Chapters: 0:01 Disclaimer 0:31 Introduction 1:15 Mini Overview of my Huion Kamvas 20 1:50 Taking the Pen Apart 3:41 Why My Pen Wasn't Working, the Broken Wire 4:13 DIY Solder 5:17 Pen Reassembly 5:42 Testing it Out
It's so fortunate that we had the exact same pen with literally the exact same issue. You are a godsend and just saved me $50 from having to buy a new pen. That may not seem like much but for a broke student like me, it's the world. Thank you so much man!
Haha that's awesome! Haha yeah, I'm super careful with it now. I haven't dropped it once since I fixed it, although there have been some close calls haha
oh my Lord I can’t tell you how much grateful I am, I just had a relief breakdown which I’ve never had before in my 23 years old life, like u saved my job and my career, srs thank you sm
I was extremely sad yesterday after my pen stopped working properly and my warranty already expired...then I found this video, tried to go through your instructions and holy crap, it's working!! You saved 60€ from my wallet and I can not tell how thankfull I am .... so at least one big THANK YOU Russell. it helped a lot.
That's awesome Roman! I love hearing of another success story! Yeah I was pretty sad when mine stopped working too, felt so good to fix it though! Happy drawing/sculpting/painting!
That's awesome man! I'm happy to hear! Oh man, solid play on taking it to a phone service store, that's smart, so nice they did it for free! Thanks for the sub!
You don't know how thankful I am for this video. I am not from a good country like USA so I can't even think about asking for support. My nib broke so I used this video to open my pen and carefully take off the little part left. Now is working again! yaay
i can't express in words how absolutely, incredibly enthused i am -- second time ever soldering, first time on _anything_ electronic... and it worked perfectly! (mine was the HS610 -w/- PW100 pen) i thought i'd have to buy a new drawing pad... but nope, seriously the best tutorial video i've seen in a _while_!
thanks so much for posting this video , my pen also broke one wire off from the pc board, followed your instruction and work slowly and gently. You just saved me R1200 in South African currency ($63) and I now have a happy 15 year old again ! Luckily electronics is also my hobby so soldering was not a problem , but it shouldn't be a big one for your average person , or just take it to a phone repair shop and ask them to solder the wire back on if you cant do it yourself.
yea not a worry! I'm so glad to hear it helped. haha, its always nice to come through for the kids! :) oh yes, a familiarity with electronics and soldering makes this an easy fix. Yes that's a good point, I should have maybe mentioned that in my video, I can imagine a electronic repair shop might do it for free or for very cheap since it is such a quick and easy job. glad to hear it helped!
Woohoo that's awesome! Yeah I thought I might need to at the very least drop $50 on a new pen and was so happy when this worked haha, glad to hear it worked out!
You're a real lifesaver, thank you so much! This was the exact same issue with my 1060 tablet's and even tho I'm an electrician, I would NEVER thought that this would be the cause. Also you saved my pen too from being cut in half!
I almost bought a new unit of Huion because my pen doesn't work. And after watched this video I check inside of my huion pen battery free, the wire was detached. I buy a solder in hardware stores and DIY fixing! And it worked! Thanks!
Thanks! I contacted Huion who told me my pen was defective and they told me to buy the WRONG model pen! Which didn't work. I'm sending it back. So glad to find your video - I got the old pen apart - still need to locate a screwdriver and candle and do the rest of the job but I am pretty sure this is going to solve the problem - thanks for taking time to record this video!
Thank you for this! My pen was doing the exact same thing, once I got it apart sure enough it was that one little wire. My DIY attempt at soldering it didn't work to well but I found a simple kit on Amazon for 15 bucks and it worked perfectly once I got it re-soldered! Life and wallet saver!
Yeah no worries! Haha yeah the DIY solder is a little dodgy haha, much better idea to go with the soldering iron haha! Nice job! I'm happy to hear you got it fixed!
I'm so grateful for your video, been trying to work out what the problem was with my pen juttering for days til someone mentioned it may be loose wire - just followed your video to open it up and would you look at that, its a disconnected wire! I'm not brave enough to try soldering but I didn't want to drop a load of money on a new pen without being sure the pen was the problem not the tablet, so thanks so much!
Each pen plus shipping cost me around 50 bucks off amazon, and I already have three, two not working. I got both opened up and fixed for thirty bucks, and they work perfectly. The only regret I have is not finding your video sooner. THANK YOU SO FUCKING MUCH
WORKS! saved myself a 1000 pesos. I tried doing the DIY solder but sadly it didn't work so I just went to a phone repair shop since they have one. They only charge me for 20 pesos, my transpo fair was 30 pesos. overall, I only spend 50 pesos for it to be fix instead of buying a new one. glad I found this! HUGEE HUGEE THANKSSS!
I had this happen to my Kamvas 20 pen. I have a Kamvas 12 that uses the same pen so initially thought I'd use that, but after seeing this, and figuring my tablet is well past warranty anyway, that I would try this tutorial. Turned out to be the exact same issue. So glad that fixing the issue was this easy, that's hopefully put 3 or so years back into this pen. Thank you for this tutorial.
Definitely had the exact same issue, spent 3 hours looking for a fix, came across your vid and sure enough had the same issue. Soldered it and right as rain. Thank you!
holy hell... I was sooo worried my tablet might be broken and I'd have to get a new one... turns out I can fix it myself in a matter of minutes. big relief. Much appreciation to you sir!
Thank you sooooooooo Much. I never dropped my pen but I kept experience pen skips and the buttons on the pen would only sometime work. Spent hours updating drivers, redownloading and reinstall software to no avail. Saw this video and open up my pen and what do I find? one of the wire is no longer attached to the soldering. A quick soldering and the pen is working like new, no more pen skips, no lags. Thanks again for this great video. saved me from buying a new expensive pen and a lot of headache.
Niiiiice! That's awesome to hear! Woohoo! Yeah exactly, I'm sure there have been many people out there that have had the exact same problem but never bothered to try and open the pen up and just struggled with drivers and restarts and cables for hours and days, only to end up spending $60 on a new pen. It's unfortunate that it seems to be a common problem, but its' nice that its at least not super hard to fix. Glad to hear it worked for you!
I'm sure you've probably read this a lot in the responses to this video, but you're indeed a saviour. My pen was driving me insane, and I was already considering buying a new one before I saw this tutorial... Still can't believe how flimsy those components are. They're built to break, and fast. Thanks!
Haha yeah it's always nice when it actually helps someone! Yeah it's top bad, the wire is so thin it's crazy, definitely could have been done better. Glad to hear you got it fixed!
