All Permanent Magnet Motor Working Prototype
HTML-код
- Опубликовано: 11 сен 2024
- We were inspired on working on a prototype of a free energy all permanent magnet motor because of this patent: patentscope.wi...
This free energy prototype has 6 rotors at 12 magnets each for a total of 72 strong neodymium magnets. The entire free energy permanent magnet motor is made out of sturdy plastic and the shaft bearings, collars, and screws are made out of stainless steel so that there’s no interference with the permanent magnets. The permanent magnets on the rotor are all facing north. Each rotor is offset to each other so that they’re all on an angle, the permanent magnets on the first and last rotor have to align and overlap. The rotor weighs approximately 10 pounds. The permanent magnets on the rotor are very strong and respond to the permanent magnets on the stator from a two or three inch distance. The stator magnets alternate north south and are on an angle opposite of the angle on the rotor. The rotor is not self starting, it needs a small push to get going. Also, the magnet motor runs at a very low RPM. We believe more stator arms are required equally spaced around so that the combined forces can accelerate the rotor. The original motor in the patent used magnetic shielding and runs at a very high RPM, our small prototype does not have any magnetic shielding. The permanent magnets we used are very strong neodymium magnets and they are 1/2” thick by 1” long and each one can lift 35 pounds. We tried multiple different combinations of permanent magnets on the stator which did not work, the one combination that did respond with the rotor is shown in the video. All parts were cut out on a precision Cnc machine with 0.004 accuracy. We believe great precision is required when attempting an all permanent magnet motor because the timing of these kinds of motors is created by the strategic placing of the permanent magnets.
Website: mindoftesla.com
Delron is wonderful ! Thanks dad for your help.
THATS SOME CRAZY TORQUE MAN . DRIVE A GENERATOR HEAD WITH THAT TORQUE MAN.
Looks pretty fun as an exercise in design. Make a section that runs it in place of your hand.
hiii u think its fake?
Muammer-Yildiz-(Patent-English) tiene un motor de solo imanes de neodimio, también existe un libro (a venta)que enseña a montarlo. Investigue.
I am also very skeptical of this device. If you are going to post it on RUclips then why not also include all dimensions, a view from every direction, a long distance view. This way someone like myself that is a machinist with 2 CNC machines at my disposable can make a device like it. Have the device running without your hand being on any part of the device. Enclose the device in clear plastic and on top of a clear piece of plastic. You also need to get rid of any music, which tends to cover up things like an air hose blowing on it. We want to make sure that this is not just another fake device. If the device is not a fake then someone else should be able to replicate it and get the same results. There are just way too many fakes on RUclips, I would say that 99.9999% are all fake.
next you will be saying that there is a spinning magnet behind the back board or under the table. Daniel is the king of inventions using magnets
@@valveman12 I totally agree. I do wish that people would stop putting up videos of devices that they know to do not work yet claim that they do work. I can only guess that they are looking for there 15 minutes of fame.
This is one aspect of famous invention the by an old Russian guy there is a huge patent file on it but he was very clever to have listed so many variations of each Parth that no one on record has yet been able to fully recreate it, it was demonstrated to not just sustain it's motion once started but it was able to hold it's rpm with considerable load with no loss
You can't make it work from whining. Just use still shots to make measurements.
Time to sell all your utility stocks Ricki 😊. The world is changing and the dead are going to be left behind. Enjoy your transition into Aquarius. Big Love 💞💞
Nice work only main problem is the kind of bearing your using that will only add drag slowing motor down
S'il vous plaît, ou est placé le ventilateur ?
Well, if nothing else it generated 45k views I guess.
is the base plate 3D printed? if yes, can you release the file for download?
GO DANIEL .....GO!!!!
"These 2 magnet need to line up..." but from minute 2:39 onwards ....where is the alignment?
I have already built this the rotor will move only if the stator will move somewhat
how about a video without music over the sound & a continuous shot, for obvious reasons, see motionmagnetics for a sure-fire way of a demonstration, for obvious reasons
are you going to sell this as a kit or not
O problema é justamente o "impulso" inicial... Se você conseguir fazer o rotor sair da inércia, sem necessidade de impulso, aí sim, tem ganho!!!!! Dessa maneira demonstrada, o que está acontecendo é um "retardo" do atrito das partes, em que se posterga a parada devido a pouca influência magnética provocada pelo "toque inicial" que, diga-se de passagem, é o que justamente não se consegue medir, pra saber qual força está sendo mais envolvente - mecânica inicial ou a magnética de flutuação.
