Products that we use and recommend: ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
Hi , my 2011 bmw 328i coup engine will die on sudden acceleration but will start again after cooling the engine for 20 minutes. please help . your video is great . thank you
Yup. I just left bmw today. I have a p0306 code that won't go away and the car runs like shit. They told me no power was coming from dme but coil had good spark
I expierencedna red oil light on dash car slowed down pulled over car started stalled now car 3 months later still cant figure it out but ecu isent reading maf sensor unplugged or anything thats why i think ecu and wipers go on and un able to control car just cranks no start fuel compression was tested at 60psi twice
Hi! I have a 2007 bmw z4.. was only going to add spare key but my locksmith for some reason ruined my ecu. Now the car won't even start. If i buy used ecu complete set with immobilizer and key, how can i install that? Thanks!
Why don't the people do more research than this youtube video🤷🏾♂️don't blame someone else if others are too stupid to do the work needed in this scenario.
As long as you get the DME, CAS, and Key it should start and run. You can't just get 1 or 2 of the 3. The only issue is that your mileage and other non essential things will be wrong. To get 100% back to stock you'll need someone to reprogram it.
My 2009 BMW 535i was running fine except for the low oil pressure warning light. It didn't start after replacing the ECM with one I bought on eBay. I took it out and now my car won't start even with it's original ECM. Do you have any videos of how to correct this issue? Any advice?
Can somebody please help me my 2011 335is is acting weird it won't start it turns over and when it does come on it idles like crazy up and down and these codes come up and then it shuts off I thought I could fix the problem by replacing the crankshaft positioning sensor still did not fix the problem
Hello i can not read the diagnostic in engine so i thing engine ecu is gone ..car is 2006 e90 320d .if i put second hand ecu in there do i need to make a new program or not pkease aswear ..thanks
What kinds of things would prompt me to change my ECU....im asking because my car has been acting funny and i think it may be the ecu...the wipers keep going and wont stop the abs turns on amd off then i set it to DTC and it turns on and off. This startred happening after i used my scanning tool to reset my check engine light .....would that be the cause ?
sorry i have one question. i have one car bmw e91 and not have key . if i change for another e91 ecu,cas module and key reader with key it’s possible to start?
Hi Where is the transmission model located I have a 2006 BMW 330 I and I’m having issues with the transmission light it dries great daily goals and let me know change the crank shaft sensor and it still doing the same thing like don’t go off
After ecu changing on my bmw e 90 320d... Navigation(gps only) is not working anymore and as well heating seats not working. Any ideea what can be wrong?
It would be handy if you showed how to remove while its in place.thus demio video is not helped me the dar end lup is being stubborn .no video on RUclips actually shows them actual the actual full job of removing
Can you please help me! My bmw 318i e90 2007 starts but won't turn on. With obd scanner it says anti theft..... Is it something in this box like you showed in the video?
First, please understand, if you call an ECU "this box", don't make your own assumptions... Now, when that's out of the way, if there is an error indicating a problem with "anti theft", then your problem will never be in the ECU (DME). Your problem probably lies within CAS or EWS. One thing you can try, if you have a laptop, obd cable and INPA installed, is to re-syncronise EWS with DME. Google it, it's fast and easy.
What does it mean when BMW Service say the BMW 320D ECU has been upgraded? Does it mean the ECU was replaced or the software (???) only was replaced by the latest version?
Products that we use and recommend:
► Panel Removal Set: amzn.to/3YiMADu
► Assorted Fuses: amzn.to/4fx4s3F
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Castrol Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
Would you have to disconnect the batter I'd you remove the ecu or fuses? Thank you in advance
I'm pretty sure you have to, and also wait 20 mins after unplugging battery just in case
If I swap out the ECU computer do I have to reset anything?
Hi , my 2011 bmw 328i coup engine will die on sudden acceleration but will start again after cooling the engine for 20 minutes.
please help . your video is great . thank you
romeo manuel Crankshaft sensor it probably has a SES light (check engine light) on
One of my coil not getting any power you think it’s the ecu and they all new coils
Yup. I just left bmw today. I have a p0306 code that won't go away and the car runs like shit. They told me no power was coming from dme but coil had good spark
Please, where can i order new BMW DDE MD1CP002
I expierencedna red oil light on dash car slowed down pulled over car started stalled now car 3 months later still cant figure it out but ecu isent reading maf sensor unplugged or anything thats why i think ecu and wipers go on and un able to control car just cranks no start fuel compression was tested at 60psi twice
Were is the tcm location in the 06 bmw 325xi e90
Hi! I have a 2007 bmw z4.. was only going to add spare key but my locksmith for some reason ruined my ecu. Now the car won't even start. If i buy used ecu complete set with immobilizer and key, how can i install that? Thanks!
WHY THE HELL DONT YOU TELL THE PEOPLE YOU NEED TO REPROGRAM THE ECU BEFORE YOU SWAP OUT THE FAULTY ONE !!!!!!
Why don't the people do more research than this youtube video🤷🏾♂️don't blame someone else if others are too stupid to do the work needed in this scenario.
Savage
Oh wow. This escalated real quick.