Thanks a lot for the video. I dropped my pen and, the nib broke and there was no way to replace it without taking the pen apart. The remaining part of the nib was inside the little pipe in the coil and it was really difficult to get a grip both with my fingernails or with the tool for removing the nibs. Luckily my nail cutter did the job. I extracted the broken nib, put another one, assembled the pen and now everything works fine.
I actually ended up having a different problem where a little piece of something somehow got stuck behind the nib in my pen, messing up the pressure sensitivity. Although it wasn't the same as your problem, your video definitely helped. I could not figure out how to disassemble the pen until watching this. Thanks!
Thank you very very much! That video helped a lot! I thought my Huion Kamvas 19 is broken but it was only the pen. My husband fixed it thanks to your video!
THANK YOU!! This helped me a lot! The pressure wasn’t functioning correctly and it’s all because of the spring inside getting stuck. Going to be careful with dropping it now! ^^
Thanks man! I had exactly the same issue with PW507 and I guessed what the problem was, but I had no clue how to disassamble this pen and was afraid to experiment with that. Your video helped me a lot! Huge thanks!
No worries man! Glad it helped! Yeah, I had a sneaking suspicion that something broke inside too haha, and it took me like a week and two separate tries before I finally mustered up the courage to keep pulling and pushing and twisting until it came apart. Once it did though, didn't take long until I was back to the drawing board!
@@RussellMidfield Thank you a lot for your courage and persistence to find a way to open it! I only had enough courage to remove buttons' cover, than I just twirl this pen in my hands for a while and shamefully give up haha!
@@RussellMidfield hmmm I have not any paintings on this channel (except for avatar i made 5 years ago lol) this is basically an account to watch not to post. If you wanted to see my drawings here is my art-IG instagram.com/justavs/ You can show me yours if you wanted! BTW you made nice 3D models! Your channel can be usefull for me if I'll finally start to study 3D! Subscribed!
@@HawkSK2SVA Oh sorry I clicked on another account and thought it was yours! Oh but you do paint! Your paintings are very nice! Well done! Yeah, you should try 3d! You are very artistic already, 3d should be no problem for you!
Thanks, my art student daughter was distraught as she had an assignment to finish and her pen stopped working. Got it fixed in no time at all because of this video.
Thank you SOO SOO much!! i struggled alot trying to separate the pen, it just wouldn't budge. I suggest removing the rubber part of the pen, since in my case the rubber part kept spinning and turning so I couldn't put any pressure on the silver ring. BUT since the rubber part is removed be careful and don't don't press too hard because it's a little thin. and HUGE THANKS to my mom, she suggested using a rubber band or any kind of rubber to get a better grip on the pen. She did most of the work since I was tried and losing hope. After a few minutes we finally saw some movement! good news we had a soldering iron and extra solder, bad news is the tip of the soldering iron was kinda messed up and I had no experience, my mom did but she's far sighted and couldn't see well because it was small. Spent many hours yesterday trying, and accidentally dropped solder close to the chip (oops) couldn't get any progress done. Tried again today and I managed to fix it! but my stupidity got the best of me, I didn't EVEN *step out of the room* and I managed to drop the pen! so the wire disconnected again! the faces of my mom and sister when they saw me lol. I'm actually glad I dropped it since it removed the solder that fell close to the chip AND i managed to connect the wire better while soldering it. Long story short, it was a struggle haha! once again, thank you so much! if i hadn't seen your video I would have had to buy a new pen. They're VERY expensive here! 200+ in my currency!
wow. I can't believe how this pen is so vulnerable to fall yet huion didn't even give it any proper means of dissasembling aside from forcing it open by pressure. thanks for this video and instruction, it worked. I just hope HUION will make their pens more durable in the future.
Wow thank you so much! I can't believe it worked... I tried to solder it for like an hour with a candle and eventually tried to do it with the stove, which worked much better for me :)
That's awesome, I'm glad it worked! Haha yeah, the candle took a long time for me too, I gave up the first time, and came back to it later, stove is a much better idea!
Thank you so much. I was worried that I would need to purchase a new pen but this worked perfectly. It turns out that one of the wires was loose like you said. Once I managed to fix it at 2 in the morning lol it worked.
Thank you so much. Worked for me as well. If only more people would see this video. Many pen problems would just disappear in dust. XD I don't know why Huion connects the wires so thin. No surprise this breaks easily..
No worries! I'm glad it helped! Yeah, I try and post this on the Huion subreddit on Reddit every once in a while, when I see people having similar issues as I did, so hopefully more will stumble across it. Haha yea, it's too bad that the way they connected the wire is obviously not well done, but it's nice in that its a relatively easy fix, especially if you have a soldering iron.
holyyyy shit! this is precisely my pen, my problem, and my solution, same solder was broken. thank you so much for the fix, saved me 50 bucks for a new pen
@@RussellMidfield Just need to find the right one that charges via USB and/or by crank. What sites do you recommend besides Amazon to find reliable kits? I also had this bedtime thought about the skill. I can vouch for sewing like you did for soldering because it's another useful skill that can reduce wasting. People throw away nearly new clothes because a button popped off. If you dive deeper into sewing, you can create a lot of things for much cheaper.
Thank you so much dude you save me. my pen wasn't working yesterday and i thought i had the same issue as yours. i dissamble the pen and there was water around the wires and inside the nib plug. Turned out my niece dipped the pen in the fish tank. I dried it well it's working like normal now.
Oh nice! Haha yeah, mine is still going strong a few years later. Haven't dropped it since. I definitely am a lot more careful than I was originally which has helped.
Even after 4 YEARS this problem has not been fixed. I thought my Drawing tablet was downgraded to a small high-resolution monitor after my pen stopped working like it should. Then today my thoughts finally clicked and decided to figure out if I can fix the problem. After 2 hours of work, my pen works again! Now I can get back to my doodles!
In my case, when I droped my pen, the ferrite core inside the coil (a long black cylinder) was broken in two, and I simply glued it back with super glue. Be carreful, do not put too much super glue, just a bit!
Did it work properly? I have the same problem. Like when I try to draw, even if I’m not applying any pressure the pen just clicks everything. I opened the pen and the ferrite core was broken into two, I just gave up and build the pen again. But for you it worked to add glue?
A little tips to separate the pen faster : apply some heat to the joint with a hairdryer, use the highest setting for 30 sec to a minute to melt the glue. I successfully opened it a minute later!
I think each pen has different glue strength. Russel's pen looks much more easier to separate while mine is such a monster, even with the hairdryer trick and hours of twisting! Still, it IS possible to disassemble the pen with your bare hands. You really just gotta go with it
Yeah, in the video I had already spent like half an hour twisting it and separated it, so this was the second time for me, which was a lot easier. The first time took a while though you're right!
i had literally no experience working w any hardware or soldering or ANYTHING but i managed to fix my bitchass pen thanks to u, may everything good happen to u !!!!!!
