How did I make this Big Embroidery Mistake? First Time Using my 8 In 1 Device.
HTML-код
- Опубликовано: 28 авг 2024
- First time using my 8 In 1 device and look what happened! How did I make this Big Embroidery Mistake? Here are some tips on how to prevent this while embroidering on a sleeve arm. Take a look!
@HeartHustlePrinting / hearthustleprinting
Ricoma Embroidery Machines
ricoma.com/US/...
Ricoma Heat Presses
shop.ricoma.com?referral=katrina-bacon
Get your designs Digitized with Z digitizing
Store Website: zdigitizing.net/
Coupon Code: KatrefOff
Applied Coupon Link: zdigitizing.ne...
Heat Transfer Warehouse Link!
Sublimation blanks, HTV, printers and more!
heattransfer.o...
My Amazon Business Supply Store
Affiliate link (I do earn a small commission when you shop my favorite business products!)
www.amazon.com...
Creative Fabrica All Access for Designs, bundles, templates, fonts and more!
www.creativefa....
HPN Signature series 16x20 Heat Press, Tee Square It Ruler and Logo Pocket GRID and more! (Look Under Heating Supplies to find it! It comes up!
shareasale.com...
Follow Me on Social Media: @Katrinas_gracefulcreations
😂😂😂😂😂😂😂😂😂😂😂😂😅😅😅😅😅😅😂😂😂😂 Im sorry. That was funny. @heart&hustle forgot to tell you to make sure the bottom was clear. 🤨 Shoulda called A-Dubb. It’s all good. That needed to happen. Happened to me too. You learned. Your good now.
Don’t be hating on Joe. He showed me a picture afterwards. His video was on tension not the 8 in 1 device. But after doing that I will definitely never do it again. 😆
@@katrinasgracefulcreations3711 Joe is my guy. I’m just teasing. New Embroidey King. Joe the tension god.
@@adubbproductions sounds like you mad I didn’t give you a bigger shout out than him. Lol 😆 hmmmmm
@@katrinasgracefulcreations3711 I’m
Just here to support my friend shout out appreciate me but not needed. Thank you though. Stop picking with me.
@@adubbproductions Not picking . You laughed at me remember? It’s all good Friend!
I like that you show your mistakes. People really be out here making it seem like everything is so easy and impossible to mess up.
Thank you thank you thank you for your teaching because you make it a lot easier but the rest of us that never get it right the first two or three times around. You are just a wonderful gift to all of us newbies.
That's what I love about you. Most people would not have shown this but you keep it honest and real. Those are more teaching lessons for all of us. Thank you!
You’re very welcome. I show the good and the bad. Even the top in the field make mistakes.
There's a learning curve with everything, especially something that you would like to level up with. You have this.❤️
It was your first time. It’s all good. My old man said to tell you he did a lot worse the first time. I like that you show your mistakes and how you overcome them. You are kicking ass. Thanks for all your knowledge.
Awwwww thank you so much. I’m trying. Lol
Thanks Katrina. You are the first one to mention the sewing field size for the MT1501.
You’re very welcome. It’s important to know your machine and all aspects of
That's what I love about you! You keep it real! I've had those moments and it made me feel sick... Thanks for sharing and always being transparent!🙂
Always I know it’s happened to the best of em I’m just glad I was practicing. Hopefully it never happens again.
I just love you! This is so me! Thank you for always being real and hysterical! OMG LOL
You’re so welcome. I’m a mess. Lol
This was so entertaining. Only the people who have experienced this can relate to the excitement and disappointment all in the same moment. Thank you for sharing the moment. I’ve learned to check once, twice, a third, fourth and fifth time in some cases- design, direction, trace, detailed trace. You’ll never let that happen again. Great video
Gotta check over and over and over again. Lol. Man I’m learning through all my mistakes. I’m glad so many can relate. 😆
So glad you had a chance to meet Joe. I remember when you first got your machine and had some issues with hats I had recommended his channel to you in the comments. You are two of my favorites on RUclips. Continue blessings to you.
Thanks I may have not seen it or had no idea who he was at the time.
That's right you go. New Trend!! I like!
Still amazing work 🙌🏿
Hahaha I love it.. Guess will have to do a video on it @A-Dubb.. Good video always good to show were not perfect.. Also thanks for the shout out!!
You’re so welcome. And he has a video on the 8 in 1. The first time he did it he did the same thing to his pants. Lol
Yup. Joe, you might have been more careful than we were. It’s still fun to watch the fails even knowing I did the same thing. It’s part of the process. Katrina is about to be really good at this. She’s already came a long way. Next she has to get that bobbin thread from showing at the top. Joe. Take it away. Lol 😂
@@adubbproductions Thanks I’m trying to get there! I guess you just passed me off. Lol
You have great energy! Thanks for this!