Desculpa aí, mas só me convence se houver movimento sem toque inicial.
E não venha comparar com motor a explosão porque o "toque inicial" do motor a explosão tem o propósito totalmente diferente dos motores por interação magnética pura. Tanto que um motor elétrico de enrolamento, não precisa de "torque inicial "!!!!! Kkkkk
Grande abraço. Continue na pesquisa!!! Bora revolucionar!!!!
Actually what you say is true if you succeeded in generating a prefix of rotation without rotating it with your hand. Only near the stationary to the moving. And the moving house, then you will have succeeded
Very nice build.
And guys,
Please please please please please replicate Thane heins bitoroid overunity transformer.
I want to see its honest result.
is dosnt work. only OU is if you use tesla tech and ground it to suck electrons off earth, - and then it must have high turn low duty cycle coils for HV. and a very clean driver circuit. been there, done that. * but at that point its no longer a BITT
@@patrickwatkins7572 jln and woopy have replicated it successfully
@@overunityinventor can you like me to Jin pls, il tell you why it dosnt work. ... - ive made plenty of successful OU machines, - but the basic BITT concept dosnt work. - the theory is bunk and there is no source of possible excess energy.
@@overunityinventor what RPM have they been able to create
@@DJIzzyDC Thane hiens bitoroid transformer is not a rotary system, it's a transformer.
Pakistanis Loves Those who have innovative creativity ❤️
I would be happy if at least it could run forever, even not producing external energy ( a 1:1 energy device ). I think that using magnetic and gravitational forces in proper combinations, this can be achievable.
Fantastic work making this! Really impressive thanks for sharing. I don't suppose you can also share the model files for replication?
@@harrytopia282 na verdade não é falso não existe energia infinita sim só é instável pesquise por motor magnético mais já fizeram um carro com isso por que eles não usam isso para cidades? por que os imã esquenta muito eles simplesmente ia derreter ou deixar de ser um imã por causa do calor gerado pelo magnetismo não sei muito de imã mais ele esquenta por ficar muito tempo girando porisso e instável mais carrega celular e é bem legal
How many watts? 0.02?
clap clap daniel well done mate
dont forget to clap his father who makes all these inventions for him.
What is the polarity and order for the rotor?
= for a motor
= for a computer
= for a warp drive
Id say youve done it. Will it work if you move closer? If you need magnetic shielding I believe? that the the mount that holds the magnets on a hard drive is using magnetic shielding. But not 100% sure, it seems like that when i put them together.
Impossibile. Il susseguirsi di passaggi implica un accumulo di resistenza. NON PUÒ FUNZIONARE.
Srimposebol zasrańcu tępy!
Why you must use hand to spin the rotor?
It is not running by itself I suppose.
Надо Игорю отправить. Пусть проверит.
Wrap it with a stationary ring embedded with magnets. Your closer then most
Top👍
Would you send a replica to Brazil to be used for high school classes?
But doesn't work.
It's really working ! U can make our own free energy but your government says NO 😂
I am coming from a place of skepticism, as I have several earned University level degrees in the sciences and one in engineering --- says so right there on the diplomas. Even though I had skepticism, I tried several of the simpler versions of this general idea as the parts and so on weren't that expensive and found that my skepticism was well-founded. I think that I would have to have a lot more information, as what I think that I am seeing is a magic trick of some sort. And I am hearing some snappy music, too.
Because those that taught you ONLY teach one way, one language. Its in the title "Uni-vers-ity"".
@@apsert agree 👍. Unfortunately, many centers of education no longer teach you to problem solve, create and innovate, but to repeat dogma like "educated" parrots. This is coming from an electrical engineer and medical doctor.
The music probably covers up the sound of an air hose blowing on the rotor.
@@pm4995 that statement is incorrect, I took a class titled critical thinking in college, you can too.
the most "educated" ones are the most indoctrinated ones.
This doesn't work. Magnets need an external rotational magnet flux or another magnetic flux static but not aligned nor close to the magnet. Using another static magnet won't solve the problem, once the magnets stick to each other or their magnet fields align it's over, they won't move anymore. That's why you need windings and an alternating current in the case of AC motors, in the case of DC motors is a bit different, but you will still need windings and slips to maintain the motor constantly moving.
Another thing, permanent magnets motors, induction motors, and every type of motor have airgaps of 1.3 mm or less (0.020-0.050 inches normally for the guys who love inches). The gap must be as smaller as it can be. This motor has an air gap of centimeters, that wouldn't develop any useful torque.
Please, stop spreading this kind of videos, they are all fake.