Thanks mate! Same problem but I don't have a soldering iron so i just use some sew threads and bunch the wire with the solder joint, work fine again :) I bought the H1060P for around 40$ and the pen alone cost 20$ (I know it's cheap but it's half the whole pack price :). I think they made them so easy to broke so they could sell more lmao.
although i couldn't do the solder by myself, this was super helpful to actually find the problem! I'm using a Inspiroy h950p and had the exact same issue, same wire too. I'ts an old tablet but living outside of the US means even a replacement pen for an old model would be pretty expensive for me. Thanks a lot for this video!
so 4 days ago my pen just died on me, and i found this video. i opened up my pen, and the two wiring seemed okay at first but when i gently tap it, one of the wiring came off (?!), i took it to phone repair tech and have it resoldered, its working now, but i bcme very cautios when using the pen now 😥 anyway thanx very much for this video, u are a real hero 🙌🙌🙌 ❤️❤️ if i cant get the pen fixed, i have no fund to buy pen/tablet again,
How to fix when pen pressure doesn't go up and down. Accidentally it was dropped and the pressure stops working. And You deserve much more subscribers and you have mine.
@@RussellMidfield Everything thing is working fine only the pen nib was not going up and down and that was causing it to write in same thickness. But after some time I simply did this hack by dropping the pen from about 5 to 6 cm vertically and the pressure was working. It was like Banging the TV until signal come, but gently.😅
Also, I don't know if it comes under your category can you make Videos on how to make models of molecules in Chemistry. I have seen some of the simulation which has been made on Blender. I wonder how it's done. Thanks your time.
Almost broke my pen doing this, but it works perfectly! For now. I'm surprised how little solder my pen had inside, everything hanging by a thread. Love the device, but not going to lie the pen worries me.
Thanks dude, this allowed me to take the internals OUT and put them in a pen holder that is smaller and feels more like a traditional tool. With a small display tablet i have the original stylus is so unwieldy to me and just gets in the way.
Haha oh nice, that's awesome! Yeah I found I had the hovering issue a month or so ago so I took my pen apart and put it back together and it disappeared!
I decided to take my pen apart because I already purchased a new one and I already don't have a warranty. I wanted to see if this one was just dirty. It started making my fingers tingle and now it doesn't work at all so I think its officially broken. My wires where intact but the right one looked a little off, but I couldn't really see.
Thank you so much! You just saved me a lot of maney and sanity. I was crying cuz me, as a simple student, wouldnt be able to aford such a important item por me.
Thank you very much here in sri lanka i had my tab pen broken pen is as expensive as the tab it self according to government tax thank to you i could fix it easily and one thing you guys are really lucky to be somewhere you get paid for what you do here its a heck😥 thank you again you saved this poor man
Maybe this helps anyone who doesnt want to rip their pen apart! I had the drawing while hovering and pressure problem. I tried to take my pen apart, but i have a recharcheable one and (luckily) was not able to seperate the handle from the rest of the pen. This may not work for you. You might break your pen. Be veeeery careful. I kind of sensed that the white pressure bit where the nib sits might be stuck or something. I could feel it when drawing, it just didnt have the same ability to press anymore. So I got a bobby pin/hair pin and removed the plastil bubble from the straight side. Very carefully put that end just right under the inner edge of the white pressure bit inside the pen. The nib was of course removed while doing this. I tried to pull up the bit in careful, circling motions. I didnt feel anything particular but when I put the nib back in, my problem was fixed and it didnt draw while hovering anymore. Dunno about the pressure sensitivity yet though, but at least the main problem is fixed. Hope this helps. And remember to use your own knowledge, I am not responsible if you break your pen.
I've had this happen with two different pens. I feel like that wire is a common breaking point. First one that broke is fair. I was beating against my thigh to the beat of music. But the second time, it just stopped working. No fall, nothing aggressive. I just put it on its stand, and the next time I picked it up, nothing.
Damn, yeah it definitely seems to be a super common issue from what I've seen. Oh gosh I'm just waiting for it to stop randomly working like that haha, I don't think my hack job of a solder is going to last much longer haha.
@@RussellMidfield Same, it's honestly made doing art a bit scary as I don't want to set deadlines for anything. And as a chronic procrastinator, I need those deadlines, heh.
Thank you Jesus. Thank you Friend. It seems all I needed to do was change my pen nibs. my huion hs611 clicked stuff on its own, making it impossible to draw or animate. Changing the nib(pen tip) worked for me.
My issue was the pen registers at 100% pressure all the time, and while hovering (without contact), so the moment it comes near the tablet, it's 100% pressure down. I replaced the nib, tried clearing it, smacking the pen, adjusting settings... no luck. Opened the pen as per the video, all the wires were fine, the buttons are working fine, no issues, but I can't get into the detachable pen pressure nib unit without removing the wire connection points. Re-assembled, it's still working sort of, but yeah... I don't know if I overlooked something and it was perhaps a Windows 10 issue, but I'm giving up and ordering a replacement pen... which might take a few weeks to arrive (it's not local stock).
I'm using the same size screwdriver as you ,yet after I hold it under fire for even more than 5 minutes, the metal wasn't hot enough to melt through. What am i doing wrong?
Yeah I know, it was strange for me, I just kept trying over and over and over, and all of a sudden, it was hot enough. I probably tried for at least half an hour of repeatedly heating it up. I would say hold it at the bottom of the flame, I read that it's hotter than the top. Don't give up haha, it'll work! I gave up like 5 times, but kept telling myself "its gotta work!" and it finally did, happened so fast it startled me and I almost dropped the screwdriver haha.
@@RussellMidfield Fixed it. I just had to use the opposite side of the screwdriver because for some reason the tip wasn't heating up. I don't think it will last but at least it works. Thanks for the video.
No I didn't, I don't have any on hand right now, I just made use of the solder that was already there, it was enough that I could make the connection again, although just barely.
i have a huion 1060 plus pen. I opened it slowly and there's a black and red cable that was loose i have no idea where they. i have never charged the pen until now, whats wrong with it
i had bought a replacement for my 610 and both the original and replacement both broke within a month in the exact same way, except it was the other solder connection which completely invalidates the pen im a bit late to the party but thanks for the DIY; I might be able to use that old tablet now that i know it isnt cursed lol
Hello , Soo my stylus PW100 (H640P) dropped actidentally and now it keeps on registering / drawing even tho it doesn't make physical contact with the tablet / hovering. I don't know how to fix this, can anyone help me with this? I cannot buy another stylus cuz I'm kinda broke at the moment :'(
Hi, if you follow along with what Russell was doing, then it should be able to work. I had the same issue where it was hovering, but after fixing it, it worked and now I don't have to spend money on a new pen that would have probably have the same issues. I also noticed that it fixes unknown pen pressure issues as well??? I have my pen pressure on the same settings and it works a bit differently, but somewhat more accurate than before. I hope this helps!
