
10mm socket makes this job a piece of what?
😉
LOL I was wondering if anyone else noticed
@@geevee9728 might have slipped up there. Gotta keep it PG
I noticed too LOL
Their quality control is lacking. At $338 USD I expected a little better than for a bag of nuts and bolts to show up at my door, it’s amazing they weren’t damaged in shipping. Additionally they shipped two of the same side fasteners instead of opposing fasteners. Do not recommend.
Hi wgd997, thank you for your email, we were happy to solve this issue for you straight away back in November 2021. For others reading comments, wgd997 made a very good observation, now there is in fact two of the same side V2.0 Fast Adjusters. This is an update we have made to the to replicate the original seat bolt spacing (side to side). It has been found to better suit seat fitment and does not make you space the lower seat bolts wider or narrower in comparison to original seat brackets. In addition to this we have reviewed and update our packaging to ensure a high standard presentation is achieved with the products arriving safely when dealing with rough shipping and handling that is beyond our control.