You know as well as I that this type of 'motor' cannot work. It will move until it finds a place of balance and then it will stop. Under its own power it will not turn more than one revolution, and the output power will be so weak that it cannot do any useful work. I say this is a fake and it is being powered by an AC field from behind or under the desk.
Free Energie 🤔
= to have nano bots in there?
show the air compressor in the video
He doesn’t need air compressor, he just loops the video of it spinning and then resumes the original spin and it slowing down when he moves the magnets back.
And you don't want to use refrigerator magnets if that is all your used to. With all the fancy equipment you brag on you should be able to make something similar. He didn't post it for people like you to " believe" and be enlightened. He posted to make people who have a little creativity and curiosity think out of the box you can't seem to cnc your way out of. He's a brilliant kid and will give ole Musky a run for his money some day.
Is this REAL??
it's only a toy for magnetic dreamers
The problem with all these magnetic motors is that the magnets become depleted and the machine loses energy. If someone can show me how to overcome this then I will build one.
You have to shield your magnet on the side.. Flatten Magnetic fields
Muy bien chicos, lo más importante es seguir y seguir intentandolo asta lograrlo lo más difícil es siempre empezar.
Y ya lo hicieron, así q pa'lante.
Gran abrazo 🇨🇴.
Muy buen contenido.
How fast can you make it rotate, RPM?
you make it run with load
Do you sell 3D models?
Try don't touch with the hand.
You forget to use gear inside, neodymium magnet can be shifter to be neutral - last fastest speed, yes this are number one tech to how live sustainable without use to many resource for electric generator, if someone want blueprint i can make it for free.
Hi, when we will find it on you shop?
We were going to start selling some inventions about Nicola Tesla the around same time when Covid-19 hit, so we decided to pull back. At the moment, we are thinking of selling some kinds of inventions having to do with free energy motor models. There are a lot of patents out there about these kinds of topics that never got the light of day. Now we are not sure if all of those inventions ever worked, but it would be cool to have a small tabletop model for sale. As for this motor, it only works at this configuration and size, if you shrink things down to something small and inexpensive, the entire configuration on the motor will change which may result in the motor not working. To answer your question, we are planning on selling inventions once we hit 10k subscribers.
@@DanielsInventions I build a smaller prototype of this motor, about half, and it doesn't work in fact
@@DanielsInventions what happens if you put a Pyrolytic Graphite sheet of the same size up to the tower? Should actually rotate, right?
@@DanielsInventions never try to patent your Inventions, they consist of free energy and they will take it and eliminate you, we live in a world of consumption do not forget that.
what maximum RPM can make?
Genial si lo acerca gira más rápido?
there is no "slip point" .. go watch mr yildiz's design so you can build one that works..
Why you rotating the motor it shall run on its own whe you bring the aray of magnets to torque the rotor....please correct the video...
Why do gasoline engines require a starter motor....are thay fake?
Hola tienes alguna página para comprar .¿ gracias
good job! what happens if you get closer to the rotor magnets? does it speed up or slow it down?
Another guy had a successful replica of this prototype about 10 years ago. He used a hollow metal can to reduce the weight and also only a 1/4" long permanent magnet. His rotor weighed only 1 pound and was able to turn at 5-6 turns per second, ours has a rotor that weighs 10 pounds. The plastics alone are very heavy and have 72 1" long neodymium magnets. Our rotor spins at 1 turn per second at a distance of 2 or 3". Because the interaction between the rotor and stator is too strong at closer proximity, there's too much negative opposing forces between all the permanent magnets. We believe if there were additional arms on the stator around the rotor, then the gap between the two could be reduced and the speed could be increased.
@@DanielsInventions very interesting, thank you very much for your answer! 😊
There is no such thing as perpetual motion, it goes against the very laws of thermodynamics, I would say he is using a air compressor to spin the wheel and is using the music over the video to mask the sound of the compressor.
n s = nano bot smith?
Immaculate
Myര് machine
The power of wind! How come no audio brah why you masking the fan noise brah? meh! epic fake.
It's not a motor is only a circular motion.
very slow..you cannot produce power out of it..less torque..
It will require magnetic shielding to cancel out the backside of the permanent magnets. That would take a lot of time and money to build multiple new prototypes and see the improvements upon it.