@@nisshokudrawz oh that's interesting, thanks for chiming in Nisshoku! I didn't realize this also could help with the hovering issue as well. I'm happy to hear it helped!
Thanks for the great video. Love from Japan. But I ordered a PW507 from Amazon two days before I watched this video. It will be delivered tomorrow. I want to go back in time to two days ago. Well, let's take apart the broken PW507 in front of me.
Haha lol! YES! Thats awesome! I agree, these damn pens haha, they must have a trainee soldering these things! I'm glad to hear its fixed though, back to creating art!
Chapters:
0:01 Disclaimer
0:31 Introduction
1:15 Mini Overview of my Huion Kamvas 20
1:50 Taking the Pen Apart
3:41 Why My Pen Wasn't Working, the Broken Wire
4:13 DIY Solder
5:17 Pen Reassembly
5:42 Testing it Out
It's so fortunate that we had the exact same pen with literally the exact same issue. You are a godsend and just saved me $50 from having to buy a new pen. That may not seem like much but for a broke student like me, it's the world. Thank you so much man!
That's awesome! I'm glad the stars aligned haha
same here, this dude is just a legend
@el_ban6228 haha thanks el_ban, I'm glad it helped
Same pen and problem here atleast i chucked it and deserve my situation a wee bit more than accidental
This video legit saved my life.
The moral of the story is, do not by any means drop your pen.
Haha that's awesome! Haha yeah, I'm super careful with it now. I haven't dropped it once since I fixed it, although there have been some close calls haha
@@RussellMidfield Well that's good to know Russell, I hope others will see this video. We appreciate your solution to this problem.
Yeah no worries, I'm glad it helped.
oh my Lord I can’t tell you how much grateful I am, I just had a relief breakdown which I’ve never had before in my 23 years old life, like u saved my job and my career, srs thank you sm
Haha that's awesome! I'm so glad it helped you!
I was extremely sad yesterday after my pen stopped working properly and my warranty already expired...then I found this video, tried to go through your instructions and holy crap, it's working!! You saved 60€ from my wallet and I can not tell how thankfull I am .... so at least one big THANK YOU Russell. it helped a lot.
That's awesome Roman! I love hearing of another success story! Yeah I was pretty sad when mine stopped working too, felt so good to fix it though! Happy drawing/sculpting/painting!
This worked perfectly for fixing my pen. The soldering inside was originally so flimsy. Thank you for sharing!
That's awesome, I love hearing success stories! It's true, the soldering was pretty weak and the wire is pretty thin, glad it helped!
Brother you just saved me 80$ I took the wire to the phone service store next door and the guy joined the wire for free, works as good as new, SUBBED!
That's awesome man! I'm happy to hear! Oh man, solid play on taking it to a phone service store, that's smart, so nice they did it for free! Thanks for the sub!
You don't know how thankful I am for this video. I am not from a good country like USA so I can't even think about asking for support. My nib broke so I used this video to open my pen and carefully take off the little part left. Now is working again! yaay
That's awesome! It's great to hear it's helping other issues as well!
Repair video is spot on for me. Repaired with soldering iron in 10 minutes total. Saved $50+shipping and works like new! Thanks
Nice! I'm glad it worked! Soldering iron is a much better tool than mine haha!
i can't express in words how absolutely, incredibly enthused i am -- second time ever soldering, first time on _anything_ electronic... and it worked perfectly!
(mine was the HS610 -w/- PW100 pen)
i thought i'd have to buy a new drawing pad... but nope, seriously the best tutorial video i've seen in a _while_!
thanks so much for posting this video , my pen also broke one wire off from the pc board, followed your instruction and work slowly and gently. You just saved me R1200 in South African currency ($63) and I now have a happy 15 year old again ! Luckily electronics is also my hobby so soldering was not a problem , but it shouldn't be a big one for your average person , or just take it to a phone repair shop and ask them to solder the wire back on if you cant do it yourself.
yea not a worry! I'm so glad to hear it helped. haha, its always nice to come through for the kids! :) oh yes, a familiarity with electronics and soldering makes this an easy fix. Yes that's a good point, I should have maybe mentioned that in my video, I can imagine a electronic repair shop might do it for free or for very cheap since it is such a quick and easy job. glad to hear it helped!
THANK YOU SO MUCH. I was just gonna cry and buy a new pen and be contentless for a week but now my pen works good as new again :D
Woo-hoo! Awesome! I'm glad it helped!
I was considering buying a new tablet after a week of frustration.. just can't thank you enough ♥
Woohoo that's awesome! Yeah I thought I might need to at the very least drop $50 on a new pen and was so happy when this worked haha, glad to hear it worked out!
You. Are. A. Life. Saver.
Letting a friend fix it tmr since I don't trust myself with wires.
Haha glad it helped! Good luck! Let me know how it goes!
You're a real lifesaver, thank you so much! This was the exact same issue with my 1060 tablet's and even tho I'm an electrician, I would NEVER thought that this would be the cause. Also you saved my pen too from being cut in half!
Haha yeah no worries! I'm glad it helped!
This is great. I thought my Kamvas was fried. Followed your steps and it's all working again. Thank you for sharing.
Nice! Yeah no worries, I'm glad it helped! It's a relatively easy fix that probably lots of people don't realize
This actually worked! I can't thank you enough. I was dreading buying a new pen. You've saved me a lot of money. Thank you so much, Russell!
That's awesome! Yeah no worries, I'm glad it worked out!
I almost bought a new unit of Huion because my pen doesn't work. And after watched this video I check inside of my huion pen battery free, the wire was detached. I buy a solder in hardware stores and DIY fixing! And it worked! Thanks!
Woohoo, that's awesome!
Thanks! I contacted Huion who told me my pen was defective and they told me to buy the WRONG model pen! Which didn't work. I'm sending it back. So glad to find your video - I got the old pen apart - still need to locate a screwdriver and candle and do the rest of the job but I am pretty sure this is going to solve the problem - thanks for taking time to record this video!
Yeah no worries, good luck!
Thank you for this! My pen was doing the exact same thing, once I got it apart sure enough it was that one little wire. My DIY attempt at soldering it didn't work to well but I found a simple kit on Amazon for 15 bucks and it worked perfectly once I got it re-soldered! Life and wallet saver!
Yeah no worries! Haha yeah the DIY solder is a little dodgy haha, much better idea to go with the soldering iron haha! Nice job! I'm happy to hear you got it fixed!