You are so welcome!
YES!!!
Katrina and A. DUBB are definitely hitting us left and right with these videos and I'm loving every bit of it!!
I came across Heart and Hustles's channel last week and it nearly blew me away with all of the embroidery machines that he has which led me to a comparison video of having multiple needlehead machines all on one line that does all the same one design all at one time compared to having separate machines but connected to each other but able to do different designs all at the same time, I must say that after watching those comparison videos, that is the tough decision to make.
You bring some very imperative information about business to the Forefront and I want to thank you for that Katrina!
Have a wonderful day!!🌞🙏🏽👍🏽💝
Those are my guys. Allan I have known over 20 years and Joe I just got to know and I feel like I have known him for a while. We all out here trying to help everyone grow.
Mistakes are BEST video because everyone learning what NOT to do😊
I agree. Thank you.
I love you guy’s relationship. All of you guys help us so much. And I thank all of you guys for your content.
Thank you for sharing. It is always helpful to learn from mistakes.
Right! Just did that yesterday and it happened on the last letter of the design. It does look good though. We gone learn today.. it wasn't a loss it was a learning experience.
Definitely a learning experience. Lol
Those things happen don't worry about it. I place the 8 in 1 hoop arms first and then attach the hoop with the item, that way can make sure the bottom of item is not on top on the needle plate. Congratulations on your new addition to your shop 🎊
I will definitely be doing that from now on. Thank you so much.
Get a Peggy Stitch Eraser and I don't recommend anything else because another one I tried was trash. It will make getting those stitches out so....more easier. Thanks for sharing the oops!
Tracey
Thank you
I legitimately 🤣 I'm so sorry I wasn't expecting that. Your genuine reaction took me out. So glad that you still put the video out I love real videos.
Lol. Man really thought I had it. I had to show what happened. But thank you so much for watching and 😆 with me at my pain.
thank you, that was very helpful
Loved the video!!
So Luv this video!!!! Thank you for showing the struggle is Real!! I truly appreciate the good with the bad.😍😍🤩🤩💯
Thank you for watching.
The hard part about watching you doing that is that I couldn't say,"Waaaaaaait". AND you cut up the sleeve because you didn't separate from the inside. But, we are all learning in one degree or another. Glad you got it together!!! CONGRATULATIONS!!! Now Rock and Roll!
Definitely learning as ai go and trying to help those on the same journey. Rocking and rolling now.
Katrina the only thing I would’ve done different is I would have put a water soluble topper on top that way your stitches would not sink into the sleeve they would stay on top more
True see I see some people do it and some don’t. I really have to get a feel of when to use it and when not to. Thanks
I love the color of your crop top. You have the cuffs, turn it into a 3/4 sleeve. Great video.
lol! I did that my first time with a duffle bag for a customer! I about died! You learn quick to make sure you cleared the arm….lol it’s awful when you have to pay to replace product! 🤦🏻♀️
I don’t use the sticky back stuff, it tends to gunk the needles up, I just slide cut away backing under (floated) but the fast frames are awesome.
You can float cutaway or tear away
If you resized the design for a narrower hoop, it would fit. The skinny sleeves are not easy, probably need to keep designs for sleeve cuffs under 2” wide.
Oh my...I have done this plenty of times. I will say definitely a good lesson. I use my seam ripper as well but also get the old fashioned razor blade and carefully slice the threads and then use tweezers to pull out! #ExquisitelyYours
Ooooh thanks for the tip! Much appreciated
I knew it as soon as you put it on! Oh My God! 😂😂😂😂😂😂😂 I was wondering what you were going to do to keep it apart from the other side!
When you clamp, put a clamp each side at where the item is on, clamp each side where design will be embroidered most and clamp at bottom, it should hopefully keep your item from shifting.
I just did the same thing on a purse provided by the customer!..Embroidered the hoop into the purse..use one of those razors/ trimmers to cut the stitches
It happens to the best of us
Oh no!!! I did mine upside down in my 8-in-1 video too but luckily I caught it right away 😂 lesson learned!
Gurrrlllll I saw your video and still forgot to flip it. Lol
You can get these hoops for other machines. This set is Ricoma’s version of Durkheim Hoops.
Good video thanks it happens
You bet
Nice design, shame about the 1st sleeve. There is a technique you should look up, called REVERSE HOOPING, also called UPSIDE DOWN HOOPING, people use it to do Xmas stockings and things with tight spaces. Basically you put sticky stabliser on TOP of the hoop, sticky side facing down, stick it to your item, carefully cut out the paper covering the sewing area ONLY. The hoop will be on top of the item instead of in it, and the emboidery arm will be the only thing in the item, so it will move more freely. For a better understanding, check out REVESE HOOPING and UPSIDE DOWN HOOPING. Good luck to all who try it.