Why the hell he needs to tell you how to put food in your mouth when all he's trying to do is show how to physically remove an ECU
Alrighty then
Very helpful video 👌 same as a E87
Guys I'm struggling car stopped starting I think the computer may have failed no engine light and scanner can't read ecu
Probably the ECM it controls spark
My DME is damaged. My car is 2005 e90. If I get a 2009 e90 DME with the key, do I still need it programmed??
As long as you get the DME, CAS, and Key it should start and run. You can't just get 1 or 2 of the 3. The only issue is that your mileage and other non essential things will be wrong. To get 100% back to stock you'll need someone to reprogram it.
@@bridgetrobertson7134can you get the dme and the key and program it to the original cas?
My 2009 BMW 535i was running fine except for the low oil pressure warning light. It didn't start after replacing the ECM with one I bought on eBay. I took it out and now my car won't start even with it's original ECM. Do you have any videos of how to correct this issue? Any advice?
Ever get it fixed?
Can somebody please help me my 2011 335is is acting weird it won't start it turns over and when it does come on it idles like crazy up and down and these codes come up and then it shuts off I thought I could fix the problem by replacing the crankshaft positioning sensor still did not fix the problem
Javion Smith Whats the codes given
Have the samenoe
hey man i had this same issue , water could have got into your ecu , you could clean the ecu with electrical cleaner
I removed the cover and there’s only relays, where is the ecu located on a e93?cant find it.
I have a 08 535i it needs a new computer and key inable to start the car. How can I find this part number, so I can buy the correct one?
Not easy and pretty sensitive not to break anything, b/c they are very expensive.
Thx for showing.
Great work I can understand welll as u shown in the super video
Can I remove DME without disconnecting battery?
No
it can be boot by kess v2 ? tricore mode ? to read and write
Hello i can not read the diagnostic in engine so i thing engine ecu is gone ..car is 2006 e90 320d .if i put second hand ecu in there do i need to make a new program or not pkease aswear ..thanks
Milan Horvath Yes anytime you swap out the ECU on any car you need to reprogram it so it can re learn
Hello, Can you use a manual ecu in an automatic bmw 3 series?
I want to know also
I want e90 BMW 320d 2005 model lockset
My 2008 328i wont crank after heavy rain, what do you recommend??
check the drain in the ecu compartment. it's probably filled with water and burned the ecu.
@@unknownuser-fy5gy happened to me as well water got in and corroded the dme and need to get it fixed or replaced
What kinds of things would prompt me to change my ECU....im asking because my car has been acting funny and i think it may be the ecu...the wipers keep going and wont stop the abs turns on amd off then i set it to DTC and it turns on and off. This startred happening after i used my scanning tool to reset my check engine light .....would that be the cause ?
Alternator is over charging, I had the same thing
Did you put in a new battery without registering it? If not, sounds like you need a voltage regulator
Hi i need a ECU BMW SERIES 1 2005
sorry i have one question. i have one car bmw e91 and not have key .
if i change for another e91 ecu,cas module and key reader with key it’s possible to start?
Roman Florea Its possible but you will need to reprogram it so it can re learn
Why didn't you just get key care on insurance you dounught 😂
😂😂😂😂😂😂😂😂
Hi Where is the transmission model located I have a 2006 BMW 330 I and I’m having issues with the transmission light it dries great daily goals and let me know change the crank shaft sensor and it still doing the same thing like don’t go off
Pretty sure it's inside the transmission with the valve body (known as mechatronics)
I need help I have a BMW 328i 07 with a p2098 code I replace the O2 sensor but the same code came back what should I do next.
Anthony Jackson Check the fuse or relay
Did u use the part number of the original sensor to purchase the new one ?
08 328i coupe with p0084 code. Any suggestions?
reset.
After ecu changing on my bmw e 90 320d... Navigation(gps only) is not working anymore and as well heating seats not working. Any ideea what can be wrong?
Need to reprogram the ECU or else it will start acting up
Can I use a e90 323i ecu for a e90 320i?
No one is 6 cyl other is 4
It would be handy if you showed how to remove while its in place.thus demio video is not helped me the dar end lup is being stubborn .no video on RUclips actually shows them actual the actual full job of removing
Can you please help me!
My bmw 318i e90 2007 starts but won't turn on. With obd scanner it says anti theft..... Is it something in this box like you showed in the video?
First, please understand, if you call an ECU "this box", don't make your own assumptions... Now, when that's out of the way, if there is an error indicating a problem with "anti theft", then your problem will never be in the ECU (DME). Your problem probably lies within CAS or EWS. One thing you can try, if you have a laptop, obd cable and INPA installed, is to re-syncronise EWS with DME. Google it, it's fast and easy.
@@mraaaaaaa Thank you very much. I will look it up.
Is it a plug and play ? Like you don’t have to program it
I swap my motor and now my car don't do nothing wen I hit the start button
Ecu needs to be programed to your new motor
Thank you very much
What does it mean when BMW Service say the BMW 320D ECU has been upgraded?
Does it mean the ECU was replaced or the software (???) only was replaced by the latest version?
My bmw 318 2007. Dashboad lights but scanner unable to communicate.
Do you have a email I could send a video of what my cars doing ??? Need help
Upload to yout ube then copy and paste the link in the comments no? He will sede it there.
The lid is hard to remove. You left out that part.
Yes they did
Amigo any phone number to consult a problem I have in my bmw
Wow better off buying a Camry