I'm so grateful for your video, been trying to work out what the problem was with my pen juttering for days til someone mentioned it may be loose wire - just followed your video to open it up and would you look at that, its a disconnected wire! I'm not brave enough to try soldering but I didn't want to drop a load of money on a new pen without being sure the pen was the problem not the tablet, so thanks so much!
Yeah no worries, I'm glad it shed some light on the issue at the very least!
THANK YOU, my pen had the same problem, a wire inside came loose, and we were able to solder it. You're the best!
Woohoo! You're welcome, that's awesome! I'm glad it helped!
Each pen plus shipping cost me around 50 bucks off amazon, and I already have three, two not working. I got both opened up and fixed for thirty bucks, and they work perfectly. The only regret I have is not finding your video sooner. THANK YOU SO FUCKING MUCH
Haha yeah no worries Joe! I'm glad it helped, even if it was a little late haha
WORKS! saved myself a 1000 pesos. I tried doing the DIY solder but sadly it didn't work so I just went to a phone repair shop since they have one. They only charge me for 20 pesos, my transpo fair was 30 pesos. overall, I only spend 50 pesos for it to be fix instead of buying a new one. glad I found this! HUGEE HUGEE THANKSSS!
That's awesome yay! Oh yeah that's a much better idea than what I did haha, good job!
I had this happen to my Kamvas 20 pen. I have a Kamvas 12 that uses the same pen so initially thought I'd use that, but after seeing this, and figuring my tablet is well past warranty anyway, that I would try this tutorial. Turned out to be the exact same issue. So glad that fixing the issue was this easy, that's hopefully put 3 or so years back into this pen. Thank you for this tutorial.
That's awesome! I'm always glad to hear it worked out. Yeah mine is still going strong and it's been a couple of years!
Thanks for this! I had exactly the same problem with my pen, and the warranty refused to cover it. Thanks for being awesome!
Yea no worries, I love hearing about another success story! Happy drawing/sculpting/painting!
thanks a million times. i had the same problem with kamvas 16. fixed in five minutes with this video. I can't describe how glad I am
Yea no worries! That's awesome haha yeah I was so happy when it actually started working again too haha
Definitely had the exact same issue, spent 3 hours looking for a fix, came across your vid and sure enough had the same issue. Soldered it and right as rain. Thank you!
Awesome yeah no worries! Woo-hoo! I'm glad it helped!
holy hell... I was sooo worried my tablet might be broken and I'd have to get a new one... turns out I can fix it myself in a matter of minutes. big relief. Much appreciation to you sir!
Haha yeah I was feeling the same way, I was so pumped when it came back to life! Yeah I'm just glad it helped!
Thank you sooooooooo Much. I never dropped my pen but I kept experience pen skips and the buttons on the pen would only sometime work. Spent hours updating drivers, redownloading and reinstall software to no avail. Saw this video and open up my pen and what do I find? one of the wire is no longer attached to the soldering. A quick soldering and the pen is working like new, no more pen skips, no lags. Thanks again for this great video. saved me from buying a new expensive pen and a lot of headache.
Niiiiice! That's awesome to hear! Woohoo! Yeah exactly, I'm sure there have been many people out there that have had the exact same problem but never bothered to try and open the pen up and just struggled with drivers and restarts and cables for hours and days, only to end up spending $60 on a new pen. It's unfortunate that it seems to be a common problem, but its' nice that its at least not super hard to fix. Glad to hear it worked for you!
same with me.. damn Huion Products.. :(
Haha yeah, it's a little bit of a shame, thankfully I haven't had any other problems so far though!
I'm sure you've probably read this a lot in the responses to this video, but you're indeed a saviour. My pen was driving me insane, and I was already considering buying a new one before I saw this tutorial... Still can't believe how flimsy those components are. They're built to break, and fast. Thanks!
Haha yeah it's always nice when it actually helps someone! Yeah it's top bad, the wire is so thin it's crazy, definitely could have been done better. Glad to hear you got it fixed!
Thanks a lot for the video. I dropped my pen and, the nib broke and there was no way to replace it without taking the pen apart. The remaining part of the nib was inside the little pipe in the coil and it was really difficult to get a grip both with my fingernails or with the tool for removing the nibs. Luckily my nail cutter did the job. I extracted the broken nib, put another one, assembled the pen and now everything works fine.
Awesome! I'm glad it helped!
IT WORKED!!!! Bought a soldering iron and had to reteach myself how to use a soldering iron again, but it worked! Thanks!
YES! That's awesome! Good call on buying the soldering iron haha, candle and an oven mitt isn't the best way haha
This video saved my pen, Thank you!
my sensor had issues with registering pen pressure, and thanks to your vid I know how to calibrate it!
That's awesome! I'm so happy to hear! It's always nice to fix something and save a few bucks!
I actually ended up having a different problem where a little piece of something somehow got stuck behind the nib in my pen, messing up the pressure sensitivity. Although it wasn't the same as your problem, your video definitely helped. I could not figure out how to disassemble the pen until watching this. Thanks!
Oh that's awesome to hear! Yeah opening up the pen seems impossible at first but once you do it once, it's super easy. Glad it helped!
It's amazing to see that their new pens have no spring anymore yet still work based on a compression system.
Oh interesting, didn't know that the design changed like that!
Men you saved my life. THANK YOU Russell for sharing, have a great day :)
Haha no worries David! I'm glad it helped!
Thank you very very much! That video helped a lot! I thought my Huion Kamvas 19 is broken but it was only the pen. My husband fixed it thanks to your video!
You're welcome Suzu! I'm glad it helped!
Dude, that makeshift soldering idea was great. Hell yeah.
Haha thanks man! Can't believe it worked haha.
THANK YOU!! This helped me a lot! The pressure wasn’t functioning correctly and it’s all because of the spring inside getting stuck. Going to be careful with dropping it now! ^^
Nice that's awesome! I'm glad it worked out! Yeah I try to be super careful now haha
Thanks man! I had exactly the same issue with PW507 and I guessed what the problem was, but I had no clue how to disassamble this pen and was afraid to experiment with that. Your video helped me a lot! Huge thanks!
No worries man! Glad it helped! Yeah, I had a sneaking suspicion that something broke inside too haha, and it took me like a week and two separate tries before I finally mustered up the courage to keep pulling and pushing and twisting until it came apart. Once it did though, didn't take long until I was back to the drawing board!
@@RussellMidfield Thank you a lot for your courage and persistence to find a way to open it! I only had enough courage to remove buttons' cover, than I just twirl this pen in my hands for a while and shamefully give up haha!
@@HawkSK2SVA Haha no worries! Your paintings on your channel are awesome btw! You got some talent!