Thanks I will definitely check it out and look into it.
This was so funny to watch! OMG! Lol ..I don't have an embroidery machine or plan to get one though
Lol. I have a love hate relationship with my embroidery machine. Thanks for watching.
Someone asked me to embroider their name on their culinary uniforms, i.e., coat, cap, apron all was fine until I had to place their initials on the pocket of the apron...OMG I was ready to rip open the seam float it and sew the pocket back, but something said, "Girl Pull Out that Fast Frame" and try it. Thank you for your video > socks, sleeves, footies look out. 😊
Yup you can do it all with these fast frames
You live and you learn….Been there 😂
Open the seams then later sew them backup, if not u will distort the sleeve
This was funny I know The OG A.DUBB lol right now OMG ….. Good 1😅
Just make it a Theo and Denise Huxtable shirt clothes line, LOL!😂😅. Remember the shirt Denise made Theo on the Cosby Show?
Lol. I sure do. Funny. Loved that episode.
This is what I find hard with fast frames (what mine are called) - small things still have to fit around the throat, but when I want it to scan my sticker - OMG - can't really scan for small items as the machine wants to move more than it really can with the item on it? Hope this makes sense. Thank you for your video!!
I understand
My husband stitched the neck of a sweatshirt to the front- I sent this to him since he could relate.
It happens more than you know smh
Cut the sleeves and make it a short sleeve shirt. It’s not wasted.
I guess but I loved it as a long sleeve crop.
Did that many times. 😳
And how do you adjust your bobbin on the fly? Are you gonna share that information with us to please?
I'm freelanceing digitizer
Ms. K , Been there!!!!! Yikes!!! Right. it's not happening with that ripper. Cut and Patch! Your first and last time right!! You got next. I feel for you! Ouch!!!
I know right. Lol. I couldn’t get it out. Next time I will get it right.
Not the Gordan Gartrell.. 🤣 Denise Huxtable is somewhere smiling
Lol. Right. 😂
Slimline 2 are way better than the 8n1 reason is you don't need to use adhesive backing. Look into that one.i can see your going to sew the arm together before watching
I already have this. No need. Lol
What is special code for your mighty hoops.
You do have to call them in order to use my code they don’t have a way to apply it online. Here is the link for the code and the website
ruclips.net/user/shortsmheKYsy0Q_g?feature=share
Black Queen ... Did you trademark your name through an attorney or did you do it yourself. Thanks
No I did not. Not yet anyway
U could have made the design smaller on the screen using the same hoop!
I made the design smaller in the software. There is a difference when doing it on the screen
Soon as you said let me take the arms off lol. It was at that moment I knew you messed up. I've done it lol just not on camera lol. I know the frustrating feeling. While you was saying OMG I was SMH at myself.
Lol. Man I really thought I had it. I think everyone has done it. Allan and Joe (some of the best) told me they did it too. I was just crazy to record it. Lol
@@katrinasgracefulcreations3711 lol yes I've seen there errors especially Allen lol. But hey I appreciate you'll being honest and showing what not to do. We live and we learn especially with these embroidery machines lol
@@irvinoneil that’s right he does have a video where he sewed the pants shit I seen it. We have to be honest with you all. Only way to be and learn.
Facts lol. Thank you for all you display on RUclips. Have a wonderful day
@@irvinoneil likewise
Im sorry however you have to laugh a little 😂😂😂😂😂😂😂😂😂😂its ok you was too excited with the 8 in 1 hoop
We all have mistakes its good to see that you shows us even the Pros have a bad day
I was too hype like my son’s clothes lines. I guess that’s what makes it so funny. I thought I was doing something. Lol. Lesson learned slow down and pay attention lol.
Get a stitch eraser
doesn't an upside down cross have something to do with a pentagram? it is common for the upside-down cross to be used as a symbol of atheism, humanism, and the occult. Several black metal bands use an inverted cross to call attention to their supposed devotion to Satan. Upside-down crosses appear in horror movies such as The Omen and The Conjuring as a signal of demonic activity. The symbol crops up in tattoos, on pendants, and as a logo on t-shirts. Sometimes, it is accompanied by statements such as “Believe in Yourself,” “There Is No God,” “Black Mass,” or “Not Transformed.” In these contexts, the obvious intent of the inverted cross is to declare an opposition to Christianity. Turning the cross upside down becomes a means of denying the truth of Christ and mocking His sacrifice. Not hating, but I wouldn't wear that. I love your videos by the way!
I have never heard of that. It’s not that serious. It was a simple design I chose to do for the video.
Trace before you put the sleeve on.
I did 50 million traces. I showed it in the video.
OMG 😂
I know right 😂