👏👏👏
Is this real or fake? So many have tried to do this and failed. I hope this isn't another one of those gotcha trick video. Congratulations if it is real that would be unbelievable to me. If you upscale this you could create real power
We attempted a couple other times before and made a couple of videos about it: ruclips.net/video/dt8nqaXVaGk/видео.html, ruclips.net/video/Rkrfmo8OGT0/видео.html. We learned a lot from building those prototypes. At the end of the day, they did not work for forever, but we tried many different configurations on the setup and that increased the runtime by 500%. Lets say if the rotor can run for 1 minute after initial activation with the stator magnets being completely removed from the motor, then with the magnets installed into the stator the rotor would run for approximately 5 minutes and eventually wind down and come to a stop. That told us that we were heading into the right direction. The original inventor used custom made magnetic shielding that surrounds each and every magnet to focus all of the magnetic energy towards the gap between the rotor and stator. This one (as seen in the video) can turn constantly at only one turn per second, we are not sure if there is enough there to take power out of it for different usage. Our goal was just for us to see if we could get it to turn on its own. In the future we might make 1 more prototype of this kind and see if we can get the rotor to turn at high RPM and maybe even use some magnetic shielding.
@@DanielsInventions thanks for the reply. I am so glad this is a real working model. I myself is working on similar system using shielding. I'm going two steps forward and one step backwards 🙂👍. Looking forward to your next video on this shielded magnet motor. Additional note to your other video when you pulled out the magnets the rotor was lighter causing less rotational inertia with magnets installed a heavier rotor will spin longer anyway but I hope the magnets do help it spin longer
@@DanielsInventions thnx for being honest. However, u should also state this in the vid. I have also built this, after seeing yildiz, I set out. Made an adjustable version and tried every combination possible. What ends up happening is it turns into a very free flowing motion. kinda like a bearing. All the peaks and valleys get smoothed out and disappear.
I was kinda mad he frauded all that, caz I spent months on that, when I could have been doing real research. almost a year actually.
I call my device a timing calculator caz u can stack as many layers as u wish and adjust the spacing as u please. Once I can figure out how to get my old autodesk inventor files into freecad, i'll put it online so everyone can download/print & play with it.
Watch rotor mounting
Congratulations,, very very good job.👋👏
Its possible to move closer to the rotor, to understand better whats happen. Thanks.
magnets = for nano bots spining?
I don't see any torque
Hi how Magnet Pole Rotor?
6 Rotors with 12 magnets each.
@@DanielsInventions Great Job=) Do you sell the technical drawings and part list? I would like to buy it
Very very good idia can you me sale this invention
We want to sell some stuff but we are not sure what direction to go at this time. We know there are a lot of people out there that are working on their own free energy prototypes/patents. We have a lot of different CNC machineries that can cut a lot of very precise parts that are needed for attempting one of these inventions. We were thinking possible and hopefully soon to maybe begin selling DIY kits with parts needed for free energy motors. People could purchase and assemble all of the pieces together and install the permanent magnets and coils and so on. That would be a good start and they could do their testing and experimenting and inventing.
No way ! if you are talking about perpetual motion. This is a dream ... there is no free energy but there is cheap energy. This videos only for dream lovers ! If you can't explain using physics and geometry, that means it doesn't work! magnetic field, power vectors and geometrical explanations of such experiments can never be! You can see hundreds of studies on the internet, but you can't see the equation of even one of them. The frictional force based on motion, the attraction forces of magnets to each other, and even the friction of the air make this thought impossible!
Se realmente funcionasse, você estaria rico ou morto....(If it really worked, you'd be rich or dead.)
1500 $ ...FOR NORHING...!!!!THE NEODIN MAGNETS...VERY EXPENSIVS....
Какая херня )
Пока не пнёшь, не полетит :)
Ich denke er funktioniert nicht.
Bo jesteś za tępy.
No way can this work! This will still have a sticking point, because this was my first type of magnet motor i built!
edited
Супер🤝🤝🤝🤝🤝🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
ridiculous
No es efectivo
No sé porque pierden tanto el tiempo engañando a la gente en el minuto dos con 10 cuando impulsas el sistema se detiene muy rápido con el peso que tiene y los rodamientos no debiera de ocurrir esto debiera de girar mucho más tiempo no lo hace porque el motor que en realidad lo mueve lo está frenando a la prueba está que no acercas más los imanes para que ande más rápido no lo haces porque en realidad el motor que lo mueve no tiene fuerza para revolucionarlo más farsante todo lo hace por los likes
خدعة
better switch to my channel if you want to see real stuff
Due to the marketing style of this video, I can imagine why you could jump to the assumption that this is one of those scam channels if it's all you've seen. If you look at Daniel's earlier videos though, you'll see he's not a scammer, and is building legitimate tech.