@@RussellMidfield hmmm I have not any paintings on this channel (except for avatar i made 5 years ago lol) this is basically an account to watch not to post. If you wanted to see my drawings here is my art-IG instagram.com/justavs/ You can show me yours if you wanted! BTW you made nice 3D models! Your channel can be usefull for me if I'll finally start to study 3D! Subscribed!
@@HawkSK2SVA Oh sorry I clicked on another account and thought it was yours! Oh but you do paint! Your paintings are very nice! Well done! Yeah, you should try 3d! You are very artistic already, 3d should be no problem for you!
Thanks, my art student daughter was distraught as she had an assignment to finish and her pen stopped working. Got it fixed in no time at all because of this video.
That's great, glad to hear it helped Dan!
Thank you SOO SOO much!! i struggled alot trying to separate the pen, it just wouldn't budge. I suggest removing the rubber part of the pen, since in my case the rubber part kept spinning and turning so I couldn't put any pressure on the silver ring. BUT since the rubber part is removed be careful and don't don't press too hard because it's a little thin. and HUGE THANKS to my mom, she suggested using a rubber band or any kind of rubber to get a better grip on the pen. She did most of the work since I was tried and losing hope. After a few minutes we finally saw some movement! good news we had a soldering iron and extra solder, bad news is the tip of the soldering iron was kinda messed up and I had no experience, my mom did but she's far sighted and couldn't see well because it was small. Spent many hours yesterday trying, and accidentally dropped solder close to the chip (oops) couldn't get any progress done. Tried again today and I managed to fix it! but my stupidity got the best of me, I didn't EVEN *step out of the room* and I managed to drop the pen! so the wire disconnected again! the faces of my mom and sister when they saw me lol. I'm actually glad I dropped it since it removed the solder that fell close to the chip AND i managed to connect the wire better while soldering it.
Long story short, it was a struggle haha!
once again, thank you so much! if i hadn't seen your video I would have had to buy a new pen. They're VERY expensive here! 200+ in my currency!
That's awesome! I'm so glad to hear!
wow. I can't believe how this pen is so vulnerable to fall yet huion didn't even give it any proper means of dissasembling aside from forcing it open by pressure. thanks for this video and instruction, it worked. I just hope HUION will make their pens more durable in the future.
Yeah so easy for it to fail, seems like a common problem unfortunately but I guess the good thing is it's relatively easy to fix!
@@RussellMidfield it wasn't that very easy though. Many will struggle trying to disassemble it.
It's true, have to be persistent.
Wow thank you so much! I can't believe it worked... I tried to solder it for like an hour with a candle and eventually tried to do it with the stove, which worked much better for me :)
That's awesome, I'm glad it worked! Haha yeah, the candle took a long time for me too, I gave up the first time, and came back to it later, stove is a much better idea!
Thank you so much. I was worried that I would need to purchase a new pen but this worked perfectly. It turns out that one of the wires was loose like you said. Once I managed to fix it at 2 in the morning lol it worked.
Yeah no worries! I'm so glad it worked! Haha lol some late night DIY to make it all the more sweet!
Thank you so much. Worked for me as well. If only more people would see this video. Many pen problems would just disappear in dust. XD
I don't know why Huion connects the wires so thin. No surprise this breaks easily..
No worries! I'm glad it helped! Yeah, I try and post this on the Huion subreddit on Reddit every once in a while, when I see people having similar issues as I did, so hopefully more will stumble across it. Haha yea, it's too bad that the way they connected the wire is obviously not well done, but it's nice in that its a relatively easy fix, especially if you have a soldering iron.
I can't thank you enough for sharing this technical solution. It saved me so much trouble and finances. Thank you!
You're welcome alsouris! I'm glad it helped!
holyyyy shit! this is precisely my pen, my problem, and my solution, same solder was broken. thank you so much for the fix, saved me 50 bucks for a new pen
Haha no worries Pema! I'm glad it worked out, that's awesome!
Thank you so much♥️! I got it soldered at a phone repair shop and it's working now! Was thinking about how much I'd have spent getting a new one
That's great oghog! I'm glad it helped!
THANK YOU! This video helped me to change the head of the tip that broke. Now I take my pen delicately after knowing how fragile it is inside :'D
Yeah no worries! I'm glad it helped! Haha yeah I'm very careful with my pen now!
I used a soldering iron for the first time ever to fix my stylus. TYSM for this tutorial.
That's awesome SillyEwe! It's a good skill to have! I'm glad you fixed it!
@@RussellMidfield Thank you. I might look into getting a kit to learn some more on. My sights are set on an FM radio for emergency purposes.
Oh that's a good idea!
@@RussellMidfield Just need to find the right one that charges via USB and/or by crank. What sites do you recommend besides Amazon to find reliable kits?
I also had this bedtime thought about the skill. I can vouch for sewing like you did for soldering because it's another useful skill that can reduce wasting. People throw away nearly new clothes because a button popped off. If you dive deeper into sewing, you can create a lot of things for much cheaper.
Thank you so much dude you save me. my pen wasn't working yesterday and i thought i had the same issue as yours. i dissamble the pen and there was water around the wires and inside the nib plug. Turned out my niece dipped the pen in the fish tank. I dried it well it's working like normal now.
Nice! Yeah no worries, I'm glad it helped!
bought a kit for 18 bucks and fixed it, amazing. Going to hold that pen like a baby from now on.
Oh nice! Haha yeah, mine is still going strong a few years later. Haven't dropped it since. I definitely am a lot more careful than I was originally which has helped.
Even after 4 YEARS this problem has not been fixed. I thought my Drawing tablet was downgraded to a small high-resolution monitor after my pen stopped working like it should. Then today my thoughts finally clicked and decided to figure out if I can fix the problem. After 2 hours of work, my pen works again! Now I can get back to my doodles!
That's crazy to hear this issue is still popping up, disappointing! I'm glad to hear it's been resolved for you though! Happy doodling!
In my case, when I droped my pen, the ferrite core inside the coil (a long black cylinder) was broken in two, and I simply glued it back with super glue. Be carreful, do not put too much super glue, just a bit!
Oh wow that's interesting! Thanks for sharing that!
Did it work properly? I have the same problem. Like when I try to draw, even if I’m not applying any pressure the pen just clicks everything. I opened the pen and the ferrite core was broken into two, I just gave up and build the pen again. But for you it worked to add glue?
Try the glue! There's nothing to lose at this point!
A little tips to separate the pen faster : apply some heat to the joint with a hairdryer, use the highest setting for 30 sec to a minute to melt the glue. I successfully opened it a minute later!
Oh yeah good idea, thanks rani!
I think each pen has different glue strength. Russel's pen looks much more easier to separate while mine is such a monster, even with the hairdryer trick and hours of twisting! Still, it IS possible to disassemble the pen with your bare hands. You really just gotta go with it
Yeah, in the video I had already spent like half an hour twisting it and separated it, so this was the second time for me, which was a lot easier. The first time took a while though you're right!
i had literally no experience working w any hardware or soldering or ANYTHING but i managed to fix my bitchass pen thanks to u, may everything good happen to u !!!!!!
Haha that's awesome! I'm glad it helped!
Thanks mate! Same problem but I don't have a soldering iron so i just use some sew threads and bunch the wire with the solder joint, work fine again :) I bought the H1060P for around 40$ and the pen alone cost 20$ (I know it's cheap but it's half the whole pack price :). I think they made them so easy to broke so they could sell more lmao.
Year no worries, glad it helped!
although i couldn't do the solder by myself, this was super helpful to actually find the problem! I'm using a Inspiroy h950p and had the exact same issue, same wire too. I'ts an old tablet but living outside of the US means even a replacement pen for an old model would be pretty expensive for me.
Thanks a lot for this video!
That's so nice to hear! Yeah replacement pen is pretty expensive it's true. I'm glad this helped!
so 4 days ago my pen just died on me, and i found this video.
i opened up my pen, and the two wiring seemed okay at first but when i gently tap it, one of the wiring came off (?!),
i took it to phone repair tech and have it resoldered,
its working now, but i bcme very cautios when using the pen now 😥
anyway thanx very much for this video, u are a real hero 🙌🙌🙌 ❤️❤️
if i cant get the pen fixed, i have no fund to buy pen/tablet again,
That's great to hear Gaje! I'm glad the video helped!
you saved my career, THANK YOU!!!!
Haha I'm happy it helped! You're welcome!
How to fix when pen pressure doesn't go up and down. Accidentally it was dropped and the pressure stops working.
And You deserve much more subscribers and you have mine.
Thanks man! I appreciate it! Oh no, so the wire is still attached but the pressure doesn't work?
@@RussellMidfield Everything thing is working fine only the pen nib was not going up and down and that was causing it to write in same thickness. But after some time I simply did this hack by dropping the pen from about 5 to 6 cm vertically and the pressure was working. It was like Banging the TV until signal come, but gently.😅
Also, I don't know if it comes under your category can you make Videos on how to make models of molecules in Chemistry. I have seen some of the simulation which has been made on Blender. I wonder how it's done. Thanks your time.
Haha lol! Thats an awesome technique! Haha 😂
Oh interesting, I haven't done anything like that before but I'll give it a try!
Thank you!!! My Huion pen had the same problem and has now been fixed.
You're welcome! I'm glad it worked for you!
Almost broke my pen doing this, but it works perfectly! For now.
I'm surprised how little solder my pen had inside, everything hanging by a thread. Love the device, but not going to lie the pen worries me.
Awesome! Yeah I'm just waiting for it to break again haha, so far it's been ok though!
Thanks bro, you save me, I'm from Mexico and I really want to say you how usefull was your video, thank you so much!!!
You're welcome AJJ! Im glad it helped you out!
I have my tablet back, I just straight up love you
Haha I'm glad it helped!
Thanks dude, this allowed me to take the internals OUT and put them in a pen holder that is smaller and feels more like a traditional tool. With a small display tablet i have the original stylus is so unwieldy to me and just gets in the way.
before anyone asks, yes i lose access to my 2 buttons but i never used them anyways.
Damn man that's advanced stuff! I'm glad it helped!
Thank you so much for this! All I had to do was take my pen apart, and it seemed to fix itself!
Haha oh nice, that's awesome! Yeah I found I had the hovering issue a month or so ago so I took my pen apart and put it back together and it disappeared!
I decided to take my pen apart because I already purchased a new one and I already don't have a warranty. I wanted to see if this one was just dirty. It started making my fingers tingle and now it doesn't work at all so I think its officially broken. My wires where intact but the right one looked a little off, but I couldn't really see.
Interesting, well it's good you waited until you had a replacement haha, taking the pen apart can definitely be risky!
Thank you so much! You just saved me a lot of maney and sanity. I was crying cuz me, as a simple student, wouldnt be able to aford such a important item por me.
Yeah no worries, I'm glad it helped!
Thank you! I managed to solder it back with your instructions!
Yeah no worries Tamara! That's awesome, I'm glad it worked!
Worked for me! Easy fix! Thank you! Was about to buy a new (bigger) pen display...
Nice! Yeah no worries, glad it helped! Yeah it's not too bad a fix!
Thank you very much here in sri lanka i had my tab pen broken pen is as expensive as the tab it self according to government tax thank to you i could fix it easily and one thing you guys are really lucky to be somewhere you get paid for what you do here its a heck😥 thank you again you saved this poor man
You're welcome Smart Science! I'm very happy it helped you!
My tip is stuck in the pen and I can't get it out. What can I do ?
Oh sorry missed your message, did you get it out? Maybe a pair of pliers or tweezers could help.
@@RussellMidfield i broke the pen :(
its like they are doing this on purpose, so many people have issues with this. Thanks for posting this vid!
Haha yeah definitely a very common issue unfortunately!
Maybe this helps anyone who doesnt want to rip their pen apart!
I had the drawing while hovering and pressure problem. I tried to take my pen apart, but i have a recharcheable one and (luckily) was not able to seperate the handle from the rest of the pen.
This may not work for you. You might break your pen. Be veeeery careful.
I kind of sensed that the white pressure bit where the nib sits might be stuck or something. I could feel it when drawing, it just didnt have the same ability to press anymore.
So I got a bobby pin/hair pin and removed the plastil bubble from the straight side. Very carefully put that end just right under the inner edge of the white pressure bit inside the pen. The nib was of course removed while doing this. I tried to pull up the bit in careful, circling motions. I didnt feel anything particular but when I put the nib back in, my problem was fixed and it didnt draw while hovering anymore. Dunno about the pressure sensitivity yet though, but at least the main problem is fixed.
Hope this helps.
And remember to use your own knowledge, I am not responsible if you break your pen.
Wow thanks Cecilia for the detailed write up! Should help someone I imagine!
I've had this happen with two different pens. I feel like that wire is a common breaking point.
First one that broke is fair. I was beating against my thigh to the beat of music. But the second time, it just stopped working. No fall, nothing aggressive. I just put it on its stand, and the next time I picked it up, nothing.
Damn, yeah it definitely seems to be a super common issue from what I've seen. Oh gosh I'm just waiting for it to stop randomly working like that haha, I don't think my hack job of a solder is going to last much longer haha.
@@RussellMidfield Same, it's honestly made doing art a bit scary as I don't want to set deadlines for anything.
And as a chronic procrastinator, I need those deadlines, heh.
Haha yeah gotta have a 12 pack of pens just in case 😅
i am so frustrated, the tip of the nib i'm using snapped and i cant get the stem of the nib out
Taking the pen apart will help. That way you can take the cone off the end of the pen and expose the nib completely.
Thank you Jesus. Thank you Friend.
It seems all I needed to do was change my pen nibs.
my huion hs611 clicked stuff on its own, making it impossible to draw or animate. Changing the nib(pen tip) worked for me.
You're welcome! I'm so glad it helped, even if it was indirectly!
I hope Huion is gonna reinforce the EMR wires that is fixable in case of dropping off a Huion pen a bit hard.
Yeah it's true, the soldering seems a little weak.
Thank you, you really helped me out I fixed my h610 pro v2 pen it had the same problems but now it's all good
Thats awesome! I'm glad to hear it helped!
How did you open?
@@hemachandran0908 first I took the rubber grip off then I pulled off the plastic top after that I soldered the wire back
@@RedReaperOfDeath Thanks 🙂
I opened just now. 🤣
@@RedReaperOfDeath The solder is not broken.
My issue was the pen registers at 100% pressure all the time, and while hovering (without contact), so the moment it comes near the tablet, it's 100% pressure down. I replaced the nib, tried clearing it, smacking the pen, adjusting settings... no luck.
Opened the pen as per the video, all the wires were fine, the buttons are working fine, no issues, but I can't get into the detachable pen pressure nib unit without removing the wire connection points. Re-assembled, it's still working sort of, but yeah...
I don't know if I overlooked something and it was perhaps a Windows 10 issue, but I'm giving up and ordering a replacement pen... which might take a few weeks to arrive (it's not local stock).
Oh interesting, yeah who knows with these things sometimes, so many things that can go wrong, sorry the video didn't help!
it works, instead of melt the wire I simply drop a bit of wax to glue them together.
Oh nice! Oh that's probably much easier, good idea!
I'm using the same size screwdriver as you ,yet after I hold it under fire for even more than 5 minutes, the metal wasn't hot enough to melt through. What am i doing wrong?
Yeah I know, it was strange for me, I just kept trying over and over and over, and all of a sudden, it was hot enough. I probably tried for at least half an hour of repeatedly heating it up. I would say hold it at the bottom of the flame, I read that it's hotter than the top. Don't give up haha, it'll work! I gave up like 5 times, but kept telling myself "its gotta work!" and it finally did, happened so fast it startled me and I almost dropped the screwdriver haha.
@@RussellMidfield Fixed it. I just had to use the opposite side of the screwdriver because for some reason the tip wasn't heating up. I don't think it will last but at least it works. Thanks for the video.
Awesome! Yeah mine looks pretty gnarly but it's still going. Yeah no worries! I'm glad it helped!
Im not sure why but my pen wont come apart right the metal ring won't come off and the hardware wont come out after taking it apart, can you help?
The metal ring isn't super important I don't think. To get the PCB hardware out you need to push in the little button on the back.
Did you use soldering wire for this? mines wire was too short to connect
No I didn't, I don't have any on hand right now, I just made use of the solder that was already there, it was enough that I could make the connection again, although just barely.
@@RussellMidfield should i use a soldering wire?? would it be the same result??
If you have it, then yes, use soldering wire.
I got my nib stuck cuz it broke and I couldn't take it off, this video helped me alot! Thank you
Oh nice yeah no worries! I'm glad it helped in a different way!
i have a huion 1060 plus pen. I opened it slowly and there's a black and red cable that was loose i have no idea where they. i have never charged the pen until now, whats wrong with it
Hmm seems like you probably want to connect those loose cables to the pens circuit board.
i had bought a replacement for my 610 and both the original and replacement both broke within a month in the exact same way, except it was the other solder connection which completely invalidates the pen
im a bit late to the party but thanks for the DIY; I might be able to use that old tablet now that i know it isnt cursed lol
Oh damn that sucks, yeah no worries, I hope it works for the tablet at least!
hey the button's spring of my pen is not working what to do? (my tablet is huion h420)
Oh gosh sorry I'm not sure I only opened this one!
Thank you sooo much ! I had the EXACT same problem with a PW500 Pro !!
Yeah no worries bowzer! I'm glad it helped!
Great video, I had exactly the same problem and this fixed it . THX
Nice! Yeah no worries!
Thanks for showing inside of pencil!
Yeah no worries GB! I'm glad if it helped!
Another broke artist here, you're a saint, thank you very much.
Haha glad it helped Charlie!
Hello , Soo my stylus PW100 (H640P) dropped actidentally and now it keeps on registering / drawing even tho it doesn't make physical contact with the tablet / hovering. I don't know how to fix this, can anyone help me with this? I cannot buy another stylus cuz I'm kinda broke at the moment :'(
Oh hmm, interesting, seems like almost the opposite problem I had. I'm not entirely sure to be honest, sorry, maybe someone else can chime in!
I have the same problem too. 😭
Couldn't open it.
Hi, if you follow along with what Russell was doing, then it should be able to work. I had the same issue where it was hovering, but after fixing it, it worked and now I don't have to spend money on a new pen that would have probably have the same issues. I also noticed that it fixes unknown pen pressure issues as well??? I have my pen pressure on the same settings and it works a bit differently, but somewhat more accurate than before. I hope this helps!
@@nisshokudrawz oh that's interesting, thanks for chiming in Nisshoku! I didn't realize this also could help with the hovering issue as well. I'm happy to hear it helped!
Thanks for the great video. Love from Japan.
But I ordered a PW507 from Amazon two days before I watched this video. It will be delivered tomorrow. I want to go back in time to two days ago.
Well, let's take apart the broken PW507 in front of me.
Yea no worries, I hope it ends up helping you! Haha aww well, maybe you can return the new one if you end up fixing it!
@@RussellMidfield Success!
Fuckin' pw507 has been successfully revived.
Thank you. Love from Japan
Haha lol! YES! Thats awesome! I agree, these damn pens haha, they must have a trainee soldering these things! I'm glad to hear its fixed though, back to creating art!
When you're taking the pen apart, i recommend using a hairdryer to melt the glue. It only took me 2 minutes to take it apart
It's true! Such a good idea, thanks!
@@RussellMidfield update, i fully broke it and just went on amazon to buy a new one :P
Haha oh no! Well at least you tried!
Thank you!! Worked perfectly for my pen
Awesome!! It's always nice to hear of another success!
"Huion pen fell from a high place"
That's how my pen died 😔
Haha yeah me too! But you can fix it!